aboutsummaryrefslogtreecommitdiffstats
path: root/LUFA/ManPages/ChangeLog.txt
Commit message (Collapse)AuthorAgeFilesLines
* The EEPROM stream read/write functions now use eeprom_update_byte() instead ↵Dean Camera2010-05-261-0/+4
| | | | | | of eeprom_write_byte(), so that only changed bytes are written to EEPROM to preserve its lifespan. Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile parameters to EEPROM to preserve its lifespan.
* The RingBuff library code has been replaced in the XPLAINBridge project with ↵Dean Camera2010-05-261-1/+2
| | | | an ultra lightweight buffer to help improve the reliability of the bridge.
* Fixed RNDISEthernet demos crashing when calculating checksums for ↵Dean Camera2010-05-251-1/+2
| | | | | | Ethernet/TCP packets of more than ~500 bytes due to an overflow in the checksum calculation loop (thanks to Kevin Malec). Removed string Attributes from the Service Discovery Protocol code to minimise the potential points of failure while the base code is being debugged.
* Added new ADC_DisableChannel() function (thanks to Mich Davis).Dean Camera2010-05-181-1/+1
|
* Fixed AVRISP project not sending a full erase-and-write EEPROM command to ↵Dean Camera2010-05-161-5/+5
| | | | XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
* Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs ↵Dean Camera2010-05-141-14/+16
| | | | after programming or reading from the last page of FLASH.
* Commit for 100513 re-release due to critical device mode bug.Dean Camera2010-05-131-1/+2
|
* Remove incorrect check for the current device state in the Set Configuration ↵Dean Camera2010-05-131-0/+2
| | | | | | request handler of DevChapter9, which broke Set Configuration requests to the device under most circumstances. Move out the SPI prescaler list to a PROGMEM module-level variable in ISPTarget.c.
* Additional fix to the AVRISP-MKII clone project for 256KB AVRs.Dean Camera2010-05-131-1/+1
|
* Fixed AVRISP-MKII clone project not correctly issuing SET EXTENDED ADDRESS ↵Dean Camera2010-05-131-0/+3
| | | | | | commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton). Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
* Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and ↵Dean Camera2010-05-131-0/+2
| | | | the control endpoint is not properly selected when the ISR completes.
* The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and ↵Dean Camera2010-05-131-0/+2
| | | | | | AVRISP-MKII projects has been renamed LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver. Fix Benito makefile which was accidentally changed during testing.
* Removed TeensyHID bootloader, per request from Paul at PJRC.Dean Camera2010-05-121-0/+6
|
* Commit for the 100512 release.Dean Camera2010-05-121-0/+2
|
* Add new ReportType parameter to the HID class driver device callback and ↵Dean Camera2010-05-091-0/+4
| | | | | | host report sending routines. Renamed internal Host mode Class driver descriptor comparator callback routines so that they all start with a uniform DCOMP_{Class Abbreviation}_ prefix.
* Add svn:eol-style property to source files, so that the line endings are ↵Dean Camera2010-05-081-918/+918
| | | | correctly converted to the target system's native end of line style.
* Device mode class driver callbacks are now fired before the control request ↵Dean Camera2010-05-071-0/+2
| | | | | | status stage is sent to prevent the host from timing out if another request is immediately fired and the device has a lengthy callback routine. Inlined currently unused MIDI ProcessControlRequest routine.
* Added new EVENT_CDC_Device_BreakSent() event and CDC_Host_SendBreak() ↵Dean Camera2010-05-061-0/+1
| | | | function to the Device and Host CDC Class drivers.
* Remove incorrect Abstract Call Management class specific descriptor from the ↵Dean Camera2010-05-061-0/+1
| | | | CDC demos, bootloaders and projects.
* Make CDC class bootloader hard-reset the AVR when exited instead of a ↵Dean Camera2010-05-061-0/+3
| | | | | | soft-reset. Reduce size of the TeensyHID bootloader slightly. Fix the TeensyHID bootloader for the larger USB AVR devices, since Paul uses a different (undocumented) addressing scheme on these devices.
* Removed software PDI/TPI emulation from the AVRISP-MKII clone project, as it ↵Dean Camera2010-05-041-2/+3
| | | | was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header.
* Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other ↵Dean Camera2010-05-041-0/+2
| | | | interrupts from occuring while the control endpoint request is being processed, causing possible lockups if a USB interrupt occurs during a transfer.
* Fixed Host mode HID class driver not sending the correct report type when ↵Dean Camera2010-05-041-0/+2
| | | | HID_Host_SendReportByID() was called and the HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set.
* Fixed device state not being reset back to the default state if the host ↵Dean Camera2010-05-041-0/+6
| | | | | | | | sets the address to 0x00. Fixed Set Configuration requests not being stalled until the host has set the device's address. Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
* Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so ↵Dean Camera2010-05-031-1/+3
| | | | that the stream functions early-abort if the bus is suspended before or during a transfer.
