aboutsummaryrefslogtreecommitdiffstats
path: root/Demos/Device/ClassDriver
Commit message (Collapse)AuthorAgeFilesLines
* Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new ↵Dean Camera2009-08-1610-43/+26
| | | | USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.
* Adjust endpoint polling intervals for HID demos, to make them compliant with ↵Dean Camera2009-08-135-6/+6
| | | | the 10ms minimum polling period for Low Speed devices.
* Added explicit attribute masks to the device mode demos' descriptors.Dean Camera2009-08-1310-23/+23
|
* Add CDC Host class driver EVENT_CDC_Host_ControLineStateChanged() event.Dean Camera2009-08-111-1/+1
| | | | Minor documentation fixes.
* Fixed swapped paremeters in the HID state memory copy call while processing ↵Dean Camera2009-08-112-18/+4
| | | | | | | | | | a HID PUSH item in the HID report parser. Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed. Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro. Make HID host class driver include the HID report parser.
* Cleanups to RNDIS device demos. Fix issue in RNDIS demos where the memory ↵Dean Camera2009-08-079-35/+45
| | | | | | | | would become corrupted due to an incorrect bounds check when iterating over the port state table, causing random resets. Revert change to Template_Endpoint_Control_R.c, which broke control stream reads. Remove uneeded ADC.h include in the class driver AudioOutput demo.
* Simplify CDC device demos, by directly assigning the string to transmit to ↵Dean Camera2009-08-062-28/+10
| | | | the pointer, rather than using an intermediatary table to hold all the possible transmit strings.
* Fixed issue in USBtoSerial demos where the USART Rx line was not having its ↵Dean Camera2009-08-052-2/+1
| | | | | | | | pullup enabled at startup, leading to noise being received from the Rx pin when left floating. Removed unused relative Common.h header include from the DriverStubs board stub drivers. Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
* Make Control Endpoint stream transfers more reliable by adding in early ↵Dean Camera2009-08-052-12/+17
| | | | | | | | aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes. Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed. Fix incorrect model compatibility information in the Host LowLevel demo overview text files.
* Changed over manual loops waiting for endpoints to be ready to use the ↵Dean Camera2009-08-052-21/+9
| | | | library Endpoint_WaitUntilReady() function for robustness. Fixes issues with terminated transfers on the host locking up USB devices.
* Fix incorrect Event call name in USBInterrupt.c.Dean Camera2009-08-052-5/+5
|
* Renamed all library events to properly seperate out Device and Host mode ↵Dean Camera2009-08-0526-134/+134
| | | | | | | | events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only. Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events. Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
* Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the ↵Dean Camera2009-08-0226-26/+26
| | | | existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
* Make both LowLevel and ClassDriver AudioOutput demos always output to board ↵Dean Camera2009-08-022-21/+14
| | | | LEDs, regardless of output mode (removed AUDIO_OUT_LEDS compile time option from the demo). This allows for positive feedback to the user of audio activity regardless of output mode.
* Fixed the ClassDriver GenericHID demo so that it echoes back reports as ↵Dean Camera2009-07-312-5/+18
| | | | indicated in the demo overview.
* Fix demos based on the device mode HID class driver, as well as the driver ↵Dean Camera2009-07-3110-38/+90
| | | | itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
* Add new HID_Device_MillisecondElapsed() function to the HID device Class ↵Dean Camera2009-07-306-24/+7
| | | | driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
* Fix to HID device mode Class driver, so that new reports are compared ↵Dean Camera2009-07-306-13/+1
| | | | against the old, and updated reports made within the idle period are sent immediately to the host.
* Minor cleanups to DualCDC ClassDriver device demo for clarity.Dean Camera2009-07-302-4/+3
|
* Fix incorrect configuration in the ClassDriver AudioOutput demo.Dean Camera2009-07-305-25/+18
| | | | | | Make all audio device Class Driver functions require a reference to the Audio class instance, so that the endpoint size can be checked (and to standardize the APIs). Make LEDs more responsive in the AudioOutput device demos.
* Set all CDC and MassStorage device mode demos (LowLevel and ClassDriver) to ↵Dean Camera2009-07-304-1/+18
| | | | use the USE_INTERNAL_SERIAL feature, add compile time warnings for devices which do not have an internal serial.
