diff options
Diffstat (limited to 'Projects')
111 files changed, 1756 insertions, 4675 deletions
diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.h b/Projects/AVRISP-MKII/AVRISP-MKII.h index 217030524..86e30d6c8 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.h +++ b/Projects/AVRISP-MKII/AVRISP-MKII.h @@ -42,7 +42,6 @@ #include <avr/interrupt.h> #include <avr/power.h> - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> @@ -52,6 +51,7 @@ #include "Descriptors.h" #include "Lib/V2Protocol.h" + #include "Config/AppConfig.h" /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt index 3d43cb137..cd1faf094 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.txt +++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt @@ -214,60 +214,60 @@ * </tr> * <tr> * <td>AUX_LINE_PORT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>AUX_LINE_PIN</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>AUX_LINE_DDR</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>AUX_LINE_MASK</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>. * \n \n <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>VTARGET_ADC_CHANNEL</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined. * \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td> * </tr> * <tr> * <td>ENABLE_ISP_PROTOCOL</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to enable SPI programming protocol support. * \n \n <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>ENABLE_XPROG_PROTOCOL</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to enable PDI and TPI programming protocol support. * \n \n <i>Ignored when compiled for the XPLAIN board.</i></td> * </tr> * <tr> * <td>NO_VTARGET_DETECT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer * to report a fixed 3.3V target voltage to the host regardless of the real target voltage. * \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td> * </tr> * <tr> * <td>VTARGET_REF_VOLTS</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply * voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage * to the ADC. @@ -275,14 +275,14 @@ * </tr> * <tr> * <td>VTARGET_USE_INTERNAL_REF</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will * override the VTARGET_REF_VOLTS configuration option. * \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td> * </tr> * <tr> * <td>VTARGET_SCALE_FACTOR</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the * ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be * measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set @@ -291,7 +291,7 @@ * </tr> * <tr> * <td>LIBUSB_DRIVER_COMPAT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making * the code compatible with software such as avrdude (all platforms) that use the libUSB driver. * @@ -299,7 +299,7 @@ * </tr> * <tr> * <td>RESET_TOGGLES_LIBUSB_COMPAT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is * reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between * power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out. @@ -308,19 +308,19 @@ * </tr> * <tr> * <td>XCK_RESCUE_CLOCK_ENABLE</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming * hardware that does not expose the OCR1A pin of the AVR, but <i>may</i> cause some issues with PDI programming mode.</td> * </tr> * <tr> * <td>INVERTED_ISP_MISO</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to invert the received data on the ISP MISO line. This is sometimes needed depending on the level translation hardware used, * if the translator hardware inverts the received logic level.</td> * </tr> * <tr> * <td>FIRMWARE_VERSION_MINOR</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td> * </tr> diff --git a/Projects/AVRISP-MKII/Config/AppConfig.h b/Projects/AVRISP-MKII/Config/AppConfig.h new file mode 100644 index 000000000..26198e3d7 --- /dev/null +++ b/Projects/AVRISP-MKII/Config/AppConfig.h @@ -0,0 +1,66 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define AUX_LINE_PORT PORTB + #define AUX_LINE_PIN PINB + #define AUX_LINE_DDR DDRB + #define AUX_LINE_MASK (1 << 4) + + #define ENABLE_ISP_PROTOCOL + #define ENABLE_XPROG_PROTOCOL + + #define VTARGET_ADC_CHANNEL 2 + #define VTARGET_REF_VOLTS 5 + #define VTARGET_SCALE_FACTOR 1 +// #define VTARGET_USE_INTERNAL_REF +// #define NO_VTARGET_DETECT +// #define XCK_RESCUE_CLOCK_ENABLE +// #define INVERTED_ISP_MISO + +// #define LIBUSB_DRIVER_COMPAT +// #define RESET_TOGGLES_LIBUSB_COMPAT +// #define FIRMWARE_VERSION_MINOR 0x11 + +#endif
\ No newline at end of file diff --git a/Projects/AVRISP-MKII/Config/LUFAConfig.h b/Projects/AVRISP-MKII/Config/LUFAConfig.h new file mode 100644 index 000000000..2071bfdd1 --- /dev/null +++ b/Projects/AVRISP-MKII/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 16 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/AVRISP-MKII/Descriptors.h b/Projects/AVRISP-MKII/Descriptors.h index 675291afb..1ff25635e 100644 --- a/Projects/AVRISP-MKII/Descriptors.h +++ b/Projects/AVRISP-MKII/Descriptors.h @@ -42,6 +42,8 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if defined(LIBUSB_DRIVER_COMPAT) && defined(RESET_TOGGLES_LIBUSB_COMPAT) #error LIBUSB_DRIVER_COMPAT and RESET_TOGGLES_LIBUSB_COMPAT are mutually exclusive. diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h index 4ad526390..7f65e46b4 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h @@ -43,7 +43,8 @@ #include <LUFA/Drivers/USB/USB.h> #include "../V2Protocol.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h index 9124b1a6b..4c0ea8245 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h @@ -44,8 +44,10 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SPI.h> - #include "../V2ProtocolParams.h" - + #include "../V2Protocol.h" + #include "ISPProtocol.h" + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.h b/Projects/AVRISP-MKII/Lib/V2Protocol.h index dca97cb2a..35cd13928 100644 --- a/Projects/AVRISP-MKII/Lib/V2Protocol.h +++ b/Projects/AVRISP-MKII/Lib/V2Protocol.h @@ -46,9 +46,10 @@ #include "../Descriptors.h" #include "V2ProtocolConstants.h" #include "V2ProtocolParams.h" - #include "ISP/ISPProtocol.h" +// #include "ISP/ISPProtocol.h" #include "XPROG/XPROGProtocol.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h index ab47664d3..53cad8ded 100644 --- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h +++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h @@ -40,8 +40,6 @@ #include <avr/io.h> #include <avr/eeprom.h> - #include <LUFA/Version.h> - #if defined(ADC) #include <LUFA/Drivers/Peripheral/ADC.h> #endif @@ -49,7 +47,8 @@ #include "V2Protocol.h" #include "V2ProtocolConstants.h" #include "ISP/ISPTarget.h" - + #include "Config/AppConfig.h" + /* Macros: */ /** Parameter privilege mask to allow the host PC to read the parameter's value. */ #define PARAM_PRIV_READ (1 << 0) diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h index c028321b0..696e5f5b8 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h @@ -45,7 +45,8 @@ #include "XPROGProtocol.h" #include "XPROGTarget.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h index a8704df3c..2789d0217 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h @@ -45,7 +45,8 @@ #include "XPROGProtocol.h" #include "XPROGTarget.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h index 605653588..2d99d5656 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h @@ -46,7 +46,8 @@ #include "../V2Protocol.h" #include "XMEGANVM.h" #include "TINYNVM.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) /* On the XPLAIN board, we only need PDI programming diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h index 09c6ee587..2df1e38a1 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h @@ -45,7 +45,8 @@ #include "../V2Protocol.h" #include "XPROGProtocol.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile index cf1e99515..f3a457e20 100644 --- a/Projects/AVRISP-MKII/makefile +++ b/Projects/AVRISP-MKII/makefile @@ -120,32 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_DEVICE_SELF_POWER - -LUFA_OPTS += -D AUX_LINE_PORT=PORTB -LUFA_OPTS += -D AUX_LINE_PIN=PINB -LUFA_OPTS += -D AUX_LINE_DDR=DDRB -LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)" -LUFA_OPTS += -D ENABLE_ISP_PROTOCOL -LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL -LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2 -LUFA_OPTS += -D VTARGET_REF_VOLTS=5 -LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1 -#LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF -#LUFA_OPTS += -D NO_VTARGET_DETECT -#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT -#LUFA_OPTS += -D RESET_TOGGLES_LIBUSB_COMPAT -#LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE -#LUFA_OPTS += -D INVERTED_ISP_MISO -#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -197,7 +172,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Benito/Benito.h b/Projects/Benito/Benito.h index 9b91c7c40..8585fc4ad 100644 --- a/Projects/Benito/Benito.h +++ b/Projects/Benito/Benito.h @@ -42,8 +42,8 @@ #include <avr/interrupt.h> #include "Descriptors.h" + #include "Config/AppConfig.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Peripheral/Serial.h> #include <LUFA/Drivers/Misc/RingBuffer.h> diff --git a/Projects/Benito/Benito.txt b/Projects/Benito/Benito.txt index b4fb05316..371296139 100644 --- a/Projects/Benito/Benito.txt +++ b/Projects/Benito/Benito.txt @@ -68,37 +68,37 @@ * </tr> * <tr> * <td>AVR_RESET_LINE_PORT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td> * </tr> * <tr> * <td>AVR_RESET_LINE_DDR</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td> * </tr> * <tr> * <td>AVR_RESET_LINE_MASK</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td> * </tr> * <tr> * <td>AVR_RESET_PULSE_MS</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Pulse length in milliseconds for the target /RESET pulse.</td> * </tr> * <tr> * <td>TX_RX_LED_PULSE_MS</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td> * </tr> * <tr> * <td>PING_PONG_LED_PULSE_MS</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td> * </tr> * <tr> * <td>RECEIVE_BUFFER_FLUSH_MS</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Period between flushings of received data buffer to the attached USB host.</td> * </tr> * </table> diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.h b/Projects/Benito/Config/AppConfig.h index 80eafbe3f..ce511ebbe 100644 --- a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.h +++ b/Projects/Benito/Config/AppConfig.h @@ -29,33 +29,29 @@ */ /** \file + * \brief Application Configuration Header File * - * Header file for DiskDevice.c. + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. */ -#ifndef _DISK_DEVICE_H_ -#define _DISK_DEVICE_H_ - - /* Includes: */ - #include <avr/io.h> - - #include "Descriptors.h" - #include "StandaloneProgrammer.h" - - #include <LUFA/Drivers/USB/USB.h> - #include <LUFA/Drivers/Board/LEDs.h> +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ - /* Function Prototypes: */ - #if defined(USB_CAN_BE_DEVICE) - void DiskDevice_USBTask(void); + #define AVR_RESET_LINE_PORT PORTD + #define AVR_RESET_LINE_DDR DDRD + #define AVR_RESET_LINE_MASK (1 << 4) - void EVENT_USB_Device_Connect(void); - void EVENT_USB_Device_Disconnect(void); - void EVENT_USB_Device_ConfigurationChanged(void); - void EVENT_USB_Device_ControlRequest(void); + #define AVR_RESET_PULSE_MS 10 - bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - #endif + #define TX_RX_LED_PULSE_MS 30 + #define PING_PONG_LED_PULSE_MS 100 -#endif + #define RECEIVE_BUFFER_FLUSH_MS 10 +#endif
\ No newline at end of file diff --git a/Projects/Benito/Config/LUFAConfig.h b/Projects/Benito/Config/LUFAConfig.h new file mode 100644 index 000000000..3921cd684 --- /dev/null +++ b/Projects/Benito/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile index 4b8f1e50e..ff3828e68 100644 --- a/Projects/Benito/makefile +++ b/Projects/Benito/makefile @@ -120,22 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - -LUFA_OPTS += -D AVR_RESET_LINE_PORT="PORTD" -LUFA_OPTS += -D AVR_RESET_LINE_DDR="DDRD" -LUFA_OPTS += -D AVR_RESET_LINE_MASK="(1 << 4)" -LUFA_OPTS += -D AVR_RESET_PULSE_MS=10 -LUFA_OPTS += -D TX_RX_LED_PULSE_MS=30 -LUFA_OPTS += -D PING_PONG_LED_PULSE_MS=100 -LUFA_OPTS += -D RECEIVE_BUFFER_FLUSH_MS=10 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -180,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/HIDReportViewer/Config/LUFAConfig.h b/Projects/HIDReportViewer/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Projects/HIDReportViewer/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/HIDReportViewer/HIDReportViewer.h b/Projects/HIDReportViewer/HIDReportViewer.h index 64f5843ad..79440b2a2 100644 --- a/Projects/HIDReportViewer/HIDReportViewer.h +++ b/Projects/HIDReportViewer/HIDReportViewer.h @@ -45,7 +45,6 @@ #include <stdio.h> #include <inttypes.h> - #include <LUFA/Version.h> #include <LUFA/Drivers/Misc/TerminalCodes.h> #include <LUFA/Drivers/Peripheral/Serial.h> #include <LUFA/Drivers/Board/LEDs.h> diff --git a/Projects/HIDReportViewer/makefile b/Projects/HIDReportViewer/makefile index 504c46bb4..519d49954 100644 --- a/Projects/HIDReportViewer/makefile +++ b/Projects/HIDReportViewer/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c b/Projects/Incomplete/StandaloneProgrammer/Descriptors.c deleted file mode 100644 index 61176e607..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. - */ - -#include "Descriptors.h" - -#if defined(USB_CAN_BE_DEVICE) - -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif - -/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall - * device characteristics, including the supported USB version, control endpoint size and the - * number of device configurations. The descriptor is read out by the USB host when the enumeration - * process begins. - */ -const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(01.10), - .Class = USB_CSCP_NoDeviceClass, - .SubClass = USB_CSCP_NoDeviceSubclass, - .Protocol = USB_CSCP_NoDeviceProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - .VendorID = 0x03EB, - .ProductID = 0x2063, - .ReleaseNumber = VERSION_BCD(00.01), - - .ManufacturerStrIndex = 0x01, - .ProductStrIndex = 0x02, - .SerialNumStrIndex = USE_INTERNAL_SERIAL, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage - * of the device in one of its supported configurations, including information about any device interfaces - * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting - * a configuration so that the host may correctly communicate with the USB device. - */ -const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = 1, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - .MS_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = 0, - .AlternateSetting = 0, - - .TotalEndpoints = 2, - - .Class = MS_CSCP_MassStorageClass, - .SubClass = MS_CSCP_SCSITransparentSubclass, - .Protocol = MS_CSCP_BulkOnlyTransportProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .MS_DataInEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = MASS_STORAGE_IN_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x05 - }, - - .MS_DataOutEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = MASS_STORAGE_OUT_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x05 - } -}; - -/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests - * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate - * via the language ID table available at USB.org what languages the device supports for its string descriptors. - */ -const USB_Descriptor_String_t PROGMEM LanguageString = -{ - .