Add missing SVN eol-style property to files where it was missing.

1 files changed, 164 insertions, 164 deletions

diff --git a/Bootloaders/HID/BootloaderHID.c b/Bootloaders/HID/BootloaderHID.c
index 4a439544f..f4cb0f1a1 100644
--- a/Bootloaders/HID/BootloaderHID.c
+++ b/Bootloaders/HID/BootloaderHID.c
@@ -1,164 +1,164 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the HID class bootloader. This file contains the complete bootloader logic.

- */

- 

-#include "BootloaderHID.h"

-

-/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run

- *  via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application

- *  started via a forced watchdog reset.

- */

-static bool RunBootloader = true;

-

-/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously 

- *  runs the bootloader processing routine until instructed to soft-exit.

- */

-int main(void)

-{

-	/* Setup hardware required for the bootloader */

-	SetupHardware();

-	

-	/* Enable global interrupts so that the USB stack can function */

-	sei();

-

-	while (RunBootloader)

-	  USB_USBTask();

-	

-	/* Disconnect from the host - USB interface will be reset later along with the AVR */

-	USB_Detach();

-

-	/* Enable the watchdog and force a timeout to reset the AVR */

-	wdt_enable(WDTO_250MS);

-

-	for (;;);

-}

-

-/** Configures all hardware required for the bootloader. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Relocate the interrupt vector table to the bootloader section */

-	MCUCR = (1 << IVCE);

-	MCUCR = (1 << IVSEL);

-

-	/* Initialize USB subsystem */

-	USB_Init();

-}

-

-/** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready

- *  to relay data to and from the attached USB host.

- */

-void EVENT_USB_Device_ConfigurationChanged(void)

-{

-	/* Setup HID Report Endpoint */

-	Endpoint_ConfigureEndpoint(HID_IN_EPNUM, EP_TYPE_INTERRUPT,

-		                       ENDPOINT_DIR_IN, HID_IN_EPSIZE,

-	                           ENDPOINT_BANK_SINGLE);

-}

-

-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to

- *  the device from the USB host before passing along unhandled control requests to the library for processing

- *  internally.

- */

-void EVENT_USB_Device_ControlRequest(void)

-{

-	/* Ignore any requests that aren't directed to the HID interface */

-	if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=

-	    (REQTYPE_CLASS | REQREC_INTERFACE))

-	{

-		return;

-	}

-

-	/* Process HID specific control requests */

-	switch (USB_ControlRequest.bRequest)

-	{

-		case HID_REQ_SetReport:

-			Endpoint_ClearSETUP();

-			

-			/* Wait until the command has been sent by the host */

-			while (!(Endpoint_IsOUTReceived()));

-		

-			/* Read in the write destination address */

-			#if (FLASHEND > 0xFFFF)

-			uint32_t PageAddress = ((uint32_t)Endpoint_Read_16_LE() << 8);

-			#else

-			uint16_t PageAddress = Endpoint_Read_16_LE();

-			#endif

-			

-			/* Check if the command is a program page command, or a start application command */

-			#if (FLASHEND > 0xFFFF)

-			if ((uint16_t)(PageAddress >> 8) == COMMAND_STARTAPPLICATION)

-			#else

-			if (PageAddress == COMMAND_STARTAPPLICATION)

-			#endif

-			{

-				RunBootloader = false;

-			}

-			else

-			{

-				/* Erase the given FLASH page, ready to be programmed */

-				boot_page_erase(PageAddress);

-				boot_spm_busy_wait();

-				

-				/* Write each of the FLASH page's bytes in sequence */

-				for (uint8_t PageWord = 0; PageWord < (SPM_PAGESIZE / 2); PageWord++)				

-				{

-					/* Check if endpoint is empty - if so clear it and wait until ready for next packet */

-					if (!(Endpoint_BytesInEndpoint()))

-					{

-						Endpoint_ClearOUT();

-						while (!(Endpoint_IsOUTReceived()));

-					}

-

-					/* Write the next data word to the FLASH page */

-					boot_page_fill(PageAddress + ((uint16_t)PageWord << 1), Endpoint_Read_16_LE());

