From 79603022422cec39ea44686c84a1050acd0c145e Mon Sep 17 00:00:00 2001 From: Michael Terhar Date: Sat, 26 Aug 2017 23:33:33 -0400 Subject: Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-) --- keyboards/gherkin/keymaps/mjt/Makefile | 29 +++ keyboards/gherkin/keymaps/mjt/config.h | 171 +++++++++++++ keyboards/gherkin/keymaps/mjt/keymap.c | 280 ++++++++++++++++++++++ keyboards/hhkb/keymaps/mjt/config.h | 77 ++++++ keyboards/hhkb/keymaps/mjt/keymap.c | 114 +++++++++ keyboards/hhkb/keymaps/mjt/readme.md | 16 ++ keyboards/jd45/keymaps/mjt/Makefile | 21 ++ keyboards/jd45/keymaps/mjt/config.h | 85 +++++++ keyboards/jd45/keymaps/mjt/keymap.c | 80 +++++++ keyboards/jd45/keymaps/mjt/readme.md | 12 + keyboards/jd45/keymaps/mjt/rules.mk | 67 ++++++ keyboards/jd45/keymaps/mjt6u/Makefile | 23 ++ keyboards/jd45/keymaps/mjt6u/config.h | 84 +++++++ keyboards/jd45/keymaps/mjt6u/keymap.c | 149 ++++++++++++ keyboards/jd45/keymaps/mjt6u/readme.md | 23 ++ keyboards/lets_split/keymaps/mjt/Makefile | 25 ++ keyboards/lets_split/keymaps/mjt/config.h | 38 +++ keyboards/lets_split/keymaps/mjt/keymap.c | 217 +++++++++++++++++ keyboards/mitosis/keymaps/mjt/config.h | 74 ++++++ keyboards/mitosis/keymaps/mjt/keymap.c | 329 ++++++++++++++++++++++++++ keyboards/planck/keymaps/mjt/Makefile | 3 + keyboards/planck/keymaps/mjt/config.h | 33 +++ keyboards/planck/keymaps/mjt/keymap.c | 283 ++++++++++++++++++++++ keyboards/planck/keymaps/mjt/readme.md | 22 ++ keyboards/planck/keymaps/mjtnumsym/Makefile | 3 + keyboards/planck/keymaps/mjtnumsym/config.h | 33 +++ keyboards/planck/keymaps/mjtnumsym/keymap.c | 282 ++++++++++++++++++++++ keyboards/planck/keymaps/mjtnumsym/readme.md | 26 ++ keyboards/roadkit/keymaps/flipphone/Makefile | 21 ++ keyboards/roadkit/keymaps/flipphone/config.h | 8 + keyboards/roadkit/keymaps/flipphone/keymap.c | 216 +++++++++++++++++ keyboards/roadkit/keymaps/flipphone/readme.md | 26 ++ keyboards/roadkit/keymaps/mjt/Makefile | 21 ++ keyboards/roadkit/keymaps/mjt/config.h | 8 + keyboards/roadkit/keymaps/mjt/keymap.c | 236 ++++++++++++++++++ keyboards/roadkit/keymaps/mjt/readme.md | 22 ++ keyboards/tv44/keymaps/mjt/Makefile | 21 ++ keyboards/tv44/keymaps/mjt/config.h | 14 ++ keyboards/tv44/keymaps/mjt/keymap.c | 199 ++++++++++++++++ keyboards/tv44/keymaps/mjt/readme.md | 26 ++ 40 files changed, 3417 insertions(+) create mode 100644 keyboards/gherkin/keymaps/mjt/Makefile create mode 100644 keyboards/gherkin/keymaps/mjt/config.h create mode 100644 keyboards/gherkin/keymaps/mjt/keymap.c create mode 100644 keyboards/hhkb/keymaps/mjt/config.h create mode 100644 keyboards/hhkb/keymaps/mjt/keymap.c create mode 100644 keyboards/hhkb/keymaps/mjt/readme.md create mode 100644 keyboards/jd45/keymaps/mjt/Makefile create mode 100644 keyboards/jd45/keymaps/mjt/config.h create mode 100644 keyboards/jd45/keymaps/mjt/keymap.c create mode 100644 keyboards/jd45/keymaps/mjt/readme.md create mode 100644 keyboards/jd45/keymaps/mjt/rules.mk create mode 100644 keyboards/jd45/keymaps/mjt6u/Makefile create mode 100644 keyboards/jd45/keymaps/mjt6u/config.h create mode 100644 keyboards/jd45/keymaps/mjt6u/keymap.c create mode 100644 keyboards/jd45/keymaps/mjt6u/readme.md create mode 100644 keyboards/lets_split/keymaps/mjt/Makefile create mode 100644 keyboards/lets_split/keymaps/mjt/config.h create mode 100644 keyboards/lets_split/keymaps/mjt/keymap.c create mode 100644 keyboards/mitosis/keymaps/mjt/config.h create mode 100644 keyboards/mitosis/keymaps/mjt/keymap.c create mode 100644 keyboards/planck/keymaps/mjt/Makefile create mode 100644 keyboards/planck/keymaps/mjt/config.h create mode 100644 keyboards/planck/keymaps/mjt/keymap.c create mode 100644 keyboards/planck/keymaps/mjt/readme.md create mode 100644 keyboards/planck/keymaps/mjtnumsym/Makefile create mode 100644 keyboards/planck/keymaps/mjtnumsym/config.h create mode 100644 keyboards/planck/keymaps/mjtnumsym/keymap.c create mode 100644 keyboards/planck/keymaps/mjtnumsym/readme.md create mode 100644 keyboards/roadkit/keymaps/flipphone/Makefile create mode 100644 keyboards/roadkit/keymaps/flipphone/config.h create mode 100644 keyboards/roadkit/keymaps/flipphone/keymap.c create mode 100644 keyboards/roadkit/keymaps/flipphone/readme.md create mode 100644 keyboards/roadkit/keymaps/mjt/Makefile create mode 100644 keyboards/roadkit/keymaps/mjt/config.h create mode 100644 keyboards/roadkit/keymaps/mjt/keymap.c create mode 100644 keyboards/roadkit/keymaps/mjt/readme.md create mode 100644 keyboards/tv44/keymaps/mjt/Makefile create mode 100644 keyboards/tv44/keymaps/mjt/config.h create mode 100644 keyboards/tv44/keymaps/mjt/keymap.c create mode 100644 keyboards/tv44/keymaps/mjt/readme.md (limited to 'keyboards') diff --git a/keyboards/gherkin/keymaps/mjt/Makefile b/keyboards/gherkin/keymaps/mjt/Makefile new file mode 100644 index 000000000..b397f86d0 --- /dev/null +++ b/keyboards/gherkin/keymaps/mjt/Makefile @@ -0,0 +1,29 @@ +## not sure where this stuff goes ## +MCU = atmega32u4 +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE=yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/gherkin/keymaps/mjt/config.h b/keyboards/gherkin/keymaps/mjt/config.h new file mode 100644 index 000000000..9c9f03838 --- /dev/null +++ b/keyboards/gherkin/keymaps/mjt/config.h @@ -0,0 +1,171 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Some Guy +#define PRODUCT Gherkin +#define DESCRIPTION 30 percent disaster + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// These are with USB on the left. +// #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } +// original from TMK: #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 } +// #define MATRIX_COL_PINS { D0, D4, F6, D7, E6, B4 } + +// these are with USB on the right. +#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 } + +#define CATERINA_BOOTLOADER + +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_PIN B5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define AUDIO_VOICES + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/gherkin/keymaps/mjt/keymap.c b/keyboards/gherkin/keymaps/mjt/keymap.c new file mode 100644 index 000000000..3dcc3ca09 --- /dev/null +++ b/keyboards/gherkin/keymaps/mjt/keymap.c @@ -0,0 +1,280 @@ +#include "gherkin.