From e11fddfe66fcd6fa5b783bb5f1c39dfb5687538d Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Tue, 23 Feb 2010 03:51:17 +0000 Subject: Update Temperature board driver to be AVR32 compatible when the ADC peripheral driver is eventually ported. Make architecture includes explicit for both the AVR32 and the AVR8, to make way for future architecture ports. Add SPI driver aliases for the old function names in the AVR8 driver, so that existing code will still compile against the new version. --- Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c | 48 +++++++++++++++--------------- Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c | 24 +++++++-------- 2 files changed, 36 insertions(+), 36 deletions(-) (limited to 'Projects/AVRISP-MKII/Lib/ISP') diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c index 85b31fbdb..9922c195e 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c @@ -85,7 +85,7 @@ void ISPProtocol_EnterISPMode(void) for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) { ISPProtocol_DelayMS(Enter_ISP_Params.ByteDelay); - ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]); + ResponseBytes[RByte] = SPI_Transfer(Enter_ISP_Params.EnterProgBytes[RByte]); } /* Check if polling disabled, or if the polled value matches the expected value */ @@ -204,10 +204,10 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) bool IsOddByte = (CurrentByte & 0x01); uint8_t ByteToWrite = *(NextWriteByte++); - SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); - SPI_SendByte(CurrentAddress >> 8); - SPI_SendByte(CurrentAddress & 0xFF); - SPI_SendByte(ByteToWrite); + SPI_Send(Write_Memory_Params.ProgrammingCommands[0]); + SPI_Send(CurrentAddress >> 8); + SPI_Send(CurrentAddress & 0xFF); + SPI_Send(ByteToWrite); /* AVR FLASH addressing requires us to modify the write command based on if we are writing a high * or low byte at the current word address */ @@ -230,10 +230,10 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) /* If the current page must be committed, send the PROGRAM PAGE command to the target */ if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK) { - SPI_SendByte(Write_Memory_Params.ProgrammingCommands[1]); - SPI_SendByte(StartAddress >> 8); - SPI_SendByte(StartAddress & 0xFF); - SPI_SendByte(0x00); + SPI_Send(Write_Memory_Params.ProgrammingCommands[1]); + SPI_Send(StartAddress >> 8); + SPI_Send(StartAddress & 0xFF); + SPI_Send(0x00); /* Check if polling is possible, if not switch to timed delay mode */ if (!(PollAddress)) @@ -254,10 +254,10 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) bool IsOddByte = (CurrentByte & 0x01); uint8_t ByteToWrite = *(NextWriteByte++); - SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]); - SPI_SendByte(CurrentAddress >> 8); - SPI_SendByte(CurrentAddress & 0xFF); - SPI_SendByte(ByteToWrite); + SPI_Send(Write_Memory_Params.ProgrammingCommands[0]); + SPI_Send(CurrentAddress >> 8); + SPI_Send(CurrentAddress & 0xFF); + SPI_Send(ByteToWrite); /* AVR FLASH addressing requires us to modify the write command based on if we are writing a high * or low byte at the current word address */ @@ -325,10 +325,10 @@ void ISPProtocol_ReadMemory(uint8_t V2Command) for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++) { /* Read the next byte from the desired memory space in the device */ - SPI_SendByte(Read_Memory_Params.ReadMemoryCommand); - SPI_SendByte(CurrentAddress >> 8); - SPI_SendByte(CurrentAddress & 0xFF); - Endpoint_Write_Byte(SPI_ReceiveByte()); + SPI_Send(Read_Memory_Params.ReadMemoryCommand); + SPI_Send(CurrentAddress >> 8); + SPI_Send(CurrentAddress & 0xFF); + Endpoint_Write_Byte(SPI_Receive()); /* Check if the endpoint bank is currently full, if so send the packet */ if (!