diff options
| -rw-r--r-- | Projects/AVRISP/Lib/XPROG/TPITarget.c | 338 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/XPROG/TPITarget.h | 100 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/XPROG/XPROGTarget.c (renamed from Projects/AVRISP/Lib/XPROG/PDITarget.c) | 0 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/XPROG/XPROGTarget.h (renamed from Projects/AVRISP/Lib/XPROG/PDITarget.h) | 0 |
4 files changed, 0 insertions, 438 deletions
diff --git a/Projects/AVRISP/Lib/XPROG/TPITarget.c b/Projects/AVRISP/Lib/XPROG/TPITarget.c deleted file mode 100644 index 441f5526a..000000000 --- a/Projects/AVRISP/Lib/XPROG/TPITarget.c +++ /dev/null @@ -1,338 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Target-related functions for the TPI Protocol decoder.
- */
-
-#define INCLUDE_FROM_TPITARGET_C
-#include "TPITarget.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Flag to indicate if the USART is currently in Tx or Rx mode. */
-volatile bool IsSending;
-
-#if !defined(XPROG_VIA_HARDWARE_USART)
-/** Software USART raw frame bits for transmission/reception. */
-volatile uint16_t SoftUSART_Data;
-
-/** Bits remaining to be sent or received via the software USART - set as a GPIOR for speed. */
-#define SoftUSART_BitCount GPIOR2
-
-
-/** ISR to manage the software USART when bit-banged USART mode is selected. */
-ISR(TIMER1_CAPT_vect, ISR_BLOCK)
-{
- /* Toggle CLOCK pin in a single cycle (see AVR datasheet) */
- BITBANG_TPICLOCK_PIN |= BITBANG_TPICLOCK_MASK;
-
- /* If not sending or receiving, just exit */
- if (!(SoftUSART_BitCount))
- return;
-
- /* Check to see if we are at a rising or falling edge of the clock */
- if (BITBANG_TPICLOCK_PORT & BITBANG_TPICLOCK_MASK)
- {
- /* If at rising clock edge and we are in send mode, abort */
- if (IsSending)
- return;
-
- /* Wait for the start bit when receiving */
- if ((SoftUSART_BitCount == BITS_IN_TPI_FRAME) && (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK))
- return;
-
- /* Shift in the bit one less than the frame size in position, so that the start bit will eventually
- * be discarded leaving the data to be byte-aligned for quick access */
- if (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK)
- SoftUSART_Data |= (1 << (BITS_IN_TPI_FRAME - 1));
-
- SoftUSART_Data >>= 1;
- SoftUSART_BitCount--;
- }
- else
- {
- /* If at falling clock edge and we are in receive mode, abort */
- if (!IsSending)
- return;
-
- /* Set the data line to the next bit value */
- if (SoftUSART_Data & 0x01)
- BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
- else
- BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
-
- SoftUSART_Data >>= 1;
- SoftUSART_BitCount--;
- }
-}
-#endif
-
-/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
-void TPITarget_EnableTargetTPI(void)
-{
- /* Set /RESET line low for at least 90ns to enable TPI functionality */
- RESET_LINE_DDR |= RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
- asm volatile ("NOP"::);
- asm volatile ("NOP"::);
-
-#if defined(XPROG_VIA_HARDWARE_USART)
- /* Set Tx and XCK as outputs, Rx as input */
- DDRD |= (1 << 5) | (1 << 3);
- DDRD &= ~(1 << 2);
-
- /* Set up the synchronous USART for XMEGA communications -
- 8 data bits, even parity, 2 stop bits */
- UBRR1 = (F_CPU / 1000000UL);
- UCSR1B = (1 << TXEN1);
- UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-
- /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
- TPITarget_SendBreak();
- TPITarget_SendBreak();
-#else
- /* Set DATA and CLOCK lines to outputs */
- BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
- BITBANG_TPICLOCK_DDR |= BITBANG_TPICLOCK_MASK;
-
- /* Set DATA line high for idle state */
- BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
-
- /* Fire timer capture ISR every 100 cycles to manage the software USART */
- OCR1A = 80;
- TCCR1B = (1 << WGM13) | (1 << WGM12) | (1 << CS10);
- TIMSK1 = (1 << ICIE1);
-
- /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
- TPITarget_SendBreak();
- TPITarget_SendBreak();
-#endif
-}
-
-/** Disables the target's TPI interface, exits programming mode and starts the target's application. */
-void TPITarget_DisableTargetTPI(void)
-{
-#if defined(XPROG_VIA_HARDWARE_USART)
- /* Turn off receiver and transmitter of the USART, clear settings */
- UCSR1A |= (1 << TXC1) | (1 << RXC1);
- UCSR1B = 0;
- UCSR1C = 0;
-
- /* Set all USART lines as input, tristate */
- DDRD &= ~((1 << 5) | (1 << 3));
- PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-#else
- /* Set DATA and CLOCK lines to inputs */
- BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
- BITBANG_TPICLOCK_DDR &= ~BITBANG_TPICLOCK_MASK;
-
- /* Tristate DATA and CLOCK lines */
- BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
- BITBANG_TPICLOCK_PORT &= ~BITBANG_TPICLOCK_MASK;
-#endif
-
- /* Tristate target /RESET line */
- RESET_LINE_DDR &= ~RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
-}
-
-/** Sends a byte via the USART.
