diff options
-rw-r--r-- | Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c | 16 | ||||
-rw-r--r-- | Demos/Device/LowLevel/MassStorage/MassStorage.c | 34 | ||||
-rw-r--r-- | Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c | 4 | ||||
-rw-r--r-- | Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h | 6 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Device/MassStorage.c | 58 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Device/MassStorage.h | 6 |
6 files changed, 63 insertions, 61 deletions
diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c index 468a04ab7..2e5adbac3 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c @@ -239,8 +239,6 @@ static void SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* MSInterfaceI /* Succeed the command and update the bytes transferred counter */
MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-
- return;
}
/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
@@ -255,15 +253,11 @@ static void SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* MSInterfaceInfo uint32_t BlockAddress;
uint16_t TotalBlocks;
- /* Load in the 32-bit block address (SCSI uses big-endian, so have to do it byte-by-byte) */
- ((uint8_t*)&BlockAddress)[3] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[2];
- ((uint8_t*)&BlockAddress)[2] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[3];
- ((uint8_t*)&BlockAddress)[1] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
- ((uint8_t*)&BlockAddress)[0] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[5];
+ /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
+ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
- /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to do it byte-by-byte) */
- ((uint8_t*)&TotalBlocks)[1] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[7];
- ((uint8_t*)&TotalBlocks)[0] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[8];
+ /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
+ TotalBlocks = SwapEndian_16(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
/* Check if the block address is outside the maximum allowable value for the LUN */
if (BlockAddress >= LUN_MEDIA_BLOCKS)
@@ -289,6 +283,4 @@ static void SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* MSInterfaceInfo /* Update the bytes transferred counter and succeed the command */
MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
- return;
}
diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.c b/Demos/Device/LowLevel/MassStorage/MassStorage.c index c41b5777f..f9ec4a840 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.c +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.c @@ -141,7 +141,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_ClearSETUP();
/* Indicate that the current transfer should be aborted */
- IsMassStoreReset = true;
+ IsMassStoreReset = true;
Endpoint_ClearStatusStage();
}
@@ -204,19 +204,6 @@ void MassStorage_Task(void) /* Return command status block to the host */
ReturnCommandStatus();
-
- /* Check if a Mass Storage Reset occurred */
- if (IsMassStoreReset)
- {
- /* Reset the data endpoint banks */
- Endpoint_ResetFIFO(MASS_STORAGE_OUT_EPNUM);
- Endpoint_ResetFIFO(MASS_STORAGE_IN_EPNUM);
-
- Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM);
- Endpoint_ClearStall();
- Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM);
- Endpoint_ClearStall();
- }
/* Indicate ready */
LEDs_SetAllLEDs(LEDMASK_USB_READY);
@@ -228,8 +215,23 @@ void MassStorage_Task(void) }
}
- /* Clear the abort transfer flag */
- IsMassStoreReset = false;
+ /* Check if a Mass Storage Reset occurred */
+ if (IsMassStoreReset)
+ {
+ /* Reset the data endpoint banks */
+ Endpoint_ResetFIFO(MASS_STORAGE_OUT_EPNUM);
+ Endpoint_ResetFIFO(MASS_STORAGE_IN_EPNUM);
+
+ Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM);
+ Endpoint_ClearStall();
+ Endpoint_ResetDataToggle();
+ Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM);
+ Endpoint_ClearStall();
+ Endpoint_ResetDataToggle();
+
+ /* Clear the abort transfer flag */
+ IsMassStoreReset = false;
+ }
}
/** Function to read in a command block from the host, via the bulk data OUT endpoint. This function reads in the next command block
diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c index 3c82eee7c..921f3a9f8 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c @@ -165,12 +165,12 @@ void ReadNextReport(void) *
* \param[in] ReportOUTData Buffer containing the report to send to the device
* \param[in] ReportIndex Index of the report in the device (zero if the device does not use multiple reports)
- * \param[in] ReportType Type of report to send, either HID_REPORTTYPE_OUTPUT or HID_REPORTTYPE_FEATURE
+ * \param[in] ReportType Type of report to send, either REPORT_ITEM_TYPE_Out or REPORT_ITEM_TYPE_Feature
* \param[in] ReportLength Length of the report to send
*/
void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t ReportType, uint16_t ReportLength)
{
- /* Select and unfreeze HID data OUT pipe */
+ /* Select the HID data OUT pipe */
Pipe_SelectPipe(HID_DATA_OUT_PIPE);
/* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the
diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h index 4a64b5791..3395e3278 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h @@ -61,12 +61,6 @@ /** HID Class specific request to send a HID report to the device. */
#define REQ_SetReport 0x09
-
- /** HID Report type specifier, for output reports to a device */
- #define HID_REPORTTYPE_OUTPUT 0x02
-
- /** HID Report type specifier, for feature reports to a device */
- #define HID_REPORTTYPE_FEATURE 0x03
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
diff --git a/LUFA/Drivers/USB/Class/Device/MassStorage.c b/LUFA/Drivers/USB/Class/Device/MassStorage.c index 43dc3f82b..f061ec8e6 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorage.c +++ b/LUFA/Drivers/USB/Class/Device/MassStorage.c @@ -34,7 +34,7 @@ #define INCLUDE_FROM_MS_CLASS_DEVICE_C
#include "MassStorage.h"
-static USB_ClassInfo_MS_Device_t* CallbackMSInterfaceInfo;
+static volatile bool* CallbackIsResetSource;
void MS_Device_ProcessControlRequest(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
{
@@ -130,8 +130,10 @@ void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber);
Endpoint_ClearStall();
+ Endpoint_ResetDataToggle();
Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber);
Endpoint_ClearStall();
+ Endpoint_ResetDataToggle();
MSInterfaceInfo->State.IsMassStoreReset = false;
}
@@ -141,11 +143,14 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte {
Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber);
- CallbackMSInterfaceInfo = MSInterfaceInfo;
- Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock,
- (sizeof(MS_CommandBlockWrapper_t) - 16),
- StreamCallback_MS_Device_AbortOnMassStoreReset);
-
+ CallbackIsResetSource = &MSInterfaceInfo->State.IsMassStoreReset;
+ if (Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock,
+ (sizeof(MS_CommandBlockWrapper_t) - 16),
+ StreamCallback_MS_Device_AbortOnMassStoreReset))
+ {
+ return false;
+ }
+
if ((MSInterfaceInfo->State.CommandBlock.Signature != MS_CBW_SIGNATURE) ||
(MSInterfaceInfo->State.CommandBlock.LUN >= MSInterfaceInfo->Config.TotalLUNs) ||
(MSInterfaceInfo->State.CommandBlock.Flags & 0x1F) ||
@@ -159,14 +164,17 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte return false;
}
- CallbackMSInterfaceInfo = MSInterfaceInfo;
- Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock.SCSICommandData,
- MSInterfaceInfo->State.CommandBlock.SCSICommandLength,
- StreamCallback_MS_Device_AbortOnMassStoreReset);
-
+ CallbackIsResetSource = &MSInterfaceInfo->State.IsMassStoreReset;
+ if (Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock.SCSICommandData,
+ MSInterfaceInfo->State.CommandBlock.SCSICommandLength,
+ StreamCallback_MS_Device_AbortOnMassStoreReset))
+ {
+ return false;
+ }
+
Endpoint_ClearOUT();
- return !(MSInterfaceInfo->State.IsMassStoreReset);
+ return true;
}
static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
@@ -175,7 +183,9 @@ static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInt while (Endpoint_IsStalled())
{
+ #if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
+ #endif
if (MSInterfaceInfo->State.IsMassStoreReset)
return;
@@ -185,27 +195,31 @@ static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInt while (Endpoint_IsStalled())
{
+ #if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
-
+ #endif
+
if (MSInterfaceInfo->State.IsMassStoreReset)
return;
}
- CallbackMSInterfaceInfo = MSInterfaceInfo;
- Endpoint_Write_Stream_LE(&MSInterfaceInfo->State.CommandStatus, sizeof(MS_CommandStatusWrapper_t),
- StreamCallback_MS_Device_AbortOnMassStoreReset);
-
- Endpoint_ClearIN();
+ CallbackIsResetSource = &MSInterfaceInfo->State.IsMassStoreReset;
+ if (Endpoint_Write_Stream_LE(&MSInterfaceInfo->State.CommandStatus, sizeof(MS_CommandStatusWrapper_t),
+ StreamCallback_MS_Device_AbortOnMassStoreReset))
+ {
+ return;
+ }
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return;
+ Endpoint_ClearIN();
}
static uint8_t StreamCallback_MS_Device_AbortOnMassStoreReset(void)
{
- MS_Device_USBTask(CallbackMSInterfaceInfo);
+ #if !defined(INTERRUPT_CONTROL_ENDPOINT)
+ USB_USBTask();
+ #endif
- if (CallbackMSInterfaceInfo->State.IsMassStoreReset)
+ if (*CallbackIsResetSource)
return STREAMCALLBACK_Abort;
else
return STREAMCALLBACK_Continue;
diff --git a/LUFA/Drivers/USB/Class/Device/MassStorage.h b/LUFA/Drivers/USB/Class/Device/MassStorage.h index a05003bbe..5c3d21bf4 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorage.h +++ b/LUFA/Drivers/USB/Class/Device/MassStorage.h @@ -87,9 +87,9 @@ MS_CommandStatusWrapper_t CommandStatus; /**< Mass Storage class command status structure, set elements to indicate
* the issued command's success or failure to the host
*/
- bool IsMassStoreReset; /**< Flag indicating that the host has requested that the Mass Storage interface be reset
- * and that all current Mass Storage operations should immediately abort
- */
+ volatile bool IsMassStoreReset; /**< Flag indicating that the host has requested that the Mass Storage interface be reset
+ * and that all current Mass Storage operations should immediately abort
+ */
} State; /**< State data for the USB class interface within the device. All elements in this section
* are reset to their defaults when the interface is enumerated.
*/
|