/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Mass Storage Host Demo * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Host
USB Class:Mass Storage Device
USB Subclass:Bulk Only
Relevant Standards:USBIF Mass Storage StandardUSB Bulk-Only Transport StandardSCSI Primary Commands SpecificationSCSI Block Commands Specification
Usable Speeds:Full Speed Mode
* * \section SSec_Description Project Description: * * Mass Storage host demonstration application. This gives a simple reference * application for implementing a USB Mass Storage host, for USB storage devices * using the standard Mass Storage USB profile. * * The first 512 bytes (boot sector) of an attached disk's memory will be dumped * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287 * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents * of the disk will be dumped to the serial port. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * *
* None *
*/