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - - .UnicodeString = {LANGUAGE_ID_ENG} -}; - -/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable - * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ManufacturerString = -{ - .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - - .UnicodeString = L"Dean Camera" -}; - -/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, - * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ProductString = -{ - .Header = {.Size = USB_STRING_LEN(26), .Type = DTYPE_String}, - - .UnicodeString = L"LUFA Standalone Programmer" -}; - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorNumber = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - switch (DescriptorNumber) - { - case 0x00: - Address = &LanguageString; - Size = pgm_read_byte(&LanguageString.Header.Size); - break; - case 0x01: - Address = &ManufacturerString; - Size = pgm_read_byte(&ManufacturerString.Header.Size); - break; - case 0x02: - Address = &ProductString; - Size = pgm_read_byte(&ProductString.Header.Size); - break; - } - - break; - } - - *DescriptorAddress = Address; - return Size; -} - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h b/Projects/Incomplete/StandaloneProgrammer/Descriptors.h deleted file mode 100644 index c0e8f46d7..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Descriptors.c. - */ - -#ifndef _DESCRIPTORS_H_ -#define _DESCRIPTORS_H_ - - /* Includes: */ - #include <avr/pgmspace.h> - - #include <LUFA/Drivers/USB/USB.h> - - /* Macros: */ - /** Endpoint address of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5) - - /** Endpoint address of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - - /** Endpoint address of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - - /** Size in bytes of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPSIZE 8 - - /** Size in bytes of the CDC data IN and OUT endpoints. */ - #define CDC_TXRX_EPSIZE 16 - - /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - - /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) - - /** Size in bytes of the Mass Storage data endpoints. */ - #define MASS_STORAGE_IO_EPSIZE 64 - - /* Type Defines: */ - /** Type define for the device configuration descriptor structure. This must be defined in the - * application code, as the configuration descriptor contains several sub-descriptors which - * vary between devices, and which describe the device's usage to the host. - */ - typedef struct - { - USB_Descriptor_Configuration_Header_t Config; - - // Mass Storage Interface - USB_Descriptor_Interface_t MS_Interface; - USB_Descriptor_Endpoint_t MS_DataInEndpoint; - USB_Descriptor_Endpoint_t MS_DataOutEndpoint; - } USB_Descriptor_Configuration_t; - - /* Function Prototypes: */ - uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c b/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c deleted file mode 100644 index 73bf5545a..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "DiskDevice.h" - -#if defined(USB_CAN_BE_DEVICE) -/** LUFA Mass Storage Class driver interface configuration and state information. This structure is - * passed to all Mass Storage Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_MS_Device_t DiskDevice_MS_Interface = - { - .Config = - { - .InterfaceNumber = 0, - .DataINEndpoint = - { - .Address = MASS_STORAGE_IN_EPADDR, - .Size = MASS_STORAGE_IO_EPSIZE, - .Banks = 1, - }, - .DataOUTEndpoint = - { - .Address = MASS_STORAGE_OUT_EPADDR, - .Size = MASS_STORAGE_IO_EPSIZE, - .Banks = 1, - }, - .TotalLUNs = 1, - }, - }; - - -void DiskDevice_USBTask(void) -{ - MS_Device_USBTask(&DiskDevice_MS_Interface); -} - -/** Event handler for the library USB Connection event. */ -void EVENT_USB_Device_Connect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the library USB Disconnection event. */ -void EVENT_USB_Device_Disconnect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - bool ConfigSuccess = true; - - ConfigSuccess &= MS_Device_ConfigureEndpoints(&DiskDevice_MS_Interface); - - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); -} - -/** Event handler for the library USB Control Request reception event. */ -void EVENT_USB_Device_ControlRequest(void) -{ - MS_Device_ProcessControlRequest(&DiskDevice_MS_Interface); -} - -/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface configuration structure being referenced - */ -bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - bool CommandSuccess; - - LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); - LEDs_SetAllLEDs(LEDMASK_USB_READY); - - return CommandSuccess; -} -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c b/Projects/Incomplete/StandaloneProgrammer/DiskHost.c deleted file mode 100644 index c93029c06..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "DiskHost.h" - -#if defined(USB_CAN_BE_HOST) -/** LUFA Mass Storage Class driver interface configuration and state information. This structure is - * passed to all Mass Storage Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_MS_Host_t DiskHost_MS_Interface = - { - .Config = - { - .DataINPipe = - { - .Address = (PIPE_DIR_IN | 1), - .Banks = 1, - }, - .DataOUTPipe = - { - .Address = (PIPE_DIR_OUT | 2), - .Banks = 1, - }, - }, - }; - - -void DiskHost_USBTask(void) -{ - MS_Host_USBTask(&DiskHost_MS_Interface); -} - -void EVENT_USB_Host_DeviceEnumerationComplete(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - - uint16_t ConfigDescriptorSize; - uint8_t ConfigDescriptorData[512]; - - if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, - sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (MS_Host_ConfigurePipes(&DiskHost_MS_Interface, - ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - uint8_t MaxLUNIndex; - if (MS_Host_GetMaxLUN(&DiskHost_MS_Interface, &MaxLUNIndex)) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (MS_Host_ResetMSInterface(&DiskHost_MS_Interface)) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - SCSI_Request_Sense_Response_t SenseData; - if (MS_Host_RequestSense(&DiskHost_MS_Interface, 0, &SenseData) != 0) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - pf_mount(&DiskFATState); - - LEDs_SetAllLEDs(LEDMASK_USB_READY); -} - -void EVENT_USB_Host_DeviceAttached(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -void EVENT_USB_Host_DeviceUnattached(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c b/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c deleted file mode 100644 index efaf8b096..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c +++ /dev/null @@ -1,536 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Functions to manage the physical Dataflash media, including reading and writing of - * blocks of data. These functions are called by the SCSI layer when data must be stored - * or retrieved to/from the physical storage media. If a different media is used (such - * as a SD card or EEPROM), functions similar to these will need to be generated. - */ - -#define INCLUDE_FROM_DATAFLASHMANAGER_C -#include "DataflashManager.h" - -#if defined(USB_CAN_BE_DEVICE) -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from - * the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes - * them to the Dataflash in Dataflash page sized blocks. - * - * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state - * \param[in] BlockAddress Data block starting address for the write sequence - * \param[in] TotalBlocks Number of blocks of data to write - */ -void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - bool UsingSecondBuffer = false; - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, CurrDFPageByte); - - /* Wait until endpoint is ready before continuing */ - if (Endpoint_WaitUntilReady()) - return; - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if the endpoint is currently empty */ - if (!(Endpoint_IsReadWriteAllowed())) - { - /* Clear the current endpoint bank */ - Endpoint_ClearOUT(); - - /* Wait until the host has sent another packet */ - if (Endpoint_WaitUntilReady()) - return; - } - - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0); - - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ - if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) - UsingSecondBuffer = !(UsingSecondBuffer); - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ - if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); - } -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); - } - - /* Write one 16-byte chunk of data to the Dataflash */ - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - - /* Check if the current command is being aborted by the host */ - if (MSInterfaceInfo->State.IsMassStoreReset) - return; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0x00); - Dataflash_WaitWhileBusy(); - - /* If the endpoint is empty, clear it ready for the next packet from the host */ - if (!(Endpoint_IsReadWriteAllowed())) - Endpoint_ClearOUT(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into - * the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash - * and writes them in OS sized blocks to the endpoint. - * - * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state - * \param[in] BlockAddress Data block starting address for the read sequence - * \param[in] TotalBlocks Number of blocks of data to read - */ -void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - - /* Wait until endpoint is ready before continuing */ - if (Endpoint_WaitUntilReady()) - return; - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if the endpoint is currently full */ - if (!(Endpoint_IsReadWriteAllowed())) - { - /* Clear the endpoint bank to send its contents to the host */ - Endpoint_ClearIN(); - - /* Wait until the endpoint is ready for more data */ - if (Endpoint_WaitUntilReady()) - return; - } - - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - } - - /* Read one 16-byte chunk of data from the Dataflash */ - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - - /* Check if the current command is being aborted by the host */ - if (MSInterfaceInfo->State.IsMassStoreReset) - return; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* If the endpoint is full, send its contents to the host */ - if (!(Endpoint_IsReadWriteAllowed())) - Endpoint_ClearIN(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from - * the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the - * Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the - * Dataflash. - * - * \param[in] BlockAddress Data block starting address for the write sequence - * \param[in] TotalBlocks Number of blocks of data to write - * \param[in] BufferPtr Pointer to the data source RAM buffer - */ -void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - const uint8_t* BufferPtr) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - bool UsingSecondBuffer = false; - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, CurrDFPageByte); - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0); - - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ - if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) - UsingSecondBuffer = !(UsingSecondBuffer); - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ - if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); - } -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_ToggleSelectedChipCS(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); - } - - /* Write one 16-byte chunk of data to the Dataflash */ - for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) - Dataflash_SendByte(*(BufferPtr++)); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0x00); - Dataflash_WaitWhileBusy(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into - * the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash - * and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read - * the files stored on the Dataflash. - * - * \param[in] BlockAddress Data block starting address for the read sequence - * \param[in] TotalBlocks Number of blocks of data to read - * \param[out] BufferPtr Pointer to the data destination RAM buffer - */ -void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - } - - /* Read one 16-byte chunk of data from the Dataflash */ - for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) - *(BufferPtr++) = Dataflash_ReceiveByte(); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */ -void DataflashManager_ResetDataflashProtections(void) -{ - /* Select first Dataflash chip, send the read status register command */ - Dataflash_SelectChip(DATAFLASH_CHIP1); - Dataflash_SendByte(DF_CMD_GETSTATUS); - - /* Check if sector protection is enabled */ - if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) - { - Dataflash_ToggleSelectedChipCS(); - - /* Send the commands to disable sector protection */ - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); - } - - /* Select second Dataflash chip (if present on selected board), send read status register command */ - #if (DATAFLASH_TOTALCHIPS == 2) - Dataflash_SelectChip(DATAFLASH_CHIP2); - Dataflash_SendByte(DF_CMD_GETSTATUS); - - /* Check if sector protection is enabled */ - if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) - { - Dataflash_ToggleSelectedChipCS(); - - /* Send the commands to disable sector protection */ - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); - } - #endif - - /* Deselect current Dataflash chip */ - Dataflash_DeselectChip(); -} - -/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. - * - * \return Boolean true if all media chips are working, false otherwise - */ -bool DataflashManager_CheckDataflashOperation(void) -{ - uint8_t ReturnByte; - - /* Test first Dataflash IC is present and responding to commands */ - Dataflash_SelectChip(DATAFLASH_CHIP1); - Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); - ReturnByte = Dataflash_ReceiveByte(); - Dataflash_DeselectChip(); - - /* If returned data is invalid, fail the command */ - if (ReturnByte != DF_MANUFACTURER_ATMEL) - return false; - - #if (DATAFLASH_TOTALCHIPS == 2) - /* Test second Dataflash IC is present and responding to commands */ - Dataflash_SelectChip(DATAFLASH_CHIP2); - Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); - ReturnByte = Dataflash_ReceiveByte(); - Dataflash_DeselectChip(); - - /* If returned data is invalid, fail the command */ - if (ReturnByte != DF_MANUFACTURER_ATMEL) - return false; - #endif - - return true; -} -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h b/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h deleted file mode 100644 index d353477da..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for DataflashManager.c. - */ - -#ifndef _DATAFLASH_MANAGER_H_ -#define _DATAFLASH_MANAGER_H_ - - /* Includes: */ - #include <avr/io.h> - - #include "../StandaloneProgrammer.h" - #include "../Descriptors.h" - - #include <LUFA/Drivers/USB/USB.h> - #include <LUFA/Drivers/Board/Dataflash.h> - - /* Preprocessor Checks: */ - #if (DATAFLASH_PAGE_SIZE % 16) - #error Dataflash page size must be a multiple of 16 bytes. - #endif - - /* Defines: */ - /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */ - #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS) - - /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying - * storage media (Dataflash) using a different native block size. Do not change this value. - */ - #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - - /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not - * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size. - */ - #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - - /** Indicates if the disk is write protected or not. */ - #define DISK_READ_ONLY false - - /* Function Prototypes: */ - #if defined(USB_CAN_BE_DEVICE) - void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks); - void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks); - void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - const uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); - void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); - void DataflashManager_ResetDataflashProtections(void); - bool DataflashManager_CheckDataflashOperation(void); - #endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt deleted file mode 100644 index 26816072d..