diff options
Diffstat (limited to 'LUFA/Drivers/USB/HighLevel')
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/EndpointStream.c | 233 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/EndpointStream.h | 524 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/PipeStream.c | 195 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/PipeStream.h | 298 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_R.c | 45 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_W.c | 54 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_RW.c | 79 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/Template/Template_Pipe_RW.c | 82 |
8 files changed, 1510 insertions, 0 deletions
diff --git a/LUFA/Drivers/USB/HighLevel/EndpointStream.c b/LUFA/Drivers/USB/HighLevel/EndpointStream.c new file mode 100644 index 000000000..841f661be --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/EndpointStream.c @@ -0,0 +1,233 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#define __INCLUDE_FROM_USB_DRIVER
+#include "USBMode.h"
+
+#if defined(USB_CAN_BE_DEVICE)
+
+#include "EndpointStream.h"
+
+#if !defined(CONTROL_ONLY_DEVICE)
+uint8_t Endpoint_Discard_Stream(uint16_t Length
+ __CALLBACK_PARAM)
+{
+ uint8_t ErrorCode;
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+
+ #if defined(FAST_STREAM_TRANSFERS)
+ uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
+
+ if (Length >= 8)
+ {
+ Length -= BytesRemToAlignment;
+
+ switch (BytesRemToAlignment)
+ {
+ default:
+ do
+ {
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ Endpoint_ClearOUT();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return ENDPOINT_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+ }
+
+ Length -= 8;
+
+ Endpoint_Discard_Byte();
+ case 7: Endpoint_Discard_Byte();
+ case 6: Endpoint_Discard_Byte();
+ case 5: Endpoint_Discard_Byte();
+ case 4: Endpoint_Discard_Byte();
+ case 3: Endpoint_Discard_Byte();
+ case 2: Endpoint_Discard_Byte();
+ case 1: Endpoint_Discard_Byte();
+ } while (Length >= 8);
+ }
+ }
+ #endif
+
+ while (Length)
+ {
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ Endpoint_ClearOUT();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return ENDPOINT_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ Endpoint_Discard_Byte();
+ Length--;
+ }
+ }
+
+ return ENDPOINT_RWSTREAM_NoError;
+}
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*((uint8_t*)BufferPtr++))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte((uint8_t*)BufferPtr++))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte((uint8_t*)BufferPtr++))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*((uint8_t*)BufferPtr--))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte((uint8_t*)BufferPtr--))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte((uint8_t*)BufferPtr--))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *((uint8_t*)BufferPtr++) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte((uint8_t*)BufferPtr++, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *((uint8_t*)BufferPtr--) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte((uint8_t*)BufferPtr--, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_RW.c"
+
+#endif
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*((uint8_t*)BufferPtr++))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte((uint8_t*)BufferPtr++))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte((uint8_t*)BufferPtr++))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*((uint8_t*)BufferPtr--))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte((uint8_t*)BufferPtr--))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte((uint8_t*)BufferPtr--))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *((uint8_t*)BufferPtr++) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte((uint8_t*)BufferPtr++, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *((uint8_t*)BufferPtr--) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte((uint8_t*)BufferPtr--, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_Control_R.c"
+
+#endif
\ No newline at end of file diff --git a/LUFA/Drivers/USB/HighLevel/EndpointStream.h b/LUFA/Drivers/USB/HighLevel/EndpointStream.h new file mode 100644 index 000000000..ba2cce8de --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/EndpointStream.h @@ -0,0 +1,524 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB device endpoint stream function definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the sending and receiving of
+ * arbitrary data streams through the device's data endpoints when the library is initialized in USB device mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_EndpointRW
+ * @defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to endpoints.
+ *
+ * @{
+ */
+
+#ifndef __ENDPOINT_STREAM_H__
+#define __ENDPOINT_STREAM_H__
+
+ /* Includes: */
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+ #include <avr/eeprom.h>
+ #include <stdbool.h>
+
+ #include "../../../Common/Common.h"
+ #include "USBTask.h"
+
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #include "StreamCallbacks.h"
+ #endif
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #define __CALLBACK_PARAM , StreamCallbackPtr_t Callback
+ #else
+ #define __CALLBACK_PARAM
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Enums: */
+ /** Enum for the possible error return codes of the Endpoint_*_Stream_* functions. */
+ enum Endpoint_Stream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream
+ * transfer by the host or device.
