/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage CDC Class USB AVR Bootloader * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * * * * * * * * * * * * * * * * * * * * * *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Usable Speeds:Full Speed Mode
* * \section SSec_Description Project Description: * * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109 * protocol compatible programming software to load firmware onto the AVR. * * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU * values in the accompanying makefile. * * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * * * * * * * * * * *
Define Name:Location:Description:
SIGNATURE_0, SIGNATURE_1, SIGNATURE_2Makefile CDEFSAVR part signature bytes. These are normally defined as part of the AVR device header files in recent avr-libc * distributions. If your avr-libc library is out of date and does not define these values, you can define them * manually in the makefile CDEFS.
*/