From 1ed6925b5bf417848b83887b32e3ede05a1c691b Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 2 Dec 2009 12:02:01 +0000 Subject: Factor out all the ISP related code into a seperate ISPProtocol set of files in the AVRISP Clone programmer project, to clearly seperate out the programming protocols when PDI programming is implemented. --- Projects/AVRISP/Lib/ISPProtocol.c | 467 ++++++++++++++++++++++++++++++ Projects/AVRISP/Lib/ISPProtocol.h | 67 +++++ Projects/AVRISP/Lib/V2Protocol.c | 445 ++-------------------------- Projects/AVRISP/Lib/V2Protocol.h | 40 ++- Projects/AVRISP/Lib/V2ProtocolConstants.h | 43 +++ Projects/AVRISP/Lib/V2ProtocolParams.c | 2 +- Projects/AVRISP/Lib/V2ProtocolParams.h | 1 + Projects/AVRISP/Lib/V2ProtocolTarget.c | 19 +- Projects/AVRISP/Lib/V2ProtocolTarget.h | 36 +-- Projects/AVRISP/makefile | 1 + 10 files changed, 636 insertions(+), 485 deletions(-) create mode 100644 Projects/AVRISP/Lib/ISPProtocol.c create mode 100644 Projects/AVRISP/Lib/ISPProtocol.h (limited to 'Projects') diff --git a/Projects/AVRISP/Lib/ISPProtocol.c b/Projects/AVRISP/Lib/ISPProtocol.c new file mode 100644 index 000000000..bfd917a09 --- /dev/null +++ b/Projects/AVRISP/Lib/ISPProtocol.c @@ -0,0 +1,467 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * ISP Protocol handler, to process V2 Protocol wrapped ISP commands used in Atmel programmer devices. + */ + +#include "ISPProtocol.h" + +/** Handler for the CMD_ENTER_PROGMODE_ISP command, which attempts to enter programming mode on + * the attached device, returning success or failure back to the host. + */ +void ISPProtocol_EnterISPMode(void) +{ + struct + { + uint8_t TimeoutMS; + uint8_t PinStabDelayMS; + uint8_t ExecutionDelayMS; + uint8_t SynchLoops; + uint8_t ByteDelay; + uint8_t PollValue; + uint8_t PollIndex; + uint8_t EnterProgBytes[4]; + } Enter_ISP_Params; + + Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ResponseStatus = STATUS_CMD_FAILED; + + CurrentAddress = 0; + + V2Protocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS); + SPI_Init(ISPTarget_GetSPIPrescalerMask() | SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_MODE_MASTER); + + while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED)) + { + uint8_t ResponseBytes[4]; + + ISPTarget_ChangeTargetResetLine(true); + V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS); + + for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) + { + V2Protocol_DelayMS(Enter_ISP_Params.ByteDelay); + ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]); + } + + /* Check if polling disabled, or if the polled value matches the expected value */ + if (!(Enter_ISP_Params.PollIndex) || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue)) + { + ResponseStatus = STATUS_CMD_OK; + } + else + { + ISPTarget_ChangeTargetResetLine(false); + V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS); + } + } + + Endpoint_Write_Byte(CMD_ENTER_PROGMODE_ISP); + Endpoint_Write_Byte(ResponseStatus); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_LEAVE_ISP command, which releases the target from programming mode. */ +void ISPProtocol_LeaveISPMode(void) +{ + struct + { + uint8_t PreDelayMS; + uint8_t PostDelayMS; + } Leave_ISP_Params; + + Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + V2Protocol_DelayMS(Leave_ISP_Params.PreDelayMS); + ISPTarget_ChangeTargetResetLine(false); + SPI_ShutDown(); + V2Protocol_DelayMS(Leave_ISP_Params.PostDelayMS); + + Endpoint_Write_Byte(CMD_LEAVE_PROGMODE_ISP); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes, + * words or pages of data to the attached device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_ProgramMemory(uint8_t V2Command) +{ + struct + { + uint16_t BytesToWrite; + uint8_t ProgrammingMode; + uint8_t DelayMS; + uint8_t ProgrammingCommands[3]; + uint8_t PollValue1; + uint8_t PollValue2; + uint8_t ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the + } Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting + + Endpoint_Read_Stream_LE(&Write_Memory_Params, sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData)); + Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite); + + if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData)) + { + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_FAILED); + Endpoint_ClearIN(); + return; + } + + Endpoint_Read_Stream_LE(&Write_Memory_Params.ProgData, Write_Memory_Params.BytesToWrite); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ProgrammingStatus = STATUS_CMD_OK; + uint16_t PollAddress = 0; + uint8_t PollValue = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 : + Write_Memory_Params.PollValue2; + uint8_t* NextWriteByte = Write_Memory_Params.ProgData; + + if (MustSetAddress) + { + if (CurrentAddress & (1UL << 31)) + ISPTarget_LoadExtendedAddress(); + + MustSetAddress = false; + } + + if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK) + { + uint16_t StartAddress = (CurrentAddress & 0xFFFF); + + /* Paged mode memory programming */ + for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++) + { + bool IsOddByte = (CurrentByte & 0x01); + uint8_t ByteToWrite = *(NextWriteByte++); + + if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK; + else + Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK; + + SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); + SPI_SendByte(CurrentAddress >> 8); + SPI_SendByte(CurrentAddress & 0xFF); + SPI_SendByte(ByteToWrite); + + if (!(PollAddress) && (ByteToWrite != PollValue)) + { + if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK; + + PollAddress = (CurrentAddress & 0xFFFF); + } + + if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP)) + CurrentAddress++; + } + + /* If the current page must be committed, send the PROGRAM PAGE command to the target */ + if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK) + { + SPI_SendByte(Write_Memory_Params.ProgrammingCommands[1]); + SPI_SendByte(StartAddress >> 8); + SPI_SendByte(StartAddress & 0xFF); + SPI_SendByte(0x00); + + /* Check if polling is possible, if not switch to timed delay mode */ + if (!(PollAddress)) + { + Write_Memory_Params.ProgrammingMode &= ~PROG_MODE_PAGED_VALUE_MASK; + Write_Memory_Params.ProgrammingMode |= PROG_MODE_PAGED_TIMEDELAY_MASK; + } + + ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue, + Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]); + } + } + else + { + /* Word/byte mode memory programming */ + for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++) + { + bool IsOddByte = (CurrentByte & 0x01); + uint8_t ByteToWrite = *(NextWriteByte++); + + if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK; + else + Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK; + + SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); + SPI_SendByte(CurrentAddress >> 8); + SPI_SendByte(CurrentAddress & 0xFF); + SPI_SendByte(ByteToWrite); + + if (ByteToWrite != PollValue) + { + if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) + Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK; + + PollAddress = (CurrentAddress & 0xFFFF); + } + + if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP)) + CurrentAddress++; + + ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue, + Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]); + + if (ProgrammingStatus != STATUS_CMD_OK) + break; + } + } + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(ProgrammingStatus); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes, + * words or pages of data from the attached device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_ReadMemory(uint8_t V2Command) +{ + struct + { + uint16_t BytesToRead; + uint8_t ReadMemoryCommand; + } Read_Memory_Params; + + Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params)); + Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_OK); + + if (MustSetAddress) + { + if (CurrentAddress & (1UL << 31)) + ISPTarget_LoadExtendedAddress(); + + MustSetAddress = false; + } + + for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++) + { + bool IsOddByte = (CurrentByte & 0x01); + + if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) + Read_Memory_Params.ReadMemoryCommand |= READ_WRITE_HIGH_BYTE_MASK; + else + Read_Memory_Params.ReadMemoryCommand &= ~READ_WRITE_HIGH_BYTE_MASK; + + SPI_SendByte(Read_Memory_Params.ReadMemoryCommand); + SPI_SendByte(CurrentAddress >> 8); + SPI_SendByte(CurrentAddress & 0xFF); + Endpoint_Write_Byte(SPI_ReceiveByte()); + + /* Check if the endpoint bank is currently full */ + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearIN(); + Endpoint_WaitUntilReady(); + } + + if ((IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) || (V2Command == CMD_READ_EEPROM_ISP)) + CurrentAddress++; + } + + Endpoint_Write_Byte(STATUS_CMD_OK); + + bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed()); + Endpoint_ClearIN(); + + /* Ensure last packet is a short packet to terminate the transfer */ + if (IsEndpointFull) + { + Endpoint_WaitUntilReady(); + Endpoint_ClearIN(); + Endpoint_WaitUntilReady(); + } +} + +/** Handler for the CMD_CHI_ERASE_ISP command, clearing the target's FLASH memory. */ +void ISPProtocol_ChipErase(void) +{ + struct + { + uint8_t EraseDelayMS; + uint8_t PollMethod; + uint8_t EraseCommandBytes[4]; + } Erase_Chip_Params; + + Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ResponseStatus = STATUS_CMD_OK; + + for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++) + SPI_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]); + + if (!