diff options
Diffstat (limited to 'Projects/AVRISP/Lib')
| -rw-r--r-- | Projects/AVRISP/Lib/NVMTarget.c | 67 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/NVMTarget.h | 12 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/PDIProtocol.c | 10 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/PDITarget.c | 7 |
4 files changed, 57 insertions, 39 deletions
diff --git a/Projects/AVRISP/Lib/NVMTarget.c b/Projects/AVRISP/Lib/NVMTarget.c index 85de13069..c2ed92d2e 100644 --- a/Projects/AVRISP/Lib/NVMTarget.c +++ b/Projects/AVRISP/Lib/NVMTarget.c @@ -93,16 +93,17 @@ bool NVMTarget_WaitWhileNVMControllerBusy(void) /** Retrieves the CRC value of the given memory space.
*
- * \param[in] CRCCommand NVM CRC command to issue to the target
+ * \param[in] CRCCommand NVM CRC command to issue to the target
+ * \param[out] CRCDest CRC Destination when read from the target
*
- * \return 24-bit CRC value for the given address space
+ * \return Boolean true if the command sequence complete sucessfully
*/
-uint32_t NVMTarget_GetMemoryCRC(uint8_t CRCCommand)
+bool NVMTarget_GetMemoryCRC(uint8_t CRCCommand, uint32_t* CRCDest)
{
- uint32_t MemoryCRC;
-
- NVMTarget_WaitWhileNVMControllerBusy();
-
+ /* Wait until the NVM controller is no longer busy */
+ if (!(NVMTarget_WaitWhileNVMControllerBusy()))
+ return false;
+
/* Set the NVM command to the correct CRC read command */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
@@ -113,26 +114,28 @@ uint32_t NVMTarget_GetMemoryCRC(uint8_t CRCCommand) NVMTarget_SendNVMRegAddress(NVM_REG_CTRLA);
PDITarget_SendByte(1 << 0);
- /* Wait until the NVM bus and controller is no longer busy */
- PDITarget_WaitWhileNVMBusBusy();
- NVMTarget_WaitWhileNVMControllerBusy();
+ /* Wait until the NVM controller is no longer busy */
+ if (!(NVMTarget_WaitWhileNVMControllerBusy()))
+ return false;
+
+ *CRCDest = 0;
/* Read the first generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT0);
- MemoryCRC = PDITarget_ReceiveByte();
+ *CRCDest = PDITarget_ReceiveByte();
/* Read the second generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT1);
- MemoryCRC |= ((uint16_t)PDITarget_ReceiveByte() << 8);
+ *CRCDest |= ((uint16_t)PDITarget_ReceiveByte() << 8);
/* Read the third generated CRC byte value */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_DAT2);
- MemoryCRC |= ((uint32_t)PDITarget_ReceiveByte() << 16);
+ *CRCDest |= ((uint32_t)PDITarget_ReceiveByte() << 16);
- return MemoryCRC;
+ return true;
}
/** Reads memory from the target's memory spaces.
@@ -140,10 +143,14 @@ uint32_t NVMTarget_GetMemoryCRC(uint8_t CRCCommand) * \param[in] ReadAddress Start address to read from within the target's address space
* \param[out] ReadBuffer Buffer to store read data into
* \param[in] ReadSize Number of bytes to read
+ *
+ * \return Boolean true if the command sequence complete sucessfully
*/
-void NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize)
+bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize)
{
- NVMTarget_WaitWhileNVMControllerBusy();
+ /* Wait until the NVM controller is no longer busy */
+ if (!(NVMTarget_WaitWhileNVMControllerBusy()))
+ return false;
/* Send the READNVM command to the NVM controller for reading of an aribtrary location */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
@@ -154,14 +161,11 @@ void NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t Re * counters so that we can use the REPEAT command later to save on overhead for multiple bytes */
PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendAddress(ReadAddress);
- *(ReadBuffer++) = PDITarget_ReceiveByte();
+ *ReadBuffer = PDITarget_ReceiveByte();
/* Check to see if we are reading more than a single byte */
if (ReadSize > 1)
{
- /* Decrement the ReadSize counter as we have already read once byte of memory */
- ReadSize--;
-
/* Send the REPEAT command with the specified number of bytes remaining to read */
PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_2BYTES);
PDITarget_SendByte(ReadSize & 0xFF);
@@ -169,20 +173,27 @@ void NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t Re /* Send a LD command with indirect access and postincrement to read out the remaining bytes */
PDITarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
- for (uint16_t i = 1; i < ReadSize; i++)
+ for (uint16_t i = 0; i < ReadSize; i++)
*(ReadBuffer++) = PDITarget_ReceiveByte();
}
+
+ return true;
}
/** Erases a specific memory space of the target.
