aboutsummaryrefslogtreecommitdiffstats
path: root/LUFA/Drivers/USB/LowLevel
diff options
context:
space:
mode:
Diffstat (limited to 'LUFA/Drivers/USB/LowLevel')
-rw-r--r--LUFA/Drivers/USB/LowLevel/Device.h2
-rw-r--r--LUFA/Drivers/USB/LowLevel/Endpoint.h46
-rw-r--r--LUFA/Drivers/USB/LowLevel/Host.c4
-rw-r--r--LUFA/Drivers/USB/LowLevel/Host.h6
-rw-r--r--LUFA/Drivers/USB/LowLevel/HostChapter9.h2
-rw-r--r--LUFA/Drivers/USB/LowLevel/OTG.h2
-rw-r--r--LUFA/Drivers/USB/LowLevel/Pipe.h44
7 files changed, 53 insertions, 53 deletions
diff --git a/LUFA/Drivers/USB/LowLevel/Device.h b/LUFA/Drivers/USB/LowLevel/Device.h
index 187fccb4a..c6e5f7f5a 100644
--- a/LUFA/Drivers/USB/LowLevel/Device.h
+++ b/LUFA/Drivers/USB/LowLevel/Device.h
@@ -94,7 +94,7 @@
/** Indicates if the device is currently suspended by the host. While suspended, the device is
* to enter a low power state until resumed by the host. While suspended no USB traffic to or
- * from the device can ocurr (except for Remote Wakeup requests).
+ * from the device can occur (except for Remote Wakeup requests).
*
* This macro returns true if the USB communications have been suspended by the host, false
* otherwise.
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h
index c6aece708..8c22bb7f7 100644
--- a/LUFA/Drivers/USB/LowLevel/Endpoint.h
+++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h
@@ -32,7 +32,7 @@
*
* Functions, macros and enums related to endpoint management when in USB Device mode. This
* module contains the endpoint management macros, as well as endpoint interrupt and data
- * send/recieve functions for various datatypes.
+ * send/recieve functions for various data types.
*/
#ifndef __ENDPOINT_H__
@@ -210,7 +210,7 @@
/** Returns true if the currently selected endpoint may be read from (if data is waiting in the endpoint
* bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an
- * IN direction). This function will return false if an error has occured in the endpoint, or if
+ * IN direction). This function will return false if an error has occurred in the endpoint, or if
* the endpoint is an OUT direction and no packet has been received, or if the endpoint is an IN
* direction and the endpoint bank is full.
*/
@@ -262,10 +262,10 @@
*/
#define Endpoint_ClearSetupOUT() MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE
- /** Stalls the current endpoint, indicating to the host that a logical problem occured with the
+ /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the
* indicated endpoint and that the current transfer sequence should be aborted. This provides a
* way for devices to indicate invalid commands to the host so that the current transfer can be
- * aborted and the host can begin its own recovery seqeuence.
+ * aborted and the host can begin its own recovery sequence.
*
* The currently selected endpoint remains stalled until either the Endpoint_ClearStall() macro
* is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
@@ -276,7 +276,7 @@
/** Clears the stall on the currently selected endpoint. */
#define Endpoint_ClearStall() MACROS{ UECONX |= (1 << STALLRQC); }MACROE
- /** Returns true if the currently selected endpoint is stalled, false othewise. */
+ /** Returns true if the currently selected endpoint is stalled, false otherwise. */
#define Endpoint_IsStalled() ((UECONX & (1 << STALLRQ)) ? true : false)
/** Resets the data toggle of the currently selected endpoint. */
@@ -552,12 +552,12 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Length Number of bytes to send via the currently selected endpoint.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -576,13 +576,13 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -601,13 +601,13 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -626,13 +626,13 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the destination data buffer to write to.
* \param Length Number of bytes to send via the currently selected endpoint.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -651,13 +651,13 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the destination data buffer to write to.
