diff options
Diffstat (limited to 'LUFA')
-rw-r--r-- | LUFA/Common/Common.h | 8 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/Device.h | 3 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/DeviceStandardReq.c | 5 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/DeviceStandardReq.h | 7 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/EndpointStream.c | 172 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/EndpointStream.h | 34 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/PipeStream.c | 110 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/PipeStream.h | 16 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/UC3/USBController_UC3.h | 4 | ||||
-rw-r--r-- | LUFA/ManPages/ConfiguringApps.txt | 54 |
10 files changed, 240 insertions, 173 deletions
diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h index b7d564aa3..42662ef39 100644 --- a/LUFA/Common/Common.h +++ b/LUFA/Common/Common.h @@ -80,7 +80,11 @@ typedef uint8_t uint_reg_t; - #define ARCH_LITTLE_ENDIAN + #define ARCH_HAS_EEPROM_ADDRESS_SPACE + #define ARCH_HAS_FLASH_ADDRESS_SPACE + #define ARCH_HAS_MULTI_ADDRESS_SPACE + #define ARCH_LITTLE_ENDIAN + #include "Endianness.h" #elif (ARCH == ARCH_UC3) #include <avr32/io.h> @@ -94,12 +98,12 @@ #define _delay_ms(x) #define memcmp_P(...) memcmp(__VA_ARGS__) #define memcpy_P(...) memcpy(__VA_ARGS__) - #define USE_RAM_DESCRIPTORS // ================================================== typedef uint32_t uint_reg_t; #define ARCH_BIG_ENDIAN + #include "Endianness.h" #else #error Unknown device architecture specified. diff --git a/LUFA/Drivers/USB/Core/Device.h b/LUFA/Drivers/USB/Core/Device.h index bbc1b46ca..be3dfd118 100644 --- a/LUFA/Drivers/USB/Core/Device.h +++ b/LUFA/Drivers/USB/Core/Device.h @@ -121,7 +121,8 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
const void** const DescriptorAddress
- #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS)
+ #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__)) && \
+ !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
, uint8_t* MemoryAddressSpace
#endif
) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
diff --git a/LUFA/Drivers/USB/Core/DeviceStandardReq.c b/LUFA/Drivers/USB/Core/DeviceStandardReq.c index 2ac6c0a54..f6bedda5f 100644 --- a/LUFA/Drivers/USB/Core/DeviceStandardReq.c +++ b/LUFA/Drivers/USB/Core/DeviceStandardReq.c @@ -238,7 +238,8 @@ static void USB_Device_GetDescriptor(void) if ((DescriptorSize = CALLBACK_USB_GetDescriptor(USB_ControlRequest.wValue, USB_ControlRequest.wIndex, &DescriptorPointer - #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) , &DescriptorAddressSpace #endif )) == NO_DESCRIPTOR) @@ -248,7 +249,7 @@ static void USB_Device_GetDescriptor(void) Endpoint_ClearSETUP(); - #if defined(USE_RAM_DESCRIPTORS) + #if defined(USE_RAM_DESCRIPTORS) || !defined(ARCH_HAS_MULTI_ADDRESS_SPACE) Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize); #elif defined(USE_EEPROM_DESCRIPTORS) Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize); diff --git a/LUFA/Drivers/USB/Core/DeviceStandardReq.h b/LUFA/Drivers/USB/Core/DeviceStandardReq.h index dbf1ca4a7..26a55a4e4 100644 --- a/LUFA/Drivers/USB/Core/DeviceStandardReq.h +++ b/LUFA/Drivers/USB/Core/DeviceStandardReq.h @@ -61,13 +61,8 @@ #endif /* Public Interface - May be used in end-application: */ - /* Macros: */ - #if defined(USE_SINGLE_DEVICE_CONFIGURATION) - #define FIXED_NUM_CONFIGURATIONS 1 - #endif - /* Enums: */ - #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__) /** Enum for the possible descriptor memory spaces, for the \c MemoryAddressSpace parameter of the * \ref CALLBACK_USB_GetDescriptor() function. This can be used when none of the \c USE_*_DESCRIPTORS * compile time options are used, to indicate in which memory space the descriptor is stored. diff --git a/LUFA/Drivers/USB/Core/EndpointStream.c b/LUFA/Drivers/USB/Core/EndpointStream.c index 974af682c..893a6ff35 100644 --- a/LUFA/Drivers/USB/Core/EndpointStream.c +++ b/LUFA/Drivers/USB/Core/EndpointStream.c @@ -122,22 +122,6 @@ uint8_t Endpoint_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
#include "Template/Template_Endpoint_RW.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_RW.c"
-
#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
#define TEMPLATE_BUFFER_TYPE const void*
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
@@ -146,22 +130,6 @@ uint8_t Endpoint_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
#include "Template/Template_Endpoint_RW.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_RW.c"
-
#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
#define TEMPLATE_BUFFER_TYPE void*
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