* Change AVRISP project's timeout to be interrupt based again, but make the ↵Dean Camera2010-05-021-0/+2
| | | | | | interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code. Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).
* The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() ↵Dean Camera2010-04-291-0/+1
| | | | functions are now inline, to reduce overhead.
* Use puts_P() and printf_P() instead of the normal variants where possible in ↵Dean Camera2010-04-281-0/+1
| | | | the Host mode Class Driver demos.
* USB_Init() no longer calls sei() to enable global interrupts - this must now ↵Dean Camera2010-04-281-0/+1
| | | | be done in the user application once all init code has run.
* Added ability to search by Channel PSM to the GetChannelData() function in ↵Dean Camera2010-04-221-1/+1
| | | | | | | | | | the BluetoothHost demo. Added new HCI states to properly initialize the bluetooth dongle and retrieve the local BDADDR. Factored out Bluetooth state information into a new state structure for easy reference in the user application. Added new StackInitialized() Bluetooth stack callback function.
* Fixed HID Device Class Driver not allocating a temporary buffer when the ↵Dean Camera2010-04-201-0/+2
| | | | | | host requests a report via the control endpoint and the user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski). Clean up incomplete BluetoothHost debugging commands to use GCC extension to avoid NULL parameters when no formatting is required.
* Rename FunctionAttributes.h to Attributes.h, as some attributes are ↵Dean Camera2010-04-151-0/+1
| | | | | | | | applicable to variables also. Add new ATTR_NOINIT attribute for global variables. Add the beginnings of a SDP implentation to the incomplete BluetoothHost demo. Add const attribute to the Mass Storage Host driver functions where it was applicable, but missing.
* Fixed Set/Clear Feature requests directed to a non-configured endpoint not ↵Dean Camera2010-04-141-0/+1
| | | | | | returning a stall to the host. Make TeensyHID bootloader use an 8 byte control endpoint to match the official Teensy, just in case Paul decides to authenticate on that attribute in the future.
* Removed two-step endpoint/pipe bank clear and switch sequence for smaller, ↵Dean Camera2010-04-131-0/+1
| | | | | | | | faster endpoint/pipe code. Added spacing between multiple paragraphs in Doxygen \note sections. Removed call to the clock prescaler reset function in the Teensy bootloader to save space - the user application is accessed via a watchdog reset anyway, so the prescale reset would only affect the speed of the bootloader itself.
* Removed invalid dfu and flip related targets from the bootloaders - ↵Dean Camera2010-04-131-0/+1
| | | | bootloaders can only be replaced with an external programmer.
* Add information request/response signal handler to the Bluetooth Host demo.Dean Camera2010-04-061-1/+1
| | | | Ensure that the AVRISP-MKII project's Windows avrdude compatibility define is named properly in all parts of the code.
* Added WIN_LIBUSB_COMPAT compile time option to the AVRISP programmer project ↵Dean Camera2010-03-311-0/+2
| | | | to make the code compatible with Windows builds of avrdude at the expense of AVRStudio compatibility.
* Added support for the JM-DB-U2 board hardware.Dean Camera2010-03-301-3/+1
|
* Added board hardware driver support for the Benito programmer.Dean Camera2010-03-301-0/+1
|
* Added board hardware driver support for Tom's USBTINY MKII programmer.Dean Camera2010-03-301-0/+1
|
* Add file-level brief documentation.Dean Camera2010-03-291-2/+2
| | | | Remove accidentally duplicated model-specific peripheral driver files.
* All Class Driver Host mode demos now correctly set the board LEDs to READY ↵Dean Camera2010-03-251-0/+3
| | | | | | once the enumeration process has completed. Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending a valid session ID to the device.
* Added new Relay Controller Board project (thanks to OBinou).Dean Camera2010-03-241-0/+2
| | | | Added hardware board driver support for the PJRC Teensy line of USB AVR boards.
* Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report ↵Dean Camera2010-03-241-0/+1
| | | | item data alignment.
* Fixed compilation error in the AudioInput demos when ↵Dean Camera2010-03-241-0/+1
| | | | | | | | MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian). Minor documentation cleanups. Make sure HID class driver uses properly cast pointers when writing to the report buffer.
* Added incomplete MIDIToneGenerator project.Dean Camera2010-03-231-1/+1
|
* Standardized the naming scheme given to configuration descriptor ↵Dean Camera2010-03-221-0/+2
| | | | | | sub-elements in the Device mode demos, bootloaders and projects. Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.
* Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once ↵Dean Camera2010-03-211-0/+1
| | | | the mode selection pin has been sampled.
* Fixed LowLevel MassStorage demo broken on the U2 AVRs due to double-banked ↵Dean Camera2010-03-191-0/+1
| | | | endpoints.
* Remove redundant check in the software PDI programming code of the AVRISP ↵Dean Camera2010-03-171-2/+1
| | | | project.