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +//Tap Dance Declarations +enum { + TD_Z_LCTL = 0, + TD_X_LGUI = 1, + TD_C_LALT = 2, + TD_A_TAB = 3, + TD_Q_ESC = 4, +// M(0) +}; + +//Friendly Layer Names +enum gherkin_layers { + _QWERTY, + _SONGS, + _NUMBERS, + _SYMBOLS, + _PLOVER, + _ADJUST +}; + +// custom keycodes +enum gherkin_keycodes { + QWERTY = SAFE_RANGE, + NUMBERS, + SYMBOLS, + SONGS, + PLOVER, + BACKLIT, + MACSLEEP, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = KEYMAP( + TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + TD(TD_A_TAB), LT(_SYMBOLS,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(_ADJUST,KC_SPC), + TD(TD_Z_LCTL), TD(TD_X_LGUI), TD(TD_C_LALT), KC_V, KC_B, LT(_NUMBERS, KC_N), KC_M, KC_COMM, KC_DOT, SFT_T(KC_ENT)) + , + [_NUMBERS] = KEYMAP( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_HOME, KC_PGDN, KC_PGUP, KC_END , + KC_F7, KC_F8, KC_F9, KC_F10, LT(_ADJUST,KC_F11), _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT) + , + [_SYMBOLS] = KEYMAP( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, + KC_GRV, _______, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, KC_MINS, KC_EQL , KC_SCLN, KC_QUOT, + KC_TILD, MO(_ADJUST), XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, KC_UNDS, KC_PLUS, S(KC_SCLN), S(KC_QUOT)) + , + [_PLOVER] = KEYMAP( + KC_Q, KC_W, KC_E, KC_R, KC_1, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + EXT_PLV, XXXXXXX, KC_C, KC_V, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX) + , + [_ADJUST] = KEYMAP( + RESET, _______, _______, _______, _______, QWERTY, NUMBERS, SYMBOLS, PLOVER, SONGS, + MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, _______, _______, MACSLEEP, _______, + BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______) +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case NUMBERS: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_dvorak); + #endif + persistant_default_layer_set(1UL<<_NUMBERS); + } + return false; + break; + case SYMBOLS: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_colemak); + #endif + persistant_default_layer_set(1UL<<_SYMBOLS); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(tone_plover); + #endif + layer_off(_NUMBERS); + layer_off(_SYMBOLS); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_plover_gb); + #endif + layer_off(_PLOVER); + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + + +/* +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + keyevent_t event = record->event; + + switch (id) { + case 0: { + if (record->event.pressed) { + key_timer = timer_read(); // if the key is being pressed, we start the timer. + } + else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down"). + if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap. + return MACRO( D(LSFT), END ); + } + else { + return MACRO( T(N), END ); + } + } + break; + } + } + return MACRO_NONE; +}*/ + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_SONG(tone_startup); +} + +void shutdown_user() +{ + PLAY_SONG(tone_goodbye); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif + +void matrix_scan_user(void) { +} + +//Tap Dance Definitions +qk_tap_dance_action_t tap_dance_actions[] = { + //Tap once for Esc, twice for Caps Lock + [TD_Z_LCTL] = ACTION_TAP_DANCE_DOUBLE(KC_Z, KC_LCTL), + [TD_X_LGUI] = ACTION_TAP_DANCE_DOUBLE(KC_X, KC_LGUI), + [TD_C_LALT] = ACTION_TAP_DANCE_DOUBLE(KC_C, KC_LALT), + [TD_A_TAB] = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB), + [TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC) +}; + +// don't know what this is doing... +/* +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + DDRD |= (1 << 5); PORTD &= ~(1 << 5); + } else { + DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRB |= (1 << 0); PORTB &= ~(1 << 0); + } else { + DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} +*/ diff --git a/keyboards/hhkb/keymaps/mjt/config.h b/keyboards/hhkb/keymaps/mjt/config.h new file mode 100644 index 000000000..d38611538 --- /dev/null +++ b/keyboards/hhkb/keymaps/mjt/config.h @@ -0,0 +1,77 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xCAFE +#define DEVICE_VER 0x0104 +#define MANUFACTURER q.m.k +#define PRODUCT HHKB mod +#define DESCRIPTION q.m.k keyboard firmware for HHKB + +/* key matrix size */ +#ifdef HHKB_JP +# define MATRIX_ROWS 16 +#else +# define MATRIX_ROWS 8 +#endif +#define MATRIX_COLS 8 + +#define TAPPING_TERM 200 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +#define USB_MAX_POWER_CONSUMPTION 50 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. +*/ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/hhkb/keymaps/mjt/keymap.c b/keyboards/hhkb/keymaps/mjt/keymap.c new file mode 100644 index 000000000..b5cd99714 --- /dev/null +++ b/keyboards/hhkb/keymaps/mjt/keymap.c @@ -0,0 +1,114 @@ +/* -*- eval: (turn-on-orgtbl); -*- + * default HHKB Layout + */ +#include "hhkb.h" + +#define BASE 0 +#define HHKB 1 +#define FUNK 2 +#define DYN 3 +#define CTL_ESC CTL_T(KC_ESC) +#define MACSLEEP LCTL(LSFT(KC_POWER)) + +enum hhkb_keycodes { + QWERTY = SAFE_RANGE, + DYNKEY, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* BASE Level: Default Layer + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Cont | A | S | D | F | G | H | J | K | L | ; | ' | Ent | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + + |------+------+-----------------------+------+------| + | LAlt | LGUI | ******* Space ******* | RGUI | RAlt | + |------+------+-----------------------+------+------| + */ + + [BASE] = KEYMAP( // default layer + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT), TT(FUNK), \ + KC_LALT, KC_LGUI, /* */ KC_SPC, MO(DYN), KC_RALT), + + + + /* Layer HHKB: HHKB mode (HHKB Fn) + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | | | | | | + | - | End | PgD | Dow | | | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + + |------+------+----------------------+------+------+ + | **** | **** | ******************** | **** | **** | + |------+------+----------------------+------+------+ + + + + [HHKB] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + */ + [FUNK] = KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +[DYN] = KEYMAP( +KC_TRNS, DYN_REC_START1, DYN_REC_START2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, \ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, \ +KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MACSLEEP, KC_HOME, KC_END , KC_TRNS, \ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, DYN_REC_STOP, KC_TRNS, KC_TRNS) + }; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = (keycode == MO(DYN) ? DYN_REC_STOP : keycode); + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + + return true; +} diff --git a/keyboards/hhkb/keymaps/mjt/readme.md b/keyboards/hhkb/keymaps/mjt/readme.md new file mode 100644 index 000000000..ff575ce24 --- /dev/null +++ b/keyboards/hhkb/keymaps/mjt/readme.md @@ -0,0 +1,16 @@ +# Mike's HHKB + +- Surprisingly stock for the most part +- Dynamic macros +- ctrl key has tapkey for escape +- right shift has tapkey for enter +- Works with iPhone Camera Adapter + +## Layers + +Base for letters and mods. + +Funk layer is my tweaked function layer + +Dyn layer has dynamic macros. Record with 1 and 2, playback with \ and +upper-right-most key. Also turns the arrow clusters into nav keys. diff --git a/keyboards/jd45/keymaps/mjt/Makefile b/keyboards/jd45/keymaps/mjt/Makefile new file mode 100644 index 000000000..c92000665 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/jd45/keymaps/mjt/config.h b/keyboards/jd45/keymaps/mjt/config.h new file mode 100644 index 000000000..276639514 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/config.h @@ -0,0 +1,85 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT JD45 +#define DESCRIPTION q.m.k. keyboard firmware for JD45 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { F0, F1, F5, B4 } +#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +#define USB_MAX_POWER_CONSUMPTION 50 +#define BACKLIGHT_BREATHING + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/jd45/keymaps/mjt/keymap.c b/keyboards/jd45/keymaps/mjt/keymap.c new file mode 100644 index 000000000..1a7302216 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/keymap.c @@ -0,0 +1,80 @@ +#include "jd45.h" + +/* Mike's Layout for JD45 with backlight LEDs acting as layer indicator + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, BSLS, + FN1, A, S, D, F, G, H, J, K, L, QUOT, ENT, + FN0, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, + NO, LCTL, LALT, LGUI, SPC, BSPC, APP, FN2, ESC, NO ), +[1] = KEYMAP( +GRV, TRNS, UP, TRNS, 7, 8, 9, 0, MINS, EQL, PSCR, LBRC, RBRC, +TRNS, LEFT, DOWN, RGHT, 4, 5, 6, INS, HOME, PGUP, SCLN, TRNS, +TRNS, TRNS, TRNS, TRNS, 1, 2, 3, DEL, END, PGDN, TRNS, TRNS, +TRNS, TRNS, TRNS, SPC, TRNS, DEL, TRNS, FN3, TRNS, TRNS ), +[2] = KEYMAP( +TRNS, TRNS, VOLU, TRNS, F7, F8, F9, F10, F11, F12, PSCR, FN3, FN4, +TRNS, MPRV, VOLD, MNXT, F4, F5, F6, J, K, L, SCLN, TRNS, +TRNS, TRNS, TRNS, TRNS, F1, F2, F3, MUTE, MPRV, MNXT, MSTP, TRNS, +TRNS, TRNS, TRNS, LGUI, TRNS, TRNS, TRNS, TRNS, PAUS, TRNS ) +/* , +[3] = KEYMAP( +TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, +TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, +TRNS, TRNS, TRNS, TRNS, TRNS, BTLD, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, +TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS )*/ +}; + +enum macro_id { + M_LAYER1, + M_LAYER2 +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_TOGGLE(MOD_LSFT), + // [1] = ACTION_LAYER_TAP_TOGGLE(1), + [1] = ACTION_MACRO(M_LAYER1), + [2] = ACTION_LAYER_TAP_TOGGLE(2), + [3] = ACTION_BACKLIGHT_STEP(), + [4] = ACTION_BACKLIGHT_TOGGLE() +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case M_LAYER1: + // need to add a timer for doubletap: https://github.com/jackhumbert/qmk_firmware/wiki#timer-functionality + // action_function_tap may also handle this... + if (record->event.pressed) + { + breathing_speed_set(3); + breathing_enable(); + layer_on(1); + } + else + { + breathing_speed_set(1); + breathing_self_disable(); + layer_off(1); + } + break; + case M_LAYER2: + if (record->event.pressed) + { + breathing_speed_set(2); + breathing_pulse(); + layer_on(2); + } + else + { + breathing_speed_set(1); + breathing_self_disable(); + layer_off(2); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/jd45/keymaps/mjt/readme.md b/keyboards/jd45/keymaps/mjt/readme.md new file mode 100644 index 000000000..54bdb8346 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/readme.md @@ -0,0 +1,12 @@ +# Mike's JD45 standard layout + +- Backlight that matches active layer +- Works with iPhone Camera Adapter + +## Layers + +Base for letters and mods. + +Function 1 layer adds a centered numpad to the board + +Function 2 layer replaces the numpad numbers with Fkeys. diff --git a/keyboards/jd45/keymaps/mjt/rules.mk b/keyboards/jd45/keymaps/mjt/rules.mk new file mode 100644 index 000000000..6eec21160 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt/rules.mk @@ -0,0 +1,67 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +# UNICODE_ENABLE = YES # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/jd45/keymaps/mjt6u/Makefile b/keyboards/jd45/keymaps/mjt6u/Makefile new file mode 100644 index 000000000..f9cec3b84 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/Makefile @@ -0,0 +1,23 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +DEBUG_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/jd45/keymaps/mjt6u/config.h b/keyboards/jd45/keymaps/mjt6u/config.h new file mode 100644 index 000000000..bf9dc6df3 --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/config.h @@ -0,0 +1,84 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT JD45 +#define DESCRIPTION q.m.k. keyboard firmware for JD45 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { F0, F1, F5, B4 } +#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +#define USB_MAX_POWER_CONSUMPTION 50 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/jd45/keymaps/mjt6u/keymap.c b/keyboards/jd45/keymaps/mjt6u/keymap.c new file mode 100644 index 000000000..44f0c31db --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/keymap.c @@ -0,0 +1,149 @@ +#include "jd45.h" + +enum jd45_layers +{ + _QWERTY, + _QWERTYNUMMODS, + _NUMSYM, + _FUNCTION, + _NUMPAD, + _FKEYNUMPAD, + _ADJUST +}; + +enum jd45_keycodes +{ + NUMSYM = SAFE_RANGE, + MACSLEEP, + USEFNMODS, + USENUMMODS, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +#define LONGPRESS_DELAY 150 +#define LAYER_TOGGLE_DELAY 900 + +#define _______ KC_TRNS +#define __MOD__ KC_TRNS +#define XXXXXXX KC_NO +#define F_FNSPC F(0) +#define F_NUMSPC F(1) +#define F_FNTAB