From 821563417565776d2dc3a02b0265e6fcd5218739 Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 11 Feb 2013 22:57:40 +0900 Subject: Now includes LUFA-120730 in repository --- .../LUFA-120730/LUFA/Drivers/USB/Core/Events.h | 366 +++++++++++++++++++++ 1 file changed, 366 insertions(+) create mode 100644 protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h (limited to 'protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h') diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h new file mode 100644 index 000000000..33db543d4 --- /dev/null +++ b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h @@ -0,0 +1,366 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Event management definitions. + * \copydetails Group_Events + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_Events USB Events + * \brief USB Event management definitions. + * + * This module contains macros and functions relating to the management of library events, which are small + * pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from + * multiple places in the user or library code, which may or may not be inside an ISR, thus each handler + * should be written to be as small and fast as possible to prevent possible problems. + * + * Events can be hooked by the user application by declaring a handler function with the same name and parameters + * listed here. If an event with no user-associated handler is fired within the library, it by default maps to an + * internal empty stub function. + * + * Each event must only have one associated event handler, but can be raised by multiple sources by calling the + * event handler function (with any required event parameters). + * + * @{ + */ + +#ifndef __USBEVENTS_H__ +#define __USBEVENTS_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Pseudo-Functions for Doxygen: */ + #if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__) + /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role + * mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires + * before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect + * event has fired (if disconnected before the role change). + * + * \note This event only exists on microcontrollers that support dual role USB modes. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY tokens have been supplied + * to the compiler (see \ref Group_USBManagement documentation). + */ + void EVENT_USB_UIDChange(void); + + /** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB + * interface is in host mode. + * + * \param[in] ErrorCode Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); + + /** Event for USB device attachment. This event fires when a the USB interface is in host mode, and + * a USB device has been connected to the USB interface. This is interrupt driven, thus fires before + * the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB + * management task to reduce CPU consumption. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * + * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Host_DeviceAttached(void); + + /** Event for USB device removal. This event fires when a the USB interface is in host mode, and + * a USB device has been removed the USB interface whether or not it has been enumerated. This + * can be used to programmatically stop the USB management task to reduce CPU consumption. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * + * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Host_DeviceUnattached(void); + + /** Event for USB device enumeration failure. This event fires when a the USB interface is + * in host mode, and an attached USB device has failed to enumerate completely. + * + * \param[in] ErrorCode Error code indicating the failure reason, a value in + * \ref USB_Host_EnumerationErrorCodes_t. + * + * \param[in] SubErrorCode Sub error code indicating the reason for failure - for example, if the + * ErrorCode parameter indicates a control error, this will give the error + * code returned by the \ref USB_Host_SendControlRequest() function. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode); + + /** Event for USB device enumeration completion. This event fires when a the USB interface is + * in host mode and an attached USB device has been completely enumerated and is ready to be + * controlled by the user application. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * 1 second) when a transaction is waiting to be processed by the device will prevent break communications + * and cause the host to reset the USB bus. + */ + void EVENT_USB_Host_DeviceEnumerationComplete(void); + + /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB + * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate + * millisecond timer source when the USB bus is not suspended while in host mode. + * + * This event is time-critical; it is run once per millisecond and thus long handlers will significantly + * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. + * + * \note This event is not normally active - it must be manually enabled and disabled via the + * \ref USB_Host_EnableSOFEvents() and \ref USB_Host_DisableSOFEvents() commands after enumeration of + * a USB device. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_StartOfFrame(void); + + /** Event for USB device connection. This event fires when the microcontroller is in USB Device mode + * and the device is connected to a USB host, beginning the enumeration process measured by a rising + * level on the microcontroller's VBUS sense pin. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * two seconds) will prevent the device from enumerating correctly. + * + * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers + * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. + * + * \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available. + * this means that the current connection state is derived from the bus suspension and wake up events by default, + * which is not always accurate (host may suspend the bus while still connected). If the actual connection state + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection + * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. + * \n\n + * + * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Device_Connect(void); + + /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is + * disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin. + * + * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers + * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. + * + * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller. + * this means that the current connection state is derived from the bus suspension and wake up events by default, + * which is not always accurate (host may suspend the bus while still connected). If the actual connection state + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection + * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. + * \n\n + * + * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Device_Disconnect(void); + + /** Event for control requests. This event fires when a the USB host issues a control request + * to the mandatory device control endpoint (of address 0). This may either be a standard + * request that the library may have a handler code for internally, or a class specific request + * issued to the device which must be handled appropriately. If a request is not processed in the + * user application via this event, it will be passed to the library for processing internally + * if a suitable handler exists. + * + * This event is time-critical; each packet within the request transaction must be acknowledged or + * sent within 50ms or the host will abort the transfer. + * + * The library internally handles all standard control requests with the exceptions of SYNC FRAME, + * SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left + * for the user to process via this event if desired. If not handled in the user application or by + * the library internally, unknown requests are automatically STALLed. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note Requests should be handled in the same manner as described in the USB 2.0 Specification, + * or appropriate class specification. In all instances, the library has already read the + * request SETUP parameters into the \ref USB_ControlRequest structure which should then be used + * by the application to determine how to handle the issued request. + */ + void EVENT_USB_Device_ControlRequest(void); + + /** Event for USB configuration number changed. This event fires when a the USB host changes the + * selected configuration number while in device mode. This event should be hooked in device + * applications to create the endpoints and configure the device for the selected configuration. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * one second) will prevent the device from enumerating correctly. + * + * This event fires after the value of \ref USB_Device_ConfigurationNumber has been changed. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_ConfigurationChanged(void); + + /** Event for USB suspend. This event fires when a the USB host suspends the device by halting its + * transmission of Start Of Frame pulses to the device. This is generally hooked in order to move + * the device over to a low power state until the host wakes up the device. If the USB interface is + * enumerated with the \ref USB_OPT_AUTO_PLL option set, the library will automatically suspend the + * USB PLL before the event is fired to save power. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities + * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see + * \ref EVENT_USB_Device_Disconnect. + * + * \see \ref EVENT_USB_Device_WakeUp() event for accompanying Wake Up event. + */ + void EVENT_USB_Device_Suspend(void); + + /** Event for USB wake up. This event fires when a the USB interface is suspended while in device + * mode, and the host wakes up the device by supplying Start Of Frame pulses. This is generally + * hooked to pull the user application out of a low power state and back into normal operating + * mode. If the USB interface is enumerated with the \ref USB_OPT_AUTO_PLL option set, the library + * will automatically restart the USB PLL before the event is fired. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities + * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see + * \ref EVENT_USB_Device_Disconnect. + * + * \see \ref EVENT_USB_Device_Suspend() event for accompanying Suspend event. + */ + void EVENT_USB_Device_WakeUp(void); + + /** Event for USB interface reset. This event fires when the USB interface is in device mode, and + * a the USB host requests that the device reset its interface. This event fires after the control + * endpoint has been automatically configured by the library. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * two seconds) will prevent the device from enumerating correctly. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_Reset(void); + + /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB + * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate + * millisecond timer source when the USB bus is enumerated in device mode to a USB host. + * + * This event is time-critical; it is run once per millisecond and thus long handlers will significantly + * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. + * + * \pre This event is not normally active - it must be manually enabled and disabled via the + * \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration. + * \n\n + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_StartOfFrame(void); + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_EVENTS_C) + void USB_Event_Stub(void) ATTR_CONST; + + #if defined(USB_CAN_BE_BOTH) + void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + + #if defined(USB_CAN_BE_HOST) + void EVENT_USB_Host_HostError(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceAttached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceUnattached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceEnumerationComplete(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode) + ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + + #if defined(USB_CAN_BE_DEVICE) + void EVENT_USB_Device_Connect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Disconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_ControlRequest(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_ConfigurationChanged(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Suspend(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_WakeUp(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Reset(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + -- cgit v1.2.3