From c5038f1bf44aea75f1ae1ed035cb7d523ccfdacb Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 5 Aug 2009 06:36:31 +0000 Subject: Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only. Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events. Fixed incorrect Host state assignment in the incomplete BluetoothHost demo. --- LUFA/Drivers/USB/LowLevel/LowLevel.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'LUFA/Drivers/USB/LowLevel/LowLevel.h') diff --git a/LUFA/Drivers/USB/LowLevel/LowLevel.h b/LUFA/Drivers/USB/LowLevel/LowLevel.h index 1ca54ed9d..b8f7b9de1 100644 --- a/LUFA/Drivers/USB/LowLevel/LowLevel.h +++ b/LUFA/Drivers/USB/LowLevel/LowLevel.h @@ -191,7 +191,7 @@ #endif /** Detaches the device from the USB bus. This has the effect of removing the device from any - * host if, ceasing USB communications. If no host is present, this prevents any host from + * attached host, ceasing USB communications. If no host is present, this prevents any host from * enumerating the device once attached until \ref USB_Attach() is called. */ #define USB_Detach() MACROS{ UDCON |= (1 << DETACH); }MACROE @@ -342,7 +342,7 @@ #define USB_Controller_Enable() MACROS{ USBCON |= (1 << USBE); }MACROE #define USB_Controller_Disable() MACROS{ USBCON &= ~(1 << USBE); }MACROE - #define USB_Controller_Reset() MACROS{ uint8_t Temp = USBCON; USBCON = (Temp & ~(1 << USBE)); \ + #define USB_Controller_Reset() MACROS{ const uint8_t Temp = USBCON; USBCON = (Temp & ~(1 << USBE)); \ USBCON = (Temp | (1 << USBE)); }MACROE /* Inline Functions: */ -- cgit v1.2.3