/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Test Application for the LUFA library * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Host/Device (Dual Role)
USB Class:N/A
USB Subclass:N/A
Relevant Standards:N/A
Usable Speeds:Low Speed Mode, Full Speed Mode
* * \section SSec_Description Project Description: * * Test application. Demonstrates several aspects of the LUFA * Library. On startup the current temperature will be printed * through the USART every 10 seconds, and the current joystick * position will be indicated via the LEDs on the selected board. * Pressing the HWB will initiate the USB subsystem, enumerating * the device (which has no actual functionality beyond * enumeration as a device or as a host in this demo, and serves * only to demonstrate the USB portion of the library). It will * also suspend the joystick and temperature monitoring tasks. * * Pressing the HWB a second time will turn off the USB system * and resume the temperature printing task (but not the joystick * monitoring task). * * When activated, the USB events will be printed through the * serial USART. * * When the USB subsystem is activated, the board LEDs will show * the current USB status. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * *
* None *
*/