From 6abb74f6b791acb04c9d149d1703213162d4126d Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Mon, 29 Jul 2019 21:30:06 +1000 Subject: Bootloaders: Enable LTO to reduce compiled size. --- Bootloaders/CDC/makefile | 1 + Bootloaders/DFU/makefile | 1 + Bootloaders/HID/makefile | 1 + Bootloaders/MassStorage/makefile | 1 + Bootloaders/Printer/makefile | 1 + 5 files changed, 5 insertions(+) (limited to 'Bootloaders') diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index c618e9cca..98fa4300f 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -22,6 +22,7 @@ SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $( LUFA_PATH = ../../LUFA CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) +LTO = Y # Flash size and bootloader section sizes of the target, in KB. These must # match the target's total FLASH size and the bootloader size set in the diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index dc54ba954..2859aa0b1 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -22,6 +22,7 @@ SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $( LUFA_PATH = ../../LUFA CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) +LTO = Y # Flash size and bootloader section sizes of the target, in KB. These must # match the target's total FLASH size and the bootloader size set in the diff --git a/Bootloaders/HID/makefile b/Bootloaders/HID/makefile index 238823fe3..cd1b8b3b5 100644 --- a/Bootloaders/HID/makefile +++ b/Bootloaders/HID/makefile @@ -22,6 +22,7 @@ SRC = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) LUFA_PATH = ../../LUFA CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -DBOOT_START_ADDR=$(BOOT_START_OFFSET) -IConfig/ LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) +LTO = Y # Flash size and bootloader section sizes of the target, in KB. These must # match the target's total FLASH size and the bootloader size set in the diff --git a/Bootloaders/MassStorage/makefile b/Bootloaders/MassStorage/makefile index 2df26669b..a5ce0a16c 100644 --- a/Bootloaders/MassStorage/makefile +++ b/Bootloaders/MassStorage/makefile @@ -22,6 +22,7 @@ SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Li LUFA_PATH = ../../LUFA CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) +LTO = Y # Flash size and bootloader section sizes of the target, in KB. These must # match the target's total FLASH size and the bootloader size set in the diff --git a/Bootloaders/Printer/makefile b/Bootloaders/Printer/makefile index 744ba2a33..1b0caeb15 100644 --- a/Bootloaders/Printer/makefile +++ b/Bootloaders/Printer/makefile @@ -22,6 +22,7 @@ SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $( LUFA_PATH = ../../LUFA CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) +LTO = Y # Flash size and bootloader section sizes of the target, in KB. These must # match the target's total FLASH size and the bootloader size set in the -- cgit v1.2.3 From 5ada54b43299564d5fa52d62abfa9648a4b6c207 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Mon, 29 Jul 2019 22:30:46 +1000 Subject: Bootloader: MassStorage: Enlarge AUX section to 8KB to fit with newer GCC versions. --- Bootloaders/MassStorage/makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Bootloaders') diff --git a/Bootloaders/MassStorage/makefile b/Bootloaders/MassStorage/makefile index a5ce0a16c..4a6e18e22 100644 --- a/Bootloaders/MassStorage/makefile +++ b/Bootloaders/MassStorage/makefile @@ -44,12 +44,12 @@ BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, Boot BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8) # Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the -# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum +# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 8KB but the maximum # bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices. ifeq ($(BOOT_SECTION_SIZE_KB),8) CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0 else - AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB)) + AUX_BOOT_SECTION_SIZE_KB = (8 - $(BOOT_SECTION_SIZE_KB)) CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)' LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16)) -- cgit v1.2.3 From 1695f8cc631d0fedd81b3ae6a8c1f02680154454 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 4 Sep 2019 22:22:34 +1000 Subject: Documentation: Fix Doxygen grouping. --- Bootloaders/MassStorage/Lib/VirtualFAT.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Bootloaders') diff --git a/Bootloaders/MassStorage/Lib/VirtualFAT.h b/Bootloaders/MassStorage/Lib/VirtualFAT.h index 07abb9eb2..2ecad9b88 100644 --- a/Bootloaders/MassStorage/Lib/VirtualFAT.h +++ b/Bootloaders/MassStorage/Lib/VirtualFAT.h @@ -126,7 +126,7 @@ (uint8_t)(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(n0)+n1)+n2)+n3)+n4)+n5)+n6)+n7)+e0)+e1)+e2) /** \name FAT Filesystem Flags */ - //@{ + /**@{*/ /** FAT attribute flag to indicate a read-only file. */ #define FAT_FLAG_READONLY (1 << 0) @@ -150,7 +150,7 @@ /** Ordinal flag marker for FAT Long File Name entries to mark the last entry. */ #define FAT_ORDINAL_LAST_ENTRY (1 << 6) - //@} + /**@}*/ /* Enums: */ /** Enum for the Root FAT file entry indexes on the disk. This can be used -- cgit v1.2.3 From 6d9077370b613e9bf26d5d5e03481258873efa02 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 4 Sep 2019 22:24:16 +1000 Subject: Documentation: Update doxygen config files to latest released version. --- Bootloaders/CDC/doxyfile | 300 ++++++++++++++++++++++++++++----------- Bootloaders/DFU/doxyfile | 300 ++++++++++++++++++++++++++++----------- Bootloaders/HID/doxyfile | 300 ++++++++++++++++++++++++++++----------- Bootloaders/MassStorage/doxyfile | 300 ++++++++++++++++++++++++++++----------- Bootloaders/Printer/doxyfile | 300 ++++++++++++++++++++++++++++----------- 5 files changed, 1080 insertions(+), 420 deletions(-) (limited to 'Bootloaders') diff --git a/Bootloaders/CDC/doxyfile b/Bootloaders/CDC/doxyfile index 414693479..9272c7b60 100644 --- a/Bootloaders/CDC/doxyfile +++ b/Bootloaders/CDC/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2081,12 +2217,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2100,15 +2230,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2241,7 +2362,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2252,7 +2374,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2275,11 +2398,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2330,6 +2457,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Bootloaders/DFU/doxyfile b/Bootloaders/DFU/doxyfile index cbb03d6fa..f4e9f61fe 100644 --- a/Bootloaders/DFU/doxyfile +++ b/Bootloaders/DFU/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2081,12 +2217,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2100,15 +2230,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2241,7 +2362,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2252,7 +2374,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2275,11 +2398,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2330,6 +2457,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Bootloaders/HID/doxyfile b/Bootloaders/HID/doxyfile index 4c3de5ab9..8fe818da2 100644 --- a/Bootloaders/HID/doxyfile +++ b/Bootloaders/HID/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -877,6 +943,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -886,6 +956,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -938,7 +1012,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -970,12 +1044,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1003,7 +1077,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1016,6 +1090,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1134,7 +1218,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1163,12 +1247,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1192,13 +1288,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1237,7 +1333,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1313,7 +1409,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1321,7 +1417,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1330,7 +1426,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1338,7 +1434,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1346,7 +1442,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1439,7 +1535,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1451,7 +1547,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1478,8 +1574,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1540,7 +1636,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1553,7 +1649,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1605,21 +1701,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1638,9 +1748,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1737,12 +1850,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1782,9 +1911,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1793,8 +1922,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1880,6 +2009,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1912,9 +2048,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2083,12 +2219,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2102,15 +2232,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2243,7 +2364,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2254,7 +2376,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2277,11 +2400,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2332,6 +2459,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Bootloaders/MassStorage/doxyfile b/Bootloaders/MassStorage/doxyfile index 795c6e81a..4b80d7005 100644 --- a/Bootloaders/MassStorage/doxyfile +++ b/Bootloaders/MassStorage/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2081,12 +2217,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2100,15 +2230,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2241,7 +2362,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2252,7 +2374,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2275,11 +2398,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2330,6 +2457,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Bootloaders/Printer/doxyfile b/Bootloaders/Printer/doxyfile index 0f96bb9b7..5e4a0b2e9 100644 --- a/Bootloaders/Printer/doxyfile +++ b/Bootloaders/Printer/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2081,12 +2217,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2100,15 +2230,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2241,7 +2362,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2252,7 +2374,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2275,11 +2398,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2330,6 +2457,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. -- cgit v1.2.3