/* LUFA Library Copyright (C) Dean Camera, 2009. dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ /** \file * * Master include file for the library USB functionality. This file should be included in all user projects making * use of the USB portions of the library, instead of including any headers in the USB/LowLevel or USB/HighLevel * directories. */ /** @defgroup Group_USB USB - LUFA/Drivers/USB/USB.h * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: * - LUFA/Drivers/USB/LowLevel/DevChapter9.c * - LUFA/Drivers/USB/LowLevel/Endpoint.c * - LUFA/Drivers/USB/LowLevel/Host.c * - LUFA/Drivers/USB/LowLevel/HostChapter9.c * - LUFA/Drivers/USB/LowLevel/LowLevel.c * - LUFA/Drivers/USB/LowLevel/Pipe.c * - LUFA/Drivers/USB/HighLevel/Events.c * - LUFA/Drivers/USB/HighLevel/USBInterrupt.c * - LUFA/Drivers/USB/HighLevel/USBTask.c * - LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c * * \section Module Description * Driver and framework for the USB controller hardware on the USB series of AVR microcontrollers. This module * consists of many submodules, and is designed to provide an easy way to configure and control USB host, device * or OTG mode USB applications. * * The USB stack requires the sole control over the USB controller in the microcontroller only; i.e. it does not * require any additional AVR timers, etc. to operate. This ensures that the USB stack requires as few resources * as possible. * * The USB stack can be used in Device Mode for connections to USB Hosts (see \ref Group_Device), in Host mode for * hosting of other USB devices (see \ref Group_Host), or as a dual role device which can either act as a USB host * or device depending on what peripheral is connected (see \ref Group_OTG). Both modes also require a common set * of USB management functions found \ref Group_USBManagement. */ /** \ingroup Group_USB * @defgroup Group_USBClassDrivers USB Class Drivers * * Drivers for both host and device mode of the standard USB classes, for rapid application development. * Class drivers give a framework which sits on top of the low level library API, allowing for standard * USB classes to be implemented in a project with minimal user code. These drivers can be used in * conjunction with the library low level APIs to implement interfaces both via the class drivers and via * the standard library APIs. * * Multiple device mode class drivers can be used within a project, including multiple instances of the * same class driver. In this way, USB Hosts and Devices can be made quickly using the internal class drivers * so that more time and effort can be put into the end application instead of the USB protocol. * * The available class drivers and their modes are listed below. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
USB ClassDevice ModeHost Mode
AudioYesNo
CDCYesYes
HIDYesYes
MIDIYesYes
Mass StorageYesYes
PrinterNoYes
RNDISYesYes
Still ImageNoYes
*/ #ifndef __USB_H__ #define __USB_H__ /* Includes: */ #include "HighLevel/USBMode.h" /* Preprocessor Checks: */ #if (!defined(USB_SERIES_2_AVR) && !defined(USB_SERIES_4_AVR) && \ !defined(USB_SERIES_6_AVR) && !defined(USB_SERIES_7_AVR)) #error The currently selected AVR model is not supported under the USB component of the LUFA library. #endif /* Includes: */ #include "HighLevel/USBTask.h" #include "HighLevel/USBInterrupt.h" #include "HighLevel/Events.h" #include "HighLevel/StdDescriptors.h" #include "LowLevel/LowLevel.h" #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) #include "LowLevel/Host.h" #include "LowLevel/HostChapter9.h" #include "LowLevel/Pipe.h" #endif #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) #include "LowLevel/Device.h" #include "LowLevel/DevChapter9.h" #include "LowLevel/Endpoint.h" #endif #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) #include "LowLevel/OTG.h" #endif #include "HighLevel/ConfigDescriptor.h" #endif