From 926a83bbc12cc09e026a51b173007dc7cda16117 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 10 May 2012 20:11:47 +0000 Subject: AppConfigHeaders: Update several user projects to use configuration header files, rather than makefile defines. --- Projects/AVRISP-MKII/AVRISP-MKII.txt | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'Projects/AVRISP-MKII/AVRISP-MKII.txt') diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt index ad58dab1f..a933f386a 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.txt +++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt @@ -214,60 +214,60 @@ * * * AUX_LINE_PORT - * Makefile LUFA_OPTS + * AppConfig.h * PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n Ignored when compiled for the XPLAIN board. * * * AUX_LINE_PIN - * Makefile LUFA_OPTS + * AppConfig.h * PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n Ignored when compiled for the XPLAIN board. * * * AUX_LINE_DDR - * Makefile LUFA_OPTS + * AppConfig.h * DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n Ignored when compiled for the XPLAIN board. * * * AUX_LINE_MASK - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. Must not be the AVR's /SS pin. * \n \n Ignored when compiled for the XPLAIN board. * * * VTARGET_ADC_CHANNEL - * Makefile LUFA_OPTS + * AppConfig.h * ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined. * \n \n Ignored when compiled for targets lacking an ADC. * * * ENABLE_ISP_PROTOCOL - * Makefile LUFA_OPTS + * AppConfig.h * Define to enable SPI programming protocol support. * \n \n Ignored when compiled for the XPLAIN board. * * * ENABLE_XPROG_PROTOCOL - * Makefile LUFA_OPTS + * AppConfig.h * Define to enable PDI and TPI programming protocol support. * \n \n Ignored when compiled for the XPLAIN board. * * * NO_VTARGET_DETECT - * Makefile LUFA_OPTS + * AppConfig.h * Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer * to report a fixed 3.3V target voltage to the host regardless of the real target voltage. * \n \n Ignored when compiled for targets lacking an ADC. * * * VTARGET_REF_VOLTS - * Makefile LUFA_OPTS + * AppConfig.h * Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply * voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage * to the ADC. @@ -275,14 +275,14 @@ * * * VTARGET_USE_INTERNAL_REF - * Makefile LUFA_OPTS + * AppConfig.h * Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will * override the VTARGET_REF_VOLTS configuration option. * \n \n Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined. * * * VTARGET_SCALE_FACTOR - * Makefile LUFA_OPTS + * AppConfig.h * Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the * ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be * measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set @@ -291,25 +291,25 @@ * * * LIBUSB_DRIVER_COMPAT - * Makefile LUFA_OPTS + * AppConfig.h * Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making * the code compatible with software such as avrdude (all platforms) that use the libUSB driver. * * * XCK_RESCUE_CLOCK_ENABLE - * Makefile LUFA_OPTS + * AppConfig.h * Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming * hardware that does not expose the OCR1A pin of the AVR, but may cause some issues with PDI programming mode. * * * INVERTED_ISP_MISO - * Makefile LUFA_OPTS + * AppConfig.h * Define to invert the received data on the ISP MISO line. This is sometimes needed depending on the level translation hardware used, * if the translator hardware inverts the received logic level. * * * FIRMWARE_VERSION_MINOR - * Makefile LUFA_OPTS + * AppConfig.h * Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here. * -- cgit v1.2.3