From 64e5c4084f862267d96b0947f462de7058f3dc4c Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sat, 7 Nov 2009 03:51:24 +0000 Subject: Add optional pipe double banking support to the Host mode Class drivers. Descriptor processing routines now pass around void pointers rather than uint8_t pointers, as their destination datatype is know well known -- they are just streams of bytes until they are cast to the correct destination type by DESCRIPTOR_CAST. --- LUFA/Drivers/USB/Class/Host/StillImage.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'LUFA/Drivers/USB/Class/Host/StillImage.c') diff --git a/LUFA/Drivers/USB/Class/Host/StillImage.c b/LUFA/Drivers/USB/Class/Host/StillImage.c index f98f508b2..e809c92dd 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImage.c +++ b/LUFA/Drivers/USB/Class/Host/StillImage.c @@ -35,7 +35,7 @@ #include "StillImage.h" uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, uint16_t ConfigDescriptorSize, - uint8_t* DeviceConfigDescriptor) + void* DeviceConfigDescriptor) { uint8_t FoundEndpoints = 0; @@ -66,7 +66,7 @@ uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, u { Pipe_ConfigurePipe(SIInterfaceInfo->Config.EventsPipeNumber, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, EndpointData->EndpointAddress, EndpointData->EndpointSize, - PIPE_BANK_DOUBLE); + SIInterfaceInfo->Config.EventsPipeDoubleBank ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE); SIInterfaceInfo->State.EventsPipeSize = EndpointData->EndpointSize; Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS); @@ -80,7 +80,7 @@ uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, u { Pipe_ConfigurePipe(SIInterfaceInfo->Config.DataINPipeNumber, EP_TYPE_BULK, PIPE_TOKEN_IN, EndpointData->EndpointAddress, EndpointData->EndpointSize, - PIPE_BANK_DOUBLE); + SIInterfaceInfo->Config.DataINPipeDoubleBank ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE); SIInterfaceInfo->State.DataINPipeSize = EndpointData->EndpointSize; FoundEndpoints |= SI_FOUND_DATAPIPE_IN; @@ -89,7 +89,7 @@ uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, u { Pipe_ConfigurePipe(SIInterfaceInfo->Config.DataOUTPipeNumber, EP_TYPE_BULK, PIPE_TOKEN_OUT, EndpointData->EndpointAddress, EndpointData->EndpointSize, - PIPE_BANK_DOUBLE); + SIInterfaceInfo->Config.DataOUTPipeDoubleBank ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE); SIInterfaceInfo->State.DataOUTPipeSize = EndpointData->EndpointSize; FoundEndpoints |= SI_FOUND_DATAPIPE_OUT; -- cgit v1.2.3