F(2) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = { + {F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC}, + {CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)}, + { XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_FNSPC, XXXXXXX, XXXXXXX, MO(_FUNCTION), MO(_ADJUST) } +}, +[_QWERTYNUMMODS] = { + {F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC}, + {CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)}, + {XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_NUMSPC, XXXXXXX, XXXXXXX, MO(_FKEYNUMPAD), MO(_ADJUST) } +}, +[_NUMSYM] = { +{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, KC_DEL}, + {__MOD__, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______}, + {_______, _______, _______, _______, _______, KC_SPC, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______}, +{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__} +}, +[_FUNCTION] = { +{__MOD__, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, +{__MOD__, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, _______, _______}, +{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, +{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__ , __MOD__} +}, +[_NUMPAD] = { +{KC_GRV, _______, KC_UP, _______, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PSCR, KC_LBRC, KC_RBRC}, +{_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_4, KC_5, KC_6, KC_INS, KC_HOME, KC_PGUP, _______, _______}, +{_______, _______, _______, _______, KC_1, KC_2, KC_3, KC_DEL, KC_END, KC_PGDN, _______, _______}, +{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__} +}, +[_FKEYNUMPAD] = { +{_______, _______, KC_VOLU, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, _______, _______}, +{_______, KC_MPRV, KC_VOLD, KC_MNXT, KC_F4, KC_F5, KC_F6, KC_J, KC_K, KC_L, KC_SCLN, _______}, +{_______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_MUTE, KC_MPRV, KC_MNXT, KC_MSTP, _______}, +{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__ } +}, +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______, KC_PSCR, _______, _______}, + { _______, _______, _______, _______, USEFNMODS, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, MACSLEEP, _______, _______}, + { _______, _______, _______, _______, _______, _______, USENUMMODS, _______, _______, _______, _______, _______}, + {XXXXXXX, _______, _______,XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__} + } +}; + + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_NUMSYM, KC_SPC), + [1] = ACTION_LAYER_TAP_KEY(_NUMPAD, KC_SPC), + [2] = ACTION_LAYER_TAP_KEY(_FUNCTION, KC_TAB), +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +static bool singular_key = false; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = (keycode == MO(_ADJUST) ? DYN_REC_STOP : keycode); + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + println(" "); + print("process record"); + + switch (keycode) { + case MACSLEEP: + if (record->event.pressed) { + // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + case USEFNMODS: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_fnpc, false, 0); + #endif + print("Space-FN"); + } + return false; + break; + case USENUMMODS: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTYNUMMODS); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_fnmac, false, 0); + #endif + print("Space-Numpad"); + } + return false; + break; + default: + singular_key = false; + break; + } + + return true; +}; + + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif + // debug_enable = true; +} diff --git a/keyboards/jd45/keymaps/mjt6u/readme.md b/keyboards/jd45/keymaps/mjt6u/readme.md new file mode 100644 index 000000000..a43ddf5fc --- /dev/null +++ b/keyboards/jd45/keymaps/mjt6u/readme.md @@ -0,0 +1,23 @@ +# Mike's JD45 with 6u Spacebar + +- Early draft of numsym that misses a lot of symbols +- Numpad layer available for evaluation +- Works with iPhone Camera Adapter +- Dynamic macros + +## Layers + +Qwerty for letters and mods. + +Qwertymods layer switches some Modifiers around + +Numsym puts the number keys across the top row like a Planck. Arrows are on hjkl +which makes the other NumSym dynamic from my other boards fall apart + +Function layer replaces the top row numbers with Fkeys. + +Numpad layer makes a number pad in the center. + +Fkeynumpad replaces the numpad numbers with Fkeys. + +Adjust layer has macros and configuration. diff --git a/keyboards/lets_split/keymaps/mjt/Makefile b/keyboards/lets_split/keymaps/mjt/Makefile new file mode 100644 index 000000000..90616d1f1 --- /dev/null +++ b/keyboards/lets_split/keymaps/mjt/Makefile @@ -0,0 +1,25 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +ONEHAND_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/mjt/config.h b/keyboards/lets_split/keymaps/mjt/config.h new file mode 100644 index 000000000..dc9fa5b5c --- /dev/null +++ b/keyboards/lets_split/keymaps/mjt/config.h @@ -0,0 +1,38 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 10 \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/mjt/keymap.c b/keyboards/lets_split/keymaps/mjt/keymap.c new file mode 100644 index 000000000..4dd0d9aa9 --- /dev/null +++ b/keyboards/lets_split/keymaps/mjt/keymap.c @@ -0,0 +1,217 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} \ No newline at end of file diff --git a/keyboards/mitosis/keymaps/mjt/config.h b/keyboards/mitosis/keymaps/mjt/config.h new file mode 100644 index 000000000..2209a9e0d --- /dev/null +++ b/keyboards/mitosis/keymaps/mjt/config.h @@ -0,0 +1,74 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEEB +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MJT +#define PRODUCT Mitosis +#define DESCRIPTION q.m.k. keyboard firmware for Mitosis + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 10 + +// fix iPhone power adapter issue +#define USB_MAX_POWER_CONSUMPTION 50 +// #define CATERINA_BOOTLOADER + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +#define PREVENT_STUCK_MODIFIERS + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) + +#endif diff --git a/keyboards/mitosis/keymaps/mjt/keymap.c b/keyboards/mitosis/keymaps/mjt/keymap.c new file mode 100644 index 000000000..01443d5f4 --- /dev/null +++ b/keyboards/mitosis/keymaps/mjt/keymap.c @@ -0,0 +1,329 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "mitosis.