aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Switch over the BluetoothHost demo's Service Discovery code to pass around ↵Dean Camera2010-05-182-19/+20
| | | | more generic GUID arrays.
* Added new ADC_DisableChannel() function (thanks to Mich Davis).Dean Camera2010-05-182-1/+44
|
* Begin processing code for Service Discovery Protocol attributes.Dean Camera2010-05-176-43/+91
|
* Fixed AVRISP project not sending a full erase-and-write EEPROM command to ↵Dean Camera2010-05-164-18/+18
| | | | XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
* Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs ↵Dean Camera2010-05-146-62/+58
| | | | after programming or reading from the last page of FLASH.
* Commit for 100513 re-release due to critical device mode bug.Dean Camera2010-05-132-2/+5
|
* Remove incorrect check for the current device state in the Set Configuration ↵Dean Camera2010-05-134-27/+28
| | | | | | request handler of DevChapter9, which broke Set Configuration requests to the device under most circumstances. Move out the SPI prescaler list to a PROGMEM module-level variable in ISPTarget.c.
* Additional fix to the AVRISP-MKII clone project for 256KB AVRs.Dean Camera2010-05-132-19/+15
|
* Fixed AVRISP-MKII clone project not correctly issuing SET EXTENDED ADDRESS ↵Dean Camera2010-05-137-14/+45
| | | | | | commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton). Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
* Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and ↵Dean Camera2010-05-133-2/+8
| | | | the control endpoint is not properly selected when the ISR completes.
* The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and ↵Dean Camera2010-05-1310-15/+14
| | | | | | AVRISP-MKII projects has been renamed LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver. Fix Benito makefile which was accidentally changed during testing.
* Removed TeensyHID bootloader, per request from Paul at PJRC.Dean Camera2010-05-1212-2886/+13
|
* Fix Doxygen treating the license as a documentation source file.Dean Camera2010-05-122-2/+2
|
* Commit for the 100512 release.Dean Camera2010-05-122-1/+5
|
* Fix nasty bug in USBInterrupt.c which would cause a lockup if the control ↵Dean Camera2010-05-112-7/+6
| | | | endpoint was not selected at the point the USB endpoint interrupt fires when INTERRUPT_CONTROL_ENDPOINT is defined.
* Refactor Service Discovery Protocol code in the incomplete Bluetooth Host ↵Dean Camera2010-05-102-53/+72
| | | | demo, so that the UUID list is compiled via a seperate function to allow for its re-use between different SDP request types.
* Add new ReportType parameter to the HID class driver device callback and ↵Dean Camera2010-05-0940-116/+130
| | | | | | host report sending routines. Renamed internal Host mode Class driver descriptor comparator callback routines so that they all start with a uniform DCOMP_{Class Abbreviation}_ prefix.
* Add svn:eol-style property to source files, so that the line endings are ↵Dean Camera2010-05-08839-274562/+274562
| | | | correctly converted to the target system's native end of line style.
* Change over instances of "make" in the makefiles to "$(MAKE)" to allow for ↵Dean Camera2010-05-0778-265/+265
| | | | the make tool to be overridden.
* Device mode class driver callbacks are now fired before the control request ↵Dean Camera2010-05-076-20/+17
| | | | | | status stage is sent to prevent the host from timing out if another request is immediately fired and the device has a lengthy callback routine. Inlined currently unused MIDI ProcessControlRequest routine.
* Don't cast the line encoding baud rate to a uint16_t before performing the ↵Dean Camera2010-05-071-1/+1
| | | | baud rate calculation in the Benito project.
* Fix TeensyHID bootloader for the largest AVRs - only the ATMEGA128x needs ↵Dean Camera2010-05-073-10/+11
| | | | the alternative addressing scheme.
* Change over unix line-endings to dos line endings.Dean Camera2010-05-0717-6714/+6714
|
* Added new EVENT_CDC_Device_BreakSent() event and CDC_Host_SendBreak() ↵Dean Camera2010-05-066-2/+57
| | | | function to the Device and Host CDC Class drivers.
* Remove incorrect Abstract Call Management class specific descriptor from the ↵Dean Camera2010-05-0625-127/+2
| | | | CDC demos, bootloaders and projects.
* Ensure that the CDC class drivers return 0 if the number of unread bytes is ↵Dean Camera2010-05-063-10/+19
| | | | queried and the bank has become empty.
