diff options
Diffstat (limited to 'Demos/Device/LowLevel/MassStorage')
8 files changed, 155 insertions, 29 deletions
diff --git a/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h b/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h new file mode 100644 index 000000000..2582279ea --- /dev/null +++ b/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define TOTAL_LUNS 1 + + #define DISK_READ_ONLY false + +#endif
\ No newline at end of file diff --git a/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h b/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.c b/Demos/Device/LowLevel/MassStorage/Descriptors.c index 5c62f7fb1..36774e804 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.c +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.h b/Demos/Device/LowLevel/MassStorage/Descriptors.h index 34a85f6d1..3732ee879 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.h +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.h @@ -41,6 +41,8 @@ #include <avr/pgmspace.h> + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) diff --git a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h index d70a86c19..7612ddadb 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h @@ -45,7 +45,7 @@ #include <LUFA/Common/Common.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/Dataflash.h> - + /* Preprocessor Checks: */ #if (DATAFLASH_PAGE_SIZE % 16) #error Dataflash page size must be a multiple of 16 bytes. @@ -65,11 +65,6 @@ */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - /** Total number of Logical Units (drives) in the device. The total device capacity is shared equally between - * each drive - this can be set to any positive non-zero amount. - */ - #define TOTAL_LUNS 1 - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.h b/Demos/Device/LowLevel/MassStorage/MassStorage.h index c1573706d..37f3ae5a3 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.h +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.h @@ -46,8 +46,8 @@ #include "Lib/SCSI.h" #include "Lib/DataflashManager.h" + #include "Config/AppConfig.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Dataflash.h> @@ -68,9 +68,6 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - /** Indicates if the disk is write protected or not. */ - #define DISK_READ_ONLY false - /* Global Variables: */ extern MS_CommandBlockWrapper_t CommandBlock; extern MS_CommandStatusWrapper_t CommandStatus; diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt index 4a5786194..b5f9f9cef 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt @@ -83,10 +83,15 @@ * </tr> * <tr> * <td>TOTAL_LUNS</td> - * <td>MassStorage.h</td> + * <td>AppConfig.h</td> * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive * - this can be set to any positive non-zero amount.</td> * </tr> + * <tr> + * <td>DISK_READ_ONLY</td> + * <td>AppConfig.h</td> + * <td>Indicates if the disk should be write protected or not.</td> + * </tr> * </table> */ diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index 67b3c218d..e78e2640b 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -120,12 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. |