From 821563417565776d2dc3a02b0265e6fcd5218739 Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 11 Feb 2013 22:57:40 +0900 Subject: Now includes LUFA-120730 in repository --- .../LUFA/DoxygenPages/DirectorySummaries.txt | 80 ++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt (limited to 'protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt') diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt new file mode 100644 index 000000000..b04224677 --- /dev/null +++ b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt @@ -0,0 +1,80 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \dir Platform + * \brief Platform specific drivers. + * + * This folder contains platform specific drivers and defines for various supported architectures. These may or may + * not be used in a LUFA application, and are provided for convenience purposes. + * + * \dir Drivers + * \brief Library hardware and software drivers. + * + * This folder contains all the library hardware and software drivers for each supported board, architecture and + * microcontroller model. + * + * \dir Drivers/Misc + * \brief Miscellaneous driver files. + * + * This folder contains drivers for aspects other than the USB interface, board hardware or microcontroller peripherals. + * + * \dir Drivers/Peripheral + * \brief Microcontroller peripheral driver files. + * + * This folder contains drivers for various low level microcontroller peripherals, usually located on the microcontroller + * die within the same physical chip. + * + * \dir Drivers/USB + * \brief USB controller peripheral driver files. + * + * This folder contains the complete LUFA USB stack and controller files, including the core driver and stack, as well + * as the USB class driver implementations. + * + * \dir Drivers/USB/Core + * \brief Core USB driver files. + * + * This folder contains the core USB stack and controller driver files, to correctly implement USB functionality on the + * target architecture and microcontroller model. This + * + * \dir Drivers/USB/Class + * \brief USB Class helper driver files. + * + * This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library, + * but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive + * development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications. + * + * \dir Drivers/USB/Class/Device + * \brief USB Device Class helper driver files. + * + * Device mode drivers for the standard USB classes. + * + * \dir Drivers/USB/Class/Host + * \brief USB Host Class helper driver files. + * + * Host mode drivers for the standard USB classes. + * + * \dir Drivers/Board + * \brief Board hardware driver files. + * + * This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from + * the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of + * hardware placed on supported boards. + * + * \dir CodeTemplates + * \brief Code templates for use in LUFA powered applications. + * + * This contains code templates for board drivers, sample LUFA project makefiles and other similar templates that can be copied into + * a LUFA powered application and modified to speed up development. + * + * \dir CodeTemplates/DriverStubs + * \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate. + * + * This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those + * directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files + * copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board, + * the corresponding LUFA board APIs will work correctly with the non-standard board hardware. + */ + -- cgit v1.2.3