diff options
Diffstat (limited to 'LUFA/Drivers/Board')
-rw-r--r-- | LUFA/Drivers/Board/Buttons.h | 6 | ||||
-rw-r--r-- | LUFA/Drivers/Board/Dataflash.h | 20 | ||||
-rw-r--r-- | LUFA/Drivers/Board/Joystick.h | 12 | ||||
-rw-r--r-- | LUFA/Drivers/Board/LEDs.h | 6 | ||||
-rw-r--r-- | LUFA/Drivers/Board/Temperature.h | 2 |
5 files changed, 23 insertions, 23 deletions
diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h index c3d6c0d00..1b70a6bd5 100644 --- a/LUFA/Drivers/Board/Buttons.h +++ b/LUFA/Drivers/Board/Buttons.h @@ -68,13 +68,13 @@ * \code * // Initialize the button driver before first use * Buttons_Init(); - * + * * printf("Waiting for button press...\r\n"); - * + * * // Loop until a board button has been pressed * uint8_t ButtonPress; * while (!(ButtonPress = Buttons_GetStatus())) {}; - * + * * // Display which button was pressed (assuming two board buttons) * printf("Button pressed: %s\r\n", (ButtonPress == BUTTONS_BUTTON1) ? "Button 1" : "Button 2"); * \endcode diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h index a5ae29dc8..c9f66054b 100644 --- a/LUFA/Drivers/Board/Dataflash.h +++ b/LUFA/Drivers/Board/Dataflash.h @@ -70,44 +70,44 @@ * SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); * Dataflash_Init(); - * + * * uint8_t WriteBuffer[DATAFLASH_PAGE_SIZE]; * uint8_t ReadBuffer[DATAFLASH_PAGE_SIZE]; - * + * * // Fill page write buffer with a repeating pattern * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++) * WriteBuffer[i] = (i & 0xFF); - * + * * // Must select the chip of interest first before operating on it * Dataflash_SelectChip(DATAFLASH_CHIP1); - * + * * // Write to the Dataflash's first internal memory buffer * printf("Writing data to first dataflash buffer:\r\n"); * Dataflash_SendByte(DF_CMD_BUFF1WRITE); * Dataflash_SendAddressBytes(0, 0); - * + * * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++) * Dataflash_SendByte(WriteBuffer[i]); - * + * * // Commit the Dataflash's first memory buffer to the non-volatile FLASH memory * printf("Committing page to non-volatile memory page index 5:\r\n"); * Dataflash_SendByte(DF_CMD_BUFF1TOMAINMEMWITHERASE); * Dataflash_SendAddressBytes(5, 0); * Dataflash_WaitWhileBusy(); - * + * * // Read the page from non-volatile FLASH memory into the Dataflash's second memory buffer * printf("Reading data into second dataflash buffer:\r\n"); * Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF2); * Dataflash_SendAddressBytes(5, 0); * Dataflash_WaitWhileBusy(); - * + * * // Read the Dataflash's second internal memory buffer * Dataflash_SendByte(DF_CMD_BUFF2READ); * Dataflash_SendAddressBytes(0, 0); - * + * * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++) * ReadBuffer[i] = Dataflash_ReceiveByte(); - * + * * // Deselect the chip after use * Dataflash_DeselectChip(); * \endcode diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h index 0a1f9fa7a..63d28e837 100644 --- a/LUFA/Drivers/Board/Joystick.h +++ b/LUFA/Drivers/Board/Joystick.h @@ -67,22 +67,22 @@ * \code * // Initialize the board Joystick driver before first use * Joystick_Init(); - * + * * printf("Waiting for joystick movement...\r\n"); - * + * * // Loop until a the joystick has been moved * uint8_t JoystickMovement; * while (!(JoystickMovement = Joystick_GetStatus())) {}; - * + * * // Display which direction the joystick was moved in * printf("Joystick moved:\r\n"); - * + * * if (JoystickMovement & (JOY_UP | JOY_DOWN)) * printf("%s ", (JoystickMovement & JOY_UP) ? "Up" : "Down"); - * + * * if (JoystickMovement & (JOY_LEFT | JOY_RIGHT)) * printf("%s ", (JoystickMovement & JOY_LEFT) ? "Left" : "Right"); - * + * * if (JoystickMovement & JOY_PRESS) * printf("Pressed"); * \endcode diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index f6f9d82ff..97cb81a50 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -76,7 +76,7 @@ * \code * // Initialize the board LED driver before first use * LEDs_Init(); - * + * * // Turn on each of the four LEDs in turn * LEDs_SetAllLEDs(LEDS_LED1); * Delay_MS(500); @@ -86,11 +86,11 @@ * Delay_MS(500); * LEDs_SetAllLEDs(LEDS_LED4); * Delay_MS(500); - * + * * // Turn on all LEDs * LEDs_SetAllLEDs(LEDS_ALL_LEDS); * Delay_MS(1000); - * + * * // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state * LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1); * \endcode diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h index ef967967b..54ca957a6 100644 --- a/LUFA/Drivers/Board/Temperature.h +++ b/LUFA/Drivers/Board/Temperature.h @@ -56,7 +56,7 @@ * // Initialize the ADC and board temperature sensor drivers before first use * ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128); * Temperature_Init(); - * + * * // Display converted temperature in degrees Celsius * printf("Current Temperature: %d Degrees\r\n", Temperature_GetTemperature()); * \endcode |