/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Mouse Device Demo * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Human Interface Device (HID)
USB Subclass:N/A
Relevant Standards:USBIF HID Specification, USBIF HID Usage Tables
Usable Speeds:Low Speed Mode, Full Speed Mode
* * \section SSec_Description Project Description: * * Mouse demonstration application. This gives a simple reference * application for implementing a USB Mouse using the basic USB HID * drivers in all modern OSes (i.e. no special drivers required). It is * boot protocol compatible, and thus works under compatible BIOS as if * it was a native mouse (e.g. PS/2). * * On startup the system will automatically enumerate and function * as a mouse when the USB connection to a host is present. To use * the mouse, move the joystick to move the pointer, and push the * joystick inwards to simulate a left-button click. The HWB serves as * the right mouse button. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * * * * * * * * * * * * * *
Define Name:Location:Description:
INTERRUPT_CONTROL_ENDPOINTMakefile CDEFSWhen defined, this causes the demo to enable interrupts for the control endpoint, * which services control requests from the host. If not defined, the control endpoint * is serviced via polling using the task scheduler.
INTERRUPT_DATA_ENDPOINTMakefile CDEFSWhen defined, this causes the demo to enable interrupts for the data endpoint, * which services outgoing mouse button and movement reports to the host. If not defined, * the data endpoint is serviced via polling using the task scheduler.
*/