* Added standard stream example to the ClassDriver CDC device demo.Dean Camera2009-07-301-0/+22
| | | | Fix incorrect HWB button mask in the STK526 Buttons driver.
* Fix redefinition warning when USB_DEVICE_ONLY is set on an AVR which does ↵Dean Camera2009-07-301-0/+1
| | | | not support USB host mode.
* Added 404 errors to the RNDIS Webserver example.Dean Camera2009-07-291-19/+54
|
* Change project makefiles so that the current target settings and not just ↵Dean Camera2009-07-2814-508/+276
| | | | | | the board selection is printed during the build process. Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
* Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs ↵Dean Camera2009-07-282-57/+10
| | | | | | where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway. Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
* State information for class drivers is now zeroed out during enumeration ↵Dean Camera2009-07-2713-65/+0
| | | | (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
* Added new Benito project, a simple modified USB-to-Serial bridge for the ↵Dean Camera2009-07-232-3/+2
| | | | programming of AVRs using the official Arduino bootloader.
* Ensure that the USB_DeviceState variable is properly set upon wakeup events, ↵Dean Camera2009-07-232-2/+2
| | | | | | | | to the Addressed or Configured state as needed. Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board. Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
* Added new USB_DeviceState variable to keep track of the current Device mode ↵Dean Camera2009-07-212-5/+21
| | | | | | | | | | | | USB state. Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers. Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality. Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead. Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
* Change Doxygen configuration files to not produce 4096 directories for the ↵Dean Camera2009-07-2014-13/+15
| | | | | | documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories. Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
* Minor updates to the Magstripe and MissileLauncher projects to fix bugs and ↵Dean Camera2009-07-161-2/+2
| | | | | | improve performance. Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
* Added new TOTAL_NUM_CONFIGURATIONS option, removed ↵Dean Camera2009-07-1613-13/+26
| | | | | | USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility). Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
* Added better module summaries.Dean Camera2009-07-141-1/+1
|
* Added compatibility list to the documentation of each individual demo.Dean Camera2009-07-1314-26/+195
| | | | | | Documented FAST_STREAM_TRANSFERS compile time option. Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
* Added incomplete PrinterHost demo application.Dean Camera2009-07-1114-16/+16
| | | | | | Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder. Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
* Minor correction to MagStripe demo to fix build problems.Dean Camera2009-06-291-9/+15
|
* Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for ↵Dean Camera2009-06-291-20/+29
| | | | | | | | the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards. Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index. Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.
* Added const modifiers to device mode class drivers.Dean Camera2009-06-2829-153/+153
| | | | | | Added parameter directions to function parameter documentation. Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
* Reduce struct name pollution - group typedef struct names by class driver ↵Dean Camera2009-06-2617-65/+65
| | | | name where appropriate.
* Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in ↵Dean Camera2009-06-214-22/+4
| | | | some AVR models as the USB device's serial number, added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code. Updated Mass Storage and CDC based demos to use the new device serial number if the device it is compiled for supports it.
* Fix makefiles -- the auto-addition of -D switches to each LUFA compile time ↵Dean Camera2009-06-1913-81/+81
| | | | option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
* Move LUFA compile time options to a new section in the application makefiles ↵Dean Camera2009-06-1913-53/+124
| | | | for clarity.
* Break device mode class driver interfaces into seperate config and state ↵Dean Camera2009-06-1826-224/+352
| | | | structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
* Remove hardcoded DOT path from all Doxygen config files.Dean Camera2009-06-1613-13/+13
| | | | Better documentation for the MissleLauncher project - add credit to PyLauncher project.
* Pipe_GetErrorFlags() now returns additional error flags for overflow and ↵Dean Camera2009-06-161-2/+2
| | | | | | underflow errors. Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.
* Added USB Missle Launcher project, submitted by Dave Fletcher.Dean Camera2009-06-161-2/+2
|
* More Doxygen fixes - ensure no undocumented function parameters.Dean Camera2009-06-1515-13/+16
|
* Doxygen corrections to fix Doxygen warnings in some demos.Dean Camera2009-06-156-1/+10
|
* Add host mode USB Class driver stubs, add beginnings of a CDC host class driver.Dean Camera2009-06-1439-29/+49
| | | | | | Split out common defines/types from class drivers into a seperate common class driver directory. Make central USB Class driver dispatch headers, used for both device and host modes.
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 17:35:00 +0000