-				}

-

-				/* Write the filled FLASH page to memory */

-				boot_page_write(PageAddress);

-				boot_spm_busy_wait();

-

-				/* Re-enable RWW section */

-				boot_rww_enable();

-			}

-

-			Endpoint_ClearOUT();

-

-			Endpoint_ClearStatusStage();

-			break;

-	}

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the HID class bootloader. This file contains the complete bootloader logic.
+ */
+ 
+#include "BootloaderHID.h"
+
+/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
+ *  via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application
+ *  started via a forced watchdog reset.
+ */
+static bool RunBootloader = true;
+
+/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously 
+ *  runs the bootloader processing routine until instructed to soft-exit.
+ */
+int main(void)
+{
+	/* Setup hardware required for the bootloader */
+	SetupHardware();
+	
+	/* Enable global interrupts so that the USB stack can function */
+	sei();
+
+	while (RunBootloader)
+	  USB_USBTask();
+	
+	/* Disconnect from the host - USB interface will be reset later along with the AVR */
+	USB_Detach();
+
+	/* Enable the watchdog and force a timeout to reset the AVR */
+	wdt_enable(WDTO_250MS);
+
+	for (;;);
+}
+
+/** Configures all hardware required for the bootloader. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Relocate the interrupt vector table to the bootloader section */
+	MCUCR = (1 << IVCE);
+	MCUCR = (1 << IVSEL);
+
+	/* Initialize USB subsystem */
+	USB_Init();
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready
+ *  to relay data to and from the attached USB host.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	/* Setup HID Report Endpoint */
+	Endpoint_ConfigureEndpoint(HID_IN_EPNUM, EP_TYPE_INTERRUPT,
+		                       ENDPOINT_DIR_IN, HID_IN_EPSIZE,
+	                           ENDPOINT_BANK_SINGLE);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	/* Ignore any requests that aren't directed to the HID interface */
+	if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
+	    (REQTYPE_CLASS | REQREC_INTERFACE))
+	{
+		return;
+	}
+
+	/* Process HID specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case HID_REQ_SetReport:
+			Endpoint_ClearSETUP();
+			
+			/* Wait until the command has been sent by the host */
+			while (!(Endpoint_IsOUTReceived()));
+		
+			/* Read in the write destination address */
+			#if (FLASHEND > 0xFFFF)
+			uint32_t PageAddress = ((uint32_t)Endpoint_Read_16_LE() << 8);
+			#else
+			uint16_t PageAddress = Endpoint_Read_16_LE();
+			#endif
+			
+			/* Check if the command is a program page command, or a start application command */
+			#if (FLASHEND > 0xFFFF)
+			if ((uint16_t)(PageAddress >> 8) == COMMAND_STARTAPPLICATION)
+			#else
+			if (PageAddress == COMMAND_STARTAPPLICATION)
+			#endif
+			{
+				RunBootloader = false;
+			}
+			else
+			{
+				/* Erase the given FLASH page, ready to be programmed */
+				boot_page_erase(PageAddress);
+				boot_spm_busy_wait();
+				
+				/* Write each of the FLASH page's bytes in sequence */
+				for (uint8_t PageWord = 0; PageWord < (SPM_PAGESIZE / 2); PageWord++)				
+				{
+					/* Check if endpoint is empty - if so clear it and wait until ready for next packet */
+					if (!(Endpoint_BytesInEndpoint()))
+					{
+						Endpoint_ClearOUT();
+						while (!(Endpoint_IsOUTReceived()));
+					}
+
+					/* Write the next data word to the FLASH page */
+					boot_page_fill(PageAddress + ((uint16_t)PageWord << 1), Endpoint_Read_16_LE());
+				}
+
+				/* Write the filled FLASH page to memory */
+				boot_page_write(PageAddress);
+				boot_spm_busy_wait();
+
+				/* Re-enable RWW section */
+				boot_rww_enable();
+			}
+
+			Endpoint_ClearOUT();
+
+			Endpoint_ClearStatusStage();
+			break;
+	}
+}