aboutsummaryrefslogtreecommitdiffstats
path: root/Projects/AVRISP-MKII
Commit message (Collapse)AuthorAgeFilesLines
* Revert change to the AVRISP-MKII project for fuse byte programming via the ↵Dean Camera2010-10-021-9/+0
| | | | CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
* Fixed broken lock byte programming in the AVRISP-MKII clone project for some ↵Dean Camera2010-10-022-3/+10
| | | | XMEGA targets.
* Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when ↵Dean Camera2010-10-022-4/+15
| | | | writing in non-paged mode and the polling byte cannot be used.
* Changed default value for the reset polarity parameter in the AVRISP-MKII ↵Dean Camera2010-09-292-2/+4
| | | | | | project so that it defaults to active low drive. Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
* Remove dfu-programmer program switches, to ensure maximum compatibility with ↵Dean Camera2010-09-241-2/+2
| | | | all dfu-programmer versions.
* Added the --suppress-bootloader-mem option to the makefile dfu target, to ↵Dean Camera2010-09-241-3/+3
| | | | | | | | ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde). Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target. Makefile whitespace fixes.
* Make project makefiles correctly clean intermeditary build files from ↵Dean Camera2010-09-151-2/+2
| | | | assembly and C++ sources (thanks to Daniel Czigany).
* Fix typos in the project overview text files.Dean Camera2010-09-091-1/+1
|
* Clarify in the project documentation files what the each of the different ↵Dean Camera2010-08-311-4/+4
| | | | USB AVR device "series" comprises of.
* Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix ↵Dean Camera2010-08-311-1/+1
| | | | incorrect call to ADC_Init() in the TemperatureDatalogger project.
* Changed the signature of the CALLBACK_USB_GetDescriptor() callback function ↵Dean Camera2010-08-242-10/+11
| | | | so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
* Added compile time error to the AVRISP-MKII project when built for the U4 ↵Dean Camera2010-08-221-0/+4
| | | | chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).
* Removed complicated logic for the Endpoint_ConfigureEndpoint() function to ↵Dean Camera2010-08-091-15/+9
| | | | | | use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code. Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
* Commit for the 100807 release.Dean Camera2010-08-091-1/+1
|
* Fix invocations of avr-size in all makefiles broken on unpatched *nix ↵Dean Camera2010-08-081-1/+4
| | | | systems, due to the recent update to the latest WinAVR makefile template.
* Hide the PROGMEM attribute from Doxygen, as it appears to confuse the parser ↵Dean Camera2010-08-022-3/+10
| | | | in some situations.
* Invert the logic for the VBUS power light in the AVRISP-MKII project for the ↵Dean Camera2010-08-011-1/+1
| | | | USBTINY-MKII board target.
* More spell checking of all source files -- correct missed errors, switch to ↵Dean Camera2010-07-303-3/+3
| | | | EN-GB spelling dictionary.
* Spell check all source files once again to find any typos.Dean Camera2010-07-291-2/+2
|
* Add special support to the AVRISP-MKII for the new model USBTINY-MKII's ↵Dean Camera2010-07-292-6/+14
| | | | | | | | additional LED to indicate target power source. Add support to the USBTINY-MKII's additional LED in the board's LED driver header. Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED.
* Remove obsolete macros and preprocessor checks from the AVRISP-MKII ↵Dean Camera2010-07-291-29/+16
| | | | project's V2Protocol command handler header file.
* Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz ↵Dean Camera2010-07-296-86/+254
| | | | | | via a new software SPI driver. Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
* Future proof the XPROG protocol of the AVRISP-MKII project, so that non PDI ↵Dean Camera2010-07-221-2/+2
| | | | and TPI requests return failure.
* Update all demos, projects and bootloaders to indent all function ↵Dean Camera2010-07-218-15/+35
| | | | | | parameters, one per line, for better readability. Add missing const qualifiers to the demos.
* Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.Dean Camera2010-07-192-81/+64
| | | | Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
* Change over all makefiles to use C99 standards mode, rather than C99 + GNU ↵Dean Camera2010-07-181-1/+1
| | | | Extensions.
* Disable strict aliasing explicitly in the project makefiles, as this is ↵Dean Camera2010-07-151-0/+1
| | | | apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
* Removed the automated checking of event names in the demo, project and ↵Dean Camera2010-07-151-18/+6
| | | | | | bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform. Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
* Change AVRISP-MKII and XPLAINBridge descriptors to indicate that the device ↵Dean Camera2010-07-133-3/+6
| | | | is bus-powered only. Add compile time options to reduce the compiled size of the firmware.
* Remove the timeout period extension code from the AVRISP project, as no ↵Dean Camera2010-07-138-74/+31
| | | | single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
* Rename the AVRISP main source files to AVRISP-MKII so that it matches the ↵Dean Camera2010-07-135-2/+3
| | | | project name. Add AVRStudio project file for the AVRISP-MKII project.
* Add missing clean_doxygen phony targets to the project makefiles.Dean Camera2010-07-121-1/+2
|
* Move out Bluetooth stack callback functions to a seperate ↵Dean Camera2010-07-081-4/+4
| | | | BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.
* Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific ↵Dean Camera2010-07-022-1/+2
| | | | | | functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request. Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
* Add default "all" makefile targets to the demo tree makefiles.Dean Camera2010-06-251-1/+1
|
* Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather ↵Dean Camera2010-06-253-14/+4
| | | | than looping on the timeout value, as this is already checked inside the loop anyway.
* Moved calls to V2Params_UpdateParamValues() out of the main AVRISP-MKII and ↵Dean Camera2010-06-213-6/+5
| | | | XPLAINBridge project loops and into the AVRISP management function.
* Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project.Dean Camera2010-06-172-14/+63
|
* Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as ↵Dean Camera2010-06-162-4/+4
| | | | the new 1.7 Doxygen's default stylesheet is much better.
* Change over Doxygen \note documentation to \pre where applicable.Dean Camera2010-06-151-1/+1
|
* Minor documentation cleanups.Dean Camera2010-06-035-10/+11
|
* Add start of RFCOMM service layer to the incomplete BluetoothHost demo.Dean Camera2010-06-031-2/+2
| | | | Reduce the size of the attribute search list from 15 ranges to 8 to save RAM.
* Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to ↵Dean Camera2010-05-274-2/+18
| | | | | | the AVRISP-MKII programmer project to set the VTARGET reference voltage and scale factor. Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host.
* The EEPROM stream read/write functions now use eeprom_update_byte() instead ↵Dean Camera2010-05-261-3/+11
| | | | | | of eeprom_write_byte(), so that only changed bytes are written to EEPROM to preserve its lifespan. Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile parameters to EEPROM to preserve its lifespan.
* The RingBuff library code has been replaced in the XPLAINBridge project with ↵Dean Camera2010-05-261-2/+2
| | | | an ultra lightweight buffer to help improve the reliability of the bridge.
* Remove obsolete entry from the Doxygen configuration files.Dean Camera2010-05-231-1/+1
|
* Short UUIDs are measured in bytes, not bits -- update Service Discovery ↵Dean Camera2010-05-201-4/+6
| | | | Protocol code so that it can now correctly match against UUIDs in the service table.
* Begin processing code for Service Discovery Protocol attributes.Dean Camera2010-05-171-0/+1
|
* Fixed AVRISP project not sending a full erase-and-write EEPROM command to ↵Dean Camera2010-05-161-1/+1
| | | | XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
* Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs ↵Dean Camera2010-05-144-44/+39
| | | | after programming or reading from the last page of FLASH.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 20:57:20 +0000