*
* \param[in] EraseCommand NVM erase command to send to the device
* \param[in] Address Address inside the memory space to erase
+ *
+ * \return Boolean true if the command sequence complete sucessfully
*/
-void NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address)
+bool NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address)
{
- NVMTarget_WaitWhileNVMControllerBusy();
-
+ /* Wait until the NVM controller is no longer busy */
+ if (!(NVMTarget_WaitWhileNVMControllerBusy()))
+ return false;
+
+ /* Send the memory erase command to the target */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
PDITarget_SendByte(EraseCommand);
@@ -203,9 +214,11 @@ void NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address) PDITarget_SendByte(0x00);
}
- /* Wait until both the NVM bus and NVM controller are ready again */
- PDITarget_WaitWhileNVMBusBusy();
- NVMTarget_WaitWhileNVMControllerBusy();
+ /* Wait until the NVM bus is ready again */
+ if (!(PDITarget_WaitWhileNVMBusBusy()))
+ return false;
+
+ return true;
}
#endif
diff --git a/Projects/AVRISP/Lib/NVMTarget.h b/Projects/AVRISP/Lib/NVMTarget.h index b43967f99..dae55ed12 100644 --- a/Projects/AVRISP/Lib/NVMTarget.h +++ b/Projects/AVRISP/Lib/NVMTarget.h @@ -106,11 +106,11 @@ #define NVM_CMD_READEEPROM 0x06
/* Function Prototypes: */
- void NVMTarget_SendNVMRegAddress(uint8_t Register);
- void NVMTarget_SendAddress(uint32_t AbsoluteAddress);
- bool NVMTarget_WaitWhileNVMControllerBusy(void);
- uint32_t NVMTarget_GetMemoryCRC(uint8_t CRCCommand);
- void NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize);
- void NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address);
+ void NVMTarget_SendNVMRegAddress(uint8_t Register);
+ void NVMTarget_SendAddress(uint32_t AbsoluteAddress);
+ bool NVMTarget_WaitWhileNVMControllerBusy(void);
+ bool NVMTarget_GetMemoryCRC(uint8_t CRCCommand, uint32_t* CRCDest);
+ bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize);
+ bool NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address);
#endif
diff --git a/Projects/AVRISP/Lib/PDIProtocol.c b/Projects/AVRISP/Lib/PDIProtocol.c index 24ce26cb6..46d6dd417 100644 --- a/Projects/AVRISP/Lib/PDIProtocol.c +++ b/Projects/AVRISP/Lib/PDIProtocol.c @@ -181,7 +181,8 @@ static void PDIProtocol_Erase(void) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_USERSIG)
EraseCommand = NVM_CMD_ERASEUSERSIG;
- NVMTarget_EraseMemory(EraseCommand, Erase_XPROG_Params.Address);
+ if (!(NVMTarget_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
+ ReturnStatus = XPRG_ERR_TIMEOUT;
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_ERASE);
@@ -241,7 +242,9 @@ static void PDIProtocol_ReadMemory(void) Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
uint8_t ReadBuffer[ReadMemory_XPROG_Params.Length];
- NVMTarget_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length);
+
+ if (!(NVMTarget_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
+ ReturnStatus = XPRG_ERR_TIMEOUT;
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
@@ -279,7 +282,8 @@ static void PDIProtocol_ReadCRC(void) else
CRCCommand = NVM_CMD_FLASHCRC;
- MemoryCRC = NVMTarget_GetMemoryCRC(CRCCommand);
+ if (!(NVMTarget_GetMemoryCRC(CRCCommand, &MemoryCRC)))
+ ReturnStatus = XPRG_ERR_TIMEOUT;
Endpoint_Write_Byte(CMD_XPROG);
Endpoint_Write_Byte(XPRG_CMD_CRC);
diff --git a/Projects/AVRISP/Lib/PDITarget.c b/Projects/AVRISP/Lib/PDITarget.c index c774fdab8..28df55021 100644 --- a/Projects/AVRISP/Lib/PDITarget.c +++ b/Projects/AVRISP/Lib/PDITarget.c @@ -102,7 +102,7 @@ void PDITarget_EnableTargetPDI(void) /* Set up the synchronous USART for XMEGA communications -
8 data bits, even parity, 2 stop bits */
- UBRR1 = 10;
+ UBRR1 = (F_CPU / 1000000UL);
UCSR1B = (1 << TXEN1);
UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
@@ -167,15 +167,16 @@ void PDITarget_SendByte(uint8_t Byte) PORTD |= (1 << 3);
DDRD |= (1 << 3);
- UCSR1B &= ~(1 << RXEN1);
UCSR1B |= (1 << TXEN1);
+ UCSR1B &= ~(1 << RXEN1);
IsSending = true;
}
/* Wait until there is space in the hardware Tx buffer before writing */
while (!(UCSR1A & (1 << UDRE1)));
- UDR1 = Byte;
+ UCSR1A |= (1 << TXC1);
+ UDR1 = Byte;
#else
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
|