* \param Length Number of bytes to send via the currently selected endpoint.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -749,27 +749,27 @@
#define Endpoint_Ignore_DWord() Endpoint_Discard_DWord()
/** Alias for Endpoint_Read_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Read_Word() Endpoint_Read_Word_LE()
/** Alias for Endpoint_Write_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Write_Word(Word) Endpoint_Write_Word_LE(Word)
/** Alias for Endpoint_Read_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Read_DWord() Endpoint_Read_DWord_LE()
/** Alias for Endpoint_Write_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Write_DWord(DWord) Endpoint_Write_DWord_LE(DWord)
/** Alias for Endpoint_Read_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Endpoint_Read_Stream(Buffer, Length, Callback) Endpoint_Read_Stream_LE(Buffer, Length, Callback)
@@ -778,7 +778,7 @@
#endif
/** Alias for Endpoint_Write_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Endpoint_Write_Stream(Buffer, Length, Callback) Endpoint_Write_Stream_LE(Buffer, Length, Callback)
@@ -787,12 +787,12 @@
#endif
/** Alias for Endpoint_Read_Control_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Read_Control_Stream(Data, Length) Endpoint_Read_Control_Stream_LE(Data, Length)
/** Alias for Endpoint_Write_Control_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Write_Control_Stream(Data, Length) Endpoint_Write_Control_Stream_LE(Data, Length)
diff --git a/LUFA/Drivers/USB/LowLevel/Host.c b/LUFA/Drivers/USB/LowLevel/Host.c
index 7acbffe71..04b06b3da 100644
--- a/LUFA/Drivers/USB/LowLevel/Host.c
+++ b/LUFA/Drivers/USB/LowLevel/Host.c
@@ -93,8 +93,8 @@ void USB_Host_ResetDevice(void)
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
- /* Workaround for powerless-pullup devices. After a USB bus reset,
- all disconnection interrupts are supressed while a USB frame is
+ /* Workaround for powerless-pull-up devices. After a USB bus reset,
+ all disconnection interrupts are suppressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
diff --git a/LUFA/Drivers/USB/LowLevel/Host.h b/LUFA/Drivers/USB/LowLevel/Host.h
index 5cc215454..427ed85ee 100644
--- a/LUFA/Drivers/USB/LowLevel/Host.h
+++ b/LUFA/Drivers/USB/LowLevel/Host.h
@@ -102,7 +102,7 @@
*/
#define USB_Host_ResumeBus() MACROS{ UHCON |= (1 << SOFEN); }MACROE
- /** Suspends the USB bus, preventing any communications from occuring between the host and attached
+ /** Suspends the USB bus, preventing any communications from occurring between the host and attached
* device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame
* messages to the device.
*/
@@ -192,14 +192,14 @@
* event.
*/
HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed
- * to complete successfuly, due to a timeout or other
+ * to complete successfully, due to a timeout or other
* error.
*/
HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines
* indicating the attachment of a device.
*/
HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to
- * complete successfuly.
+ * complete successfully.
*/
HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to
* configure correctly.
diff --git a/LUFA/Drivers/USB/LowLevel/HostChapter9.h b/LUFA/Drivers/USB/LowLevel/HostChapter9.h
index 1ca4343a9..4e4fa4f08 100644
--- a/LUFA/Drivers/USB/LowLevel/HostChapter9.h
+++ b/LUFA/Drivers/USB/LowLevel/HostChapter9.h
@@ -77,7 +77,7 @@
HOST_SENDCONTROL_DeviceDisconnect = 1, /**< The attached device was disconnected during the
* request transfer.
*/
- HOST_SENDCONTROL_PipeError = 2, /**< An error occured in the pipe while sending the request. */
+ HOST_SENDCONTROL_PipeError = 2, /**< An error occurred in the pipe while sending the request. */
HOST_SENDCONTROL_SetupStalled = 3, /**< The attached device stalled the request, usually
* indicating that the request is unsupported on the device.
*/
diff --git a/LUFA/Drivers/USB/LowLevel/OTG.h b/LUFA/Drivers/USB/LowLevel/OTG.h
index e1a92f1eb..88a955403 100644
--- a/LUFA/Drivers/USB/LowLevel/OTG.h
+++ b/LUFA/Drivers/USB/LowLevel/OTG.h
@@ -82,7 +82,7 @@
* host mode indicates that VBUS should be applied and a session started.