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt +++ /dev/null @@ -1,42 +0,0 @@ -Petit FatFs Module Source Files R0.02a (C)ChaN, 2010 - - -FILES - - pff.h Common include file for Petit FatFs and application module. - pff.c Petit FatFs module. - diskio.h Common include file for Petit FatFs and disk I/O module. - diskio.c Skeleton of low level disk I/O module. - integer.h Alternative type definitions for integer variables. - - Low level disk I/O module is not included in this archive because the Petit - FatFs module is only a generic file system layer and not depend on any - specific storage device. You have to provide a low level disk I/O module that - written to control your storage device. - - - -AGREEMENTS - - Petit FatFs module is an open source software to implement FAT file system to - small embedded systems. This is a free software and is opened for education, - research and commercial developments under license policy of following trems. - - Copyright (C) 2010, ChaN, all right reserved. - - * The Petit FatFs module is a free software and there is NO WARRANTY. - * No restriction on use. You can use, modify and redistribute it for - personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY. - * Redistributions of source code must retain the above copyright notice. - - - -REVISION HISTORY - - Jun 15, 2009 R0.01a First release (Branched from FatFs R0.07b) - Dec 14, 2009 R0.02 Added multiple code page support. - Added write funciton. - Changed stream read mode interface. - Dec 07,'2010 R0.02a Added some configuration options. - Fixed fails to open objects with DBCS character. - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c deleted file mode 100644 index d953875a2..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c +++ /dev/null @@ -1,57 +0,0 @@ -/*-----------------------------------------------------------------------*/ -/* Low level disk I/O module skeleton for Petit FatFs (C)ChaN, 2009 */ -/*-----------------------------------------------------------------------*/ - -#include "diskio.h" - -#include <string.h> -#include <LUFA/Drivers/USB/USB.h> -#include "../DataflashManager.h" -#include "../../DiskHost.h" - -/*-----------------------------------------------------------------------*/ -/* Initialize Disk Drive */ -/*-----------------------------------------------------------------------*/ - -DSTATUS disk_initialize (void) -{ - return RES_OK; -} - - - -/*-----------------------------------------------------------------------*/ -/* Read Partial Sector */ -/*-----------------------------------------------------------------------*/ - -DRESULT disk_readp ( - BYTE* dest, /* Pointer to the destination object */ - DWORD sector, /* Sector number (LBA) */ - WORD sofs, /* Offset in the sector */ - WORD count /* Byte count (bit15:destination) */ -) -{ - DRESULT ErrorCode = RES_OK; - uint8_t BlockTemp[512]; - - if (USB_CurrentMode == USB_MODE_Host) - { - #if defined(USB_CAN_BE_HOST) - if (USB_HostState != HOST_STATE_Configured) - ErrorCode = RES_NOTRDY; - else if (MS_Host_ReadDeviceBlocks(&DiskHost_MS_Interface, 0, sector, 1, 512, BlockTemp)) - ErrorCode = RES_ERROR; - #endif - } - else - { - #if defined(USB_CAN_BE_DEVICE) - DataflashManager_ReadBlocks_RAM(sector, 1, BlockTemp); - #endif - } - - memcpy(dest, &BlockTemp[sofs], count); - - return ErrorCode; -} - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h deleted file mode 100644 index 239d45913..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h +++ /dev/null @@ -1,34 +0,0 @@ -/*----------------------------------------------------------------------- -/ PFF - Low level disk interface module include file (C)ChaN, 2010 -/-----------------------------------------------------------------------*/ - -#ifndef _DISKIO - -#include "integer.h" - - -/* Status of Disk Functions */ -typedef BYTE DSTATUS; - - -/* Results of Disk Functions */ -typedef enum { - RES_OK = 0, /* 0: Function succeeded */ - RES_ERROR, /* 1: Disk error */ - RES_NOTRDY, /* 2: Not ready */ - RES_PARERR /* 3: Invalid parameter */ -} DRESULT; - - -/*---------------------------------------*/ -/* Prototypes for disk control functions */ - -DSTATUS disk_initialize (void); -DRESULT disk_readp (BYTE*, DWORD, WORD, WORD); - -#define STA_NOINIT 0x01 /* Drive not initialized */ -#define STA_NODISK 0x02 /* No medium in the drive */ - -#define _DISKIO -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h deleted file mode 100644 index 5408fe6b3..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h +++ /dev/null @@ -1,38 +0,0 @@ -/*-------------------------------------------*/ -/* Integer type definitions for FatFs module */ -/*-------------------------------------------*/ - -#ifndef _INTEGER -#define _INTEGER - -#ifdef _WIN32 /* FatFs development platform */ - -#include <windows.h> -#include <tchar.h> - -#else /* Embedded platform */ - -/* These types must be 16-bit, 32-bit or larger integer */ -typedef int INT; -typedef unsigned int UINT; - -/* These types must be 8-bit integer */ -typedef char CHAR; -typedef unsigned char UCHAR; -typedef unsigned char BYTE; - -/* These types must be 16-bit integer */ -typedef short SHORT; -typedef unsigned short USHORT; -typedef unsigned short WORD; -typedef unsigned short WCHAR; - -/* These types must be 32-bit integer */ -typedef long LONG; -typedef unsigned long ULONG; -typedef unsigned long DWORD; - -#endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c deleted file mode 100644 index 29e44f620..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c +++ /dev/null @@ -1,1114 +0,0 @@ -/*----------------------------------------------------------------------------/ -/ Petit FatFs - FAT file system module R0.02a (C)ChaN, 2010 -/-----------------------------------------------------------------------------/ -/ Petit FatFs module is an open source software to implement FAT file system to -/ small embedded systems. This is a free software and is opened for education, -/ research and commercial developments under license policy of following trems. -/ -/ Copyright (C) 2010, ChaN, all right reserved. -/ -/ * The Petit FatFs module is a free software and there is NO WARRANTY. -/ * No restriction on use. You can use, modify and redistribute it for -/ personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY. -/ * Redistributions of source code must retain the above copyright notice. -/ -/-----------------------------------------------------------------------------/ -/ Jun 15,'09 R0.01a First release. (Branched from FatFs R0.07b.) -/ -/ Dec 14,'09 R0.02 Added multiple code page support. -/ Added write funciton. -/ Changed stream read mode interface. -/ Dec 07,'10 R0.02a Added some configuration options. -/ Fixed fails to open objects with DBCS character. -/----------------------------------------------------------------------------*/ - -#include "pff.h" /* Petit FatFs configurations and declarations */ -#include "diskio.h" /* Declarations of low level disk I/O functions */ - - - -/*-------------------------------------------------------------------------- - - Module Private Definitions - ----------------------------------------------------------------------------*/ - - -#if _FS_FAT32 -#define LD_CLUST(dir) (((DWORD)LD_WORD(dir+DIR_FstClusHI)<<16) | LD_WORD(dir+DIR_FstClusLO)) -#else -#define LD_CLUST(dir) LD_WORD(dir+DIR_FstClusLO) -#endif - - -/*--------------------------------------------------------*/ -/* DBCS code ranges and SBCS extend char conversion table */ - -#if _CODE_PAGE == 932 /* Japanese Shift-JIS */ -#define _DF1S 0x81 /* DBC 1st byte range 1 start */ -#define _DF1E 0x9F /* DBC 1st byte range 1 end */ -#define _DF2S 0xE0 /* DBC 1st byte range 2 start */ -#define _DF2E 0xFC /* DBC 1st byte range 2 end */ -#define _DS1S 0x40 /* DBC 2nd byte range 1 start */ -#define _DS1E 0x7E /* DBC 2nd byte range 1 end */ -#define _DS2S 0x80 /* DBC 2nd byte range 2 start */ -#define _DS2E 0xFC /* DBC 2nd byte range 2 end */ - -#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x40 -#define _DS1E 0x7E -#define _DS2S 0x80 -#define _DS2E 0xFE - -#elif _CODE_PAGE == 949 /* Korean */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x41 -#define _DS1E 0x5A -#define _DS2S 0x61 -#define _DS2E 0x7A -#define _DS3S 0x81 -#define _DS3E 0xFE - -#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x40 -#define _DS1E 0x7E -#define _DS2S 0xA1 -#define _DS2E 0xFE - -#elif _CODE_PAGE == 437 /* U.S. (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 720 /* Arabic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 737 /* Greek (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \ - 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 775 /* Baltic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 850 /* Multilingual Latin 1 (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 852 /* Latin 2 (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF} - -#elif _CODE_PAGE == 855 /* Cyrillic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \ - 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \ - 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 857 /* Turkish (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 858 /* Multilingual Latin 1 + Euro (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 862 /* Hebrew (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 866 /* Russian (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 874 /* Thai (OEM, Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} - -#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ - 0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF} - -#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} - -#elif _CODE_PAGE == 1253 /* Greek (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \ - 0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF} - -#elif _CODE_PAGE == 1254 /* Turkish (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} - -#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1256 /* Arabic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1257 /* Baltic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} - -#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F} - -#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */ -#define _DF1S 0 - -#else -#error Unknown code page - -#endif - - - -/* Character code support macros */ - -#define IsUpper(c) (((c)>='A')&&((c)<='Z')) -#define IsLower(c) (((c)>='a')&&((c)<='z')) - -#if _DF1S /* DBCS configuration */ - -#ifdef _DF2S /* Two 1st byte areas */ -#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E)) -#else /* One 1st byte area */ -#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) -#endif - -#ifdef _DS3S /* Three 2nd byte areas */ -#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E)) -#else /* Two 2nd byte areas */ -#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E)) -#endif - -#else /* SBCS configuration */ - -#define IsDBCS1(c) 0 -#define IsDBCS2(c) 0 - -#endif /* _DF1S */ - - -/* FatFs refers the members in the FAT structures with byte offset instead -/ of structure member because there are incompatibility of the packing option -/ between various compilers. */ - -#define BS_jmpBoot 0 -#define BS_OEMName 3 -#define BPB_BytsPerSec 11 -#define BPB_SecPerClus 13 -#define BPB_RsvdSecCnt 14 -#define BPB_NumFATs 16 -#define BPB_RootEntCnt 17 -#define BPB_TotSec16 19 -#define BPB_Media 21 -#define BPB_FATSz16 22 -#define BPB_SecPerTrk 24 -#define BPB_NumHeads 26 -#define BPB_HiddSec 28 -#define BPB_TotSec32 32 -#define BS_55AA 510 - -#define BS_DrvNum 36 -#define BS_BootSig 38 -#define BS_VolID 39 -#define BS_VolLab 43 -#define BS_FilSysType 54 - -#define BPB_FATSz32 36 -#define BPB_ExtFlags 40 -#define BPB_FSVer 42 -#define BPB_RootClus 44 -#define BPB_FSInfo 48 -#define BPB_BkBootSec 50 -#define BS_DrvNum32 64 -#define BS_BootSig32 66 -#define BS_VolID32 67 -#define BS_VolLab32 71 -#define BS_FilSysType32 82 - -#define MBR_Table 446 - -#define DIR_Name 0 -#define DIR_Attr 11 -#define DIR_NTres 12 -#define DIR_CrtTime 14 -#define DIR_CrtDate 16 -#define DIR_FstClusHI 20 -#define DIR_WrtTime 22 -#define DIR_WrtDate 24 -#define DIR_FstClusLO 26 -#define DIR_FileSize 28 - - - -/*-------------------------------------------------------------------------- - - Private Functions - ----------------------------------------------------------------------------*/ - - -static -FATFS *FatFs; /* Pointer to the file system object (logical drive) */ - - -/* Fill memory */ -static -void mem_set (void* dst, int val, int cnt) { - char *d = (char*)dst; - while (cnt--) *d++ = (char)val; -} - -/* Compare memory to memory */ -static -int mem_cmp (const void* dst, const void* src, int cnt) { - const char *d = (const char *)dst, *s = (const char *)src; - int r = 0; - while (cnt-- && (r = *d++ - *s++) == 0) ; - return r; -} - - - -/*-----------------------------------------------------------------------*/ -/* FAT access - Read value of a FAT entry */ -/*-----------------------------------------------------------------------*/ - -static -CLUST get_fat ( /* 1:IO error, Else:Cluster status */ - CLUST clst /* Cluster# to get the link information */ -) -{ - WORD wc, bc, ofs; - BYTE buf[4]; - FATFS *fs = FatFs; - - - if (clst < 2 || clst >= fs->n_fatent) /* Range check */ - return 1; - - switch (fs->fs_type) { -#if _FS_FAT12 - case FS_FAT12 : - bc = (WORD)clst; bc += bc / 2; - ofs = bc % 512; bc /= 512; - if (ofs != 511) { - if (disk_readp(buf, fs->fatbase + bc, ofs, 2)) break; - } else { - if (disk_readp(buf, fs->fatbase + bc, 511, 1)) break; - if (disk_readp(buf+1, fs->fatbase + bc + 1, 0, 1)) break; - } - wc = LD_WORD(buf); - return (clst & 1) ? (wc >> 4) : (wc & 0xFFF); -#endif - case FS_FAT16 : - if (disk_readp(buf, fs->fatbase + clst / 256, (WORD)(((WORD)clst % 256) * 2), 2)) break; - return LD_WORD(buf); -#if _FS_FAT32 - case FS_FAT32 : - if (disk_readp(buf, fs->fatbase + clst / 128, (WORD)(((WORD)clst % 128) * 4), 4)) break; - return LD_DWORD(buf) & 0x0FFFFFFF; -#endif - } - - return 1; /* An error occured at the disk I/O layer */ -} - - - - -/*-----------------------------------------------------------------------*/ -/* Get sector# from cluster# */ -/*-----------------------------------------------------------------------*/ - -static -DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */ - CLUST clst /* Cluster# to be converted */ -) -{ - FATFS *fs = FatFs; - - - clst -= 2; - if (clst >= (fs->n_fatent - 2)) return 0; /* Invalid cluster# */ - return (DWORD)clst * fs->csize + fs->database; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Rewind directory index */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_rewind ( - DIR *dj /* Pointer to directory object */ -) -{ - CLUST clst; - FATFS *fs = FatFs; - - - dj->index = 0; - clst = dj->sclust; - if (clst == 1 || clst >= fs->n_fatent) /* Check start cluster range */ - return FR_DISK_ERR; - if (_FS_FAT32 && !clst && fs->fs_type == FS_FAT32) /* Replace cluster# 0 with root cluster# if in FAT32 */ - clst = (CLUST)fs->dirbase; - dj->clust = clst; /* Current cluster */ - dj->sect = clst ? clust2sect(clst) : fs->dirbase; /* Current sector */ - - return FR_OK; /* Seek succeeded */ -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Move directory index next */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_next ( /* FR_OK:Succeeded, FR_NO_FILE:End of table */ - DIR *dj /* Pointer to directory object */ -) -{ - CLUST clst; - WORD i; - FATFS *fs = FatFs; - - - i = dj->index + 1; - if (!i || !dj->sect) /* Report EOT when index has reached 65535 */ - return FR_NO_FILE; - - if (!