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum mitosis_layers +{ + _QWERTY, + _SHIFTED, + _FUNCTIONPC, + _FUNCTIONMAC, + _FUNCSHIFT, + _ADJUST +}; + +enum mitosis_keycodes +{ + FNKEY = SAFE_RANGE, + SHIFT, + MACSLEEP, + FNMAC, + FNPC, + DYNAMIC_MACRO_RANGE, +}; + + +// Macro definitions for readability +enum mitosis_macros +{ + VOLU, + VOLD, + ESCM +}; + + +#include "dynamic_macro.h" + +#define LONGPRESS_DELAY 150 +#define LAYER_TOGGLE_DELAY 900 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define __MOD__ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = { /* QWERTY adapted to this crazy thing */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN }, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, + {XXXXXXX, KC_LCTL, M(ESCM), KC_TAB, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, XXXXXXX }, + {XXXXXXX, KC_LALT, KC_LGUI, KC_SPC, SHIFT, FNKEY, KC_BSPC, KC_ENT, MO(_ADJUST), XXXXXXX } + }, + + + [_SHIFTED] = { /* Shifted Layer, layered so that tri_layer can be used, or selectively + able to modify individual key's shifted behaviour */ + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {XXXXXXX, __MOD__, KC_DEL, _______, _______, _______, _______, _______, _______, XXXXXXX }, + {XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, _______, KC_NO, XXXXXXX } + }, + + + [_FUNCTIONPC] = { /* Function Layer mimicks planck's raise layer somewhat */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 }, + {LCTL(KC_A), LCTL(KC_S), _______, LCTL(KC_F),_______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC }, + {LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V),_______, _______, KC_BSLS, _______, _______, KC_QUOT }, + {XXXXXXX, __MOD__, KC_DEL, _______, KC_GRV, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX }, + {XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, KC_PSCR, KC_NO, XXXXXXX } + }, + + [_FUNCTIONMAC] = { /* Function Layer mimicks planck's raise layer somewhat */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 }, + {LGUI(KC_A), LGUI(KC_S), _______, LGUI(KC_F),_______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC }, + {LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V),_______, _______, KC_BSLS, _______, _______, KC_QUOT }, + {XXXXXXX, __MOD__, KC_DEL, _______, KC_GRV, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX }, + {XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, KC_PSCR, KC_NO, XXXXXXX } + }, + + [_FUNCSHIFT] = { /* Function Shifted Layer mimicks planck's lower layer somewhat */ + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_LCBR, KC_RCBR }, + {KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______ }, + {XXXXXXX, __MOD__, KC_DEL, _______, KC_TILD, _______, _______, _______, _______, XXXXXXX }, + {XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, _______, _______, XXXXXXX } + }, + + + [_ADJUST] = { /* Adjust layer for fancy stuff and macros */ + {RESET, FNPC, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______, _______ }, + {FNMAC, _______, AU_ON, AU_OFF, _______, _______, _______, _______, MACSLEEP, _______ }, + {MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY }, + {XXXXXXX, __MOD__, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, XXXXXXX }, + {XXXXXXX, __MOD__, __MOD__, _______, __MOD__, __MOD__, _______, _______, __MOD__, XXXXXXX } + } + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND); +float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND); +float tone_fnpc[][2] = SONG(PLOVER_SOUND); +float tone_fnmac[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +const uint16_t PROGMEM fn_actions[] = { + +}; +static uint16_t function_layer = _FUNCTIONMAC; +static uint16_t key_timer; + +void persistent_function_layer_set(uint16_t new_function_layer) { + // eeconfig_update_function_layer(new_function_layer); + function_layer = new_function_layer; + // should clear layers to avoid getting stuck. +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + + //switch multiplexing for media, short tap for volume up, long press for play/pause + case VOLU: + if (record->event.pressed) { + key_timer = timer_read(); // if the key is being pressed, we start the timer. + } else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down"). + if (timer_elapsed(key_timer) > LONGPRESS_DELAY) { // LONGPRESS_DELAY being 150ms, the threshhold we pick for counting something as a tap. + return MACRO(T(MPLY), END); + } else { + return MACRO(T(VOLU), END); + } + } + break; + + //switch multiplexing for media, short tap for volume down, long press for next track + case VOLD: + if (record->event.pressed) { + key_timer = timer_read(); + } else { + if (timer_elapsed(key_timer) > LONGPRESS_DELAY) { + return MACRO(T(MNXT), END); + } else { + return MACRO(T(VOLD), END); + } + } + break; + + //switch multiplexing for escape, short tap for escape, long press for context menu + case ESCM: + if (record->event.pressed) { + key_timer = timer_read(); + } else { + if (timer_elapsed(key_timer) > LONGPRESS_DELAY) { + return MACRO(T(APP), END); + } else { + return MACRO(T(ESC), END); + } + } + break; + } + return MACRO_NONE; +}; + +static bool singular_key = false; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = (keycode == MO(_ADJUST) ? DYN_REC_STOP : keycode); + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + uint8_t layer; + layer = biton32(layer_state); // get the current layer + + //custom layer handling for tri_layer, + switch (keycode) { + case MACSLEEP: + if (record->event.pressed) { + // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + case FNKEY: + if (record->event.pressed) { + key_timer = timer_read(); + singular_key = true; + // layer_on(_FUNCTION); + layer_on(function_layer); + } else { + if (timer_elapsed(key_timer) < LAYER_TOGGLE_DELAY || !singular_key) { + layer_off(function_layer); + } + } + update_tri_layer(function_layer, _SHIFTED, _FUNCSHIFT); + return false; + break; + //SHIFT is handled as LSHIFT in the general case + case SHIFT: + if (record->event.pressed) { + key_timer = timer_read(); + singular_key = true; + layer_on(_SHIFTED); + register_code(KC_LSFT); + } else { + if (timer_elapsed(key_timer) < LAYER_TOGGLE_DELAY || !singular_key) { + layer_off(_SHIFTED); + unregister_code(KC_LSFT); + } + } + update_tri_layer(function_layer, _SHIFTED, _FUNCSHIFT); + return