*
* There are two different methods of sending a SRP - either pulses on the VBUS line, or by
- * pulsing the Data + line via the internal pullup resistor. The SRP mode is given as the
+ * pulsing the Data + line via the internal pull-up resistor. The SRP mode is given as the
* "type" parameter, and can be either USB_OTG_SRP_VBUS or USB_OTG_STP_DATA.
*/
#define USB_OTG_DEV_Initiate_SRP(type) MACROS{ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (type | (1 << SRPREQ))); }MACROE
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h
index df3ac7ddc..9a59dbca8 100644
--- a/LUFA/Drivers/USB/LowLevel/Pipe.h
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.h
@@ -32,7 +32,7 @@
*
* Functions, macros and enums related to pipe management when in USB Host mode. This
* module contains the pipe management macros, as well as pipe interrupt and data
- * send/recieve functions for various datatypes.
+ * send/recieve functions for various data types.
*/
#ifndef __PIPE_H__
@@ -303,7 +303,7 @@
/** Returns true if the master pipe error flag is set for the currently selected pipe, indicating that
* some sort of hardware error has occurred on the pipe.
*
- * \see Pipe_GetErrorFlags() macro for information on retreiving the exact error flag.
+ * \see Pipe_GetErrorFlags() macro for information on retrieving the exact error flag.
*/
#define Pipe_IsError() ((UPINTX & (1 << PERRI)) ? true : false)
@@ -311,14 +311,14 @@
* flag for the pipe. */
#define Pipe_ClearErrorFlags() MACROS{ UPERRX = 0; }MACROE
- /** Returns a mask of the hardware error flags which have occured on the currently selected pipe. This
+ /** Returns a mask of the hardware error flags which have occurred on the currently selected pipe. This
* value can then be masked against the PIPE_ERRORFLAG_* masks to determine what error has occurred.
*/
#define Pipe_GetErrorFlags() UPERRX
/** Returns true if the currently selected pipe may be read from (if data is waiting in the pipe
* bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT
- * direction). This function will return false if an error has occured in the pipe, or if the pipe
+ * direction). This function will return false if an error has occurred in the pipe, or if the pipe
* is an IN direction and no packet has been received, or if the pipe is an OUT direction and the
* pipe bank is full.
*/
@@ -358,9 +358,9 @@
#define Pipe_ClearSetupOUT() MACROS{ UPINTX &= ~(1 << TXOUTI); UPINTX &= ~(1 << FIFOCON); }MACROE
/** Returns true if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on
- * the currently selected pipe. This ocurrs when the host sends a packet to the device, but the device
+ * the currently selected pipe. This occurs when the host sends a packet to the device, but the device
* is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been
- * received, it must be cleard using Pipe_ClearNAKReceived() before the previous (or any other) packet
+ * received, it must be cleared using Pipe_ClearNAKReceived() before the previous (or any other) packet
* can be re-sent.
*/
#define Pipe_IsNAKReceived() ((UPINTX & (1 << NAKEDI)) ? true : false)
@@ -607,11 +607,11 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -629,11 +629,11 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -651,10 +651,10 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Length Number of bytes to send via the currently selected pipe.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -672,11 +672,11 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to write to.
* \param Length Number of bytes to read for the currently selected pipe to read from.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -694,11 +694,11 @@
*
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to write to.
* \param Length Number of bytes to read for the currently selected pipe to read from.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -722,27 +722,27 @@
#define Pipe_Ignore_DWord() Pipe_Discard_DWord()
/** Alias for Pipe_Read_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Read_Word() Pipe_Read_Word_LE()
/** Alias for Pipe_Write_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Write_Word(Word) Pipe_Write_Word_LE(Word)
/** Alias for Pipe_Read_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Read_DWord() Pipe_Read_DWord_LE()
/** Alias for Pipe_Write_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Write_DWord(DWord) Pipe_Write_DWord_LE(DWord)
/** Alias for Pipe_Read_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Pipe_Read_Stream(Buffer, Length, Callback) Pipe_Read_Stream_LE(Buffer, Length, Callback)
@@ -751,7 +751,7 @@
#endif
/** Alias for Pipe_Write_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Pipe_Write_Stream(Buffer, Length, Callback) Pipe_Read_Stream_LE(Buffer, Length, Callback)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 21:32:02 +0000