# xd002 ![xd002](https://cdn.shopify.com/s/files/1/2711/4238/products/xd002_1024x1024.jpg?v=1522134411) 2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader. **Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard. * Keyboard Maintainer: [zvecr](https://github.com/zvecr) * Hardware Supported: xd002 * Hardware Availability: [kprepublic](https://kprepublic.com/products/xd002-xiudi-2-custom-mechanical-keyboard-2-keys-underglow-and-switch-rgb-pcb-programmed-hot-swappable-macro-key-aluminum-case) Make example for this keyboard (after setting up your build environment): make xd002:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). ## Flashing ### Prerequisites ```bash git clone https://github.com/micronucleus/micronucleus.git cd micronucleus/commandline/ sudo make install ``` On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following: ```bash sudo udevadm control --reload-rules sudo udevadm trigger ``` ### Instructions **Reset Key**: Hold down key nearest to the USB socket while plugging in the keyboard. ```bash make xd002:default:flash # or directly with... micronucleus --run ``` ### Recovery * [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test) * [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp) ffstats
path: root/keyboards/7skb/readme.md
blob: 18e4eef3ea80a13baa2a1d63796af9a7e41989f5 (plain) 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

# 7skb

![7skb](https://cdn-ak.f.st-hatena.com/images/fotolife/S/Salicylic_acid3/20191124/20191124025208.png)

This is 63 keys Custom keyboard.

* Keyboard Maintainer: [Salicylic_acid3](https://github.com/Salicylic-acid3)
* Hardware Supported: 7skb PCB, Pro Micro
* Hardware Availability: [PCB & Case Data](https://github.com/Salicylic-acid3/PCB_Data), [Booth Shop](https://salicylic-acid3.booth.pm/items/1673395)

Make example for this keyboard (after setting up your build environment):

    make 7skb:default

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

[Build guide](https://salicylic-acid3.hatenablog.com/entry/7skb-mx-build-guide)