(i % 16)) { /* Sector changed? */ - dj->sect++; /* Next sector */ - - if (dj->clust == 0) { /* Static table */ - if (i >= fs->n_rootdir) /* Report EOT when end of table */ - return FR_NO_FILE; - } - else { /* Dynamic table */ - if (((i / 16) & (fs->csize-1)) == 0) { /* Cluster changed? */ - clst = get_fat(dj->clust); /* Get next cluster */ - if (clst <= 1) return FR_DISK_ERR; - if (clst >= fs->n_fatent) /* When it reached end of dynamic table */ - return FR_NO_FILE; /* Report EOT */ - dj->clust = clst; /* Initialize data for new cluster */ - dj->sect = clust2sect(clst); - } - } - } - - dj->index = i; - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Find an object in the directory */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_find ( - DIR *dj, /* Pointer to the directory object linked to the file name */ - BYTE *dir /* 32-byte working buffer */ -) -{ - FRESULT res; - BYTE c; - - - res = dir_rewind(dj); /* Rewind directory object */ - if (res != FR_OK) return res; - - do { - res = disk_readp(dir, dj->sect, (WORD)((dj->index % 16) * 32), 32) /* Read an entry */ - ? FR_DISK_ERR : FR_OK; - if (res != FR_OK) break; - c = dir[DIR_Name]; /* First character */ - if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ - if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dj->fn, 11)) /* Is it a valid entry? */ - break; - res = dir_next(dj); /* Next entry */ - } while (res == FR_OK); - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read an object from the directory */ -/*-----------------------------------------------------------------------*/ -#if _USE_DIR -static -FRESULT dir_read ( - DIR *dj, /* Pointer to the directory object to store read object name */ - BYTE *dir /* 32-byte working buffer */ -) -{ - FRESULT res; - BYTE a, c; - - - res = FR_NO_FILE; - while (dj->sect) { - res = disk_readp(dir, dj->sect, (WORD)((dj->index % 16) * 32), 32) /* Read an entry */ - ? FR_DISK_ERR : FR_OK; - if (res != FR_OK) break; - c = dir[DIR_Name]; - if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ - a = dir[DIR_Attr] & AM_MASK; - if (c != 0xE5 && c != '.' && !(a & AM_VOL)) /* Is it a valid entry? */ - break; - res = dir_next(dj); /* Next entry */ - if (res != FR_OK) break; - } - - if (res != FR_OK) dj->sect = 0; - - return res; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Pick a segment and create the object name in directory form */ -/*-----------------------------------------------------------------------*/ - -#ifdef _EXCVT - static const BYTE cvt[] = _EXCVT; -#endif - -static -FRESULT create_name ( - DIR *dj, /* Pointer to the directory object */ - const char **path /* Pointer to pointer to the segment in the path string */ -) -{ - BYTE c, d, ni, si, i, *sfn; - const char *p; - - /* Create file name in directory form */ - sfn = dj->fn; - mem_set(sfn, ' ', 11); - si = i = 0; ni = 8; - p = *path; - for (;;) { - c = p[si++]; - if (c <= ' ' || c == '/') break; /* Break on end of segment */ - if (c == '.' || i >= ni) { - if (ni != 8 || c != '.') break; - i = 8; ni = 11; - continue; - } -#ifdef _EXCVT - if (c >= 0x80) /* To upper extended char (SBCS) */ - c = cvt[c - 0x80]; -#endif - if (IsDBCS1(c) && i < ni - 1) { /* DBC 1st byte? */ - d = p[si++]; /* Get 2nd byte */ - sfn[i++] = c; - sfn[i++] = d; - } else { /* Single byte code */ - if (IsLower(c)) c -= 0x20; /* toupper */ - sfn[i++] = c; - } - } - *path = &p[si]; /* Rerurn pointer to the next segment */ - - sfn[11] = (c <= ' ') ? 1 : 0; /* Set last segment flag if end of path */ - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Get file information from directory entry */ -/*-----------------------------------------------------------------------*/ -#if _USE_DIR -static -void get_fileinfo ( /* No return code */ - DIR *dj, /* Pointer to the directory object */ - BYTE *dir, /* 32-byte working buffer */ - FILINFO *fno /* Pointer to store the file information */ -) -{ - BYTE i, c; - char *p; - - - p = fno->fname; - if (dj->sect) { - for (i = 0; i < 8; i++) { /* Copy file name body */ - c = dir[i]; - if (c == ' ') break; - if (c == 0x05) c = 0xE5; - *p++ = c; - } - if (dir[8] != ' ') { /* Copy file name extension */ - *p++ = '.'; - for (i = 8; i < 11; i++) { - c = dir[i]; - if (c == ' ') break; - *p++ = c; - } - } - fno->fattrib = dir[DIR_Attr]; /* Attribute */ - fno->fsize = LD_DWORD(dir+DIR_FileSize); /* Size */ - fno->fdate = LD_WORD(dir+DIR_WrtDate); /* Date */ - fno->ftime = LD_WORD(dir+DIR_WrtTime); /* Time */ - } - *p = 0; -} -#endif /* _USE_DIR */ - - - -/*-----------------------------------------------------------------------*/ -/* Follow a file path */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ - DIR *dj, /* Directory object to return last directory and found object */ - BYTE *dir, /* 32-byte working buffer */ - const char *path /* Full-path string to find a file or directory */ -) -{ - FRESULT res; - - - while (*path == ' ') path++; /* Skip leading spaces */ - if (*path == '/') path++; /* Strip heading separator */ - dj->sclust = 0; /* Set start directory (always root dir) */ - - if ((BYTE)*path <= ' ') { /* Null path means the root directory */ - res = dir_rewind(dj); - dir[0] = 0; - - } else { /* Follow path */ - for (;;) { - res = create_name(dj, &path); /* Get a segment */ - if (res != FR_OK) break; - res = dir_find(dj, dir); /* Find it */ - if (res != FR_OK) { /* Could not find the object */ - if (res == FR_NO_FILE && !*(dj->fn+11)) - res = FR_NO_PATH; - break; - } - if (*(dj->fn+11)) break; /* Last segment match. Function completed. */ - if (!(dir[DIR_Attr] & AM_DIR)) { /* Cannot follow because it is a file */ - res = FR_NO_PATH; break; - } - dj->sclust = LD_CLUST(dir); - } - } - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Check a sector if it is an FAT boot record */ -/*-----------------------------------------------------------------------*/ - -static -BYTE check_fs ( /* 0:The FAT boot record, 1:Valid boot record but not an FAT, 2:Not a boot record, 3:Error */ - BYTE *buf, /* Working buffer */ - DWORD sect /* Sector# (lba) to check if it is an FAT boot record or not */ -) -{ - if (disk_readp(buf, sect, 510, 2)) /* Read the boot sector */ - return 3; - if (LD_WORD(buf) != 0xAA55) /* Check record signature */ - return 2; - - if (!disk_readp(buf, sect, BS_FilSysType, 2) && LD_WORD(buf) == 0x4146) /* Check FAT12/16 */ - return 0; - if (_FS_FAT32 && !disk_readp(buf, sect, BS_FilSysType32, 2) && LD_WORD(buf) == 0x4146) /* Check FAT32 */ - return 0; - return 1; -} - - - - -/*-------------------------------------------------------------------------- - - Public Functions - ---------------------------------------------------------------------------*/ - - - -/*-----------------------------------------------------------------------*/ -/* Mount/Unmount a Locical Drive */ -/*-----------------------------------------------------------------------*/ - -FRESULT pf_mount ( - FATFS *fs /* Pointer to new file system object (NULL: Unmount) */ -) -{ - BYTE fmt, buf[36]; - DWORD bsect, fsize, tsect, mclst; - - - FatFs = 0; - if (!fs) return FR_OK; /* Unregister fs object */ - - if (disk_initialize() & STA_NOINIT) /* Check if the drive is ready or not */ - return FR_NOT_READY; - - /* Search FAT partition on the drive */ - bsect = 0; - fmt = check_fs(buf, bsect); /* Check sector 0 as an SFD format */ - if (fmt == 1) { /* Not an FAT boot record, it may be FDISK format */ - /* Check a partition listed in top of the partition table */ - if (disk_readp(buf, bsect, MBR_Table, 16)) { /* 1st partition entry */ - fmt = 3; - } else { - if (buf[4]) { /* Is the partition existing? */ - bsect = LD_DWORD(&buf[8]); /* Partition offset in LBA */ - fmt = check_fs(buf, bsect); /* Check the partition */ - } - } - } - if (fmt == 3) return FR_DISK_ERR; - if (fmt) return FR_NO_FILESYSTEM; /* No valid FAT patition is found */ - - /* Initialize the file system object */ - if (disk_readp(buf, bsect, 13, sizeof(buf))) return FR_DISK_ERR; - - fsize = LD_WORD(buf+BPB_FATSz16-13); /* Number of sectors per FAT */ - if (!fsize) fsize = LD_DWORD(buf+BPB_FATSz32-13); - - fsize *= buf[BPB_NumFATs-13]; /* Number of sectors in FAT area */ - fs->fatbase = bsect + LD_WORD(buf+BPB_RsvdSecCnt-13); /* FAT start sector (lba) */ - fs->csize = buf[BPB_SecPerClus-13]; /* Number of sectors per cluster */ - fs->n_rootdir = LD_WORD(buf+BPB_RootEntCnt-13); /* Nmuber of root directory entries */ - tsect = LD_WORD(buf+BPB_TotSec16-13); /* Number of sectors on the file system */ - if (!tsect) tsect = LD_DWORD(buf+BPB_TotSec32-13); - mclst = (tsect /* Last cluster# + 1 */ - - LD_WORD(buf+BPB_RsvdSecCnt-13) - fsize - fs->n_rootdir / 16 - ) / fs->csize + 2; - fs->n_fatent = (CLUST)mclst; - - fmt = FS_FAT16; /* Determine the FAT sub type */ - if (mclst < 0xFF7) /* Number of clusters < 0xFF5 */ -#if _FS_FAT12 - fmt = FS_FAT12; -#else - return FR_NO_FILESYSTEM; -#endif - if (mclst >= 0xFFF7) /* Number of clusters >= 0xFFF5 */ -#if _FS_FAT32 - fmt = FS_FAT32; -#else - return FR_NO_FILESYSTEM; -#endif - - fs->fs_type = fmt; /* FAT sub-type */ - if (_FS_FAT32 && fmt == FS_FAT32) - fs->dirbase = LD_DWORD(buf+(BPB_RootClus-13)); /* Root directory start cluster */ - else - fs->dirbase = fs->fatbase + fsize; /* Root directory start sector (lba) */ - fs->database = fs->fatbase + fsize + fs->n_rootdir / 16; /* Data start sector (lba) */ - - fs->flag = 0; - FatFs = fs; - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Open or Create a File */ -/*-----------------------------------------------------------------------*/ - -FRESULT pf_open ( - const char *path /* Pointer to the file name */ -) -{ - FRESULT res; - DIR dj; - BYTE sp[12], dir[32]; - FATFS *fs = FatFs; - - - if (!fs) /* Check file system */ - return FR_NOT_ENABLED; - - fs->flag = 0; - dj.fn = sp; - res = follow_path(&dj, dir, path); /* Follow the file path */ - if (res != FR_OK) return res; /* Follow failed */ - if (!dir[0] || (dir[DIR_Attr] & AM_DIR)) /* It is a directory */ - return FR_NO_FILE; - - fs->org_clust = LD_CLUST(dir); /* File start cluster */ - fs->fsize = LD_DWORD(dir+DIR_FileSize); /* File size */ - fs->fptr = 0; /* File pointer */ - fs->flag = FA_OPENED; - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read File */ -/*-----------------------------------------------------------------------*/ -#if _USE_READ - -FRESULT pf_read ( - void* buff, /* Pointer to the read buffer (NULL:Forward data to the stream)*/ - WORD btr, /* Number of bytes to read */ - WORD* br /* Pointer to number of bytes read */ -) -{ - DRESULT dr; - CLUST clst; - DWORD sect, remain; - WORD rcnt; - BYTE cs, *rbuff = buff; - FATFS *fs = FatFs; - - - *br = 0; - if (!fs) return FR_NOT_ENABLED; /* Check file system */ - if (!(fs->flag & FA_OPENED)) /* Check if opened */ - return FR_NOT_OPENED; - - remain = fs->fsize - fs->fptr; - if (btr > remain) btr = (WORD)remain; /* Truncate btr by remaining bytes */ - - while (btr) { /* Repeat until all data transferred */ - if ((fs->fptr % 512) == 0) { /* On the sector boundary? */ - cs = (BYTE)(fs->fptr / 512 & (fs->csize - 1)); /* Sector offset in the cluster */ - if (!cs) { /* On the cluster boundary? */ - clst = (fs->fptr == 0) ? /* On the top of the file? */ - fs->org_clust : get_fat(fs->curr_clust); - if (clst <= 1) goto fr_abort; - fs->curr_clust = clst; /* Update current cluster */ - } - sect = clust2sect(fs->curr_clust); /* Get current sector */ - if (!sect) goto fr_abort; - fs->dsect = sect + cs; - } - rcnt = (WORD)(512 - (fs->fptr % 512)); /* Get partial sector data from sector buffer */ - if (rcnt > btr) rcnt = btr; - dr = disk_readp(!buff ? 0 : rbuff, fs->dsect, (WORD)(fs->fptr % 512), rcnt); - if (dr) goto fr_abort; - fs->fptr += rcnt; rbuff += rcnt; /* Update pointers and counters */ - btr -= rcnt; *br += rcnt; - } - - return FR_OK; - -fr_abort: - fs->flag = 0; - return FR_DISK_ERR; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Write File */ -/*-----------------------------------------------------------------------*/ -#if _USE_WRITE - -FRESULT pf_write ( - const void* buff, /* Pointer to the data to be written */ - WORD btw, /* Number of bytes to write (0:Finalize the current write operation) */ - WORD* bw /* Pointer to number of bytes written */ -) -{ - CLUST clst; - DWORD sect, remain; - const BYTE *p = buff; - BYTE cs; - WORD wcnt; - FATFS *fs = FatFs; - - - *bw = 0; - if (!fs) return FR_NOT_ENABLED; /* Check file system */ - if (!(fs->flag & FA_OPENED)) /* Check if opened */ - return FR_NOT_OPENED; - - if (!btw) { /* Finalize request */ - if ((fs->flag & FA__WIP) && disk_writep(0, 0)) goto fw_abort; - fs->flag &= ~FA__WIP; - return FR_OK; - } else { /* Write data request */ - if (!(fs->flag & FA__WIP)) /* Round-down fptr to the sector boundary */ - fs->fptr &= 0xFFFFFE00; - } - remain = fs->fsize - fs->fptr; - if (btw > remain) btw = (WORD)remain; /* Truncate btw by remaining bytes */ - - while (btw) { /* Repeat until all data transferred */ - if (((WORD)fs->fptr % 512) == 0) { /* On the sector boundary? */ - cs = (BYTE)(fs->fptr / 512 & (fs->csize - 1)); /* Sector offset in the cluster */ - if (!cs) { /* On the cluster boundary? */ - clst = (fs->fptr == 0) ? /* On the top of the file? */ - fs->org_clust : get_fat(fs->curr_clust); - if (clst <= 1) goto fw_abort; - fs->curr_clust = clst; /* Update current cluster */ - } - sect = clust2sect(fs->curr_clust); /* Get current sector */ - if (!sect) goto fw_abort; - fs->dsect = sect + cs; - if (disk_writep(0, fs->dsect)) goto fw_abort; /* Initiate a sector write operation */ - fs->flag |= FA__WIP; - } - wcnt = 512 - ((WORD)fs->fptr % 512); /* Number of bytes to write to the sector */ - if (wcnt > btw) wcnt = btw; - if (disk_writep(p, wcnt)) goto fw_abort; /* Send data to the sector */ - fs->fptr += wcnt; p += wcnt; /* Update pointers and counters */ - btw -= wcnt; *bw += wcnt; - if (((WORD)fs->fptr % 512) == 0) { - if (disk_writep(0, 0)) goto fw_abort; /* Finalize the currtent secter write operation */ - fs->flag &= ~FA__WIP; - } - } - - return FR_OK; - -fw_abort: - fs->flag = 0; - return FR_DISK_ERR; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Seek File R/W Pointer */ -/*-----------------------------------------------------------------------*/ -#if _USE_LSEEK - -FRESULT pf_lseek ( - DWORD ofs /* File pointer from top of file */ -) -{ - CLUST clst; - DWORD bcs, sect, ifptr; - FATFS *fs = FatFs; - - - if (!fs) return FR_NOT_ENABLED; /* Check file system */ - if (!