+ */
+ ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet
+ * within the software timeout period set by the
+ * \ref USB_STREAM_TIMEOUT_MS macro.
+ */
+ ENDPOINT_RWSTREAM_CallbackAborted = 5, /**< Indicates that the stream's callback function
+ * aborted the transfer early.
+ */
+ };
+
+ /** Enum for the possible error return codes of the Endpoint_*_Control_Stream_* functions. */
+ enum Endpoint_ControlStream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */
+ ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ };
+
+ /* Function Prototypes: */
+ /** Reads and discards the given number of bytes from the endpoint from the given buffer,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
+ * each USB packet, the given stream callback function is executed repeatedly until the next
+ * packet is ready, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Discard_Stream(uint16_t Length
+ __CALLBACK_PARAM);
+
+ /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
+ * sending full packets to the host as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
+ * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
+ * aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Stream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
+ * sending full packets to the host as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
+ * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
+ * aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Stream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
+ * each USB packet, the given stream callback function is executed repeatedly until the endpoint
+ * is ready to accept the next packet, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Stream_LE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_LE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
+ * each USB packet, the given stream callback function is executed repeatedly until the endpoint
+ * is ready to accept the next packet, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Stream_BE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_BE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
+ * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
+ * in both failure and success states; the user is responsible for manually clearing the setup OUT to
+ * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_LE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_LE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
+ * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
+ * in both failure and success states; the user is responsible for manually clearing the setup OUT to
+ * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_BE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_BE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
+ * discarding fully read packets from the host as needed. The device IN acknowledgement is not
+ * automatically sent after success or failure states; the user is responsible for manually sending the
+ * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_LE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
+ * discarding fully read packets from the host as needed. The device IN acknowledgement is not
+ * automatically sent after success or failure states; the user is responsible for manually sending the
+ * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_BE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
diff --git a/LUFA/Drivers/USB/HighLevel/PipeStream.c b/LUFA/Drivers/USB/HighLevel/PipeStream.c new file mode 100644 index 000000000..72a7e64d3 --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/PipeStream.c @@ -0,0 +1,195 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#define __INCLUDE_FROM_USB_DRIVER
+#include "USBMode.h"
+
+#if defined(USB_CAN_BE_HOST)
+
+#include "PipeStream.h"
+
+uint8_t Pipe_Discard_Stream(uint16_t Length
+ __CALLBACK_PARAM)
+{
+ uint8_t ErrorCode;
+
+ Pipe_SetPipeToken(PIPE_TOKEN_IN);
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+
+ #if defined(FAST_STREAM_TRANSFERS)
+ uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
+
+ if (Length >= 8)
+ {
+ Length -= BytesRemToAlignment;
+
+ switch (BytesRemToAlignment)
+ {
+ default:
+ do
+ {
+ if (!(Pipe_IsReadWriteAllowed()))
+ {
+ Pipe_ClearIN();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return PIPE_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+ }
+
+ Length -= 8;
+
+ Pipe_Discard_Byte();
+ case 7: Pipe_Discard_Byte();
+ case 6: Pipe_Discard_Byte();
+ case 5: Pipe_Discard_Byte();
+ case 4: Pipe_Discard_Byte();
+ case 3: Pipe_Discard_Byte();
+ case 2: Pipe_Discard_Byte();
+ case 1: Pipe_Discard_Byte();
+ } while (Length >= 8);
+ }
+ }
+ #endif
+
+ while (Length)
+ {
+ if (!(Pipe_IsReadWriteAllowed()))
+ {
+ Pipe_ClearIN();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return PIPE_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ Pipe_Discard_Byte();
+ Length--;
+ }
+ }
+
+ return PIPE_RWSTREAM_NoError;
+}
+
+/* The following abuses the C preprocessor in order to copy-past common code with slight alterations,
+ * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*((uint8_t*)BufferPtr++))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte((uint8_t*)BufferPtr++))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte((uint8_t*)BufferPtr++))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*((uint8_t*)BufferPtr--))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte((uint8_t*)BufferPtr--))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte((uint8_t*)BufferPtr--))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *((uint8_t*)BufferPtr++) = Pipe_Read_Byte()
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte((uint8_t*)BufferPtr++, Pipe_Read_Byte())
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *((uint8_t*)BufferPtr--) = Pipe_Read_Byte()
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte((uint8_t*)BufferPtr--, Pipe_Read_Byte())
+#include "Template/Template_Pipe_RW.c"
+
+#endif
diff --git a/LUFA/Drivers/USB/HighLevel/PipeStream.h b/LUFA/Drivers/USB/HighLevel/PipeStream.h new file mode 100644 index 000000000..ba5df5788 --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/PipeStream.h @@ -0,0 +1,298 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB host pipe stream function definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the sending and receiving of
+ * arbitrary data streams through the device's data pipes when the library is initialized in USB host mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_PipeRW
+ * @defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to pipes.
