7 files changed, 149 insertions, 23 deletions
diff --git a/Projects/TempDataLogger/Config/AppConfig.h b/Projects/TempDataLogger/Config/AppConfig.h
new file mode 100644
index 000000000..86f148f0e
--- /dev/null
+++ b/Projects/TempDataLogger/Config/AppConfig.h
@@ -0,0 +1,48 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+//	#define DUMMY_RTC
+
+#endif
+\ No newline at end of file
diff --git a/Projects/TempDataLogger/Config/LUFAConfig.h b/Projects/TempDataLogger/Config/LUFAConfig.h
new file mode 100644
index 000000000..4637da529
--- /dev/null
+++ b/Projects/TempDataLogger/Config/LUFAConfig.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+		#define DEVICE_STATE_AS_GPIOR            0
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              0
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//      #define NO_AUTO_VBUS_MANAGEMENT
+//      #define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/Projects/TempDataLogger/Descriptors.c b/Projects/TempDataLogger/Descriptors.c
index ffd312df8..551c66ae6 100644
--- a/Projects/TempDataLogger/Descriptors.c
+++ b/Projects/TempDataLogger/Descriptors.c
@@ -37,17 +37,6 @@
 
 #include "Descriptors.h"
 
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
-	#warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
 
 /** HID class report descriptor. This is a special descriptor constructed with values from the
  *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
diff --git a/Projects/TempDataLogger/Lib/DS1307.h b/Projects/TempDataLogger/Lib/DS1307.h
index 0736d8ea5..0ad0a4d92 100644
--- a/Projects/TempDataLogger/Lib/DS1307.h
+++ b/Projects/TempDataLogger/Lib/DS1307.h
@@ -12,6 +12,8 @@
 		#include <avr/io.h>
 
 		#include <LUFA/Drivers/Peripheral/TWI.h>
+		
+		#include "Config/AppConfig.h"
 
 	/* Type Defines: */
 		typedef struct
@@ -111,6 +113,7 @@
 		} DS1307_DateTimeRegs_t;
 
 	/* Macros: */
+		/** TWI address of the DS1307 device on the bus. */
 		#define DS1307_ADDRESS       0xD0
 
 	/* Function Prototypes: */
diff --git a/Projects/TempDataLogger/TempDataLogger.h b/Projects/TempDataLogger/TempDataLogger.h
index 08419599e..b9c45fc54 100644
--- a/Projects/TempDataLogger/TempDataLogger.h
+++ b/Projects/TempDataLogger/TempDataLogger.h
@@ -49,7 +49,8 @@
 		#include "Lib/DataflashManager.h"
 		#include "Lib/FATFs/ff.h"
 		#include "Lib/DS1307.h"
-
+		#include "Config/AppConfig.h"
+		
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/Board/Temperature.h>
diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt
index 01a080d87..f416d7b26 100644
--- a/Projects/TempDataLogger/TemperatureDataLogger.txt
+++ b/Projects/TempDataLogger/TemperatureDataLogger.txt
@@ -77,7 +77,7 @@
  *   </tr>
  *   <tr>
  *    <td>DUMMY_RTC</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time
  *        stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td>
  *   </tr>
diff --git a/Projects/TempDataLogger/makefile b/Projects/TempDataLogger/makefile
index 5d1d0bf4f..5cc168de9 100644
--- a/Projects/TempDataLogger/makefile
+++ b/Projects/TempDataLogger/makefile
@@ -120,15 +120,7 @@ LUFA_PATH = ../..
 
 
 # LUFA library compile-time options and predefined tokens
-LUFA_OPTS  = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-#LUFA_OPTS += -D DUMMY_RTC
+LUFA_OPTS  = -D USE_LUFA_CONFIG_HEADER
 
 
 # Create the LUFA source path variables by including the LUFA root makefile
@@ -180,7 +172,7 @@ DEBUG = dwarf-2
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
 
 
 # Compiler flag to set the C Standard level.