false; + break; + case FNPC: + if (record->event.pressed) { + persistent_function_layer_set(_FUNCTIONPC); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_fnpc, false, 0); + #endif + } + return false; + break; + case FNMAC: + if (record->event.pressed) { + persistent_function_layer_set(_FUNCTIONMAC); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_fnmac, false, 0); + #endif + } + return false; + break; + //If any other key was pressed during the layer mod hold period, + //then the layer mod was used momentarily, and should block latching + default: + singular_key = false; + break; + } + + //FUNCSHIFT has been shifted by the SHIFT handling, some keys need to be excluded + if (layer == _FUNCSHIFT) { + //F1-F12 should be sent as unshifted keycodes, + //and ] needs to be unshifted or it is sent as } + if ( (keycode >= KC_F1 && keycode <= KC_F12) + || keycode == KC_RBRC ) { + if (record->event.pressed) { + unregister_mods(MOD_LSFT); + } else { + register_mods(MOD_LSFT); + } + } + } + + return true; +}; + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + switch (layer) { + case _QWERTY: + set_led_off; + break; + case _FUNCTIONMAC: + set_led_blue; + break; + case _FUNCTIONPC: + set_led_cyan; + break; + case _SHIFTED: + set_led_red; + break; + case _FUNCSHIFT: + set_led_green; + break; + case _ADJUST: + set_led_white; + break; + default: + break; + } +}; diff --git a/keyboards/planck/keymaps/mjt/Makefile b/keyboards/planck/keymaps/mjt/Makefile new file mode 100644 index 000000000..457a3d01d --- /dev/null +++ b/keyboards/planck/keymaps/mjt/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/mjt/config.h b/keyboards/planck/keymaps/mjt/config.h new file mode 100644 index 000000000..4072c5d7f --- /dev/null +++ b/keyboards/planck/keymaps/mjt/config.h @@ -0,0 +1,33 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +// #define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +// fix iPhone power adapter issue + +#define USB_MAX_POWER_CONSUMPTION 50 + +#endif diff --git a/keyboards/planck/keymaps/mjt/keymap.c b/keyboards/planck/keymaps/mjt/keymap.c new file mode 100644 index 000000000..599dedf98 --- /dev/null +++ b/keyboards/planck/keymaps/mjt/keymap.c @@ -0,0 +1,283 @@ +// This is MJT's bastardization of the planck and minivan defaults + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +enum planck_layers { + _QWERTY, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST, + _DYN +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT) }, + {MO(_DYN), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Dn |Pg Up | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Home |Pg Dn |Pg Up | End | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGDN, KC_PGUP, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | |Pause |PR SC | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| |Sleep |Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |TogLED| | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______ , RESET, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PSCR, KC_DEL }, + {_______ , _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, MACSLEEP, PLOVER, _______}, + {_______ , MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, +[_DYN] = { + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______ }, + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______} +} + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND); +float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode); + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(tone_plover); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_plover_gb); + #endif + layer_off(_PLOVER); + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_SONG(tone_startup); +} + +void shutdown_user() +{ + PLAY_SONG(tone_goodbye); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif diff --git a/keyboards/planck/keymaps/mjt/readme.md b/keyboards/planck/keymaps/mjt/readme.md new file mode 100644 index 000000000..ce4d90f21 --- /dev/null +++ b/keyboards/planck/keymaps/mjt/readme.md @@ -0,0 +1,22 @@ +# Mike's Plancklike Planck + +- Music/Audio +- Dynamic Macros +- Media Keys +- Works with iPhone Camera Adapter + +## Layers + +Qwerty for letters and mods. + +Raise and Lower are mostly default with a few tweaks. + +Adjust layer is tough to get to so it is only for keyboard configuration stuff. + +## Dynamic Macros + +Hold TAB key, then press ";" to record macro 1 and "'" to record macro 2. + +When you are done recording, press TAB again. + +For playback of macros, TAB+"," plays macro 1 and TAB+","plays macro 2. diff --git a/keyboards/planck/keymaps/mjtnumsym/Makefile b/keyboards/planck/keymaps/mjtnumsym/Makefile new file mode 100644 index 000000000..457a3d01d --- /dev/null +++ b/keyboards/planck/keymaps/mjtnumsym/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/mjtnumsym/config.h b/keyboards/planck/keymaps/mjtnumsym/config.h new file mode 100644 index 000000000..4072c5d7f --- /dev/null +++ b/keyboards/planck/keymaps/mjtnumsym/config.h @@ -0,0 +1,33 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +// #define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +// fix iPhone power adapter issue + +#define USB_MAX_POWER_CONSUMPTION 50 + +#endif diff --git a/keyboards/planck/keymaps/mjtnumsym/keymap.c b/keyboards/planck/keymaps/mjtnumsym/keymap.c new file mode 100644 index 000000000..0be016fb7 --- /dev/null +++ b/keyboards/planck/keymaps/mjtnumsym/keymap.c @@ -0,0 +1,282 @@ +// This is MJT's bastardization of the planck and minivan defaults + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +enum planck_layers { + _QWERTY, + _FKEYS, + _NUMSYM, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + PLOVER, + FKEYS, + NUMSYM, + BACKLIT, + EXT_PLV, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |FKEYS | Space |NUMSYM | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT) }, + {KC_LCTL, KC_LCTL, KC_LALT, KC_LGUI, FKEYS, KC_SPC, KC_SPC, NUMSYM, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* FKEYS + * ,-----------------------------------------------------------------------------------. + * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F11 | F12 | F13 | F14 | F15 | | |Sleep | | Rec1 | Rec2 | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | Mac1 | Mac2 | | Stop | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_FKEYS] = { + {KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______}, + {KC_DEL, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F6, _______, _______, MACSLEEP, DYN_REC_START1, DYN_REC_START2}, + {_______, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, DYN_REC_STOP}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* NUMSYM + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | ! | @ | # | $ | % | ^ | & | * | ( | ) | ' | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | _ | + | { | } | | | - | = | [ | ] | \ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Home |Pg Dn |Pg Up | End | + * `-----------------------------------------------------------------------------------' + */ +[_NUMSYM] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______}, + {_______,KC_UNDS, KC_PLUS,KC_LCBR, KC_RCBR, KC_PIPE, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (FKEYS + NUMSYM) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | |Pause |PR SC | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| |Sleep |Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |TogLED| | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______ , RESET, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PSCR, KC_DEL }, + {_______ , _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, MACSLEEP, PLOVER, _______}, + {_______ , MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} /*, +[_DYN] = { + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______ }, + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______} +}*/ + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND); +float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = (keycode == FKEYS ? DYN_REC_STOP : keycode); + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case FKEYS: + if (record->event.pressed) { + layer_on(_FKEYS); + update_tri_layer(_FKEYS, _NUMSYM, _ADJUST); + } else { + layer_off(_FKEYS); + update_tri_layer(_FKEYS, _NUMSYM, _ADJUST); + } + return false; + break; + case NUMSYM: + if (record->event.pressed) { + layer_on(_NUMSYM); + update_tri_layer(_FKEYS, _NUMSYM, _ADJUST); + } else { + layer_off(_NUMSYM); + update_tri_layer(_FKEYS, _NUMSYM, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(tone_plover); + #endif + layer_off(_NUMSYM); + layer_off(_FKEYS); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_plover_gb); + #endif + layer_off(_PLOVER); + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_SONG(tone_startup); +} + +void shutdown_user() +{ + PLAY_SONG(tone_goodbye); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif diff --git a/keyboards/planck/keymaps/mjtnumsym/readme.md b/keyboards/planck/keymaps/mjtnumsym/readme.md new file mode 100644 index 000000000..ba6d05144 --- /dev/null +++ b/keyboards/planck/keymaps/mjtnumsym/readme.md @@ -0,0 +1,26 @@ +# Mike's Rethought Planck + +- Music/Audio +- Dynamic Macros +- Media Keys +- Works with iPhone Camera Adapter + +## Layers + +Qwerty for letters and mods. + +Numsym for all numbers and symbols used in typing. Follows a similar approach to +planck but puts both on the same layer eschewing the F-keys. + +Fkeys layer is for the seldom used stuff like F-keys and some additional features +such as dynamic macros, media keys, and a sleep shortcut for OS X. + +Adjust layer is mainly for keyboard configuration stuff. + +## Dynamic Macros + +Hold TAB key, then press ";" to record macro 1 and "'" to record macro 2. + +When you are done recording, press TAB again. + +For playback of macros, TAB+"," plays macro 1 and TAB+","plays macro 2. diff --git a/keyboards/roadkit/keymaps/flipphone/Makefile b/keyboards/roadkit/keymaps/flipphone/Makefile new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/roadkit/keymaps/flipphone/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/roadkit/keymaps/flipphone/config.h b/keyboards/roadkit/keymaps/flipphone/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/roadkit/keymaps/flipphone/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/roadkit/keymaps/flipphone/keymap.c b/keyboards/roadkit/keymaps/flipphone/keymap.c new file mode 100644 index 000000000..b48d72e9e --- /dev/null +++ b/keyboards/roadkit/keymaps/flipphone/keymap.c @@ -0,0 +1,216 @@ +#include "roadkit.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +void backlight_toggle(void){ +}; + +enum roadkit_layers { + _NUMPAD, + _FPH, + _FPHNOISY, + _ADJUST, + _DYN +}; + +enum roadkit_keycodes { + NUMPAD = SAFE_RANGE, + FPH_1, + FPH_2, + FPH_3, + FPH_4, + FPH_5, + FPH_6, + FPH_7, + FPH_8, + FPH_9, + FN_0, + BACKLIT, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make keymaps cleaner looking +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NUMPAD] = /* Numpad */ + KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ + LT(_ADJUST, KC_KP_0), KC_KP_DOT), + [_FPH] = /* Quiet T9 */ + KEYMAP(FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ + FPH_4, FPH_5, FPH_6, \ + FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ + LT(_ADJUST, KC_SPACE), KC_KP_DOT), + [_FPHNOISY] = /* Noisy T9 */ + KEYMAP(FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ + FPH_4, FPH_5, FPH_6, \ + FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ + LT(_ADJUST, KC_SPACE), KC_KP_DOT), + [_ADJUST] = /* Adjustments */ + KEYMAP(KC_NUMLOCK, TG(_FPHNOISY), TG(_FPH), TG(_NUMPAD), \ + KC_BSPC, BACKLIT, KC_DEL, \ + MACSLEEP, _______, _______, _______, \ + _______, MO(_DYN)), + [_DYN] = /* DYNAMIC MACRO */ + KEYMAP(DYN_REC_START1, DYN_REC_START2, _______, DYN_REC_STOP, \ + _______, _______, _______, \ + DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ + _______, _______), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +uint16_t fph_tap_qty = false; +uint16_t fph_keycode = 0; // stores which spacebar was used, either raise or lower... + +uint16_t get_render_keycode(uint16_t keycode, uint16_t tap_qty){ // maybe replace shift with "mods" + tap_qty--; // reduce by one to match array indexes. + switch(keycode){ + case FPH_2: + {uint16_t kc[] = {KC_A, KC_B, KC_C}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_3: + {uint16_t kc[] = {KC_D, KC_E, KC_F}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_4: + {uint16_t