/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Audio Input Device Demo * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - Series 7 USB AVRs (AT90USBxxx7) * - Series 6 USB AVRs (AT90USBxxx6) * - Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Audio Class
USB Subclass:Standard Audio Device
Relevant Standards:USBIF Audio 1.0 Class Specification \n * USBIF Audio 1.0 Class Terminal Types Specification \n * USBIF Audio 1.0 Data Formats Specification
Usable Speeds:Full Speed Mode
* * \section Sec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Input device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). * * On start-up the system will automatically enumerate and function as a * USB microphone. By default, the demo will produce a square wave test tone * when the board button is pressed. If USE_TEST_TONE is not defined in the * project makefile, incoming audio from the ADC channel 1 will be sampled * and sent to the host computer instead. * * When in microphone mode, connect a microphone to the ADC channel 2. * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * * * * * * * * * * * * * *
Define Name:Location:Description:
USE_TEST_TONEMakefile LUFA_OPTSWhen defined, this alters the demo to produce a square wave test tone when the first board button is pressed * instead of sampling the board microphone.
MICROPHONE_BIASED_TO_HALF_RAILMakefile LUFA_OPTSWhen defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.
*/