(Erase_Chip_Params.PollMethod)) + V2Protocol_DelayMS(Erase_Chip_Params.EraseDelayMS); + else + ResponseStatus = ISPTarget_WaitWhileTargetBusy(); + + Endpoint_Write_Byte(CMD_CHIP_ERASE_ISP); + Endpoint_Write_Byte(ResponseStatus); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands, + * reading the requested configuration byte from the device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command) +{ + struct + { + uint8_t RetByte; + uint8_t ReadCommandBytes[4]; + } Read_FuseLockSigOSCCAL_Params; + + Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ResponseBytes[4]; + + for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) + ResponseBytes[RByte] = SPI_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration + * byte to the device. + * + * \param[in] V2Command Issued V2 Protocol command byte from the host + */ +void ISPProtocol_WriteFuseLock(uint8_t V2Command) +{ + struct + { + uint8_t WriteCommandBytes[4]; + } Write_FuseLockSig_Params; + + Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params)); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++) + SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]); + + Endpoint_Write_Byte(V2Command); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_SPI_MULTI command, writing and reading arbitrary SPI data to and from the attached device. */ +void ISPProtocol_SPIMulti(void) +{ + struct + { + uint8_t TxBytes; + uint8_t RxBytes; + uint8_t RxStartAddr; + uint8_t TxData[255]; + } SPI_Multi_Params; + + Endpoint_Read_Stream_LE(&SPI_Multi_Params, sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData)); + Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes); + + Endpoint_ClearOUT(); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_Byte(CMD_SPI_MULTI); + Endpoint_Write_Byte(STATUS_CMD_OK); + + uint8_t CurrTxPos = 0; + uint8_t CurrRxPos = 0; + + /* Write out bytes to transmit until the start of the bytes to receive is met */ + while (CurrTxPos < SPI_Multi_Params.RxStartAddr) + { + if (CurrTxPos < SPI_Multi_Params.TxBytes) + SPI_SendByte(SPI_Multi_Params.TxData[CurrTxPos]); + else + SPI_SendByte(0); + + CurrTxPos++; + } + + /* Transmit remaining bytes with padding as needed, read in response bytes */ + while (CurrRxPos < SPI_Multi_Params.RxBytes) + { + if (CurrTxPos < SPI_Multi_Params.TxBytes) + Endpoint_Write_Byte(SPI_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++])); + else + Endpoint_Write_Byte(SPI_ReceiveByte()); + + CurrRxPos++; + } + + Endpoint_Write_Byte(STATUS_CMD_OK); + Endpoint_ClearIN(); +} diff --git a/Projects/AVRISP/Lib/ISPProtocol.h b/Projects/AVRISP/Lib/ISPProtocol.h new file mode 100644 index 000000000..5a91f59e3 --- /dev/null +++ b/Projects/AVRISP/Lib/ISPProtocol.h @@ -0,0 +1,67 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for ISPProtocol.c. + */ + +#ifndef _ISP_PROTOCOL_ +#define _ISP_PROTOCOL_ + + /* Includes: */ + #include + + #include "V2Protocol.h" + + /* Macros: */ + /** Mask for the reading or writing of the high byte in a FLASH word when issuing a low-level programming command */ + #define READ_WRITE_HIGH_BYTE_MASK (1 << 3) + + #define PROG_MODE_PAGED_WRITES_MASK (1 << 0) + #define PROG_MODE_WORD_TIMEDELAY_MASK (1 << 1) + #define PROG_MODE_WORD_VALUE_MASK (1 << 2) + #define PROG_MODE_WORD_READYBUSY_MASK (1 << 3) + #define PROG_MODE_PAGED_TIMEDELAY_MASK (1 << 4) + #define PROG_MODE_PAGED_VALUE_MASK (1 << 5) + #define PROG_MODE_PAGED_READYBUSY_MASK (1 << 6) + #define PROG_MODE_COMMIT_PAGE_MASK (1 << 7) + + /* Function Prototypes: */ + void ISPProtocol_EnterISPMode(void); + void ISPProtocol_LeaveISPMode(void); + void ISPProtocol_ProgramMemory(uint8_t V2Command); + void ISPProtocol_ReadMemory(uint8_t V2Command); + void ISPProtocol_ChipErase(void); + void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command); + void ISPProtocol_WriteFuseLock(uint8_t V2Command); + void ISPProtocol_SPIMulti(void); + +#endif diff --git a/Projects/AVRISP/Lib/V2Protocol.c b/Projects/AVRISP/Lib/V2Protocol.c index e45be5401..c0028f72a 100644 --- a/Projects/AVRISP/Lib/V2Protocol.c +++ b/Projects/AVRISP/Lib/V2Protocol.c @@ -36,6 +36,13 @@ #define INCLUDE_FROM_V2PROTOCOL_C #include "V2Protocol.h" +/** Current memory address for FLASH/EEPROM memory read/write commands */ +uint32_t CurrentAddress; + +/** Flag to indicate that the next read/write operation must update the device's current address */ +bool