(fs->flag & FA_OPENED)) /* Check if opened */ - return FR_NOT_OPENED; - - if (ofs > fs->fsize) ofs = fs->fsize; /* Clip offset with the file size */ - ifptr = fs->fptr; - fs->fptr = 0; - if (ofs > 0) { - bcs = (DWORD)fs->csize * 512; /* Cluster size (byte) */ - if (ifptr > 0 && - (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */ - fs->fptr = (ifptr - 1) & ~(bcs - 1); /* start from the current cluster */ - ofs -= fs->fptr; - clst = fs->curr_clust; - } else { /* When seek to back cluster, */ - clst = fs->org_clust; /* start from the first cluster */ - fs->curr_clust = clst; - } - while (ofs > bcs) { /* Cluster following loop */ - clst = get_fat(clst); /* Follow cluster chain */ - if (clst <= 1 || clst >= fs->n_fatent) goto fe_abort; - fs->curr_clust = clst; - fs->fptr += bcs; - ofs -= bcs; - } - fs->fptr += ofs; - sect = clust2sect(clst); /* Current sector */ - if (!sect) goto fe_abort; - fs->dsect = sect + (fs->fptr / 512 & (fs->csize - 1)); - } - - return FR_OK; - -fe_abort: - fs->flag = 0; - return FR_DISK_ERR; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Create a Directroy Object */ -/*-----------------------------------------------------------------------*/ -#if _USE_DIR - -FRESULT pf_opendir ( - DIR *dj, /* Pointer to directory object to create */ - const char *path /* Pointer to the directory path */ -) -{ - FRESULT res; - BYTE sp[12], dir[32]; - FATFS *fs = FatFs; - - - if (!fs) { /* Check file system */ - res = FR_NOT_ENABLED; - } else { - dj->fn = sp; - res = follow_path(dj, dir, path); /* Follow the path to the directory */ - if (res == FR_OK) { /* Follow completed */ - if (dir[0]) { /* It is not the root dir */ - if (dir[DIR_Attr] & AM_DIR) /* The object is a directory */ - dj->sclust = LD_CLUST(dir); - else /* The object is not a directory */ - res = FR_NO_PATH; - } - if (res == FR_OK) - res = dir_rewind(dj); /* Rewind dir */ - } - if (res == FR_NO_FILE) res = FR_NO_PATH; - } - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read Directory Entry in Sequense */ -/*-----------------------------------------------------------------------*/ - -FRESULT pf_readdir ( - DIR *dj, /* Pointer to the open directory object */ - FILINFO *fno /* Pointer to file information to return */ -) -{ - FRESULT res; - BYTE sp[12], dir[32]; - FATFS *fs = FatFs; - - - if (!fs) { /* Check file system */ - res = FR_NOT_ENABLED; - } else { - dj->fn = sp; - if (!fno) { - res = dir_rewind(dj); - } else { - res = dir_read(dj, dir); - if (res == FR_NO_FILE) { - dj->sect = 0; - res = FR_OK; - } - if (res == FR_OK) { /* A valid entry is found */ - get_fileinfo(dj, dir, fno); /* Get the object information */ - res = dir_next(dj); /* Increment index for next */ - if (res == FR_NO_FILE) { - dj->sect = 0; - res = FR_OK; - } - } - } - } - - return res; -} - -#endif /* _USE_DIR */ - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h deleted file mode 100644 index 82f8832c7..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h +++ /dev/null @@ -1,193 +0,0 @@ -/*---------------------------------------------------------------------------/ -/ Petit FatFs - FAT file system module include file R0.02a (C)ChaN, 2010 -/----------------------------------------------------------------------------/ -/ Petit FatFs module is an open source software to implement FAT file system to -/ small embedded systems. This is a free software and is opened for education, -/ research and commercial developments under license policy of following trems. -/ -/ Copyright (C) 2010, ChaN, all right reserved. -/ -/ * The Petit FatFs module is a free software and there is NO WARRANTY. -/ * No restriction on use. You can use, modify and redistribute it for -/ personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY. -/ * Redistributions of source code must retain the above copyright notice. -/ -/----------------------------------------------------------------------------*/ - -#include "integer.h" - -/*---------------------------------------------------------------------------/ -/ Petit FatFs Configuration Options -/ -/ CAUTION! Do not forget to make clean the project after any changes to -/ the configuration options. -/ -/----------------------------------------------------------------------------*/ -#ifndef _FATFS -#define _FATFS - -#define _USE_READ 1 /* 1:Enable pf_read() */ - -#define _USE_DIR 0 /* 1:Enable pf_opendir() and pf_readdir() */ - -#define _USE_LSEEK 0 /* 1:Enable pf_lseek() */ - -#define _USE_WRITE 0 /* 1:Enable pf_write() */ - -#define _FS_FAT12 1 /* 1:Enable FAT12 support */ -#define _FS_FAT32 0 /* 1:Enable FAT32 support */ - - -#define _CODE_PAGE 1 -/* Defines which code page is used for path name. Supported code pages are: -/ 932, 936, 949, 950, 437, 720, 737, 775, 850, 852, 855, 857, 858, 862, 866, -/ 874, 1250, 1251, 1252, 1253, 1254, 1255, 1257, 1258 and 1 (ASCII only). -/ SBCS code pages except for 1 requiers a case conversion table. This -/ might occupy 128 bytes on the RAM on some platforms, e.g. avr-gcc. */ - - -#define _WORD_ACCESS 0 -/* The _WORD_ACCESS option defines which access method is used to the word -/ data in the FAT structure. -/ -/ 0: Byte-by-byte access. Always compatible with all platforms. -/ 1: Word access. Do not choose this unless following condition is met. -/ -/ When the byte order on the memory is big-endian or address miss-aligned -/ word access results incorrect behavior, the _WORD_ACCESS must be set to 0. -/ If it is not the case, the value can also be set to 1 to improve the -/ performance and code efficiency. */ - - -/* End of configuration options. Do not change followings without care. */ -/*--------------------------------------------------------------------------*/ - - - -#if _FS_FAT32 -#define CLUST DWORD -#else -#define CLUST WORD -#endif - - -/* File system object structure */ - -typedef struct { - BYTE fs_type; /* FAT sub type */ - BYTE flag; /* File status flags */ - BYTE csize; /* Number of sectors per cluster */ - BYTE pad1; - WORD n_rootdir; /* Number of root directory entries (0 on FAT32) */ - CLUST n_fatent; /* Number of FAT entries (= number of clusters + 2) */ - DWORD fatbase; /* FAT start sector */ - DWORD dirbase; /* Root directory start sector (Cluster# on FAT32) */ - DWORD database; /* Data start sector */ - DWORD fptr; /* File R/W pointer */ - DWORD fsize; /* File size */ - CLUST org_clust; /* File start cluster */ - CLUST curr_clust; /* File current cluster */ - DWORD dsect; /* File current data sector */ -} FATFS; - - - -/* Directory object structure */ - -typedef struct { - WORD index; /* Current read/write index number */ - BYTE* fn; /* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */ - CLUST sclust; /* Table start cluster (0:Static table) */ - CLUST clust; /* Current cluster */ - DWORD sect; /* Current sector */ -} DIR; - - - -/* File status structure */ - -typedef struct { - DWORD fsize; /* File size */ - WORD fdate; /* Last modified date */ - WORD ftime; /* Last modified time */ - BYTE fattrib; /* Attribute */ - char fname[13]; /* File name */ -} FILINFO; - - - -/* File function return code (FRESULT) */ - -typedef enum { - FR_OK = 0, /* 0 */ - FR_DISK_ERR, /* 1 */ - FR_NOT_READY, /* 2 */ - FR_NO_FILE, /* 3 */ - FR_NO_PATH, /* 4 */ - FR_NOT_OPENED, /* 5 */ - FR_NOT_ENABLED, /* 6 */ - FR_NO_FILESYSTEM /* 7 */ -} FRESULT; - - - -/*--------------------------------------------------------------*/ -/* Petit FatFs module application interface */ - -FRESULT pf_mount (FATFS*); /* Mount/Unmount a logical drive */ -FRESULT pf_open (const char*); /* Open a file */ -FRESULT pf_read (void*, WORD, WORD*); /* Read data from the open file */ -FRESULT pf_write (const void*, WORD, WORD*); /* Write data to the open file */ -FRESULT pf_lseek (DWORD); /* Move file pointer of the open file */ -FRESULT pf_opendir (DIR*, const char*); /* Open a directory */ -FRESULT pf_readdir (DIR*, FILINFO*); /* Read a directory item from the open directory */ - - - -/*--------------------------------------------------------------*/ -/* Flags and offset address */ - -/* File status flag (FATFS.flag) */ - -#define FA_OPENED 0x01 -#define FA_WPRT 0x02 -#define FA__WIP 0x40 - - -/* FAT sub type (FATFS.fs_type) */ - -#define FS_FAT12 1 -#define FS_FAT16 2 -#define FS_FAT32 3 - - -/* File attribute bits for directory entry */ - -#define AM_RDO 0x01 /* Read only */ -#define AM_HID 0x02 /* Hidden */ -#define AM_SYS 0x04 /* System */ -#define AM_VOL 0x08 /* Volume label */ -#define AM_LFN 0x0F /* LFN entry */ -#define AM_DIR 0x10 /* Directory */ -#define AM_ARC 0x20 /* Archive */ -#define AM_MASK 0x3F /* Mask of defined bits */ - - -/*--------------------------------*/ -/* Multi-byte word access macros */ - -#if _WORD_ACCESS == 1 /* Enable word access to the FAT structure */ -#define LD_WORD(ptr) (WORD)(*(WORD*)(BYTE*)(ptr)) -#define LD_DWORD(ptr) (DWORD)(*(DWORD*)(BYTE*)(ptr)) -#define ST_WORD(ptr,val) *(WORD*)(BYTE*)(ptr)=(WORD)(val) -#define ST_DWORD(ptr,val) *(DWORD*)(BYTE*)(ptr)=(DWORD)(val) -#else /* Use byte-by-byte access to the FAT structure */ -#define LD_WORD(ptr) (WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr)) -#define LD_DWORD(ptr) (DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr)) -#define ST_WORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8) -#define ST_DWORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24) -#endif - - -#endif /* _FATFS */ - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c b/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c deleted file mode 100644 index 917523669..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "ProgrammerConfig.h" - -struct -{ - uint16_t SigBytes[4]; - bool EnforceSigBytes; - - uint32_t ProgrammingSpeed; -} ProgrammerConfig; - -bool ProgrammerConfig_ProcessConfiguration(void) -{ - memset(&ProgrammerConfig, 0x00, sizeof(ProgrammerConfig)); - - if (!(pf_open("CONF.txt") == FR_OK)) - { - puts(" >> ERROR: CONF.txt File Not Found.\r\n"); - return false; - } - - char LineBuff[100]; - char* CurrentLine; - - do - { - CurrentLine = fgets(LineBuff, sizeof(LineBuff), &DiskStream); - - if (CurrentLine) - { - sscanf(CurrentLine, "SIGNATURE = %02x %02x %02x %02x", &ProgrammerConfig.SigBytes[0], - &ProgrammerConfig.SigBytes[1], - &ProgrammerConfig.SigBytes[2], - &ProgrammerConfig.SigBytes[3]); - - sscanf(CurrentLine, "SPEED = %08lu", &ProgrammerConfig.ProgrammingSpeed); - } - } while (CurrentLine); - - printf(" >> *** Configuration: ***\r\n"); - printf(" >> Device Signature: 0x%02x 0x%02x 0x%02x 0x%02x\r\n", ProgrammerConfig.SigBytes[0], - ProgrammerConfig.SigBytes[1], - ProgrammerConfig.SigBytes[2], - ProgrammerConfig.SigBytes[3]); - printf(" >> Programming Speed: %lu Hz\r\n", ProgrammerConfig.ProgrammingSpeed); - - return true; -} - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c deleted file mode 100644 index 2d000b8ea..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage - * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, - * which wrap around standard SCSI device commands for controlling the actual storage medium. - */ - -#define INCLUDE_FROM_SCSI_C -#include "SCSI.h" - -#if defined(USB_CAN_BE_DEVICE) -/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's - * features and capabilities. - */ -static const SCSI_Inquiry_Response_t InquiryData = - { - .DeviceType = DEVICE_TYPE_BLOCK, - .PeripheralQualifier = 0, - - .Removable = true, - - .Version = 0, - - .ResponseDataFormat = 2, - .NormACA = false, - .TrmTsk = false, - .AERC = false, - - .AdditionalLength = 0x1F, - - .SoftReset = false, - .CmdQue = false, - .Linked = false, - .Sync = false, - .WideBus16Bit = false, - .WideBus32Bit = false, - .RelAddr = false, - - .VendorID = "LUFA", - .ProductID = "Dataflash Disk", - .RevisionID = {'0','.','0','0'}, - }; - -/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE - * command is issued. This gives information on exactly why the last command failed to complete. - */ -static SCSI_Request_Sense_Response_t SenseData = - { - .ResponseCode = 0x70, - .AdditionalLength = 0x0A, - }; - - -/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches - * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns - * a command failure due to a ILLEGAL REQUEST. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise - */ -bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - bool CommandSuccess = false; - - /* Run the appropriate SCSI command hander function based on the passed command */ - switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) - { - case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); - break; - case SCSI_CMD_REQUEST_SENSE: - CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); - break; - case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); - break; - case SCSI_CMD_SEND_DIAGNOSTIC: - CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); - break; - case SCSI_CMD_WRITE_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE); - break; - case SCSI_CMD_READ_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); - break; - case SCSI_CMD_MODE_SENSE_6: - CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); - break; - case SCSI_CMD_TEST_UNIT_READY: - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - case SCSI_CMD_VERIFY_10: - /* These commands should just succeed, no handling required */ - CommandSuccess = true; - MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - break; - default: - /* Update the SENSE key to reflect the invalid command */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_COMMAND, - SCSI_ASENSEQ_NO_QUALIFIER); - break; - } - - /* Check if command was successfully processed */ - if (CommandSuccess) - { - SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, - SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - - return true; - } - - return false; -} - -/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features - * and capabilities to the host. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]); - uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData)); - - /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */ - if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) || - MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]) - { - /* Optional but unsupported bits set - update the SENSE key and fail the request */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_FIELD_IN_CDB, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL); - - /* Pad out remaining bytes with 0x00 */ - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, - * including the error code and additional error information so that the host can determine why a command failed to complete. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; - uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData)); - - Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL); - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity - * on the selected Logical Unit (drive), as a number of OS-sized blocks. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint32_t LastBlockAddressInLUN = (VIRTUAL_MEMORY_BLOCKS - 1); - uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE; - - Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL); - Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - - return true; -} - -/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the - * board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is - * supported. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - /* Check to see if the SELF TEST bit is not set */ - if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2))) - { - /* Only self-test supported - update SENSE key and fail the command */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_FIELD_IN_CDB, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Check to see if all attached Dataflash ICs are functional */ - if (!(DataflashManager_CheckDataflashOperation())) - { - /* Update SENSE key with a hardware error condition and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, - SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - - return true; -} - -/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address - * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual - * reading and writing of the data. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead) -{ - uint32_t BlockAddress; - uint16_t TotalBlocks; - - /* Check if the disk is write protected or not */ - if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) - { - /* Block address is invalid, update SENSE key and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, - SCSI_ASENSE_WRITE_PROTECTED, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ - BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); - - /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ - TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - - /* Check if the block address is outside the maximum allowable value for the LUN */ - if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS) - { - /* Block address is invalid, update SENSE key and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ - if (IsDataRead == DATA_READ) - DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); - else - DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - - return true; -} - -/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about - * the SCSI device, as well as the device's Write Protect status. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - /* Send an empty header response with the Write Protect flag status */ - Endpoint_Write_8(0x00); - Endpoint_Write_8(0x00); - Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00); - Endpoint_Write_8(0x00); - Endpoint_ClearIN(); - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; - - return true; -} -#endif diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h deleted file mode 100644 index a0940a796..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for SCSI.c. - */ - -#ifndef _SCSI_H_ -#define _SCSI_H_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/pgmspace.h> - - #include <LUFA/Drivers/USB/USB.h> - - #include "../StandaloneProgrammer.h" - #include "../Descriptors.h" - #include "DataflashManager.h" - - /* Macros: */ - /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This - * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about - * the last command failure) in a quick and easy manner. - * - * \param[in] Key New SCSI sense key to set the sense code to - * \param[in] Acode New SCSI additional sense key to set the additional sense code to - * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to - */ - #define SCSI_SET_SENSE(Key, Acode, Aqual) MACROS{ SenseData.SenseKey = (Key); \ - SenseData.AdditionalSenseCode = (Acode); \ - SenseData.AdditionalSenseQualifier = (Aqual); }MACROE - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */ - #define DATA_READ true - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */ - #define DATA_WRITE false - - /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ - #define DEVICE_TYPE_BLOCK 0x00 - - /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ - #define DEVICE_TYPE_CDROM 0x05 - - /* Function Prototypes: */ - #if defined(USB_CAN_BE_DEVICE) - bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - - #if defined(INCLUDE_FROM_SCSI_C) - static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead); - static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - #endif - #endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Standalone Programmer.inf b/Projects/Incomplete/StandaloneProgrammer/Standalone Programmer.inf deleted file mode 100644 index 8472fefde..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Standalone Programmer.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2063&MI_00 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2063&MI_00 - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="CDC_vista" -DRIVERFILENAME ="usbser" -MFGNAME="CCS, Inc." -INSTDISK="LUFA Benito Programmer Driver Installer" -DESCRIPTION="Communications Port" -SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file diff --git a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c b/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c deleted file mode 100644 index 86318e9cb..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the Standalone Programmer project. This file contains the main tasks of - * the project and is responsible for the initial application hardware configuration. - */ - -#define INCLUDE_FROM_STANDALONEPROG_C -#include "StandaloneProgrammer.h" - -/** Standard file stream for the currently open file on the disk. */ -FILE DiskStream = FDEV_SETUP_STREAM(NULL, Disk_getchar, _FDEV_SETUP_READ); - -/** Petite FAT Fs structure to hold the internal state of the FAT driver for the Dataflash contents. */ -FATFS DiskFATState; - -/** Stream character fetching routine for the FAT driver so that characters from the currently open file can be - * read in sequence when applied to a stdio stream. - */ -static int Disk_getchar(FILE* Stream) -{ - char ReadByte; - WORD ByteWasRead; - - if (pf_read(&ReadByte, 1, &ByteWasRead) != FR_OK) - return _FDEV_ERR; - - return (ByteWasRead ? ReadByte : _FDEV_EOF); -} - -#if defined(USB_CAN_BE_BOTH) -/** Event to handle mode changes in the library, to clear the FAT library's drive state structure when transitioning - * between modes. This ensures that the library always works with current disk data. - */ -void EVENT_USB_UIDChange(void) -{ - pf_mount(&DiskFATState); -} -#endif - -/** Task to determine if the user is wishes to start the programming sequence, and if so executes the - * required functions to program the attached target (if any) with the files loaded to the Dataflash. - */ -void Programmer_Task(void) -{ - static bool HasAttempted = false; - - if (Buttons_GetStatus() & BUTTONS_BUTTON1) - { - if (!(HasAttempted)) - HasAttempted = true; - else - return; - - puts("==== PROGRAMMING CYCLE STARTED ====\r\n"); - - #if defined(USB_CAN_BE_BOTH) - printf("Using %s Drive...\r\n", (USB_CurrentMode == USB_MODE_Host) ? "External" : "Internal"); - #endif - - puts("Reading Configuration File...\r\n"); - if (!(ProgrammerConfig_ProcessConfiguration())) - goto EndOfProgCycle; - - EndOfProgCycle: - puts("==== PROGRAMMING CYCLE FINISHED ====\r\n"); - } - else - { - HasAttempted = false; - } -} - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - sei(); - - for (;;) - { - Programmer_Task(); - - #if defined(USB_CAN_BE_HOST) - if (USB_CurrentMode == USB_MODE_Host) - DiskHost_USBTask(); - #endif - - #if defined(USB_CAN_BE_DEVICE) - if (USB_CurrentMode == USB_MODE_Device) - DiskDevice_USBTask(); - #endif - - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - #if defined(USB_CAN_BE_BOTH) - USB_Init(USB_MODE_UID); - #else - USB_Init(); - #endif - - LEDs_Init(); - SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); - Dataflash_Init(); - Buttons_Init(); - Serial_Init(9600, true); - - /* Create a stdio stream for the serial port for stdin and stdout */ - Serial_CreateStream(NULL); - - #if defined(USB_CAN_BE_DEVICE) - /* Check if the Dataflash is working, abort if not */ - if (!(DataflashManager_CheckDataflashOperation())) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - for(;;); - } - - /* Clear Dataflash sector protections, if enabled */ - DataflashManager_ResetDataflashProtections(); - #endif -} - diff --git a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h b/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h deleted file mode 100644 index 65edc49f5..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for StandaloneProgrammer.c. - */ - -#ifndef _STANDALONE_PROG_H_ -#define _STANDALONE_PROG_H_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/wdt.h> - #include <avr/power.h> - #include <avr/interrupt.h> - #include <stdio.h> - - #include "DiskDevice.h" - #include "DiskHost.h" - - #include "Lib/SCSI.h" - #include "Lib/DataflashManager.h" - #include "Lib/ProgrammerConfig.h" - #include "Lib/PetiteFATFs/pff.h" - - #include <LUFA/Version.h> - #include <LUFA/Drivers/Board/Buttons.h> - #include <LUFA/Drivers/Peripheral/Serial.h> - - /* Macros: */ - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ - #define LEDMASK_USB_NOTREADY LEDS_LED1 - - /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ - #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ - #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ - #define LEDMASK_USB_BUSY LEDS_LED2 - - /* External Variables: */ - extern FILE DiskStream; - extern FATFS DiskFATState; - - /* Function Prototypes: */ - #if defined(INCLUDE_FROM_STANDALONEPROG_C) - static int Disk_getchar(FILE* Stream); - #endif - - void EVENT_USB_UIDChange(void); - - void SetupHardware(void); - void Programmer_Task(void); - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/makefile b/Projects/Incomplete/StandaloneProgrammer/makefile deleted file mode 100644 index bc96281bd..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/makefile +++ /dev/null @@ -1,738 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# >> Modified for use with the LUFA project. << -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# Dean Camera -# Opendous Inc. -# Denver Gingerich -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make doxygen = Generate DoxyGen documentation for the project (must have -# DoxyGen installed) -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# MCU name -MCU = at90usb1287 - - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - - -# Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called -# "Board" inside the application directory. -BOARD = USBKEY - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 8000000 - - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Target file name (without extension). -TARGET = StandaloneProgrammer - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# Path to the LUFA library -LUFA_PATH = ../../.. - - -# LUFA library compile-time options and predefined tokens -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D HOST_STATE_AS_GPIOR=1 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - - -# Create the LUFA source path variables by including the LUFA root makefile -include $(LUFA_PATH)/LUFA/makefile - - -# List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - Descriptors.c \ - DiskHost.c \ - DiskDevice.c \ - Lib/SCSI.c \ - Lib/DataflashManager.c \ - Lib/ProgrammerConfig.c \ - Lib/PetiteFATFs/diskio.c \ - Lib/PetiteFATFs/pff.c \ - $(LUFA_SRC_USB) \ - $(LUFA_SRC_USBCLASS) \ - $(LUFA_SRC_SERIAL) - - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=c99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL -CDEFS += -DF_USB=$(F_USB)UL -CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) -CDEFS += $(LUFA_OPTS) - - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) -ADEFS += -DF_USB=$(F_USB)UL -ADEFS += -DBOARD=BOARD_$(BOARD) -ADEFS += $(LUFA_OPTS) - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -CPPDEFS += -DF_USB=$(F_USB)UL -CPPDEFS += -DBOARD=BOARD_$(BOARD) -CPPDEFS += $(LUFA_OPTS) -#CPPDEFS += -D__STDC_LIMIT_MACROS -#CPPDEFS += -D__STDC_CONSTANT_MACROS - - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fno-inline-small-functions -CFLAGS += -fpack-struct -CFLAGS += -fshort-enums -CFLAGS += -fno-strict-aliasing -CFLAGS += -Wall -CFLAGS += -Wstrict-prototypes -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -fpack-struct -CPPFLAGS += -fshort-enums -CPPFLAGS += -fno-exceptions -CPPFLAGS += -Wall -CPPFLAGS += -Wundef -#CPPFLAGS += -mshort-calls -#CPPFLAGS += -fno-unit-at-a-time -#CPPFLAGS += -Wstrict-prototypes -#CPPFLAGS += -Wunreachable-code -#CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - -# List any extra directories to look for libraries here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax -LDFLAGS += -Wl,--gc-sections -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x - - - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = jtagmkII - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = usb - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -AR = avr-ar rcs -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex eep lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf -MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) -FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) - - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - $(COPY) $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - $(REMOVE) $(TARGET)eep.hex - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) eeprom-flash $(TARGET).eep - dfu-programmer $(MCU) reset - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) -endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause - -else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) -endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT = $(OBJCOPY) --debugging -COFFCONVERT += --change-section-address .data-0x800000 -COFFCONVERT += --change-section-address .bss-0x800000 -COFFCONVERT += --change-section-address .noinit-0x800000 -COFFCONVERT += --change-section-address .eeprom-0x810000 - - - -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ - -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list end - -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep - -doxygen: - @echo Generating Project Documentation \($(TARGET)\)... - @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ - exit 1; \ - fi; - @echo Documentation Generation Complete. - -clean_doxygen: - rm -rf Documentation - -checksource: - @for f in $(SRC) $(CPPSRC) $(ASRC); do \ - if [ -f $$f ]; then \ - echo "Found Source File: $$f" ; \ - else \ - echo "Source File Not Found: $$f" ; \ - fi; done - - -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff doxygen clean \ -clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ -debug gdb-config checksource diff --git a/Projects/LEDNotifier/Config/LUFAConfig.h b/Projects/LEDNotifier/Config/LUFAConfig.h new file mode 100644 index 000000000..3e9c9b213 --- /dev/null +++ b/Projects/LEDNotifier/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/LEDNotifier/Descriptors.c b/Projects/LEDNotifier/Descriptors.c index d5bc6faed..feff81241 100644 --- a/Projects/LEDNotifier/Descriptors.c +++ b/Projects/LEDNotifier/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/LEDNotifier/LEDNotifier.h b/Projects/LEDNotifier/LEDNotifier.h index 8e7249150..8b7754148 100644 --- a/Projects/LEDNotifier/LEDNotifier.h +++ b/Projects/LEDNotifier/LEDNotifier.h @@ -46,7 +46,6 @@ #include "Descriptors.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile index 1c3e54fa5..21529f6b7 100644 --- a/Projects/LEDNotifier/makefile +++ b/Projects/LEDNotifier/makefile @@ -120,13 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskHost.h b/Projects/MIDIToneGenerator/Config/AppConfig.h index 1f8ed212c..381efe089 100644 --- a/Projects/Incomplete/StandaloneProgrammer/DiskHost.h +++ b/Projects/MIDIToneGenerator/Config/AppConfig.h @@ -29,34 +29,20 @@ */ /** \file + * \brief Application Configuration Header File * - * Header file for DiskHost.c. + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. */ -#ifndef _DISK_HOST_H_ -#define _DISK_HOST_H_ - - /* Includes: */ - #include <avr/io.h> - - #include "Descriptors.h" - #include "StandaloneProgrammer.h" - - #include <LUFA/Drivers/USB/USB.h> - #include <LUFA/Drivers/Board/LEDs.h> - - /* External Variables: */ - #if defined(USB_CAN_BE_HOST) - extern USB_ClassInfo_MS_Host_t DiskHost_MS_Interface; - #endif - - /* Function Prototypes: */ - #if defined(USB_CAN_BE_HOST) - void DiskHost_USBTask(void); - - void EVENT_USB_Host_DeviceAttached(void); - void EVENT_USB_Host_DeviceUnattached(void); - #endif +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ -#endif + #define MAX_SIMULTANEOUS_NOTES 3 +#endif
