diff options
Diffstat (limited to 'LUFA/Drivers/USB')
-rw-r--r-- | LUFA/Drivers/USB/Class/Device/Audio.h | 32 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Device/CDC.h | 24 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Device/MIDI.h | 8 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/CDC.h | 20 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/HID.h | 19 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/MIDI.h | 8 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/MassStorage.h | 24 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/Printer.h | 4 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/RNDIS.h | 12 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/StillImage.h | 40 | ||||
-rw-r--r-- | LUFA/Drivers/USB/LowLevel/Endpoint.h | 18 | ||||
-rw-r--r-- | LUFA/Drivers/USB/LowLevel/Pipe.h | 10 |
12 files changed, 107 insertions, 112 deletions
diff --git a/LUFA/Drivers/USB/Class/Device/Audio.h b/LUFA/Drivers/USB/Class/Device/Audio.h index b76abf663..73c293469 100644 --- a/LUFA/Drivers/USB/Class/Device/Audio.h +++ b/LUFA/Drivers/USB/Class/Device/Audio.h @@ -145,8 +145,8 @@ /** Determines if the given audio interface is ready for a sample to be read from it, and selects the streaming * OUT endpoint ready for reading. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * @@ -166,8 +166,8 @@ /** Determines if the given audio interface is ready to accept the next sample to be written to it, and selects * the streaming IN endpoint ready for writing. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * @@ -186,8 +186,8 @@ /** Reads the next 8-bit audio sample from the current audio interface. * - * \note This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure - * ensure the correct endpoint is selected and ready for data. + * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure + * ensure the correct endpoint is selected and ready for data. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * @@ -211,8 +211,8 @@ /** Reads the next 16-bit audio sample from the current audio interface. * - * \note This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure - * that the correct endpoint is selected and ready for data. + * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure + * that the correct endpoint is selected and ready for data. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * @@ -236,8 +236,8 @@ /** Reads the next 24-bit audio sample from the current audio interface. * - * \note This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure - * that the correct endpoint is selected and ready for data. + * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure + * that the correct endpoint is selected and ready for data. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * @@ -261,8 +261,8 @@ /** Writes the next 8-bit audio sample to the current audio interface. * - * \note This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to - * ensure that the correct endpoint is selected and ready for data. + * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to + * ensure that the correct endpoint is selected and ready for data. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * \param[in] Sample Signed 8-bit audio sample @@ -280,8 +280,8 @@ /** Writes the next 16-bit audio sample to the current audio interface. * - * \note This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to - * ensure that the correct endpoint is selected and ready for data. + * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to + * ensure that the correct endpoint is selected and ready for data. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * \param[in] Sample Signed 16-bit audio sample @@ -299,8 +299,8 @@ /** Writes the next 24-bit audio sample to the current audio interface. * - * \note This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to - * ensure that the correct endpoint is selected and ready for data. + * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to + * ensure that the correct endpoint is selected and ready for data. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state * \param[in] Sample Signed 24-bit audio sample diff --git a/LUFA/Drivers/USB/Class/Device/CDC.h b/LUFA/Drivers/USB/Class/Device/CDC.h index 23b7b5c40..3bd9c9da3 100644 --- a/LUFA/Drivers/USB/Class/Device/CDC.h +++ b/LUFA/Drivers/USB/Class/Device/CDC.h @@ -203,8 +203,8 @@ * \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be * packed into a single endpoint packet, increasing data throughput. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state * \param[in] Data Pointer to the string to send to the host @@ -220,8 +220,8 @@ * \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be * packed into a single endpoint packet, increasing data throughput. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state * \param[in] Data Byte of data to send to the host @@ -232,8 +232,8 @@ /** Determines the number of bytes received by the CDC interface from the host, waiting to be read. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state * @@ -245,8 +245,8 @@ * returns 0. The \ref CDC_Device_BytesReceived() function should be queried before data is received to ensure that no data * underflow occurs. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state * @@ -256,8 +256,8 @@ /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state * @@ -270,8 +270,8 @@ * until they are cleared via a second notification. This should be called each time the CDC class driver's * ControlLineStates.DeviceToHost value is updated to push the new states to the USB host. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or + * the call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state */ diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h index d9b67e275..20a4062bc 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDI.h +++ b/LUFA/Drivers/USB/Class/Device/MIDI.h @@ -116,8 +116,8 @@ * endpoint bank until either the endpoint bank is full, or \ref MIDI_Device_Flush() is called. This allows for multiple * MIDI events to be packed into a single endpoint packet, increasing data throughput. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state * \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send @@ -140,8 +140,8 @@ /** Receives a MIDI event packet from the host. Events are unpacked from the endpoint, thus if the endpoint bank contains * multiple MIDI events from the host in the one packet, multiple calls to this function will return each individual event. * - * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or - * the call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed diff --git a/LUFA/Drivers/USB/Class/Host/CDC.h b/LUFA/Drivers/USB/Class/Host/CDC.h index 0f8807ed2..ece23c546 100644 --- a/LUFA/Drivers/USB/Class/Host/CDC.h +++ b/LUFA/Drivers/USB/Class/Host/CDC.h @@ -205,8 +205,8 @@ * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be * packed into a single pipe packet, increasing data throughput. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state * \param[in] Data Pointer to the string to send to the device @@ -222,8 +222,8 @@ * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be * packed into a single pipe packet, increasing data throughput. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state * \param[in] Data Byte of data to send to the device @@ -234,8 +234,8 @@ /** Determines the number of bytes received by the CDC interface from the device, waiting to be read. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state * @@ -247,8 +247,8 @@ * returns 0. The \ref CDC_Host_BytesReceived() function should be queried before data is received to ensure that no data * underflow occurs. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state * @@ -258,8 +258,8 @@ /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state * diff --git a/LUFA/Drivers/USB/Class/Host/HID.h b/LUFA/Drivers/USB/Class/Host/HID.h index 1988e5d33..82ff3baca 100644 --- a/LUFA/Drivers/USB/Class/Host/HID.h +++ b/LUFA/Drivers/USB/Class/Host/HID.h @@ -167,9 +167,8 @@ /** Receives a HID IN report from the attached HID device, when a report has been received on the HID IN Data pipe. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. - * \n\n + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \note The destination buffer should be large enough to accommodate the largest report that the attached device * can generate. @@ -185,9 +184,8 @@ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY) /** Receives a HID IN report from the attached device, by the report ID. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. - * \n\n + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable. * @@ -204,9 +202,8 @@ /** Sends an OUT or FEATURE report to the currently attached HID device, using the device's OUT pipe if available, * or the device's Control pipe if not. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. - * \n\n + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, the ReportID parameter is removed * from the parameter list of this function. @@ -233,8 +230,8 @@ /** Determines if a HID IN report has been received from the attached device on the data IN pipe. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state * diff --git a/LUFA/Drivers/USB/Class/Host/MIDI.h b/LUFA/Drivers/USB/Class/Host/MIDI.h index f7898709f..5ac1becb8 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDI.h +++ b/LUFA/Drivers/USB/Class/Host/MIDI.h @@ -130,8 +130,8 @@ /** Sends a MIDI event packet to the device. If no device is connected, the event packet is discarded. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state * \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send @@ -154,8 +154,8 @@ /** Receives a MIDI event packet from the device. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed diff --git a/LUFA/Drivers/USB/Class/Host/MassStorage.h b/LUFA/Drivers/USB/Class/Host/MassStorage.h index 6c1f7f67f..9b67c7fc4 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorage.h +++ b/LUFA/Drivers/USB/Class/Host/MassStorage.h @@ -174,8 +174,8 @@ /** Retrieves the Mass Storage device's inquiry data for the specified LUN, indicating the device characteristics and * properties. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state * \param[in] LUNIndex LUN index within the device the command is being issued to @@ -199,8 +199,8 @@ /** Retrieves the total capacity of the attached USB Mass Storage device, in blocks, and block size. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state * \param[in] LUNIndex LUN index within the device the command is being issued to @@ -215,8 +215,8 @@ /** Retrieves the device sense data, indicating the current device state and error codes for the previously * issued command. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state * \param[in] LUNIndex LUN index within the device the command is being issued to @@ -231,8 +231,8 @@ /** Issues a PREVENT MEDIUM REMOVAL command, to logically (or, depending on the type of device, physically) lock * the device from removal so that blocks of data on the medium can be read or altered. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state * \param[in] LUNIndex LUN index within the device the command is being issued to @@ -245,8 +245,8 @@ /** Reads blocks of data from the attached Mass Storage device's medium. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state * \param[in] LUNIndex LUN index within the device the command is being issued to @@ -263,8 +263,8 @@ /** Writes blocks of data to the attached Mass Storage device's medium. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state * \param[in] LUNIndex LUN index within the device the command is being issued to diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h index 78b3f26b0..89f229975 100644 --- a/LUFA/Drivers/USB/Class/Host/Printer.h +++ b/LUFA/Drivers/USB/Class/Host/Printer.h @@ -161,8 +161,8 @@ * printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see * \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state * \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h index 111d60b5c..f39be799f 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h @@ -195,8 +195,8 @@ /** Determines if a packet is currently waiting for the host to read in and process. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state * @@ -207,8 +207,8 @@ /** Retrieves the next pending packet from the device, discarding the remainder of the RNDIS packet header to leave * only the packet contents for processing by the host in the nominated buffer. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state * \param[out] Buffer Pointer to a buffer where the packer data is to be written to @@ -221,8 +221,8 @@ /** Sends the given packet to the attached RNDIS device, after adding a RNDIS packet message header. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state * \param[in] Buffer Pointer to a buffer where the packer data is to be read from diff --git a/LUFA/Drivers/USB/Class/Host/StillImage.h b/LUFA/Drivers/USB/Class/Host/StillImage.h index 1feddb882..b737e3672 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImage.h +++ b/LUFA/Drivers/USB/Class/Host/StillImage.h @@ -146,8 +146,8 @@ /** Opens a new PIMA session with the attached device. This should be used before any session-orientated PIMA commands * are issued to the device. Only one session can be open at the one time. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * @@ -159,8 +159,8 @@ /** Closes an already opened PIMA session with the attached device. This should be used after all session-orientated * PIMA commands have been issued to the device. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * @@ -172,8 +172,8 @@ /** Sends a raw PIMA block header to the device, filling out the transaction ID automatically. This can be used to send * arbitrary PIMA blocks to the device with or without parameters. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent @@ -187,8 +187,8 @@ /** Receives a raw PIMA block header to the device. This can be used to receive arbitrary PIMA blocks from the device with * or without parameters. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored @@ -201,8 +201,8 @@ /** Sends a given PIMA command to the attached device, filling out the PIMA command header's Transaction ID automatically. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * \param[in] Operation PIMA operation code to issue to the device @@ -218,8 +218,8 @@ /** Receives and checks a response block from the attached PIMA device, once a command has been issued and all data * associated with the command has been transferred. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * @@ -230,8 +230,8 @@ /** Indicates if the device has issued a PIMA event block to the host via the asynchronous events pipe. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * @@ -241,8 +241,8 @@ /** Receives an asynchronous event block from the device via the asynchronous events pipe. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored @@ -257,8 +257,8 @@ /** Sends arbitrary data to the attached device, for use in the data phase of PIMA commands which require data * transfer beyond the regular PIMA command block parameters. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * \param[in] Buffer Pointer to a buffer where the data to send has been stored @@ -272,8 +272,8 @@ /** Receives arbitrary data from the attached device, for use in the data phase of PIMA commands which require data * transfer beyond the regular PIMA command block parameters. * - * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the - * call will fail. + * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the + * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state * \param[out] Buffer Pointer to a buffer where the received data is to be stored diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index 760a37787..60e1018f6 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -756,8 +756,8 @@ * * The banking mode may be either \ref ENDPOINT_BANK_SINGLE or \ref ENDPOINT_BANK_DOUBLE. * - * \note The default control endpoint does not have to be manually configured, as it is automatically - * configured by the library internally. + * \note The default control endpoint should not be manually configured by the user application, as + * it is automatically configured by the library internally. * \n\n * * \note This routine will select the specified endpoint, and the endpoint will remain selected @@ -844,7 +844,7 @@ /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE(). * - * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. * * \ingroup Group_EndpointStreamRW * @@ -893,7 +893,7 @@ /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE(). * - * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. * * \ingroup Group_EndpointStreamRW * @@ -1020,13 +1020,12 @@ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE(). * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. * \n\n * - * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. - * \n\n - * * \note This routine should only be used on CONTROL type endpoints. * * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained @@ -1086,13 +1085,12 @@ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE(). * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. * \n\n * - * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. - * \n\n - * * \note This routine should only be used on CONTROL type endpoints. * * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index b4b40cacf..7283fc820 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -231,7 +231,7 @@ /** Enables the currently selected pipe so that data can be sent and received through it to and from * an attached device. * - * \note Pipes must first be configured properly via \ref Pipe_ConfigurePipe(). + * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe(). */ static inline void Pipe_EnablePipe(void); @@ -799,8 +799,8 @@ * numbers of IN requests without automatic freezing - this can be overridden by a call to * \ref Pipe_SetFiniteINRequests(). * - * \note The default control pipe does not have to be manually configured, as it is automatically - * configured by the library internally. + * \note The default control pipe should not be manually configured by the user application, as it + * is automatically configured by the library internally. * \n\n * * \note This routine will select the specified pipe, and the pipe will remain selected once the @@ -889,7 +889,7 @@ /** FLASH buffer source version of \ref Pipe_Write_Stream_LE(). * - * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. * * \ingroup Group_PipeStreamRW * @@ -938,7 +938,7 @@ /** FLASH buffer source version of \ref Pipe_Write_Stream_BE(). * - * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. * * \ingroup Group_PipeStreamRW * |