/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Keyboard Host Demo * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Host
USB Class:Human Interface Device (HID)
USB Subclass:N/A
Relevant Standards:USBIF HID Specification, USBIF HID Usage Tables
Usable Speeds:Low Speed Mode, Full Speed Mode
* * \section SSec_Description Project Description: * * Keyboard host demonstration application. This gives a simple reference * application for implementing a USB keyboard, for USB keyboards using * the standard keyboard HID profile. * * Pressed alpha-numeric, enter or space key is transmitted through the serial * USART at serial settings 9600, 8, N, 1. * * This uses a naive method where the keyboard is set to Boot Protocol mode, so * that the report structure is fixed and known. A better implementation * uses the HID report parser for correct report data processing across * all compatible mice with advanced characteristics, as shown in the * KeyboardHostWithParser demo application. * * Currently only single interface keyboards are supported. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * * * * * * * * *
Define Name:Location:Description:
INTERRUPT_DATA_ENDPOINTMakefile CDEFSWhen defined, this causes the demo to enable interrupts for the data pipe, * which services reports from the device. If not defined, the data pipe is * serviced via polling using the task scheduler.
*/