MustSetAddress; + + /** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host. * This routine decodes the issued command and passes off the handling of the command to the * appropriate function. @@ -60,34 +67,38 @@ void V2Protocol_ProcessCommand(void) V2Protocol_ResetProtection(); break; case CMD_ENTER_PROGMODE_ISP: - V2Protocol_ISP_EnterISPMode(); + ISPProtocol_EnterISPMode(); break; case CMD_LEAVE_PROGMODE_ISP: - V2Protocol_ISP_LeaveISPMode(); + ISPProtocol_LeaveISPMode(); break; case CMD_PROGRAM_FLASH_ISP: case CMD_PROGRAM_EEPROM_ISP: - V2Protocol_ISP_ProgramMemory(V2Command); + ISPProtocol_ProgramMemory(V2Command); break; case CMD_READ_FLASH_ISP: case CMD_READ_EEPROM_ISP: - V2Protocol_ISP_ReadMemory(V2Command); + ISPProtocol_ReadMemory(V2Command); break; case CMD_CHIP_ERASE_ISP: - V2Protocol_ISP_ChipErase(); + ISPProtocol_ChipErase(); break; +#if defined(ENABLE_XPROG_PROTOCOL) + case CMD_XPROG_SETMODE: + V2Protocol_XPROG_SetMode(); +#endif case CMD_READ_FUSE_ISP: case CMD_READ_LOCK_ISP: case CMD_READ_SIGNATURE_ISP: case CMD_READ_OSCCAL_ISP: - V2Protocol_ISP_ReadFuseLockSigOSCCAL(V2Command); + ISPProtocol_ReadFuseLockSigOSCCAL(V2Command); break; case CMD_PROGRAM_FUSE_ISP: case CMD_PROGRAM_LOCK_ISP: - V2Protocol_ISP_WriteFuseLock(V2Command); + ISPProtocol_WriteFuseLock(V2Command); break; case CMD_SPI_MULTI: - V2Protocol_ISP_SPIMulti(); + ISPProtocol_SPIMulti(); break; default: V2Protocol_UnknownCommand(V2Command); @@ -196,425 +207,9 @@ static void V2Protocol_LoadAddress(void) Endpoint_ClearOUT(); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - if (CurrentAddress & (1UL << 31)) - V2Protocol_LoadExtendedAddress(); + MustSetAddress = true; Endpoint_Write_Byte(CMD_LOAD_ADDRESS); Endpoint_Write_Byte(STATUS_CMD_OK); Endpoint_ClearIN(); } - -/** Handler for the CMD_ENTER_PROGMODE_ISP command, which attempts to enter programming mode on - * the attached device, returning success or failure back to the host. - */ -static void V2Protocol_ISP_EnterISPMode(void) -{ - struct - { - uint8_t TimeoutMS; - uint8_t PinStabDelayMS; - uint8_t ExecutionDelayMS; - uint8_t SynchLoops; - uint8_t ByteDelay; - uint8_t PollValue; - uint8_t PollIndex; - uint8_t EnterProgBytes[4]; - } Enter_ISP_Params; - - Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params)); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - uint8_t ResponseStatus = STATUS_CMD_FAILED; - - CurrentAddress = 0; - - V2Protocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS); - SPI_Init(V2Protocol_GetSPIPrescalerMask() | SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_MODE_MASTER); - - while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED)) - { - uint8_t ResponseBytes[4]; - - V2Protocol_ChangeTargetResetLine(true); - V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS); - - for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) - { - V2Protocol_DelayMS(Enter_ISP_Params.ByteDelay); - ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]); - } - - /* Check if polling disabled, or if the polled value matches the expected value */ - if (!(Enter_ISP_Params.PollIndex) || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue)) - { - ResponseStatus = STATUS_CMD_OK; - } - else - { - V2Protocol_ChangeTargetResetLine(false); - V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS); - } - } - - Endpoint_Write_Byte(CMD_ENTER_PROGMODE_ISP); - Endpoint_Write_Byte(ResponseStatus); - Endpoint_ClearIN(); -} - -/** Handler for the CMD_LEAVE_ISP command, which releases the target from programming mode. */ -static void V2Protocol_ISP_LeaveISPMode(void) -{ - struct - { - uint8_t PreDelayMS; - uint8_t PostDelayMS; - } Leave_ISP_Params; - - Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params)); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - V2Protocol_DelayMS(Leave_ISP_Params.PreDelayMS); - V2Protocol_ChangeTargetResetLine(false); - SPI_ShutDown(); - V2Protocol_DelayMS(Leave_ISP_Params.PostDelayMS); - - Endpoint_Write_Byte(CMD_LEAVE_PROGMODE_ISP); - Endpoint_Write_Byte(STATUS_CMD_OK); - Endpoint_ClearIN(); -} - -/** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes, - * words or pages of data to the attached device. - * - * \param[in] V2Command Issued V2 Protocol command byte from the host - */ -static void V2Protocol_ISP_ProgramMemory(uint8_t V2Command) -{ - struct - { - uint16_t BytesToWrite; - uint8_t ProgrammingMode; - uint8_t DelayMS; - uint8_t ProgrammingCommands[3]; - uint8_t PollValue1; - uint8_t PollValue2; - uint8_t ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the - } Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting - - Endpoint_Read_Stream_LE(&Write_Memory_Params, sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData)); - Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite); - - if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData)) - { - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - Endpoint_Write_Byte(V2Command); - Endpoint_Write_Byte(STATUS_CMD_FAILED); - Endpoint_ClearIN(); - return; - } - - Endpoint_Read_Stream_LE(&Write_Memory_Params.ProgData, Write_Memory_Params.BytesToWrite); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - uint8_t ProgrammingStatus = STATUS_CMD_OK; - uint16_t PollAddress = 0; - uint8_t PollValue = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 : - Write_Memory_Params.PollValue2; - uint8_t* NextWriteByte = Write_Memory_Params.ProgData; - - if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK) - { - uint16_t StartAddress = (CurrentAddress & 0xFFFF); - - /* Paged mode memory programming */ - for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++) - { - bool IsOddByte = (CurrentByte & 0x01); - uint8_t ByteToWrite = *(NextWriteByte++); - - if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) - Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK; - else - Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK; - - SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); - SPI_SendByte(CurrentAddress >> 8); - SPI_SendByte(CurrentAddress & 0xFF); - SPI_SendByte(ByteToWrite); - - if (!(PollAddress) && (ByteToWrite != PollValue)) - { - if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) - Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK; - - PollAddress = (CurrentAddress & 0xFFFF); - } - - if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP)) - CurrentAddress++; - } - - /* If the current page must be committed, send the PROGRAM PAGE command to the target */ - if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK) - { - SPI_SendByte(Write_Memory_Params.ProgrammingCommands[1]); - SPI_SendByte(StartAddress >> 8); - SPI_SendByte(StartAddress & 0xFF); - SPI_SendByte(0x00); - - /* Check if polling is possible, if not switch to timed delay mode */ - if (!(PollAddress)) - { - Write_Memory_Params.ProgrammingMode &= ~PROG_MODE_PAGED_VALUE_MASK; - Write_Memory_Params.ProgrammingMode |= PROG_MODE_PAGED_TIMEDELAY_MASK; - } - - ProgrammingStatus = V2Protocol_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue, - Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]); - } - } - else - { - /* Word/byte mode memory programming */ - for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++) - { - bool IsOddByte = (CurrentByte & 0x01); - uint8_t ByteToWrite = *(NextWriteByte++); - - if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) - Write_Memory_Params.ProgrammingCommands[0] |= READ_WRITE_HIGH_BYTE_MASK; - else - Write_Memory_Params.ProgrammingCommands[0] &= ~READ_WRITE_HIGH_BYTE_MASK; - - SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); - SPI_SendByte(CurrentAddress >> 8); - SPI_SendByte(CurrentAddress & 0xFF); - SPI_SendByte(ByteToWrite); - - if (ByteToWrite != PollValue) - { - if (IsOddByte && (V2Command == CMD_PROGRAM_FLASH_ISP)) - Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK; - - PollAddress = (CurrentAddress & 0xFFFF); - } - - if (IsOddByte || (V2Command == CMD_PROGRAM_EEPROM_ISP)) - CurrentAddress++; - - ProgrammingStatus = V2Protocol_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue, - Write_Memory_Params.DelayMS, Write_Memory_Params.ProgrammingCommands[2]); - - if (ProgrammingStatus != STATUS_CMD_OK) - break; - } - } - - Endpoint_Write_Byte(V2Command); - Endpoint_Write_Byte(ProgrammingStatus); - Endpoint_ClearIN(); -} - -/** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes, - * words or pages of data from the attached device. - * - * \param[in] V2Command Issued V2 Protocol command byte from the host - */ -static void V2Protocol_ISP_ReadMemory(uint8_t V2Command) -{ - struct - { - uint16_t BytesToRead; - uint8_t ReadMemoryCommand; - } Read_Memory_Params; - - Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params)); - Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - Endpoint_Write_Byte(V2Command); - Endpoint_Write_Byte(STATUS_CMD_OK); - - for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++) - { - bool IsOddByte = (CurrentByte & 0x01); - - if (IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) - Read_Memory_Params.ReadMemoryCommand |= READ_WRITE_HIGH_BYTE_MASK; - else - Read_Memory_Params.ReadMemoryCommand &= ~READ_WRITE_HIGH_BYTE_MASK; - - SPI_SendByte(Read_Memory_Params.ReadMemoryCommand); - SPI_SendByte(CurrentAddress >> 8); - SPI_SendByte(CurrentAddress & 0xFF); - Endpoint_Write_Byte(SPI_ReceiveByte()); - - /* Check if the endpoint bank is currently full */ - if (!