aboutsummaryrefslogtreecommitdiffstats
path: root/Projects/AVRISP
diff options
context:
space:
mode:
Diffstat (limited to 'Projects/AVRISP')
-rw-r--r--Projects/AVRISP/Lib/NVMTarget.c66
-rw-r--r--Projects/AVRISP/Lib/NVMTarget.h10
-rw-r--r--Projects/AVRISP/Lib/PDIProtocol.c2
-rw-r--r--Projects/AVRISP/Lib/PDITarget.c27
-rw-r--r--Projects/AVRISP/Lib/PDITarget.h3
5 files changed, 67 insertions, 41 deletions
diff --git a/Projects/AVRISP/Lib/NVMTarget.c b/Projects/AVRISP/Lib/NVMTarget.c
index a23ccf292..b57cf6d31 100644
--- a/Projects/AVRISP/Lib/NVMTarget.c
+++ b/Projects/AVRISP/Lib/NVMTarget.c
@@ -40,8 +40,10 @@
void NVMTarget_SendNVMRegAddress(uint8_t Register)
{
+ /* Determine the absolute register address from the NVM base memory address and the NVM register address */
uint32_t Address = XPROG_Param_NVMBase | Register;
+ /* Send the calculated 32-bit address to the target, LSB first */
PDITarget_SendByte(Address & 0xFF);
PDITarget_SendByte(Address >> 8);
PDITarget_SendByte(Address >> 16);
@@ -50,38 +52,30 @@ void NVMTarget_SendNVMRegAddress(uint8_t Register)
void NVMTarget_SendAddress(uint32_t AbsoluteAddress)
{
+ /* Send the given 32-bit address to the target, LSB first */
PDITarget_SendByte(AbsoluteAddress & 0xFF);
PDITarget_SendByte(AbsoluteAddress >> 8);
PDITarget_SendByte(AbsoluteAddress >> 16);
PDITarget_SendByte(AbsoluteAddress >> 24);
}
-bool NVMTarget_WaitWhileNVMBusBusy(void)
+bool NVMTarget_WaitWhileNVMControllerBusy(void)
{
- uint8_t AttemptsRemaining = 255;
+ TCNT0 = 0;
- /* Poll the STATUS register to check to see if NVM access has been enabled */
- while (AttemptsRemaining--)
- {
- PDITarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
- if (PDITarget_ReceiveByte() & PDI_STATUS_NVM)
- return true;
- }
-
- return false;
-}
-
-void NVMTarget_WaitWhileNVMControllerBusy(void)
-{
/* Poll the NVM STATUS register while the NVM controller is busy */
- for (;;)
+ while (TCNT0 < NVM_BUSY_TIMEOUT_MS)
{
+ /* Send a LDS command to read the NVM STATUS register to check the BUSY flag */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_STATUS);
+ /* Check to see if the BUSY flag is still set */
if (!(PDITarget_ReceiveByte() & (1 << 7)))
- return;
+ return true;
}
+
+ return false;
}
uint32_t NVMTarget_GetMemoryCRC(uint8_t MemoryCommand)
@@ -101,18 +95,20 @@ uint32_t NVMTarget_GetMemoryCRC(uint8_t MemoryCommand)
PDITarget_SendByte(1 << 0);
/* Wait until the NVM bus and controller is no longer busy */
- NVMTarget_WaitWhileNVMBusBusy();
+ PDITarget_WaitWhileNVMBusBusy();
NVMTarget_WaitWhileNVMControllerBusy();
- /* Read the three bytes generated CRC value */
+ /* Read the first generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT0);
MemoryCRC = PDITarget_ReceiveByte();
+ /* Read the second generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT1);
MemoryCRC |= ((uint16_t)PDITarget_ReceiveByte() << 8);
+ /* Read the third generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT2);
MemoryCRC |= ((uint32_t)PDITarget_ReceiveByte() << 16);
@@ -123,17 +119,33 @@ uint32_t NVMTarget_GetMemoryCRC(uint8_t MemoryCommand)
void NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize)
{
NVMTarget_WaitWhileNVMControllerBusy();
-
+
+ /* Send the READNVM command to the NVM controller for reading of an aribtrary location */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
PDITarget_SendByte(NVM_CMD_READNVM);
- /* TODO: Optimize via REPEAT and buffer orientated commands */
- for (uint16_t i = 0; i < ReadSize; i++)
+ /* Send the address of the first location to read from - this also primes the internal address
+ * counters so that we can use the REPEAT command later to save on overhead for multiple bytes */
+ PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
+ NVMTarget_SendAddress(ReadAddress);
+ *(ReadBuffer++) = PDITarget_ReceiveByte();
+
+ /* Check to see if we are reading more than a single byte */
+ if (ReadSize > 1)
{
- PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
- NVMTarget_SendAddress(ReadAddress++);
- *(ReadBuffer++) = PDITarget_ReceiveByte();
+ /* Decrement the ReadSize counter as we have already read once byte of memory */
+ ReadSize--;
+
+ /* Send the REPEAT command with the specified number of bytes remaining to read */
+ PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_2BYTES);
+ PDITarget_SendByte(ReadSize & 0xFF);
+ PDITarget_SendByte(ReadSize >> 8);
+
+ /* Send a LD command with indirect access and postincrement to read out the remaining bytes */
+ PDITarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
+ for (uint16_t i = 1; i < ReadSize; i++)
+ *(ReadBuffer++) = PDITarget_ReceiveByte();
}
}
@@ -145,6 +157,7 @@ void NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address)
NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
PDITarget_SendByte(EraseCommand);
+ /* Chip erase is handled seperately, since it's procedure is different to other erase types */
if (EraseCommand == NVM_CMD_CHIPERASE)
{
/* Set CMDEX bit in NVM CTRLA register to start the chip erase */
@@ -160,7 +173,8 @@ void NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address)
PDITarget_SendByte(0x00);
}
- NVMTarget_WaitWhileNVMBusBusy();
+ /* Wait until both the NVM bus and NVM controller are ready again */
+ PDITarget_WaitWhileNVMBusBusy();
NVMTarget_WaitWhileNVMControllerBusy();
}
diff --git a/Projects/AVRISP/Lib/NVMTarget.h b/Projects/AVRISP/Lib/NVMTarget.h
index bd9296f74..7fde84538 100644
--- a/Projects/AVRISP/Lib/NVMTarget.h
+++ b/Projects/AVRISP/Lib/NVMTarget.h
@@ -56,12 +56,7 @@
#endif
/* Defines: */
- #define FLASH_BASE 0x00800000
- #define EPPROM_BASE 0x008C0000
- #define FUSE_BASE 0x008F0020
- #define DATAMEM_BASE 0x01000000
- #define PROD_SIGNATURE_BASE 0x008E0200
- #define USER_SIGNATURE_BASE 0x008E0400
+ #define NVM_BUSY_TIMEOUT_MS 200
#define NVM_REG_ADDR0 0x00
#define NVM_REG_ADDR1 0x01
@@ -113,8 +108,7 @@
/* Function Prototypes: */
void NVMTarget_SendNVMRegAddress(uint8_t Register);
void NVMTarget_SendAddress(uint32_t AbsoluteAddress);
- bool NVMTarget_WaitWhileNVMBusBusy(void);
- void NVMTarget_WaitWhileNVMControllerBusy(void);
+ bool NVMTarget_WaitWhileNVMControllerBusy(void);
uint32_t NVMTarget_GetMemoryCRC(uint8_t MemoryCommand);
void NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize);
void NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address);
diff --git a/Projects/AVRISP/Lib/PDIProtocol.c b/Projects/AVRISP/Lib/PDIProtocol.c
index 39f33cf49..af6fbeaf9 100644
--- a/Projects/AVRISP/Lib/PDIProtocol.c
+++ b/Projects/AVRISP/Lib/PDIProtocol.c
@@ -114,7 +114,7 @@ static void PDIProtocol_EnterXPROGMode(void)
PDITarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
/* Wait until the NVM bus becomes active */
- bool NVMBusEnabled = NVMTarget_WaitWhileNVMBusBusy();
+ bool NVMBusEnabled = PDITarget_WaitWhileNVMBusBusy();
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
diff --git a/Projects/AVRISP/Lib/PDITarget.c b/Projects/AVRISP/Lib/PDITarget.c
index e1b77f046..9f2bea8d4 100644
--- a/Projects/AVRISP/Lib/PDITarget.c
+++ b/Projects/AVRISP/Lib/PDITarget.c
@@ -44,7 +44,7 @@ volatile bool IsSending;
volatile uint16_t SoftUSART_Data;
volatile uint8_t SoftUSART_BitCount;
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+ISR(TIMER1_COMPA_vect, ISR_BLOCK)
{
/* Toggle CLOCK pin in a single cycle (see AVR datasheet) */
BITBANG_PDICLOCK_PIN |= BITBANG_PDICLOCK_MASK;
@@ -112,11 +112,10 @@ void PDITarget_EnableTargetPDI(void)
asm volatile ("NOP"::);
asm volatile ("NOP"::);
- /* Fire timer compare ISR every 50 cycles to manage the software USART */
- OCR0A = 50;
- TCCR0A = (1 << WGM01);
- TCCR0B = (1 << CS00);
- TIMSK0 = (1 << OCIE0A);
+ /* Fire timer compare ISR every 100 cycles to manage the software USART */
+ OCR1A = 100;
+ TCCR1B = (1 << WGM12) | (1 << CS10);
+ TIMSK1 = (1 << OCIE1A);
PDITarget_SendBreak();
PDITarget_SendBreak();
@@ -275,4 +274,20 @@ void PDITarget_SendBreak(void)
#endif
}
+bool PDITarget_WaitWhileNVMBusBusy(void)
+{
+ TCNT0 = 0;
+
+ /* Poll the STATUS register to check to see if NVM access has been enabled */
+ while (TCNT0 < PDI_NVM_TIMEOUT_MS)
+ {
+ /* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
+ PDITarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
+ if (PDITarget_ReceiveByte() & PDI_STATUS_NVM)
+ return true;
+ }
+
+ return false;
+}
+
#endif
diff --git a/Projects/AVRISP/Lib/PDITarget.h b/Projects/AVRISP/Lib/PDITarget.h
index 2a2af6e27..03083fcb6 100644
--- a/Projects/AVRISP/Lib/PDITarget.h
+++ b/Projects/AVRISP/Lib/PDITarget.h
@@ -69,6 +69,8 @@
#define BITS_IN_FRAME 12
+ #define PDI_NVM_TIMEOUT_MS 200
+
#define PDI_CMD_LDS 0x00
#define PDI_CMD_LD 0x20
#define PDI_CMD_STS 0x40
@@ -102,5 +104,6 @@
void PDITarget_SendByte(uint8_t Byte);
uint8_t PDITarget_ReceiveByte(void);
void PDITarget_SendBreak(void);
+ bool PDITarget_WaitWhileNVMBusBusy(void);
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2025-10-31 04:02:47 +0000