From 6e29655b5473c6f8235b72654f9aae9cfeb9b078 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 7 Jun 2012 20:49:47 +0000 Subject: Update SVN line endings property on newer source files to native. --- Projects/SerialToLCD/SerialToLCD.txt | 194 +++++++++++++++++------------------ Projects/SerialToLCD/makefile | 70 ++++++------- 2 files changed, 132 insertions(+), 132 deletions(-) (limited to 'Projects') diff --git a/Projects/SerialToLCD/SerialToLCD.txt b/Projects/SerialToLCD/SerialToLCD.txt index 8058ee52d..cb30b6bc2 100644 --- a/Projects/SerialToLCD/SerialToLCD.txt +++ b/Projects/SerialToLCD/SerialToLCD.txt @@ -1,97 +1,97 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project - * - * \section Sec_Compat Project Compatibility: - * - * The following list indicates what microcontrollers are compatible with this project. - * - * \li AT90USB162 - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this project. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Supported USB Speeds:Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This - * project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial - * link, so that data supplied by the host can be written to the display. This project is - * designed to use the Minimum USB AVR board, however it can be modified to suit other hardware - * if desired. - * - * LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n - * More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n - * - * Below are the connections between the AVR Minimus board and LCD. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
AVR Pin:HD44780 LCD Pin:
VCCVCC
GNDGND
PD0DB4
PD1DB5
PD2DB6
PD3DB7
PD4/RS
GND/RW
PD7/E
- */ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * \li AT90USB162 + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Supported USB Speeds:Full Speed Mode
+ * + * \section Sec_Description Project Description: + * + * Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This + * project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial + * link, so that data supplied by the host can be written to the display. This project is + * designed to use the Minimum USB AVR board, however it can be modified to suit other hardware + * if desired. + * + * LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n + * More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n + * + * Below are the connections between the AVR Minimus board and LCD. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
AVR Pin:HD44780 LCD Pin:
VCCVCC
GNDGND
PD0DB4
PD1DB5
PD2DB6
PD3DB7
PD4/RS
GND/RW
PD7/E
+ */ diff --git a/Projects/SerialToLCD/makefile b/Projects/SerialToLCD/makefile index 4c1fdef61..2c74f5fbc 100644 --- a/Projects/SerialToLCD/makefile +++ b/Projects/SerialToLCD/makefile @@ -1,35 +1,35 @@ -# -# LUFA Library -# Copyright (C) Dean Camera, 2012. -# -# dean [at] fourwalledcubicle [dot] com -# www.lufa-lib.org -# -# -------------------------------------- -# LUFA Project Makefile. -# -------------------------------------- - -MCU = at90usb162 -ARCH = AVR8 -BOARD = MINIMUS -F_CPU = 16000000 -F_USB = $(F_CPU) -OPTIMIZATION = s -TARGET = SerialToLCD -SRC = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) -LUFA_PATH = ../../LUFA/ -CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -LD_FLAGS = - -# Default target -all: - -# Include LUFA build script makefiles -include $(LUFA_PATH)/Build/lufa.core.in -include $(LUFA_PATH)/Build/lufa.sources.in -include $(LUFA_PATH)/Build/lufa.build.in -include $(LUFA_PATH)/Build/lufa.cppcheck.in -include $(LUFA_PATH)/Build/lufa.doxygen.in -include $(LUFA_PATH)/Build/lufa.dfu.in -include $(LUFA_PATH)/Build/lufa.avrdude.in -include $(LUFA_PATH)/Build/lufa.atprogram.in +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +MCU = at90usb162 +ARCH = AVR8 +BOARD = MINIMUS +F_CPU = 16000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = SerialToLCD +SRC = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) +LUFA_PATH = ../../LUFA/ +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ +LD_FLAGS = + +# Default target +all: + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa.core.in +include $(LUFA_PATH)/Build/lufa.sources.in +include $(LUFA_PATH)/Build/lufa.build.in +include $(LUFA_PATH)/Build/lufa.cppcheck.in +include $(LUFA_PATH)/Build/lufa.doxygen.in +include $(LUFA_PATH)/Build/lufa.dfu.in +include $(LUFA_PATH)/Build/lufa.avrdude.in +include $(LUFA_PATH)/Build/lufa.atprogram.in -- cgit v1.2.3