(Endpoint_IsReadWriteAllowed())) - { - Endpoint_ClearIN(); - Endpoint_WaitUntilReady(); - } - - if ((IsOddByte && (V2Command == CMD_READ_FLASH_ISP)) || (V2Command == CMD_READ_EEPROM_ISP)) - CurrentAddress++; - } - - Endpoint_Write_Byte(STATUS_CMD_OK); - - bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed()); - Endpoint_ClearIN(); - - /* Ensure last packet is a short packet to terminate the transfer */ - if (IsEndpointFull) - { - Endpoint_WaitUntilReady(); - Endpoint_ClearIN(); - Endpoint_WaitUntilReady(); - } -} - -/** Handler for the CMD_CHI_ERASE_ISP command, clearing the target's FLASH memory. */ -static void V2Protocol_ISP_ChipErase(void) -{ - struct - { - uint8_t EraseDelayMS; - uint8_t PollMethod; - uint8_t EraseCommandBytes[4]; - } Erase_Chip_Params; - - Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params)); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - uint8_t ResponseStatus = STATUS_CMD_OK; - - for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++) - SPI_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]); - - if (!(Erase_Chip_Params.PollMethod)) - V2Protocol_DelayMS(Erase_Chip_Params.EraseDelayMS); - else - ResponseStatus = V2Protocol_WaitWhileTargetBusy(); - - Endpoint_Write_Byte(CMD_CHIP_ERASE_ISP); - Endpoint_Write_Byte(ResponseStatus); - Endpoint_ClearIN(); -} - -/** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands, - * reading the requested configuration byte from the device. - * - * \param[in] V2Command Issued V2 Protocol command byte from the host - */ -static void V2Protocol_ISP_ReadFuseLockSigOSCCAL(uint8_t V2Command) -{ - struct - { - uint8_t RetByte; - uint8_t ReadCommandBytes[4]; - } Read_FuseLockSigOSCCAL_Params; - - Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params)); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - uint8_t ResponseBytes[4]; - - for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) - ResponseBytes[RByte] = SPI_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]); - - Endpoint_Write_Byte(V2Command); - Endpoint_Write_Byte(STATUS_CMD_OK); - Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]); - Endpoint_Write_Byte(STATUS_CMD_OK); - Endpoint_ClearIN(); -} - -/** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration - * byte to the device. - * - * \param[in] V2Command Issued V2 Protocol command byte from the host - */ -static void V2Protocol_ISP_WriteFuseLock(uint8_t V2Command) -{ - struct - { - uint8_t WriteCommandBytes[4]; - } Write_FuseLockSig_Params; - - Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params)); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++) - SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]); - - Endpoint_Write_Byte(V2Command); - Endpoint_Write_Byte(STATUS_CMD_OK); - Endpoint_Write_Byte(STATUS_CMD_OK); - Endpoint_ClearIN(); -} - -/** Handler for the CMD_SPI_MULTI command, writing and reading arbitrary SPI data to and from the attached device. */ -static void V2Protocol_ISP_SPIMulti(void) -{ - struct - { - uint8_t TxBytes; - uint8_t RxBytes; - uint8_t RxStartAddr; - uint8_t TxData[255]; - } SPI_Multi_Params; - - Endpoint_Read_Stream_LE(&SPI_Multi_Params, sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData)); - Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes); - - Endpoint_ClearOUT(); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - Endpoint_Write_Byte(CMD_SPI_MULTI); - Endpoint_Write_Byte(STATUS_CMD_OK); - - uint8_t CurrTxPos = 0; - uint8_t CurrRxPos = 0; - - /* Write out bytes to transmit until the start of the bytes to receive is met */ - while (CurrTxPos < SPI_Multi_Params.RxStartAddr) - { - if (CurrTxPos < SPI_Multi_Params.TxBytes) - SPI_SendByte(SPI_Multi_Params.TxData[CurrTxPos]); - else - SPI_SendByte(0); - - CurrTxPos++; - } - - /* Transmit remaining bytes with padding as needed, read in response bytes */ - while (CurrRxPos < SPI_Multi_Params.RxBytes) - { - if (CurrTxPos < SPI_Multi_Params.TxBytes) - Endpoint_Write_Byte(SPI_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++])); - else - Endpoint_Write_Byte(SPI_ReceiveByte()); - - CurrRxPos++; - } - - Endpoint_Write_Byte(STATUS_CMD_OK); - Endpoint_ClearIN(); -} diff --git a/Projects/AVRISP/Lib/V2Protocol.h b/Projects/AVRISP/Lib/V2Protocol.h index 63a2347a8..b31147846 100644 --- a/Projects/AVRISP/Lib/V2Protocol.h +++ b/Projects/AVRISP/Lib/V2Protocol.h @@ -43,24 +43,30 @@ #include "../Descriptors.h" #include "V2ProtocolConstants.h" #include "V2ProtocolParams.h" - #include "V2ProtocolTarget.h" + #include "ISPProtocol.h" /* Macros: */ /** Programmer ID string, returned to the host during the CMD_SIGN_ON command processing */ #define PROGRAMMER_ID "AVRISP_MK2" - - /** Mask for the reading or writing of the high byte in a FLASH word when issuing a low-level programming command */ - #define READ_WRITE_HIGH_BYTE_MASK (1 << 3) - #define PROG_MODE_PAGED_WRITES_MASK (1 << 0) - #define PROG_MODE_WORD_TIMEDELAY_MASK (1 << 1) - #define PROG_MODE_WORD_VALUE_MASK (1 << 2) - #define PROG_MODE_WORD_READYBUSY_MASK (1 << 3) - #define PROG_MODE_PAGED_TIMEDELAY_MASK (1 << 4) - #define PROG_MODE_PAGED_VALUE_MASK (1 << 5) - #define PROG_MODE_PAGED_READYBUSY_MASK (1 << 6) - #define PROG_MODE_COMMIT_PAGE_MASK (1 << 7) - + /** Timeout in milliseconds of target busy-wait loops waiting for a command to complete */ + #define TARGET_BUSY_TIMEOUT_MS 240 + + /* Inline Functions: */ + /** Blocking delay for a given number of milliseconds, via a hardware timer. + * + * \param[in] DelayMS Number of milliseconds to delay for + */ + static inline void V2Protocol_DelayMS(uint8_t DelayMS) + { + TCNT0 = 0; + while (TCNT0 < DelayMS); + } + + /* External Variables: */ + extern uint32_t CurrentAddress; + extern bool MustSetAddress; + /* Function Prototypes: */ void V2Protocol_ProcessCommand(void); @@ -70,14 +76,6 @@ static void V2Protocol_GetSetParam(uint8_t V2Command); static void V2Protocol_ResetProtection(void); static void V2Protocol_LoadAddress(void); - static void V2Protocol_ISP_EnterISPMode(void); - static void V2Protocol_ISP_LeaveISPMode(void); - static void V2Protocol_ISP_ProgramMemory(uint8_t V2Command); - static void V2Protocol_ISP_ReadMemory(uint8_t V2Command); - static void V2Protocol_ISP_ChipErase(void); - static void V2Protocol_ISP_ReadFuseLockSigOSCCAL(uint8_t V2Command); - static void V2Protocol_ISP_WriteFuseLock(uint8_t V2Command); - static void V2Protocol_ISP_SPIMulti(void); #endif #endif diff --git a/Projects/AVRISP/Lib/V2ProtocolConstants.h b/Projects/AVRISP/Lib/V2ProtocolConstants.h index dce660a73..5e6bd3638 100644 --- a/Projects/AVRISP/Lib/V2ProtocolConstants.h +++ b/Projects/AVRISP/Lib/V2ProtocolConstants.h @@ -59,6 +59,49 @@ #define CMD_READ_OSCCAL_ISP 0x1C #define CMD_SPI_MULTI 0x1D + #define CMD_XPROG 0x50 + #define CMD_XPROG_SETMODE 0x51 + + #define XPRG_CMD_ENTER_PROGMODE 0x01 + #define XPRG_CMD_LEAVE_PROGMODE 0x02 + #define XPRG_CMD_ERASE 0x03 + #define XPRG_CMD_WRITE_MEM 0x04 + #define XPRG_CMD_READ_MEM 0x05 + #define XPRG_CMD_CRC 0x06 + #define XPRG_CMD_SET_PARAM 0x07 + + #define XPRG_MEM_TYPE_APPL 1 + #define XPRG_MEM_TYPE_BOOT 2 + #define XPRG_MEM_TYPE_EEPROM 3 + #define XPRG_MEM_TYPE_FUSE 4 + #define XPRG_MEM_TYPE_LOCKBITS 5 + #define XPRG_MEM_TYPE_USERSIG 6 + #define XPRG_MEM_TYPE_FACTORY_CALIBRATION 7 + + #define XPRG_ERASE_CHIP 1 + #define XPRG_ERASE_APP 2 + #define XPRG_ERASE_BOOT 3 + #define XPRG_ERASE_EEPROM 4 + #define XPRG_ERASE_APP_PAGE 5 + #define XPRG_ERASE_BOOT_PAGE 6 + #define XPRG_ERASE_EEPROM_PAGE 7 + #define XPRG_ERASE_USERSIG 8 + + #define XPRG_MEM_WRITE_ERASE 0 + #define XPRG_MEM_WRITE_WRITE 1 + + #define XPRG_CRC_APP 1 + #define XPRG_CRC_BOOT 2 + #define XPRG_CRC_FLASH 3 + + #define XPRG_ERR_OK 0 + #define XPRG_ERR_FAILED 1 + #define XPRG_ERR_COLLISION 2 + #define XPRG_ERR_TIMEOUT 3 + + #define XPRG_PARAM_NVMBASE 0x01 + #define XPRG_PARAM_EEPPAGESIZE 0x02 + #define STATUS_CMD_OK 0x00 #define STATUS_CMD_TOUT 0x80 #define STATUS_RDY_BSY_TOUT 0x81 diff --git a/Projects/AVRISP/Lib/V2ProtocolParams.c b/Projects/AVRISP/Lib/V2ProtocolParams.c index 62149b4c3..f6b057fc9 100644 --- a/Projects/AVRISP/Lib/V2ProtocolParams.c +++ b/Projects/AVRISP/Lib/V2ProtocolParams.c @@ -67,7 +67,7 @@ static ParameterItem_t ParameterTable[] = .ParamPrivileges = PARAM_PRIV_READ }, { .ParamID = PARAM_SCK_DURATION, - .ParamValue = (TOTAL_PROGRAMMING_SPEEDS - 1), + .ParamValue = (TOTAL_ISP_PROGRAMMING_SPEEDS - 1), .ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE }, { .ParamID = PARAM_RESET_POLARITY, diff --git a/Projects/AVRISP/Lib/V2ProtocolParams.h b/Projects/AVRISP/Lib/V2ProtocolParams.h index b27a4ea94..6a5c25f1f 100644 --- a/Projects/AVRISP/Lib/V2ProtocolParams.h +++ b/Projects/AVRISP/Lib/V2ProtocolParams.h @@ -48,6 +48,7 @@ #include "V2Protocol.h" #include "V2ProtocolConstants.h" + #include "V2ProtocolTarget.h" /* Macros: */ /** Parameter privilege mask to allow the host PC to read the parameter's value */ diff --git a/Projects/AVRISP/Lib/V2ProtocolTarget.c b/Projects/AVRISP/Lib/V2ProtocolTarget.c index 80e8be1e8..b5de9ba4f 100644 --- a/Projects/AVRISP/Lib/V2ProtocolTarget.c +++ b/Projects/AVRISP/Lib/V2ProtocolTarget.c @@ -30,20 +30,17 @@ /** \file * - * Target-related functions for the V2 Protocol decoder. + * Target-related functions for the ISP Protocol decoder. */ #include "V2ProtocolTarget.h" -/** Current memory address for FLASH/EEPROM memory read/write commands */ -uint32_t CurrentAddress; - /** Converts the given AVR Studio SCK duration parameter (set by a SET PARAM command from the host) to the nearest * possible SPI clock prescaler mask for passing to the SPI_Init() routine. * * \return Nearest SPI prescaler mask for the given SCK frequency */ -uint8_t V2Protocol_GetSPIPrescalerMask(void) +uint8_t ISPTarget_GetSPIPrescalerMask(void) { static const uint8_t SPIMaskFromSCKDuration[] = { @@ -81,7 +78,7 @@ uint8_t V2Protocol_GetSPIPrescalerMask(void) * * \param[in] ResetTarget Boolean true when the target should be held in reset, false otherwise */ -void V2Protocol_ChangeTargetResetLine(bool ResetTarget) +void ISPTarget_ChangeTargetResetLine(bool ResetTarget) { if (ResetTarget) { @@ -109,8 +106,8 @@ void V2Protocol_ChangeTargetResetLine(bool ResetTarget) * \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT or * \ref STATUS_CMD_TOUT otherwise */ -uint8_t V2Protocol_WaitForProgComplete(uint8_t ProgrammingMode, uint16_t PollAddress, uint8_t PollValue, - uint8_t DelayMS, uint8_t ReadMemCommand) +uint8_t ISPTarget_WaitForProgComplete(uint8_t ProgrammingMode, uint16_t PollAddress, uint8_t PollValue, + uint8_t DelayMS, uint8_t ReadMemCommand) { uint8_t ProgrammingStatus = STATUS_CMD_OK; @@ -139,7 +136,7 @@ uint8_t V2Protocol_WaitForProgComplete(uint8_t ProgrammingMode, uint16_t PollAdd break; case PROG_MODE_WORD_READYBUSY_MASK: case PROG_MODE_PAGED_READYBUSY_MASK: - ProgrammingStatus = V2Protocol_WaitWhileTargetBusy(); + ProgrammingStatus = ISPTarget_WaitWhileTargetBusy(); break; } @@ -151,7 +148,7 @@ uint8_t V2Protocol_WaitForProgComplete(uint8_t ProgrammingMode, uint16_t PollAdd * * \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT otherwise */ -uint8_t V2Protocol_WaitWhileTargetBusy(void) +uint8_t ISPTarget_WaitWhileTargetBusy(void) { TCNT0 = 0; @@ -174,7 +171,7 @@ uint8_t V2Protocol_WaitWhileTargetBusy(void) * 64KB boundary. This sends the command with the correct address as indicated by the current address * pointer variable set by the host when a SET ADDRESS command is issued. */ -void V2Protocol_LoadExtendedAddress(void) +void ISPTarget_LoadExtendedAddress(void) { SPI_SendByte(0x4D); SPI_SendByte(0x00); diff --git a/Projects/AVRISP/Lib/V2ProtocolTarget.h b/Projects/AVRISP/Lib/V2ProtocolTarget.h index 0de7b39cc..121d7893f 100644 --- a/Projects/AVRISP/Lib/V2ProtocolTarget.h +++ b/Projects/AVRISP/Lib/V2ProtocolTarget.h @@ -30,11 +30,11 @@ /** \file * - * Header file for V2ProtocolTarget.c. + * Header file for ISPTarget.c. */ -#ifndef _V2_PROTOCOL_TARGET_ -#define _V2_PROTOCOL_TARGET_ +#ifndef _ISP_TARGET_ +#define _ISP_TARGET_ /* Includes: */ #include @@ -49,32 +49,14 @@ /* Macros: */ /** Total number of allowable ISP programming speeds supported by the device */ - #define TOTAL_PROGRAMMING_SPEEDS 7 - - /** Timeout in milliseconds of target busy-wait loops waiting for a command to complete */ - #define TARGET_BUSY_TIMEOUT_MS 240 - - /* External Variables: */ - extern uint32_t CurrentAddress; - - /* Inline Functions: */ - /** Blocking delay for a given number of milliseconds, via a hardware timer. - * - * \param[in] DelayMS Number of milliseconds to delay for - */ - static inline void V2Protocol_DelayMS(uint8_t DelayMS) - { - TCNT0 = 0; - while (TCNT0 < DelayMS); - } + #define TOTAL_ISP_PROGRAMMING_SPEEDS 7 /* Function Prototypes: */ - uint8_t V2Protocol_GetSPIPrescalerMask(void); - void V2Protocol_ChangeTargetResetLine(bool ResetTarget); - void V2Protocol_DelayMS(uint8_t MS); - uint8_t V2Protocol_WaitForProgComplete(uint8_t ProgrammingMode, uint16_t PollAddress, uint8_t PollValue, + uint8_t ISPTarget_GetSPIPrescalerMask(void); + void ISPTarget_ChangeTargetResetLine(bool ResetTarget); + uint8_t ISPTarget_WaitForProgComplete(uint8_t ProgrammingMode, uint16_t PollAddress, uint8_t PollValue, uint8_t DelayMS, uint8_t ReadMemCommand); - uint8_t V2Protocol_WaitWhileTargetBusy(void); - void V2Protocol_LoadExtendedAddress(void); + uint8_t ISPTarget_WaitWhileTargetBusy(void); + void ISPTarget_LoadExtendedAddress(void); #endif diff --git a/Projects/AVRISP/makefile b/Projects/AVRISP/makefile index e89c5e86b..bc63e951f 100644 --- a/Projects/AVRISP/makefile +++ b/Projects/AVRISP/makefile @@ -130,6 +130,7 @@ SRC = $(TARGET).c \ Lib/V2Protocol.c \ Lib/V2ProtocolParams.c \ Lib/V2ProtocolTarget.c \ + Lib/ISPProtocol.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \ -- cgit v1.2.3