- *
- * \param[in] Byte Byte to send through the USART
- */
-void TPITarget_SendByte(const uint8_t Byte)
-{
-#if defined(XPROG_VIA_HARDWARE_USART)
- /* Switch to Tx mode if currently in Rx mode */
- if (!(IsSending))
- {
- PORTD |= (1 << 3);
- DDRD |= (1 << 3);
-
- UCSR1B |= (1 << TXEN1);
- UCSR1B &= ~(1 << RXEN1);
-
- IsSending = true;
- }
-
- /* Wait until there is space in the hardware Tx buffer before writing */
- while (!(UCSR1A & (1 << UDRE1)));
- UCSR1A |= (1 << TXC1);
- UDR1 = Byte;
-#else
- /* Switch to Tx mode if currently in Rx mode */
- if (!(IsSending))
- {
- BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
- BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
-
- IsSending = true;
- }
-
- /* Calculate the new USART frame data here while while we wait for a previous byte (if any) to finish sending */
- uint16_t NewUSARTData = ((1 << 11) | (1 << 10) | (0 << 9) | ((uint16_t)Byte << 1) | (0 << 0));
-
- /* Compute Even parity - while a bit is still set, chop off lowest bit and toggle parity bit */
- uint8_t ParityData = Byte;
- while (ParityData)
- {
- NewUSARTData ^= (1 << 9);
- ParityData &= (ParityData - 1);
- }
-
- /* Wait until transmitter is idle before writing new data */
- while (SoftUSART_BitCount);
-
- /* Data shifted out LSB first, START DATA PARITY STOP STOP */
- SoftUSART_Data = NewUSARTData;
- SoftUSART_BitCount = BITS_IN_TPI_FRAME;
-#endif
-}
-
-/** Receives a byte via the software USART, blocking until data is received.
- *
- * \return Received byte from the USART
- */
-uint8_t TPITarget_ReceiveByte(void)
-{
-#if defined(XPROG_VIA_HARDWARE_USART)
- /* Switch to Rx mode if currently in Tx mode */
- if (IsSending)
- {
- while (!(UCSR1A & (1 << TXC1)));
- UCSR1A |= (1 << TXC1);
-
- UCSR1B &= ~(1 << TXEN1);
- UCSR1B |= (1 << RXEN1);
-
- DDRD &= ~(1 << 3);
- PORTD &= ~(1 << 3);
-
- IsSending = false;
- }
-
- /* Wait until a byte has been received before reading */
- while (!(UCSR1A & (1 << RXC1)));
- return UDR1;
-#else
- /* Switch to Rx mode if currently in Tx mode */
- if (IsSending)
- {
- while (SoftUSART_BitCount);
-
- BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
- BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
-
- IsSending = false;
- }
-
- /* Wait until a byte has been received before reading */
- SoftUSART_BitCount = BITS_IN_TPI_FRAME;
- while (SoftUSART_BitCount);
-
- /* Throw away the parity and stop bits to leave only the data (start bit is already discarded) */
- return (uint8_t)SoftUSART_Data;
-#endif
-}
-
-/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
-void TPITarget_SendBreak(void)
-{
-#if defined(XPROG_VIA_HARDWARE_USART)
- /* Switch to Tx mode if currently in Rx mode */
- if (!(IsSending))
- {
- PORTD |= (1 << 3);
- DDRD |= (1 << 3);
-
- UCSR1B &= ~(1 << RXEN1);
- UCSR1B |= (1 << TXEN1);
-
- IsSending = true;
- }
-
- /* Need to do nothing for a full frame to send a BREAK */
- for (uint8_t i = 0; i < BITS_IN_TPI_FRAME; i++)
- {
- /* Wait for a full cycle of the clock */
- while (PIND & (1 << 5));
- while (!(PIND & (1 << 5)));
- }
-#else
- /* Switch to Tx mode if currently in Rx mode */
- if (!(IsSending))
- {
- BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
- BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
-
- IsSending = true;
- }
-
- while (SoftUSART_BitCount);
-
- /* Need to do nothing for a full frame to send a BREAK */
- SoftUSART_Data = 0x0FFF;
- SoftUSART_BitCount = BITS_IN_TPI_FRAME;
-#endif
-}
-
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC
- * calculation.