+ *
+ * @{
+ */
+
+#ifndef __PIPE_STREAM_H__
+#define __PIPE_STREAM_H__
+
+ /* Includes: */
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+ #include <avr/eeprom.h>
+ #include <stdbool.h>
+
+ #include "../../../Common/Common.h"
+ #include "USBTask.h"
+
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #include "StreamCallbacks.h"
+ #endif
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #define __CALLBACK_PARAM , StreamCallbackPtr_t Callback
+ #else
+ #define __CALLBACK_PARAM
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Enums: */
+ /** Enum for the possible error return codes of the Pipe_*_Stream_* functions. */
+ enum Pipe_Stream_RW_ErrorCodes_t
+ {
+ PIPE_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ PIPE_RWSTREAM_PipeStalled = 1, /**< The device stalled the pipe during the transfer. */
+ PIPE_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ PIPE_RWSTREAM_Timeout = 3, /**< The device failed to accept or send the next packet
+ * within the software timeout period set by the
+ * \ref USB_STREAM_TIMEOUT_MS macro.
+ */
+ PIPE_RWSTREAM_CallbackAborted = 4, /**< Indicates that the stream's callback function aborted
+ * the transfer early.
+ */
+ };
+
+ /* Function Prototypes: */
+ /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
+ * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
+ * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
+ * Between each USB packet, the given stream callback function is executed repeatedly until the next packet is ready,
+ * allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[in] Length Number of bytes to send via the currently selected pipe.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Discard_Stream(uint16_t Length
+ __CALLBACK_PARAM);
+
+ /** Writes the given number of bytes to the pipe from the given buffer in little endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_Stream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_EStream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Pipe_Write_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_PStream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the pipe from the given buffer in big endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_Stream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_EStream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Pipe_Write_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_PStream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the pipe into the given buffer in little endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_Stream_LE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_EStream_LE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the pipe into the given buffer in big endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_Stream_BE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_EStream_BE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
diff --git a/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_R.c b/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_R.c new file mode 100644 index 000000000..43abe6e1e --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_R.c @@ -0,0 +1,45 @@ +uint8_t TEMPLATE_FUNC_NAME (void* Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + + if (!(Length)) + Endpoint_ClearOUT(); + + while (Length) + { + if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + + if (USB_DeviceState == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + + if (Endpoint_IsOUTReceived()) + { + while (Length && Endpoint_BytesInEndpoint()) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + Length--; + } + + Endpoint_ClearOUT(); + } + } + + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE
\ No newline at end of file diff --git a/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_W.c b/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_W.c new file mode 100644 index 000000000..dc2c37dfc --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_Control_W.c @@ -0,0 +1,54 @@ +uint8_t TEMPLATE_FUNC_NAME (const void* Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + bool LastPacketFull = false; + + if (Length > USB_ControlRequest.wLength) + Length = USB_ControlRequest.wLength; + else if (!(Length)) + Endpoint_ClearIN(); + + while (Length || LastPacketFull) + { + if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + + if (Endpoint_IsOUTReceived()) + break; + + if (USB_DeviceState == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + + if (Endpoint_IsINReady()) + { + uint8_t BytesInEndpoint = Endpoint_BytesInEndpoint(); + + while (Length && (BytesInEndpoint < USB_ControlEndpointSize)) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + Length--; + BytesInEndpoint++; + } + + LastPacketFull = (BytesInEndpoint == USB_ControlEndpointSize); + Endpoint_ClearIN(); + } + } + + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE
\ No newline at end of file diff --git a/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_RW.c b/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_RW.c new file mode 100644 index 000000000..fc9df951d --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/Template/Template_Endpoint_RW.c @@ -0,0 +1,79 @@ +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE Buffer, + uint16_t Length + __CALLBACK_PARAM) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint8_t ErrorCode; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + #if defined(FAST_STREAM_TRANSFERS) + uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07); + + if (Length >= 8) + { + Length -= BytesRemToAlignment; + + switch (BytesRemToAlignment) + { + default: + do + { + if (!(Endpoint_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_ENDPOINT(); + + #if !defined(NO_STREAM_CALLBACKS) + if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort)) + return ENDPOINT_RWSTREAM_CallbackAborted; + #endif + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + + Length -= 8; + + TEMPLATE_TRANSFER_BYTE(DataStream); + case 7: TEMPLATE_TRANSFER_BYTE(DataStream); + case 6: TEMPLATE_TRANSFER_BYTE(DataStream); + case 5: TEMPLATE_TRANSFER_BYTE(DataStream); + case 4: TEMPLATE_TRANSFER_BYTE(DataStream); + case 3: TEMPLATE_TRANSFER_BYTE(DataStream); + case 2: TEMPLATE_TRANSFER_BYTE(DataStream); + case 1: TEMPLATE_TRANSFER_BYTE(DataStream); + } while (Length >= 8); + } + } + #endif + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_ENDPOINT(); + + #if !defined(NO_STREAM_CALLBACKS) + if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort)) + return ENDPOINT_RWSTREAM_CallbackAborted; + #endif + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + Length--; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_ENDPOINT +#undef TEMPLATE_BUFFER_OFFSET
\ No newline at end of file diff --git a/LUFA/Drivers/USB/HighLevel/Template/Template_Pipe_RW.c b/LUFA/Drivers/USB/HighLevel/Template/Template_Pipe_RW.c new file mode 100644 index 000000000..fb64dd837 --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/Template/Template_Pipe_RW.c @@ -0,0 +1,82 @@ +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE Buffer, + uint16_t Length + __CALLBACK_PARAM) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint8_t ErrorCode; + + Pipe_SetPipeToken(TEMPLATE_TOKEN); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + #if defined(FAST_STREAM_TRANSFERS) + uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07); + + if (Length >= 8) + { + Length -= BytesRemToAlignment; + + switch (BytesRemToAlignment) + { + default: + do + { + if (!(Pipe_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_PIPE(); + + #if !defined(NO_STREAM_CALLBACKS) + if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort)) + return PIPE_RWSTREAM_CallbackAborted; + #endif + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + + Length -= 8; + + TEMPLATE_TRANSFER_BYTE(DataStream); + case 7: TEMPLATE_TRANSFER_BYTE(DataStream); + case 6: TEMPLATE_TRANSFER_BYTE(DataStream); + case 5: TEMPLATE_TRANSFER_BYTE(DataStream); + case 4: TEMPLATE_TRANSFER_BYTE(DataStream); + case 3: TEMPLATE_TRANSFER_BYTE(DataStream); + case 2: TEMPLATE_TRANSFER_BYTE(DataStream); + case 1: TEMPLATE_TRANSFER_BYTE(DataStream); + } while (Length >= 8); + } + } + #endif + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_PIPE(); + + #if !defined(NO_STREAM_CALLBACKS) + if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort)) + return PIPE_RWSTREAM_CallbackAborted; + #endif + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + Length--; + } + } + + return PIPE_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TOKEN +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_PIPE +#undef TEMPLATE_BUFFER_OFFSET |