* Make CDC class bootloader hard-reset the AVR when exited instead of a ↵Dean Camera2010-05-067-35/+29
| | | | | | soft-reset. Reduce size of the TeensyHID bootloader slightly. Fix the TeensyHID bootloader for the larger USB AVR devices, since Paul uses a different (undocumented) addressing scheme on these devices.
* Oops - typo in the updated TeensyHID bootloader code when compiled for the ↵Dean Camera2010-05-063-4/+8
| | | | non Teensy++ targets.
* Fixed TeensyHID bootloader so that it works with the official TeensyLoader ↵Dean Camera2010-05-065-13/+42
| | | | GUI application with all supported AVR models.
* Fixed incorrect comparison in the descriptor callback routine of the ↵Dean Camera2010-05-061-1/+1
| | | | TeensyHID bootloader.
* Fix up the ADC driver for the U4 parts to remove a typo on one of the ↵Dean Camera2010-05-041-2/+2
| | | | register names.
* Removed software PDI/TPI emulation from the AVRISP-MKII clone project, as it ↵Dean Camera2010-05-044-295/+11
| | | | was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header.
* Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other ↵Dean Camera2010-05-043-0/+6
| | | | interrupts from occuring while the control endpoint request is being processed, causing possible lockups if a USB interrupt occurs during a transfer.
* Fixed Host mode HID class driver not sending the correct report type when ↵Dean Camera2010-05-042-1/+3
| | | | HID_Host_SendReportByID() was called and the HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set.
* Fixed device state not being reset back to the default state if the host ↵Dean Camera2010-05-045-43/+54
| | | | | | | | sets the address to 0x00. Fixed Set Configuration requests not being stalled until the host has set the device's address. Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
* Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so ↵Dean Camera2010-05-039-10/+34
| | | | that the stream functions early-abort if the bus is suspended before or during a transfer.
* Increase hardware PDI/TPI programming speed to 1MHz in the AVRISP MKII clone ↵Dean Camera2010-05-023-3/+4
| | | | project.
* Switch back to C based timeout ISR in the AVRISP project - assembly version ↵Dean Camera2010-05-025-26/+22
| | | | was failing, and only one or two cycles could be shaved off the compiler generated code.
* Change AVRISP project's timeout to be interrupt based again, but make the ↵Dean Camera2010-05-0211-117/+66
| | | | | | interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code. Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).
* Make sure that long reads are aborted early if the connection times out ↵Dean Camera2010-04-303-5/+8
| | | | while waiting on more bytes in the AVRISP MKII clone project.
* Make sure that the NVM bus/controller busy waits in the AVRISP MKII clone ↵Dean Camera2010-04-303-15/+54
| | | | project abort properly if a timeout occurs while waiting for a response.
* The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() ↵Dean Camera2010-04-295-32/+33
| | | | functions are now inline, to reduce overhead.
* Use puts_P() and printf_P() instead of the normal variants where possible in ↵Dean Camera2010-04-2819-122/+117
| | | | the Host mode Class Driver demos.
* Oops - relocated USBInterrupt.h header file requires adjusted include paths ↵Dean Camera2010-04-281-3/+3
| | | | for the other USB driver header files.
* Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the ↵Dean Camera2010-04-2875-145/+148
| | | | LowLevel directory as it is hardware-dependent.
* Remove incomplete/nonfunctional MIDI class bootloader.Dean Camera2010-04-2810-3344/+1
|
* USB_Init() no longer calls sei() to enable global interrupts - this must now ↵Dean Camera2010-04-28135-61/+181
| | | | be done in the user application once all init code has run.
* Make AVRISP-MKII clone project's software PDI/TPI mode more robust by ↵Dean Camera2010-04-281-14/+25
| | | | keeping track of timeouts while waiting for a Tx/Rx to finish.
* Fix TeensyHID bootloader Doxygen configuration file's CREATE_SUBDIRS options ↵Dean Camera2010-04-272-2/+2
| | | | set to true instead of false (thanks to Andrei Krainev).
* Added ability to search by Channel PSM to the GetChannelData() function in ↵Dean Camera2010-04-2211-105/+199
| | | | | | | | | | the BluetoothHost demo. Added new HCI states to properly initialize the bluetooth dongle and retrieve the local BDADDR. Factored out Bluetooth state information into a new state structure for easy reference in the user application. Added new StackInitialized() Bluetooth stack callback function.
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 11:08:24 +0000