- *
- * \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
- */
-bool TPITarget_WaitWhileNVMBusBusy(void)
-{
- TCNT0 = 0;
- TIFR0 = (1 << OCF1A);
-
- uint8_t TimeoutMS = TPI_NVM_TIMEOUT_MS;
-
- /* Poll the STATUS register to check to see if NVM access has been enabled */
- while (TimeoutMS)
- {
- /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
- TPITarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
- if (TPITarget_ReceiveByte() & TPI_STATUS_NVM)
- return true;
-
- if (TIFR0 & (1 << OCF1A))
- {
- TIFR0 = (1 << OCF1A);
- TimeoutMS--;
- }
- }
-
- return false;
-}
-
-#endif
diff --git a/Projects/AVRISP/Lib/XPROG/TPITarget.h b/Projects/AVRISP/Lib/XPROG/TPITarget.h deleted file mode 100644 index 8dc176b1a..000000000 --- a/Projects/AVRISP/Lib/XPROG/TPITarget.h +++ /dev/null @@ -1,100 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for TPITarget.c.
- */
-
-#ifndef _TPI_TARGET_
-#define _TPI_TARGET_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <stdbool.h>
-
- #include <LUFA/Common/Common.h>
-
- /* Preprocessor Checks: */
- #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #undef ENABLE_ISP_PROTOCOL
-
- #if !defined(ENABLE_XPROG_PROTOCOL)
- #define ENABLE_XPROG_PROTOCOL
- #endif
- #endif
-
- /* Defines: */
- #define BITBANG_TPIDATA_PORT PORTB
- #define BITBANG_TPIDATA_DDR DDRB
- #define BITBANG_TPIDATA_PIN PINB
- #define BITBANG_TPIDATA_MASK (1 << 3)
-
- #define BITBANG_TPICLOCK_PORT PORTB
- #define BITBANG_TPICLOCK_DDR DDRB
- #define BITBANG_TPICLOCK_PIN PINB
- #define BITBANG_TPICLOCK_MASK (1 << 1)
-
- /** Total number of bits in a single USART frame */
- #define BITS_IN_TPI_FRAME 12
-
- /** Timeout in milliseconds of a PDI busy-wait command */
- #define TPI_NVM_TIMEOUT_MS 100
-
- #define TPI_CMD_SLD 0x20
- #define TPI_CMD_SST 0x60
- #define TPI_CMD_SSTPR 0x68
- #define TPI_CMD_SIN 0x10
- #define TPI_CMD_SOUT 0x90
- #define TPI_CMD_SLDCS 0x80
- #define TPI_CMD_SSTCS 0xC0
- #define TPI_CMD_SKEY 0xE0
-
- #define TPI_STATUS_REG 0x00
- #define TPI_CTRL_REG 0x02
- #define TPI_ID_REG 0x0F
-
- #define TPI_STATUS_NVM (1 << 1)
-
- #define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
-
- #define TPI_POINTER_INDIRECT 0
- #define TPI_POINTER_INDIRECT_PI (1 << 2)
-
- /* Function Prototypes: */
- void TPITarget_EnableTargetTPI(void);
- void TPITarget_DisableTargetTPI(void);
- void TPITarget_SendByte(const uint8_t Byte);
- uint8_t TPITarget_ReceiveByte(void);
- void TPITarget_SendBreak(void);
- bool TPITarget_WaitWhileNVMBusBusy(void);
-
-#endif
diff --git a/Projects/AVRISP/Lib/XPROG/PDITarget.c b/Projects/AVRISP/Lib/XPROG/XPROGTarget.c index 4070c0996..4070c0996 100644 --- a/Projects/AVRISP/Lib/XPROG/PDITarget.c +++ b/Projects/AVRISP/Lib/XPROG/XPROGTarget.c diff --git a/Projects/AVRISP/Lib/XPROG/PDITarget.h b/Projects/AVRISP/Lib/XPROG/XPROGTarget.h index 11af7f1a0..11af7f1a0 100644 --- a/Projects/AVRISP/Lib/XPROG/PDITarget.h +++ b/Projects/AVRISP/Lib/XPROG/XPROGTarget.h |