aboutsummaryrefslogtreecommitdiffstats
path: root/Bootloaders/CDC/BootloaderCDC.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Bootloaders/CDC/BootloaderCDC.txt')
-rw-r--r--Bootloaders/CDC/BootloaderCDC.txt38
1 files changed, 28 insertions, 10 deletions
diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index cb6f9f01f..1f8970d57 100644
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -5,15 +5,10 @@
*/
/** \mainpage CDC Class USB AVR Bootloader
- *
- * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
- * protocol compatible programming software to load firmware onto the AVR.
- *
- * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
- * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
- * values in the accompanying makefile.
- *
- * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
+ *
+ * \section SSec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
@@ -37,4 +32,27 @@
* <td>Full Speed Mode</td>
* </tr>
* </table>
- */
+ *
+ * \section SSec_Description Project Description:
+ *
+ * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
+ * protocol compatible programming software to load firmware onto the AVR.
+ *
+ * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
+ * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
+ * values in the accompanying makefile.
+ *
+ * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
+ *
+ * \section SSec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td>
+ * None
+ * </td>
+ * </tr>
+ * </table>
+ */ \ No newline at end of file