@@ -170,14 +138,6 @@ uint8_t Endpoint_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_RW.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
-#include "Template/Template_Endpoint_RW.c"
-
#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
#define TEMPLATE_BUFFER_TYPE void*
#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
@@ -186,13 +146,57 @@ uint8_t Endpoint_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_RW.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
-#include "Template/Template_Endpoint_RW.c"
+#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_RW.c"
+#endif
+
+#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
+ #define TEMPLATE_BUFFER_TYPE void*
+ #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+ #include "Template/Template_Endpoint_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
+ #define TEMPLATE_BUFFER_TYPE void*
+ #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+ #include "Template/Template_Endpoint_RW.c"
+#endif
#endif
@@ -202,58 +206,62 @@ uint8_t Endpoint_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
#include "Template/Template_Endpoint_Control_W.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_Control_W.c"
-
#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
#include "Template/Template_Endpoint_Control_W.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Endpoint_Control_W.c"
-
#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
#define TEMPLATE_BUFFER_OFFSET(Length) 0
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_Control_R.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
-#include "Template/Template_Endpoint_Control_R.c"
-
#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
#include "Template/Template_Endpoint_Control_R.c"
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
-#include "Template/Template_Endpoint_Control_R.c"
+#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_Control_W.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_Control_W.c"
+#endif
+
+#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_Control_W.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+ #include "Template/Template_Endpoint_Control_W.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+ #include "Template/Template_Endpoint_Control_R.c"
+
+ #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+ #include "Template/Template_Endpoint_Control_R.c"
+#endif
#endif diff --git a/LUFA/Drivers/USB/Core/EndpointStream.h b/LUFA/Drivers/USB/Core/EndpointStream.h index 02a348347..b4454a330 100644 --- a/LUFA/Drivers/USB/Core/EndpointStream.h +++ b/LUFA/Drivers/USB/Core/EndpointStream.h @@ -467,8 +467,11 @@ /** \name Stream functions for EEPROM source/destination data */
//@{
+ #if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) || defined(__DOXYGEN__)
/** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
@@ -482,6 +485,8 @@ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
@@ -495,6 +500,8 @@ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
@@ -508,6 +515,8 @@ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
@@ -526,6 +535,9 @@ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
+ * \n\n
+ *
+ * \note This function is not available on all architectures.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
@@ -545,6 +557,9 @@ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
+ * \n\n
+ *
+ * \note This function is not available on all architectures.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
@@ -564,6 +579,9 @@ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
+ * \n\n
+ *
+ * \note This function is not available on all architectures.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
@@ -583,6 +601,9 @@ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
+ * \n\n
+ *
+ * \note This function is not available on all architectures.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
@@ -594,15 +615,19 @@ */
uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ #endif
//@}
/** \name Stream functions for PROGMEM source/destination data */
//@{
+ #if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) || defined(__DOXYGEN__)
/** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
*
* \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
@@ -618,6 +643,8 @@ *
* \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
@@ -638,6 +665,9 @@ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
+ * \n\n
+ *
+ * \note This function is not available on all architectures.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
@@ -659,6 +689,9 @@ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
+ * \n\n
+ *
+ * \note This function is not available on all architectures.
