From 6746e37088ce8ba03529c1226bd216705edb2b1f Mon Sep 17 00:00:00 2001 From: tmk Date: Fri, 10 Apr 2015 01:25:48 +0900 Subject: Remove core library and build files --- .../Drivers/USB/Core/XMEGA/USBController_XMEGA.h | 313 --------------------- 1 file changed, 313 deletions(-) delete mode 100644 protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h (limited to 'protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h') diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h deleted file mode 100644 index bb37905ab..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h +++ /dev/null @@ -1,313 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief USB Controller definitions for the AVR XMEGA microcontrollers. - * \copydetails Group_USBManagement_XMEGA - * - * \note This file should not be included directly. It is automatically included as needed by the USB driver - * dispatch header located in LUFA/Drivers/USB/USB.h. - */ - -/** \ingroup Group_USBManagement - * \defgroup Group_USBManagement_XMEGA USB Interface Management (XMEGA) - * \brief USB Controller definitions for the AVR XMEGA microcontrollers. - * - * Functions, macros, variables, enums and types related to the setup and management of the USB interface. - * - * @{ - */ - -#ifndef __USBCONTROLLER_XMEGA_H__ -#define __USBCONTROLLER_XMEGA_H__ - - /* Includes: */ - #include "../../../../Common/Common.h" - #include "../USBMode.h" - #include "../Events.h" - #include "../USBTask.h" - #include "../USBInterrupt.h" - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Type Defines: */ - typedef struct - { - struct - { - USB_EP_t OUT; - USB_EP_t IN; - } Endpoints[16]; - uint16_t FrameNum; - } ATTR_PACKED USB_EndpointTable_t; - - /* External Variables: */ - extern uint8_t USB_EndpointTable[]; - - #endif - - /* Includes: */ - #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) - #include "../Device.h" - #include "../Endpoint.h" - #include "../DeviceStandardReq.h" - #include "../EndpointStream.h" - #endif - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks and Defines: */ - #if !defined(__INCLUDE_FROM_USB_DRIVER) - #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. - #endif - - #if !defined(F_USB) - #error F_USB is not defined. You must define F_USB to the frequency of the unprescaled USB controller clock in your project makefile. - #endif - - #if ((F_USB % 6000000) || (F_USB < 6000000)) - #error Invalid F_USB specified. F_USB must be a multiple of 6MHz for USB Low Speed operation, and a multiple of 48MHz for Full Speed operation. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** \name USB Controller Option Masks */ - //@{ - /** Sets the USB bus interrupt priority level to be low priority. The USB bus interrupt is used for Start of Frame events, bus suspend - * and resume events, bus reset events and other events related to the management of the USB bus. - */ - #define USB_OPT_BUSEVENT_PRILOW ((0 << 2) | (0 << 1)) - - /** Sets the USB bus interrupt priority level to be medium priority. The USB bus interrupt is used for Start of Frame events, bus suspend - * and resume events, bus reset events and other events related to the management of the USB bus. - */ - #define USB_OPT_BUSEVENT_PRIMED ((0 << 2) | (1 << 1)) - - /** Sets the USB bus interrupt priority level to be high priority. The USB bus interrupt is used for Start of Frame events, bus suspend - * and resume events, bus reset events and other events related to the management of the USB bus. - */ - #define USB_OPT_BUSEVENT_PRIHIGH ((1 << 2) | (0 << 1)) - - /** Sets the USB controller to source its clock from the internal RC 32MHz clock, once it has been DFLL calibrated to 48MHz. */ - #define USB_OPT_RC32MCLKSRC (0 << 3) - - /** Sets the USB controller to source its clock from the internal PLL. */ - #define USB_OPT_PLLCLKSRC (1 << 3) - //@} - - #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) - /** Constant for the maximum software timeout period of the USB data stream transfer functions - * (both control and standard) when in either device or host mode. If the next packet of a stream - * is not received or acknowledged within this time period, the stream function will fail. - * - * This value may be overridden in the user project makefile as the value of the - * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. - */ - #define USB_STREAM_TIMEOUT_MS 100 - #endif - - /* Inline Functions: */ - /** Detaches the device from the USB bus. This has the effect of removing the device from any - * attached host, ceasing USB communications. If no host is present, this prevents any host from - * enumerating the device once attached until \ref USB_Attach() is called. - */ - static inline void USB_Detach(void) ATTR_ALWAYS_INLINE; - static inline void USB_Detach(void) - { - USB.CTRLB &= ~USB_ATTACH_bm; - } - - /** Attaches the device to the USB bus. This announces the device's presence to any attached - * USB host, starting the enumeration process. If no host is present, attaching the device - * will allow for enumeration once a host is connected to the device. - * - * This is inexplicably also required for proper operation while in host mode, to enable the - * attachment of a device to the host. This is despite the bit being located in the device-mode - * register and despite the datasheet making no mention of its requirement in host mode. - */ - static inline void USB_Attach(void) ATTR_ALWAYS_INLINE; - static inline void USB_Attach(void) - { - USB.CTRLB |= USB_ATTACH_bm; - } - - /* Function Prototypes: */ - /** Main function to initialize and start the USB interface. Once active, the USB interface will - * allow for device connection to a host when in device mode, or for device enumeration while in - * host mode. - * - * As the USB library relies on interrupts for the device and host mode enumeration processes, - * the user must enable global interrupts before or shortly after this function is called. In - * device mode, interrupts must be enabled within 500ms of this function being called to ensure - * that the host does not time out whilst enumerating the device. In host mode, interrupts may be - * enabled at the application's leisure however enumeration will not begin of an attached device - * until after this has occurred. - * - * Calling this function when the USB interface is already initialized will cause a complete USB - * interface reset and re-enumeration. - * - * \param[in] Mode This is a mask indicating what mode the USB interface is to be initialized to, a value - * from the \ref USB_Modes_t enum. - * - * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behavior. This should be comprised of - * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the - * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device - * mode speed. - * - * \note To reduce the FLASH requirements of the library if only device or host mode is required, - * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY - * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler - * via the -D switch. If the mode is statically set, this parameter does not exist in the - * function prototype. - * \n\n - * - * \note To reduce the FLASH requirements of the library if only fixed settings are required, - * the options may be set statically in the same manner as the mode (see the Mode parameter of - * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, - * defined to the appropriate options masks. When the options are statically set, this - * parameter does not exist in the function prototype. - * \n\n - * - * \note The mode parameter does not exist on devices where only one mode is possible, such as USB - * AVR models which only implement the USB device mode in hardware. - * - * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks. - */ - void USB_Init( - #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) - const uint8_t Mode - #endif - - #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) - , - #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) - void - #endif - - #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) - const uint8_t Options - #endif - ); - - /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO - * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface - * is restarted with the \ref USB_Init() function. - */ - void USB_Disable(void); - - /** Resets the interface, when already initialized. This will re-enumerate the device if already connected - * to a host, or re-enumerate an already attached device when in host mode. - */ - void USB_ResetInterface(void); - - /* Global Variables: */ - #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__) - /** Indicates the mode that the USB interface is currently initialized to, a value from the - * \ref USB_Modes_t enum. - * - * \attention This variable should be treated as read-only in the user application, and never manually - * changed in value. - * - * \note When the controller is initialized into UID auto-detection mode, this variable will hold the - * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller - * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time - * options, or a limitation of the USB controller in the chosen device model) this will evaluate to - * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the - * USB interface is not initialized. - */ - extern volatile uint8_t USB_CurrentMode; - #elif defined(USB_DEVICE_ONLY) - #define USB_CurrentMode USB_MODE_Device - #endif - - #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) - /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() - * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. - * - * \attention This variable should be treated as read-only in the user application, and never manually - * changed in value. - */ - extern volatile uint8_t USB_Options; - #elif defined(USE_STATIC_OPTIONS) - #define USB_Options USE_STATIC_OPTIONS - #endif - - /* Enums: */ - /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the - * user application via \ref USB_CurrentMode. - */ - enum USB_Modes_t - { - USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */ - USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */ - }; - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Function Prototypes: */ - #if defined(__INCLUDE_FROM_USB_CONTROLLER_C) - static void USB_Init_Device(void); - #endif - - /* Inline Functions: */ - static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE; - static inline void USB_Controller_Enable(void) - { - USB.CTRLA |= USB_ENABLE_bm; - } - - static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE; - static inline void USB_Controller_Disable(void) - { - USB.CTRLA &= ~USB_ENABLE_bm; - } - - static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE; - static inline void USB_Controller_Reset(void) - { - USB.CTRLA &= ~USB_ENABLE_bm; - USB.CTRLA |= USB_ENABLE_bm; - } - - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - -- cgit v1.2.3