\ No newline at end of file diff --git a/Projects/MIDIToneGenerator/Config/LUFAConfig.h b/Projects/MIDIToneGenerator/Config/LUFAConfig.h new file mode 100644 index 000000000..3e9c9b213 --- /dev/null +++ b/Projects/MIDIToneGenerator/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/MIDIToneGenerator/Descriptors.h b/Projects/MIDIToneGenerator/Descriptors.h index 83844449d..549eeb54e 100644 --- a/Projects/MIDIToneGenerator/Descriptors.h +++ b/Projects/MIDIToneGenerator/Descriptors.h @@ -41,6 +41,8 @@ #include <avr/pgmspace.h> + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2) diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.h b/Projects/MIDIToneGenerator/MIDIToneGenerator.h index 540c59a17..9ebd828c8 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.h +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.h @@ -45,8 +45,8 @@ #include <stdbool.h> #include "Descriptors.h" + #include "Config/AppConfig.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Peripheral/ADC.h> #include <LUFA/Drivers/USB/USB.h> @@ -76,9 +76,6 @@ /** Lowest valid MIDI pitch index */ #define BASE_PITCH_INDEX 21 - /** Maximum number of MIDI notes that can be played simultaneously */ - #define MAX_SIMULTANEOUS_NOTES 3 - /** Number of samples in the virtual sample table (can be expanded to lower maximum frequency, but allow for * more simultaneous notes due to the reduced amount of processing time needed when the samples are spaced out) */ diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.txt b/Projects/MIDIToneGenerator/MIDIToneGenerator.txt index 8b31004ed..82510dba9 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.txt +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.txt @@ -64,7 +64,7 @@ * </tr> * <tr> * <td>MAX_SIMULTANEOUS_NOTES</td> - * <td>MIDIToneGenerator.h</td> + * <td>AppConfig.h</td> * <td>Sets the maximum number of MIDI notes that can be generated simultaneously. More notes require more processing time, * and thus a value that is too high will cause audiable sound distortion due to insufficient CPU time.</td> * </tr> diff --git a/Projects/MIDIToneGenerator/makefile b/Projects/MIDIToneGenerator/makefile index fa160f7aa..d3b77570e 100644 --- a/Projects/MIDIToneGenerator/makefile +++ b/Projects/MIDIToneGenerator/makefile @@ -120,13 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Magstripe/Config/AppConfig.h b/Projects/Magstripe/Config/AppConfig.h new file mode 100644 index 000000000..e54151ebc --- /dev/null +++ b/Projects/Magstripe/Config/AppConfig.h @@ -0,0 +1,58 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MAG_T1_CLOCK (1 << 0) + #define MAG_T1_DATA (1 << 1) + #define MAG_T2_CLOCK (1 << 2) + #define MAG_T2_DATA (1 << 3) + #define MAG_T3_CLOCK (1 << 4) + #define MAG_T3_DATA (1 << 5) + #define MAG_CARDPRESENT (1 << 6) + + #define MAG_PORT PORTC + #define MAG_PIN PINC + #define MAG_DDR DDRC + +#endif
\ No newline at end of file diff --git a/Projects/Magstripe/Config/LUFAConfig.h b/Projects/Magstripe/Config/LUFAConfig.h new file mode 100644 index 000000000..095bac919 --- /dev/null +++ b/Projects/Magstripe/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h index ef5e90849..177e26b01 100644 --- a/Projects/Magstripe/Lib/MagstripeHW.h +++ b/Projects/Magstripe/Lib/MagstripeHW.h @@ -65,6 +65,7 @@ #include <avr/io.h> #include <LUFA/Common/Common.h> + #include "Config/AppConfig.h" /* Private Interface - For use in library only: */ /* Macros: */ diff --git a/Projects/Magstripe/Magstripe.h b/Projects/Magstripe/Magstripe.h index 6e73dcb5b..2e2f63a72 100644 --- a/Projects/Magstripe/Magstripe.h +++ b/Projects/Magstripe/Magstripe.h @@ -46,8 +46,8 @@ #include "Descriptors.h" #include "Lib/MagstripeHW.h" #include "Lib/CircularBitBuffer.h" + #include "Config/AppConfig.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> /* Macros: */ diff --git a/Projects/Magstripe/Magstripe.txt b/Projects/Magstripe/Magstripe.txt index 48fc05929..9c39cbf0a 100644 --- a/Projects/Magstripe/Magstripe.txt +++ b/Projects/Magstripe/Magstripe.txt @@ -110,52 +110,52 @@ * </tr> * <tr> * <td>MAG_T1_CLOCK</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the magnetic card reader's CLOCK line for the reader's track 1 output.</td> * </tr> * <tr> * <td>MAG_T1_DATA</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the magnetic card reader's DATA line for the reader's track 1 output.</td> * </tr> * <tr> * <td>MAG_T2_CLOCK</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the magnetic card reader's CLOCK line for the reader's track 2 output.</td> * </tr> * <tr> * <td>MAG_T2_DATA</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the magnetic card reader's DATA line for the reader's track 2 output.</td> * </tr> * <tr> * <td>MAG_T3_CLOCK</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the magnetic card reader's CLOCK line for the reader's track 3 output.</td> * </tr> * <tr> * <td>MAG_T3_DATA</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the magnetic card reader's DATA line for the reader's track 3 output.</td> * </tr> * <tr> * <td>MAG_CARDPRESENT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Mask for the magnetic card reader's card detection output.</td> * </tr> * <tr> * <td>MAG_PIN</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>PIN register that the magnetic card reader device is attached to.</td> * </tr> * <tr> * <td>MAG_PORT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>PORT register that the magnetic card reader device is attached to.</td> * </tr> * <tr> * <td>MAG_DDR</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>DDR register that the magnetic card reader device is attached to.</td> * </tr> * </table> diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile index 4eb0f6bd0..a23791134 100644 --- a/Projects/Magstripe/makefile +++ b/Projects/Magstripe/makefile @@ -120,24 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D MAG_T1_CLOCK="(1 << 0)" -LUFA_OPTS += -D MAG_T1_DATA="(1 << 1)" -LUFA_OPTS += -D MAG_T2_CLOCK="(1 << 2)" -LUFA_OPTS += -D MAG_T2_DATA="(1 << 3)" -LUFA_OPTS += -D MAG_T3_CLOCK="(1 << 4)" -LUFA_OPTS += -D MAG_T3_DATA="(1 << 5)" -LUFA_OPTS += -D MAG_CARDPRESENT="(1 << 6)" -LUFA_OPTS += -D MAG_PIN=PINB -LUFA_OPTS += -D MAG_DDR=DDRB -LUFA_OPTS += -D MAG_PORT=PORTB +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -183,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/MediaController/Config/LUFAConfig.h b/Projects/MediaController/Config/LUFAConfig.h new file mode 100644 index 000000000..3e9c9b213 --- /dev/null +++ b/Projects/MediaController/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/MediaController/MediaController.h b/Projects/MediaController/MediaController.h index aeb91e77a..fcfa78072 100644 --- a/Projects/MediaController/MediaController.h +++ b/Projects/MediaController/MediaController.h @@ -46,7 +46,6 @@ #include "Descriptors.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/Joystick.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Buttons.h> diff --git a/Projects/MediaController/makefile b/Projects/MediaController/makefile index f38a6eb59..a8862fabf 100644 --- a/Projects/MediaController/makefile +++ b/Projects/MediaController/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/MissileLauncher/Config/LUFAConfig.h b/Projects/MissileLauncher/Config/LUFAConfig.h new file mode 100644 index 000000000..f96994ee9 --- /dev/null +++ b/Projects/MissileLauncher/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ + #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/MissileLauncher/MissileLauncher.h b/Projects/MissileLauncher/MissileLauncher.h index 49036d394..c333f0f75 100644 --- a/Projects/MissileLauncher/MissileLauncher.h +++ b/Projects/MissileLauncher/MissileLauncher.h @@ -45,7 +45,6 @@ #include <string.h> #include <stdio.h> - #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/Board/Joystick.h> diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile index e499535df..dff825fe2 100644 --- a/Projects/MissileLauncher/makefile +++ b/Projects/MissileLauncher/makefile @@ -120,10 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D HOST_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/RelayBoard/Config/LUFAConfig.h b/Projects/RelayBoard/Config/LUFAConfig.h new file mode 100644 index 000000000..c238cc65a --- /dev/null +++ b/Projects/RelayBoard/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 + #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/RelayBoard/RelayBoard.h b/Projects/RelayBoard/RelayBoard.h index 709c009c2..40f570646 100644 --- a/Projects/RelayBoard/RelayBoard.h +++ b/Projects/RelayBoard/RelayBoard.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> diff --git a/Projects/RelayBoard/makefile b/Projects/RelayBoard/makefile index 76bf7559b..949daf0e9 100644 --- a/Projects/RelayBoard/makefile +++ b/Projects/RelayBoard/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D CONTROL_ONLY_DEVICE -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/SerialToLCD/Config/LUFAConfig.h b/Projects/SerialToLCD/Config/LUFAConfig.h new file mode 100644 index 000000000..4637da529 --- /dev/null +++ b/Projects/SerialToLCD/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/SerialToLCD/Descriptors.c b/Projects/SerialToLCD/Descriptors.c index ea8ce8c94..f9a1c7a06 100644 --- a/Projects/SerialToLCD/Descriptors.c +++ b/Projects/SerialToLCD/Descriptors.c @@ -38,17 +38,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/SerialToLCD/SerialToLCD.h b/Projects/SerialToLCD/SerialToLCD.h index 52efe4401..cd893058e 100644 --- a/Projects/SerialToLCD/SerialToLCD.h +++ b/Projects/SerialToLCD/SerialToLCD.h @@ -46,7 +46,6 @@ #include "Descriptors.h" #include "Lib/HD44780.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Misc/RingBuffer.h> #include <LUFA/Drivers/USB/USB.h> diff --git a/Projects/SerialToLCD/makefile b/Projects/SerialToLCD/makefile index 337f249e0..ba7b5aad3 100644 --- a/Projects/SerialToLCD/makefile +++ b/Projects/SerialToLCD/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
@@ -173,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.h b/Projects/TempDataLogger/Config/AppConfig.h index dbfd0d894..86f148f0e 100644 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.h +++ b/Projects/TempDataLogger/Config/AppConfig.h @@ -28,18 +28,21 @@ this software. */ -#ifndef _PROGRAMMER_CONFIG_H_ -#define _PROGRAMMER_CONFIG_H_ - - /* Includes: */ - #include <stdio.h> - #include <string.h> - #include <stdbool.h> - - #include "../StandaloneProgrammer.h" - - /* Function Prototypes: */ - bool ProgrammerConfig_ProcessConfiguration(void); - -#endif - +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + +// #define DUMMY_RTC + +#endif
\ No newline at end of file diff --git a/Projects/TempDataLogger/Config/LUFAConfig.h b/Projects/TempDataLogger/Config/LUFAConfig.h new file mode 100644 index 000000000..4637da529 --- /dev/null +++ b/Projects/TempDataLogger/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/TempDataLogger/Descriptors.c b/Projects/TempDataLogger/Descriptors.c index ffd312df8..551c66ae6 100644 --- a/Projects/TempDataLogger/Descriptors.c +++ b/Projects/TempDataLogger/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** HID class report descriptor. This is a special descriptor constructed with values from the * USBIF HID class specification to describe the reports and capabilities of the HID device. This diff --git a/Projects/TempDataLogger/Descriptors.h b/Projects/TempDataLogger/Descriptors.h index 5f9814308..d48978c46 100644 --- a/Projects/TempDataLogger/Descriptors.h +++ b/Projects/TempDataLogger/Descriptors.h @@ -15,6 +15,7 @@ #include <LUFA/Drivers/USB/USB.h> #include "TempDataLogger.h" + #include "Config/AppConfig.h" /* Macros: */ /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ diff --git a/Projects/TempDataLogger/Lib/DS1307.h b/Projects/TempDataLogger/Lib/DS1307.h index 0736d8ea5..0ad0a4d92 100644 --- a/Projects/TempDataLogger/Lib/DS1307.h +++ b/Projects/TempDataLogger/Lib/DS1307.h @@ -12,6 +12,8 @@ #include <avr/io.h> #include <LUFA/Drivers/Peripheral/TWI.h> + + #include "Config/AppConfig.h" /* Type Defines: */ typedef struct @@ -111,6 +113,7 @@ } DS1307_DateTimeRegs_t; /* Macros: */ + /** TWI address of the DS1307 device on the bus. */ #define DS1307_ADDRESS 0xD0 /* Function Prototypes: */ diff --git a/Projects/TempDataLogger/TempDataLogger.h b/Projects/TempDataLogger/TempDataLogger.h index 08419599e..cf2123506 100644 --- a/Projects/TempDataLogger/TempDataLogger.h +++ b/Projects/TempDataLogger/TempDataLogger.h @@ -49,8 +49,8 @@ #include "Lib/DataflashManager.h" #include "Lib/FATFs/ff.h" #include "Lib/DS1307.h" - - #include <LUFA/Version.h> + #include "Config/AppConfig.h" + #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Temperature.h> #include <LUFA/Drivers/Peripheral/ADC.h> diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt index 1e528f4f2..39eb23da0 100644 --- a/Projects/TempDataLogger/TemperatureDataLogger.txt +++ b/Projects/TempDataLogger/TemperatureDataLogger.txt @@ -77,7 +77,7 @@ * </tr> * <tr> * <td>DUMMY_RTC</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time * stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td> * </tr> diff --git a/Projects/TempDataLogger/makefile b/Projects/TempDataLogger/makefile index e58f2703e..67ce01949 100644 --- a/Projects/TempDataLogger/makefile +++ b/Projects/TempDataLogger/makefile @@ -120,15 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - -#LUFA_OPTS += -D DUMMY_RTC +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -180,7 +172,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/USBtoSerial/Config/LUFAConfig.h b/Projects/USBtoSerial/Config/LUFAConfig.h new file mode 100644 index 000000000..4637da529 --- /dev/null +++ b/Projects/USBtoSerial/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/USBtoSerial/Descriptors.c b/Projects/USBtoSerial/Descriptors.c index b7aa48cb4..2b4bb4ceb 100644 --- a/Projects/USBtoSerial/Descriptors.c +++ b/Projects/USBtoSerial/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/USBtoSerial/USBtoSerial.h b/Projects/USBtoSerial/USBtoSerial.h index d094863e8..ee2bd2f29 100644 --- a/Projects/USBtoSerial/USBtoSerial.h +++ b/Projects/USBtoSerial/USBtoSerial.h @@ -44,7 +44,6 @@ #include "Descriptors.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Peripheral/Serial.h> #include <LUFA/Drivers/Misc/RingBuffer.h> diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile index 93cb3d13f..e4073c1c3 100644 --- a/Projects/USBtoSerial/makefile +++ b/Projects/USBtoSerial/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -172,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Webserver/Config/AppConfig.h b/Projects/Webserver/Config/AppConfig.h new file mode 100644 index 000000000..0f26a7a60 --- /dev/null +++ b/Projects/Webserver/Config/AppConfig.h @@ -0,0 +1,73 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define ENABLE_DHCP_CLIENT + #define ENABLE_DHCP_SERVER + #define ENABLE_TELNET_SERVER + #define MAX_URI_LENGTH 50 + + #define DEVICE_IP_ADDRESS (uint8_t[]){ 10, 0, 0, 2} + #define DEVICE_NETMASK (uint8_t[]){255, 255, 255, 0} + #define DEVICE_GATEWAY (uint8_t[]){ 10, 0, 0, 1} + #define SERVER_MAC_ADDRESS (uint8_t[]){ 1, 0, 1, 0, 1, 0} + + #define UIP_CONF_UDP (defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)) + #define UIP_CONF_BROADCAST 1 + #define UIP_CONF_TCP 1 + #define UIP_CONF_UDP_CONNS 1 + #define UIP_CONF_MAX_CONNECTIONS 3 + #define UIP_CONF_MAX_LISTENPORTS 5 + #define UIP_CONF_BUFFER_SIZE 1514 + #define UIP_CONF_LL_802154 0 + #define UIP_CONF_LL_80211 0 + #define UIP_CONF_ROUTER 0 + #define UIP_CONF_ICMP6 0 + #define UIP_CONF_ICMP_DEST_UNREACH 1 + #define UIP_URGDATA 0 + #define UIP_ARCH_CHKSUM 0 + #define UIP_ARCH_ADD32 0 + #define UIP_NEIGHBOR_CONF_ADDRTYPE 0 + +#endif