(Endpoint_IsReadWriteAllowed())) @@ -381,7 +381,7 @@ void ISPProtocol_ChipErase(void) /* Send the chip erase commands as given by the host to the device */ for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++) - SPI_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]); + SPI_Send(Erase_Chip_Params.EraseCommandBytes[SByte]); /* Use appropriate command completion check as given by the host (delay or busy polling) */ if (!(Erase_Chip_Params.PollMethod)) @@ -416,7 +416,7 @@ void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command) /* Send the Fuse or Lock byte read commands as given by the host to the device, store response */ for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++) - ResponseBytes[RByte] = SPI_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]); + ResponseBytes[RByte] = SPI_Transfer(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]); Endpoint_Write_Byte(V2Command); Endpoint_Write_Byte(STATUS_CMD_OK); @@ -444,7 +444,7 @@ void ISPProtocol_WriteFuseLock(uint8_t V2Command) /* Send the Fuse or Lock byte program commands as given by the host to the device */ for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++) - SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]); + SPI_Send(Write_FuseLockSig_Params.WriteCommandBytes[SByte]); Endpoint_Write_Byte(V2Command); Endpoint_Write_Byte(STATUS_CMD_OK); @@ -479,9 +479,9 @@ void ISPProtocol_SPIMulti(void) while (CurrTxPos < SPI_Multi_Params.RxStartAddr) { if (CurrTxPos < SPI_Multi_Params.TxBytes) - SPI_SendByte(SPI_Multi_Params.TxData[CurrTxPos]); + SPI_Send(SPI_Multi_Params.TxData[CurrTxPos]); else - SPI_SendByte(0); + SPI_Send(0); CurrTxPos++; } @@ -490,9 +490,9 @@ void ISPProtocol_SPIMulti(void) while (CurrRxPos < SPI_Multi_Params.RxBytes) { if (CurrTxPos < SPI_Multi_Params.TxBytes) - Endpoint_Write_Byte(SPI_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++])); + Endpoint_Write_Byte(SPI_Transfer(SPI_Multi_Params.TxData[CurrTxPos++])); else - Endpoint_Write_Byte(SPI_ReceiveByte()); + Endpoint_Write_Byte(SPI_Receive()); /* Check to see if we have filled the endpoint bank and need to send the packet */ if (!(Endpoint_IsReadWriteAllowed())) diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c index 94f1c3d74..b657758e9 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c @@ -131,11 +131,11 @@ uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode, const uint1 TimeoutMSRemaining--; } - SPI_SendByte(ReadMemCommand); - SPI_SendByte(PollAddress >> 8); - SPI_SendByte(PollAddress & 0xFF); + SPI_Send(ReadMemCommand); + SPI_Send(PollAddress >> 8); + SPI_Send(PollAddress & 0xFF); } - while ((SPI_TransferByte(0x00) == PollValue) && TimeoutMSRemaining); + while ((SPI_Transfer(0x00) == PollValue) && TimeoutMSRemaining); if (!(TimeoutMSRemaining)) ProgrammingStatus = STATUS_CMD_TOUT; @@ -169,11 +169,11 @@ uint8_t ISPTarget_WaitWhileTargetBusy(void) TimeoutMSRemaining--; } - SPI_SendByte(0xF0); - SPI_SendByte(0x00); - SPI_SendByte(0x00); + SPI_Send(0xF0); + SPI_Send(0x00); + SPI_Send(0x00); } - while ((SPI_ReceiveByte() & 0x01) && TimeoutMSRemaining); + while ((SPI_Receive() & 0x01) && TimeoutMSRemaining); if (TimeoutMSRemaining) { @@ -192,10 +192,10 @@ uint8_t ISPTarget_WaitWhileTargetBusy(void) */ void ISPTarget_LoadExtendedAddress(void) { - SPI_SendByte(LOAD_EXTENDED_ADDRESS_CMD); - SPI_SendByte(0x00); - SPI_SendByte((CurrentAddress & 0x00FF0000) >> 16); - SPI_SendByte(0x00); + SPI_Send(LOAD_EXTENDED_ADDRESS_CMD); + SPI_Send(0x00); + SPI_Send((CurrentAddress & 0x00FF0000) >> 16); + SPI_Send(0x00); } #endif -- cgit v1.2.3