*
* \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
@@ -670,6 +703,7 @@ */
uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ #endif
//@}
/* Disable C linkage for C++ Compilers: */
diff --git a/LUFA/Drivers/USB/Core/PipeStream.c b/LUFA/Drivers/USB/Core/PipeStream.c index 4465471a8..66babf4a1 100644 --- a/LUFA/Drivers/USB/Core/PipeStream.c +++ b/LUFA/Drivers/USB/Core/PipeStream.c @@ -131,24 +131,6 @@ uint8_t Pipe_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*BufferPtr)
#include "Template/Template_Pipe_RW.c"
-#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
#define TEMPLATE_BUFFER_TYPE const void*
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
@@ -158,24 +140,6 @@ uint8_t Pipe_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*BufferPtr)
#include "Template/Template_Pipe_RW.c"
-#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
#define TEMPLATE_BUFFER_TYPE void*
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
@@ -185,15 +149,6 @@ uint8_t Pipe_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_Byte()
#include "Template/Template_Pipe_RW.c"
-#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_Byte())
-#include "Template/Template_Pipe_RW.c"
-
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
#define TEMPLATE_BUFFER_TYPE void*
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
@@ -203,14 +158,63 @@ uint8_t Pipe_Null_Stream(uint16_t Length, #define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_Byte()
#include "Template/Template_Pipe_RW.c"
-#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_Byte())
-#include "Template/Template_Pipe_RW.c"
+#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
+ #define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+ #define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr))
+ #include "Template/Template_Pipe_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+ #define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr))
+ #include "Template/Template_Pipe_RW.c"
+#endif
+
+#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
+ #define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+ #define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr))
+ #include "Template/Template_Pipe_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
+ #define TEMPLATE_BUFFER_TYPE const void*
+ #define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+ #define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr))
+ #include "Template/Template_Pipe_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
+ #define TEMPLATE_BUFFER_TYPE void*
+ #define TEMPLATE_TOKEN PIPE_TOKEN_IN
+ #define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+ #define TEMPLATE_BUFFER_OFFSET(Length) 0
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_Byte())
+ #include "Template/Template_Pipe_RW.c"
+
+ #define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
+ #define TEMPLATE_BUFFER_TYPE void*
+ #define TEMPLATE_TOKEN PIPE_TOKEN_IN
+ #define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+ #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+ #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+ #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_Byte())
+ #include "Template/Template_Pipe_RW.c"
+#endif
#endif
diff --git a/LUFA/Drivers/USB/Core/PipeStream.h b/LUFA/Drivers/USB/Core/PipeStream.h index c579631dc..c914fc149 100644 --- a/LUFA/Drivers/USB/Core/PipeStream.h +++ b/LUFA/Drivers/USB/Core/PipeStream.h @@ -363,8 +363,11 @@ /** \name Stream functions for EEPROM source/destination data */
//@{
+ #if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) || defined(__DOXYGEN__)
/** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
@@ -378,6 +381,8 @@ /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
@@ -391,6 +396,8 @@ /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
@@ -404,6 +411,8 @@ /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE().
*
+ * \note This function is not available on all architectures.
+ *
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
@@ -414,15 +423,19 @@ uint8_t Pipe_Read_EStream_BE(void* const Buffer,
uint16_t Length,
uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+ #endif
//@}
/** \name Stream functions for PROGMEM source/destination data */
//@{
+ #if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) || defined(__DOXYGEN__)
/** FLASH buffer source version of \ref Pipe_Write_Stream_LE().
*
* \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
@@ -438,6 +451,8 @@ *
* \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
*
+ * \note This function is not available on all architectures.
+ *
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
@@ -448,6 +463,7 @@ uint8_t Pipe_Write_PStream_BE(const void* const Buffer,
uint16_t Length,
uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+ #endif
//@}
/* Disable C linkage for C++ Compilers: */
diff --git a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h index 8b29628ed..da32b3ed4 100644 --- a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h @@ -80,6 +80,10 @@ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
#endif
+ #if !defined(F_USB)
+ #error F_USB is not defined. You must define F_USB to the frequency of the clock input to the USB module.
