diff options
Diffstat (limited to 'Projects/AVRISP/AVRISP.txt')
-rw-r--r-- | Projects/AVRISP/AVRISP.txt | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt index 2de8dd2e7..35cf93770 100644 --- a/Projects/AVRISP/AVRISP.txt +++ b/Projects/AVRISP/AVRISP.txt @@ -6,9 +6,9 @@ /** \mainpage AVRISP MKII Programmer Project
*
- * \section SSec_Compat Demo Compatibility:
+ * \section SSec_Compat Project Compatibility:
*
- * The following list indicates what microcontrollers are compatible with this demo.
+ * The following list indicates what microcontrollers are compatible with this project.
*
* - Series 7 USB AVRs
* - Series 6 USB AVRs
@@ -17,7 +17,7 @@ *
* \section SSec_Info USB Information:
*
- * The following table gives a rundown of the USB utilization of this demo.
+ * The following table gives a rundown of the USB utilization of this project.
*
* <table>
* <tr>
@@ -67,7 +67,7 @@ * While this application can be compiled for USB AVRs with as little as 8KB of FLASH, for full functionality 16KB or more
* of FLASH is required. On 8KB devices, either ISP or PDI programming support can be disabled to reduce program size.
*
- *
+ * \section Sec_ISP ISP Connections
* Connections to the device for SPI programming (when enabled):
*
* <table>
@@ -111,7 +111,7 @@ * <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>
*
- *
+ * \section Sec_PDI PDI Connections
* Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):
*
* <table>
@@ -152,12 +152,12 @@ * </tr>
* </table>
*
- * <b><sup>1</sup></b> When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
- * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.
+ * <b><sup>1</sup></b> <i>When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
+ * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>
*
* \section SSec_Options Project Options
*
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
*
* <table>
* <tr>
|