\ No newline at end of file diff --git a/Projects/Webserver/Config/LUFAConfig.h b/Projects/Webserver/Config/LUFAConfig.h new file mode 100644 index 000000000..b794426b9 --- /dev/null +++ b/Projects/Webserver/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ + #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/Webserver/Descriptors.c b/Projects/Webserver/Descriptors.c index 57519c864..a82ccc0a4 100644 --- a/Projects/Webserver/Descriptors.c +++ b/Projects/Webserver/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/Webserver/Descriptors.h b/Projects/Webserver/Descriptors.h index 591947c89..969f47b18 100644 --- a/Projects/Webserver/Descriptors.h +++ b/Projects/Webserver/Descriptors.h @@ -41,6 +41,8 @@ #include <LUFA/Drivers/USB/USB.h> + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) diff --git a/Projects/Webserver/Lib/DHCPClientApp.c b/Projects/Webserver/Lib/DHCPClientApp.c index 1a564ca3e..91c0f1f06 100644 --- a/Projects/Webserver/Lib/DHCPClientApp.c +++ b/Projects/Webserver/Lib/DHCPClientApp.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__) - /** \file * * DHCP Client Application. When connected to the uIP stack, this will retrieve IP configuration settings from the @@ -39,6 +37,8 @@ #define INCLUDE_FROM_DHCPCLIENTAPP_C #include "DHCPClientApp.h" +#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__) + /** Initialization function for the DHCP client. */ void DHCPClientApp_Init(void) { diff --git a/Projects/Webserver/Lib/DHCPClientApp.h b/Projects/Webserver/Lib/DHCPClientApp.h index 21c5e435a..b5ce11cbc 100644 --- a/Projects/Webserver/Lib/DHCPClientApp.h +++ b/Projects/Webserver/Lib/DHCPClientApp.h @@ -41,6 +41,7 @@ #include <uip.h> + #include "Config/AppConfig.h" #include "../Webserver.h" #include "DHCPCommon.h" diff --git a/Projects/Webserver/Lib/DHCPCommon.c b/Projects/Webserver/Lib/DHCPCommon.c index f2b999756..b0fe37d04 100644 --- a/Projects/Webserver/Lib/DHCPCommon.c +++ b/Projects/Webserver/Lib/DHCPCommon.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) - /** \file * * Common DHCP routines to manage DHCP packet data. @@ -37,6 +35,8 @@ #include "DHCPCommon.h" +#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) + /** Sets the given DHCP option in the DHCP packet's option list. This automatically moves the * end of options terminator past the new option in the options list. * diff --git a/Projects/Webserver/Lib/DHCPCommon.h b/Projects/Webserver/Lib/DHCPCommon.h index 797aa571b..dc8dcdfbc 100644 --- a/Projects/Webserver/Lib/DHCPCommon.h +++ b/Projects/Webserver/Lib/DHCPCommon.h @@ -41,6 +41,8 @@ #include <stdbool.h> #include <string.h> + #include "Config/AppConfig.h" + #include <uip.h> /* Macros: */ diff --git a/Projects/Webserver/Lib/DHCPServerApp.c b/Projects/Webserver/Lib/DHCPServerApp.c index e2b72af27..05ae4e9e2 100644 --- a/Projects/Webserver/Lib/DHCPServerApp.c +++ b/Projects/Webserver/Lib/DHCPServerApp.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) - /** \file * * DHCP Server Application. When connected to the uIP stack, this will send IP configuration settings to a @@ -39,6 +37,8 @@ #define INCLUDE_FROM_DHCPSERVERAPP_C #include "DHCPServerApp.h" +#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) + struct uip_conn* BroadcastConnection; uint8_t LeasedIPs[255 / 8]; diff --git a/Projects/Webserver/Lib/DHCPServerApp.h b/Projects/Webserver/Lib/DHCPServerApp.h index 151319b5d..d41df3776 100644 --- a/Projects/Webserver/Lib/DHCPServerApp.h +++ b/Projects/Webserver/Lib/DHCPServerApp.h @@ -41,6 +41,7 @@ #include <uip.h> + #include "Config/AppConfig.h" #include "../Webserver.h" #include "DHCPCommon.h" diff --git a/Projects/Webserver/Lib/HTTPServerApp.h b/Projects/Webserver/Lib/HTTPServerApp.h index 526e75804..e3678e845 100644 --- a/Projects/Webserver/Lib/HTTPServerApp.h +++ b/Projects/Webserver/Lib/HTTPServerApp.h @@ -41,6 +41,8 @@ #include <string.h> #include <LUFA/Version.h> + + #include "Config/AppConfig.h" #include <uip.h> #include <ff.h> diff --git a/Projects/Webserver/Lib/TELNETServerApp.c b/Projects/Webserver/Lib/TELNETServerApp.c index 3fffae1d1..ff829b9ef 100644 --- a/Projects/Webserver/Lib/TELNETServerApp.c +++ b/Projects/Webserver/Lib/TELNETServerApp.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__) - /** \file * * TELNET Webserver Application. When connected to the uIP stack, @@ -39,6 +37,8 @@ #define INCLUDE_FROM_TELNETSERVERAPP_C #include "TELNETServerApp.h" +#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__) + /** Welcome message to send to a TELNET client when a connection is first made. */ const char PROGMEM WelcomeHeader[] = "********************************************\r\n" "* LUFA uIP Webserver (TELNET) *\r\n" diff --git a/Projects/Webserver/Lib/TELNETServerApp.h b/Projects/Webserver/Lib/TELNETServerApp.h index 5f3e864c9..df580f53b 100644 --- a/Projects/Webserver/Lib/TELNETServerApp.h +++ b/Projects/Webserver/Lib/TELNETServerApp.h @@ -43,6 +43,8 @@ #include <uip.h> + #include "Config/AppConfig.h" + /* Macros: */ /** TCP listen port for incoming TELNET traffic. */ #define TELNET_SERVER_PORT 23 diff --git a/Projects/Webserver/Lib/uIPManagement.h b/Projects/Webserver/Lib/uIPManagement.h index 390d3c448..3e4e6a754 100644 --- a/Projects/Webserver/Lib/uIPManagement.h +++ b/Projects/Webserver/Lib/uIPManagement.h @@ -43,30 +43,14 @@ #include <uip_arp.h> #include <uip-split.h> #include <timer.h> + + #include "Config/AppConfig.h" #include "DHCPClientApp.h" #include "DHCPServerApp.h" #include "HTTPServerApp.h" #include "TELNETServerApp.h" - /* Macros: */ - /** IP address that the webserver should use once connected to a RNDIS device (when DHCP is disabled). */ - #define DEVICE_IP_ADDRESS (uint8_t[]){10, 0, 0, 2} - - /** Netmask that the webserver should once connected to a RNDIS device (when DHCP is disabled). */ - #define DEVICE_NETMASK (uint8_t[]){255, 255, 255, 0} - - /** IP address of the default gateway the webserver should use when routing outside the local subnet - * (when DHCP is disabled). - */ - #define DEVICE_GATEWAY (uint8_t[]){10, 0, 0, 1} - - /** Ethernet MAC address of the virtual webserver. When in device RNDIS mode, the virtual webserver requires - * a unique MAC address that it can use when sending packets to the RNDIS adapter, which contains a seperate - * MAC address as set in the RNDIS class driver configuration structure. - */ - #define SERVER_MAC_ADDRESS (uint8_t[]){1, 0, 1, 0, 1, 0} - /* External Variables: */ extern struct uip_eth_addr MACAddress; diff --git a/Projects/Webserver/Lib/uip/uipopt.h b/Projects/Webserver/Lib/uip/uipopt.h index 17f703312..520c03f25 100644 --- a/Projects/Webserver/Lib/uip/uipopt.h +++ b/Projects/Webserver/Lib/uip/uipopt.h @@ -62,6 +62,8 @@ #ifndef __UIPOPT_H__ #define __UIPOPT_H__ +#include "Config/AppConfig.h" + #ifndef UIP_LITTLE_ENDIAN #define UIP_LITTLE_ENDIAN 3412 #endif /* UIP_LITTLE_ENDIAN */ diff --git a/Projects/Webserver/USBDeviceMode.h b/Projects/Webserver/USBDeviceMode.h index 617c26273..86b3e9196 100644 --- a/Projects/Webserver/USBDeviceMode.h +++ b/Projects/Webserver/USBDeviceMode.h @@ -40,10 +40,11 @@ #include <LUFA/Drivers/USB/USB.h> #include "Webserver.h" - #include "Lib/uIPManagement.h" #include "Descriptors.h" + #include "Lib/uIPManagement.h" #include "Lib/SCSI.h" - + #include "Config/AppConfig.h" + /* External Variables: */ extern USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device; diff --git a/Projects/Webserver/USBHostMode.h b/Projects/Webserver/USBHostMode.h index c9186589b..d084e0983 100644 --- a/Projects/Webserver/USBHostMode.h +++ b/Projects/Webserver/USBHostMode.h @@ -41,6 +41,7 @@ #include "Webserver.h" #include "Lib/uIPManagement.h" + #include "Config/AppConfig.h" /* External Variables: */ extern USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host; diff --git a/Projects/Webserver/Webserver.h b/Projects/Webserver/Webserver.h index 199bc8ec9..8c4771164 100644 --- a/Projects/Webserver/Webserver.h +++ b/Projects/Webserver/Webserver.h @@ -43,7 +43,6 @@ #include <avr/power.h> #include <avr/interrupt.h> - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Dataflash.h> #include <LUFA/Drivers/Peripheral/SPI.h> @@ -51,6 +50,7 @@ #include "USBDeviceMode.h" #include "USBHostMode.h" + #include "Config/AppConfig.h" /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/Webserver/Webserver.txt b/Projects/Webserver/Webserver.txt index 56e9d25fa..2ec836906 100644 --- a/Projects/Webserver/Webserver.txt +++ b/Projects/Webserver/Webserver.txt @@ -81,41 +81,46 @@ * </tr> * <tr> * <td>ENABLE_TELNET_SERVER</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections * and processes user commands.</td> * </tr> * <tr> * <td>ENABLE_DHCP_CLIENT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>When defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.</td> * </tr> * <tr> * <td>ENABLE_DHCP_SERVER</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>When defined, this enables the DHCP server for dynamic IP allocation of the network settings to a DHCP client.</td> * </tr> * <tr> * <td>DEVICE_IP_ADDRESS</td> - * <td>Lib/uIPManagement.h</td> + * <td>AppConfig.h</td> * <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td> * </tr> * <tr> * <td>DEVICE_NETMASK</td> - * <td>Lib/uIPManagement.h</td> + * <td>AppConfig.h</td> * <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td> * </tr> * <tr> * <td>DEVICE_GATEWAY</td> - * <td>Lib/uIPManagement.h</td> + * <td>AppConfig.h</td> * <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT * is not defined).</td> * </tr> * <tr> * <td>MAX_URI_LENGTH</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.</td> * </tr> + * <tr> + * <td>SERVER_MAC_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>MAC address of the server used when sending Ethernet packets onto the bus.</td> + * </tr> * </table> */ diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile index 9e49059c0..ea45786db 100644 --- a/Projects/Webserver/makefile +++ b/Projects/Webserver/makefile @@ -120,34 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - -LUFA_OPTS += -D ENABLE_DHCP_CLIENT -LUFA_OPTS += -D ENABLE_DHCP_SERVER -LUFA_OPTS += -D ENABLE_TELNET_SERVER -LUFA_OPTS += -D MAX_URI_LENGTH=50 - -LUFA_OPTS += -D UIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)" -LUFA_OPTS += -D UIP_CONF_BROADCAST=1 -LUFA_OPTS += -D UIP_CONF_TCP=1 -LUFA_OPTS += -D UIP_CONF_UDP_CONNS=1 -LUFA_OPTS += -D UIP_CONF_MAX_CONNECTIONS=3 -LUFA_OPTS += -D UIP_CONF_MAX_LISTENPORTS=5 -LUFA_OPTS += -D UIP_CONF_BUFFER_SIZE=1514 -LUFA_OPTS += -D UIP_CONF_LL_802154=0 -LUFA_OPTS += -D UIP_CONF_LL_80211=0 -LUFA_OPTS += -D UIP_CONF_ROUTER=0 -LUFA_OPTS += -D UIP_CONF_ICMP6=0 -LUFA_OPTS += -D UIP_CONF_ICMP_DEST_UNREACH=1 -LUFA_OPTS += -D UIP_URGDATA=0 -LUFA_OPTS += -D UIP_ARCH_CHKSUM=0 -LUFA_OPTS += -D UIP_ARCH_ADD32=0 -LUFA_OPTS += -D UIP_NEIGHBOR_CONF_ADDRTYPE=0 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -209,7 +182,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/ # Compiler flag to set the C Standard level. diff --git a/Projects/XPLAINBridge/AVRISPDescriptors.h b/Projects/XPLAINBridge/AVRISPDescriptors.h index c0eeedf70..b3541c82f 100644 --- a/Projects/XPLAINBridge/AVRISPDescriptors.h +++ b/Projects/XPLAINBridge/AVRISPDescriptors.h @@ -41,6 +41,8 @@ #include <LUFA/Drivers/USB/USB.h> + #include "Config/AppConfig.h" + /* Macros: */ #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__) /** Endpoint address of the AVRISP data OUT endpoint. */ diff --git a/Projects/XPLAINBridge/Config/AppConfig.h b/Projects/XPLAINBridge/Config/AppConfig.h new file mode 100644 index 000000000..3fe80171d --- /dev/null +++ b/Projects/XPLAINBridge/Config/AppConfig.h @@ -0,0 +1,64 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define AUX_LINE_PORT PORTB + #define AUX_LINE_PIN PINB + #define AUX_LINE_DDR DDRB + #define AUX_LINE_MASK (1 << 4) + + #define ENABLE_XPROG_PROTOCOL + + #define VTARGET_ADC_CHANNEL 2 + #define VTARGET_REF_VOLTS 3.3 + #define VTARGET_SCALE_FACTOR 2 +// #define VTARGET_USE_INTERNAL_REF +// #define NO_VTARGET_DETECT +// #define XCK_RESCUE_CLOCK_ENABLE +// #define INVERTED_ISP_MISO + +// #define LIBUSB_DRIVER_COMPAT +// #define FIRMWARE_VERSION_MINOR 0x11 + +#endif
\ No newline at end of file diff --git a/Projects/XPLAINBridge/Config/LUFAConfig.h b/Projects/XPLAINBridge/Config/LUFAConfig.h new file mode 100644 index 000000000..4cd8b39f1 --- /dev/null +++ b/Projects/XPLAINBridge/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 16 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/XPLAINBridge/Lib/SoftUART.h b/Projects/XPLAINBridge/Lib/SoftUART.h index c30ad651e..e2492ce77 100644 --- a/Projects/XPLAINBridge/Lib/SoftUART.h +++ b/Projects/XPLAINBridge/Lib/SoftUART.h @@ -44,7 +44,8 @@ #include <stdbool.h> #include "../XPLAINBridge.h" - + #include "Config/AppConfig.h" + /* Macros: */ #define SRX PD0 #define SRXPIN PIND diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c index 6c131afd4..1b265411c 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.c +++ b/Projects/XPLAINBridge/USARTDescriptors.c @@ -37,17 +37,6 @@ #include "USARTDescriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/XPLAINBridge/USARTDescriptors.h b/Projects/XPLAINBridge/USARTDescriptors.h index 4bb771be9..cc8db29c9 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.h +++ b/Projects/XPLAINBridge/USARTDescriptors.h @@ -41,6 +41,8 @@ #include <LUFA/Drivers/USB/USB.h> + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) diff --git a/Projects/XPLAINBridge/XPLAINBridge.h b/Projects/XPLAINBridge/XPLAINBridge.h index 33c66bf51..688ac7bd6 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.h +++ b/Projects/XPLAINBridge/XPLAINBridge.h @@ -48,8 +48,8 @@ #include "Lib/V2Protocol.h" #include "Lib/SoftUART.h" + #include "Config/AppConfig.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Misc/RingBuffer.h> #include <LUFA/Drivers/USB/USB.h> diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt index f7e3db6b8..1d672a6ea 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.txt +++ b/Projects/XPLAINBridge/XPLAINBridge.txt @@ -80,13 +80,13 @@ * </tr> * <tr> * <td>LIBUSB_DRIVER_COMPAT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making * the code compatible with software such as avrdude (all platforms) that use the libUSB driver.</td> * </tr> * <tr> * <td>FIRMWARE_VERSION_MINOR</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td> * </tr> diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile index fe4b8aea5..0f5ca9644 100644 --- a/Projects/XPLAINBridge/makefile +++ b/Projects/XPLAINBridge/makefile @@ -124,25 +124,7 @@ AVRISP_PATH = ../AVRISP-MKII # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_DEVICE_SELF_POWER - -LUFA_OPTS += -D AUX_LINE_PORT=PORTB -LUFA_OPTS += -D AUX_LINE_PIN=PINB -LUFA_OPTS += -D AUX_LINE_DDR=DDRB -LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)" -LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2 -LUFA_OPTS += -D VTARGET_REF_VOLTS=3.3 -LUFA_OPTS += -D VTARGET_SCALE_FACTOR=2 -#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT -#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile include $(LUFA_PATH)/LUFA/makefile @@ -196,7 +178,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ Config/ # Compiler flag to set the C Standard level. |