diff options
Diffstat (limited to 'Bootloaders/DFU')
| -rw-r--r-- | Bootloaders/DFU/BootloaderDFU.txt | 6 | ||||
| -rw-r--r-- | Bootloaders/DFU/makefile | 2 |
2 files changed, 4 insertions, 4 deletions
diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index e10beea36..2c9eaf1de 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -47,9 +47,9 @@ * This bootloader enumerates to the host as a DFU Class device, allowing for DFU-compatible programming * software to load firmware onto the AVR. * - * Out of the box this bootloader builds for the AT90USBUSB1287, and will fit into 4KB of bootloader space. - * If you wish to enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB - * and BOOT_SECTION_SIZE_KB values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to + * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the * bootloader from the normal user application. diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index 608564ebe..f78ceb270 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section, and the User Application |