aboutsummaryrefslogtreecommitdiffstats
path: root/Demos/Host/ClassDriver/MouseHost
Commit message (Collapse)AuthorAgeFilesLines
* Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function ↵Dean Camera2009-11-131-2/+2
| | | | to USB_Host_GetDeviceConfigDescriptor().
* Fixed HID host Class driver report send/receive report broken when issued ↵Dean Camera2009-11-091-1/+0
| | | | | | | | through the control pipe. Make Mass Storage device Class driver accept resets at any time, rather than just after a command block has been processed. Remove the HID device parser from the boot protocol Keyboard/Mouse demos.
* Add optional pipe double banking support to the Host mode Class drivers.Dean Camera2009-11-071-0/+3
| | | | Descriptor processing routines now pass around void pointers rather than uint8_t pointers, as their destination datatype is know well known -- they are just streams of bytes until they are cast to the correct destination type by DESCRIPTOR_CAST.
* Fix invalid Event name rule in demo/project makefiles.Dean Camera2009-10-161-1/+1
|
* Make Audio device demos compatible with AVRs running at 16MHz instead of 8MHz.Dean Camera2009-10-121-3/+2
| | | | Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.
* Application documentation/comment cleanup.Dean Camera2009-10-081-1/+1
|
* Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size ↵Dean Camera2009-09-301-0/+1
| | | | of the HID Host Class driver when Report protocol is not needed.
* Remove old OTG demo directory with useless TestApp demo. Add new DualRole ↵Dean Camera2009-09-291-1/+1
| | | | directory with new Class Driver powered Mouse dual role demonstration application showing a dual role device using the HID host/device Class drivers.
* Fix incorrect names for the HID Host protocol setting routines.Dean Camera2009-09-241-1/+1
|
* Finish initial draft of the Host Mode HID Class driver.Dean Camera2009-09-211-6/+2
| | | | Add new MouseHostWithParser and KeyboardHostWithParser Host Class driver demos.
* Add KeyboardHost HID Host Class driver demo to the library.Dean Camera2009-09-201-3/+0
|
* Finish Class Driver MouseHost demo. Update HID Host Class driver; boot ↵Dean Camera2009-09-202-6/+80
| | | | protocol now works, still need to finish and test report protocol mode.
* Added new Pipe_IsFrozen() macro to determine if the currently selected pipe ↵Dean Camera2009-09-202-2/+34
| | | | | | | | is frozen. Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID. More additions to the unfinished HID Host Class Driver.
* Added support for the officially recommended layout of the external ↵Dean Camera2009-09-171-6/+1
| | | | | | peripherals connected to the BUMBLEB board. Added flag to the HID Host Class driver to indicate the currently selected reporting protocol.
* Fix Mass Storage Host Class driver GetMaxLUN command - incorrect function ↵Dean Camera2009-09-171-0/+8
| | | | | | return codes used in comparison to check for success. Add HID Host Class driver functions to set the report protocol, add more class driver documentation.
* Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out ↵Dean Camera2009-09-091-2/+0
| | | | | | standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project. Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
* Add in new invalid event hook check targets to project makefiles to produce ↵Dean Camera2009-09-061-30/+47
| | | | | | | | compilation errors when invalid event names are used in a project. Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.) Fix allowable F_CPU values comment in project makefiles.
* Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() ↵Dean Camera2009-08-311-3/+2
| | | | function so that it now performs size checks and data validations internally, to simplify user code.
* Replace -finline-limit with -fno-inline-small-functions in project makefiles.Dean Camera2009-08-301-1/+1
|
* Add new functions to the HID host class driver, refine HID interface ↵Dean Camera2009-08-112-2/+1
| | | | | | protocol matching. Remove stray state variable from the CDC host class driver.
* Fixed swapped paremeters in the HID state memory copy call while processing ↵Dean Camera2009-08-111-1/+1
| | | | | | | | | | a HID PUSH item in the HID report parser. Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed. Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro. Make HID host class driver include the HID report parser.
* Fix issue in CDC device class driver where received data the size of the ↵Dean Camera2009-08-111-0/+5
| | | | | | | | data endpoint could lock up the driver. Further work on the new CDC and HID host mode class drivers. Reset changelog et. al. to reset development information for the new version currently under development.
* Make Endpoint control transfers more reliable; early-abort when an ↵Dean Camera2009-08-061-6/+6
| | | | | | incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface. Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.
* Renamed all library events to properly seperate out Device and Host mode ↵Dean Camera2009-08-052-10/+10
| | | | | | | | events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only. Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events. Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
* Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the ↵Dean Camera2009-08-021-3/+2
| | | | existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
* Change project makefiles so that the current target settings and not just ↵Dean Camera2009-07-281-39/+21
| | | | | | the board selection is printed during the build process. Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
* State information for class drivers is now zeroed out during enumeration ↵Dean Camera2009-07-271-5/+0
| | | | (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
* Collapse configuration descriptor size retrieval and size testing into a ↵Dean Camera2009-07-271-10/+3
| | | | single if statement within the new host mode class driver demos for clarity.
* Change Host mode class driver Pipe configuration routines -- better to let ↵Dean Camera2009-07-271-4/+24
| | | | the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
* Add new MouseHost Class Driver demo, unfinished, to allow for better testing ↵Dean Camera2009-07-274-0/+2473
| | | | of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
* Optimize vendor/product description string display code in MassStorageHost.Dean Camera2009-06-265-2669/+0
| | | | | | | | Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed. Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails. Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.
* Fix makefiles -- the auto-addition of -D switches to each LUFA compile time ↵Dean Camera2009-06-191-5/+5
| | | | option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
* Move LUFA compile time options to a new section in the application makefiles ↵Dean Camera2009-06-191-3/+9
| | | | for clarity.
* Remove hardcoded DOT path from all Doxygen config files.Dean Camera2009-06-161-1/+1
| | | | Better documentation for the MissleLauncher project - add credit to PyLauncher project.
* Remove ConfigDescriptor.c/.h files from the ClassDriver Host demos, as they ↵Dean Camera2009-06-154-229/+2
| | | | will be obsoleted when the Host mode class drivers are complete. Add new StillImage stub class driver common header.
* More Doxygen fixes - ensure no undocumented function parameters.Dean Camera2009-06-151-1/+1
|
* Add host mode USB Class driver stubs, add beginnings of a CDC host class driver.Dean Camera2009-06-141-1/+4
| | | | | | Split out common defines/types from class drivers into a seperate common class driver directory. Make central USB Class driver dispatch headers, used for both device and host modes.
* Copy over schedulerless host demos to ClassDrivers directory, for later ↵Dean Camera2009-06-097-0/+2887
| | | | modification to new Host mode USB class drivers.
* Deleted Host ClassDriver demos -- not yet started, faster to rebase new ↵Dean Camera2009-06-097-2938/+0
| | | | | | ClassDriver demos from the newly schedulerless LowLevel host demos rather than re-convert each demo from the previous scheduler-based implementations. Fixes to MassStorageHost demo to improve compatibility with more USB drives.
* Copy existing Host mode demos to new ClassDriver and LowLevel subfolders.Dean Camera2009-06-057-0/+2938
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-18 23:01:42 +0000