+ #endif
+
/* Public Interface - May be used in end-application: */
/* Macros: */
/** \name USB Controller Option Masks */
diff --git a/LUFA/ManPages/ConfiguringApps.txt b/LUFA/ManPages/ConfiguringApps.txt index b56341ee2..c4a1ce224 100644 --- a/LUFA/ManPages/ConfiguringApps.txt +++ b/LUFA/ManPages/ConfiguringApps.txt @@ -6,10 +6,10 @@ /** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects * - * If the target AVR model, clock speed, board or other settings are different from the current settings, they must be changed - * and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project - * configuration options are located in the "makefile" build script inside each LUFA application's folder, however some - * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in one or + * If the target microcontroller model, architecture, clock speed, board or other settings are different from the current + * settings, they must be changed and the project recompiled from the source code before being programmed into the microcontroller. + * Most project configuration options are located in the "makefile" build script inside each LUFA application's folder, however + * some demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in one or * more of the source files of the project. See each project's individual documentation for application-specific configuration * values. * @@ -20,10 +20,11 @@ * Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For * each application, the important variables which should be altered are: * - * - <b>MCU</b>, the target AVR processor + * - <b>MCU</b>, the target processor model + * - <b>ARCH</b>, the target microcontroller architecture * - <b>BOARD</b>, the target board hardware - * - <b>F_USB</b>, the target raw master clock frequency, before any prescaling is performed - * - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling + * - <b>F_CPU</b>, the target CPU master clock frequency, after any prescaling + * - <b>F_USB</b>, the target raw input clock to the USB module of the processor * - <b>CDEFS</b>, the C preprocessor defines which configure options the source code * - <b>LUFA_PATH</b>, the path to the LUFA library source code * - <b>LUFA_OPTS</b>, the compile time LUFA options which configure the library features @@ -31,14 +32,21 @@ * These values should be changed to reflect the build hardware. * * \section Sec_MCU The MCU Parameter - * This parameter indicates the target AVR model for the compiled application. This should be set to the model of the target AVR - * (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the - * USB AVR models, as they may make use of peripherals or modes only present in some devices. + * This parameter indicates the target microcontroller model for the compiled application. This should be set to the model of the target + * microcontroller (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the + * microcontroller models and architectures, as they may make use of peripherals or modes only present in some devices. * * For supported processor models, see \ref Page_DeviceSupport. * + * \section Sec_ARCH The ARCH Parameter + * This parameter indicates the target microcontroller architecture the library is to be compiled for. Different microcontroller + * architectures require different source files to be compiled into the final binary, and so this option must be set to the correct + * architecture for the selected platform. + * + * For supported processor architectures, see \ref Page_DeviceSupport. + * * \section Sec_BOARD The BOARD Parameter - * This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific, + * This parameter indicates the target board hardware for the compiled application. Some LUFA library drivers are board-specific, * such as the LED driver, and the library needs to know the layout of the target board. If you are using one of the board models listed * on the main library page, change this parameter to the board name in all UPPER-case. * @@ -50,21 +58,13 @@ * * For boards with built in hardware driver support within the LUFA library, see \ref Page_DeviceSupport. * - * \section Sec_F_USB The F_USB Parameter - * This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the - * USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the - * clock input. The PLL then feeds the USB and other sections of the AVR with the correct upscaled frequencies required for those sections to function. - * - * <b>Note that this value does not actually *alter* the AVR's input clock frequency</b>, it is just a way to indicate to the library the clock frequency - * of the AVR as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more - * library components will occur. - * * \section Sec_F_CPU The F_CPU Parameter - * This parameter indicates the target AVR's master CPU clock frequency, in Hz. + * This parameter indicates the target microcontroller's main CPU clock frequency, in Hz. This is used by many libraries (and applications) for + * timing related purposes, and should reflect the actual CPU speed after any prescaling or adjustments are performed. * - * <b>Note that this value does not actually *alter* the AVR's CPU clock frequency</b>, it is just a way to indicate to the library the clock frequency - * of the AVR core as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more - * library components will occur. + * \section Sec_F_USB The F_USB Parameter + * This parameter indicates the raw input clock frequency to the USB module within the microcontroller in Hz. This may be very different on some platforms + * to the main CPU clock or other peripheral/bus clocks. * * \section Sec_CDEFS The CDEFS Parameter * Many applications have features which can be controlled by the defining of specially named preprocessor tokens at the point of compilation - for example, @@ -82,8 +82,8 @@ * \section Sec_LUFA_OPTS The LUFA_OPTS Parameter * This value is similar to the CDEFS parameter listed elsewhere -- indeed, it is simply a convenient place to group LUFA related tokens away from the * application's compile time tokens. Normally, these options do not need to be altered to allow an application to compile and run correctly on a - * different board or AVR to the current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR - * model and cannot be made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both), - * the USB interface speed (Low or Full speed) and other LUFA configuration options can be set here - see \ref Page_TokenSummary documentation for details + * different board or microcontroller to the current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen + * microcontroller model and cannot be made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode + * (device, host or both), the USB interface speed and other LUFA configuration options can be set here - see \ref Page_TokenSummary documentation for details * on the available LUFA compile time configuration options. */ |