kc[] = {KC_G, KC_H, KC_I}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_5: + {uint16_t kc[] = {KC_J, KC_K, KC_L}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_6: + {uint16_t kc[] = {KC_M, KC_N, KC_O}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_7: + {uint16_t kc[] = {KC_P, KC_Q, KC_R, KC_S}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_8: + {uint16_t kc[] = {KC_T, KC_U, KC_V}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_9: + {uint16_t kc[] = {KC_W, KC_X, KC_Y, KC_Z}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_1: + {uint16_t kc[] = {KC_COMM, LSFT(KC_SLSH), KC_EXLM, KC_AT, KC_MINS, KC_UNDS, KC_PLUS, \ + KC_SCLN, LSFT(KC_SCLN), KC_QUOT, LSFT(KC_QUOT), KC_TILD, \ + KC_PIPE, KC_BSLS, KC_HASH, LSFT(KC_4), KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, \ + KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, LSFT(KC_COMM), LSFT(KC_DOT)}; + return kc[tap_qty % 26];} + } + return KC_NO; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_dynamic_macro(keycode, record)) { + return false; + } + uint8_t layer; + layer = biton32(layer_state); + + switch (keycode) { + case FPH_1 ... FPH_9: + if(layer == _FPHNOISY){ + if (record->event.pressed) { + if(fph_keycode != keycode) { // key change + fph_tap_qty = 0; + fph_keycode = keycode; + } else { // same key tapped again so erase and increment. + register_code(KC_BSPC); + unregister_code(KC_BSPC); + fph_tap_qty++; + } + uint16_t render_keycode = get_render_keycode(keycode, fph_tap_qty); + // find mods? Apply mods.. + register_code(render_keycode); + unregister_code(render_keycode); + } else { + // do we need to do anything on key-release? + } + } else { // not noisy, be demure . + if (record->event.pressed) { + if(fph_keycode != keycode) { // key change, kill everything. + uint16_t render_keycode = get_render_keycode(fph_keycode, fph_tap_qty); + // find mods? Apply mods.. + register_code(render_keycode); + unregister_code(render_keycode); + fph_keycode = keycode; + fph_tap_qty = 0; + } else { // same key tapped again so increment counter silently + fph_tap_qty++; + } + } else { + // do we need to do anything on key-release? + // maybe start a timer on this one? + } + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} diff --git a/keyboards/roadkit/keymaps/flipphone/readme.md b/keyboards/roadkit/keymaps/flipphone/readme.md new file mode 100644 index 000000000..ad630be19 --- /dev/null +++ b/keyboards/roadkit/keymaps/flipphone/readme.md @@ -0,0 +1,26 @@ +# Flip Phone layout for Roadkit + +BEWARE, THIS DOES NOT WORK YET. + +Uses the numpad with classic cellular phone style letters assigned to the numbers. + +# LAYERS + +* Numpad - The layer that matches the caps mostly +* FPH - Base layer for text +* FPHNOISY - Text layer that outputs every character and then backspaces as they're replaced +* DYN - dynamic macro layer for recording and playing macros + +## FPH + +Poke the "2" key twice and it makes "B". + +## FPHNOISY + +Poke the "2" key twice and it makes "A"+backspace+"B" so you can see it cycle through. + +## MACROS + +May be able to record macros with the T9 layer because the "KC_*"s are only sent +at the end. Trying to do a macro with T9NOISY would probably fill up the buffer +in just a few characters. diff --git a/keyboards/roadkit/keymaps/mjt/Makefile b/keyboards/roadkit/keymaps/mjt/Makefile new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/roadkit/keymaps/mjt/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/roadkit/keymaps/mjt/config.h b/keyboards/roadkit/keymaps/mjt/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/roadkit/keymaps/mjt/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/roadkit/keymaps/mjt/keymap.c b/keyboards/roadkit/keymaps/mjt/keymap.c new file mode 100644 index 000000000..d3c82ac84 --- /dev/null +++ b/keyboards/roadkit/keymaps/mjt/keymap.c @@ -0,0 +1,236 @@ +#include "roadkit.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +void backlight_toggle(void){ +}; + +enum roadkit_layers { + _NUMPAD, + _NAVIGATION, + _EXCEL, + _ADJUST, + _DYN +}; + +enum minivan_keycodes { + NUMPAD = SAFE_RANGE, + NAVIGATION, + EXCEL, + NUMPAD_LOCK, + NAVIGATION_LOCK, + EXCEL_LOCK, + PARENS, + BRACKETS, + BRACES, + BACKLIT, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make keymaps cleaner looking +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NUMPAD] = /* Numpad */ + KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, \ + KC_KP_1, KC_KP_2, KC_KP_3, NAVIGATION, \ + EXCEL, KC_KP_DOT), + [_EXCEL] = /* Excel related */ + KEYMAP(KC_KP_SLASH, KC_KP_ASTERISK, KC_MINS, KC_TAB, \ + KC_QUOT, KC_KP_EQUAL, PARENS , \ + KC_DQT, BRACKETS, BRACES, _______, \ + _______, MO(_DYN)), + [_NAVIGATION] = /* Navigation */ + KEYMAP(KC_HOME, _______, KC_PGUP, KC_TAB, \ + KC_END, KC_UP, KC_PGDN, \ + KC_LEFT, KC_DOWN, KC_RIGHT, _______, \ + _______, MO(_DYN)), + [_ADJUST] = /* Adjustments */ + KEYMAP(KC_NUMLOCK, MACSLEEP, BACKLIT, _______, \ + KC_BSPC, _______, KC_DEL, \ + EXCEL_LOCK, NUMPAD_LOCK, NAVIGATION_LOCK, _______, \ + _______, _______), + [_DYN] = /* DYNAMIC MACRO */ + KEYMAP(DYN_REC_START1, DYN_REC_START2, _______, _______, \ + _______, _______, _______, \ + DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ + _______, _______), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_numpad[][2] = SONG(QWERTY_SOUND); +float tone_excel[][2] = SONG(DVORAK_SOUND); +float tone_navigation[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool fn_tap_used = false; // sets to false when space is pressed, + // sets to true when any other key is pressed, + //when space is lifted, if another key was prssed, don't send space. +uint16_t fn_keycode = 0; // stores which spacebar was used, either raise or lower... + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_dynamic_macro(keycode, record)) { + return false; + } + + switch (keycode) { + case NAVIGATION: // This key is enter if tapped, navigation if held + if (record->event.pressed) { + fn_keycode = NAVIGATION; // these two lines figure out if the next action is + fn_tap_used = false; + layer_on(_NAVIGATION); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + } else { + layer_off(_NAVIGATION); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + if(!fn_tap_used && fn_keycode == NAVIGATION ){ + register_code(KC_KP_ENTER); + unregister_code(KC_KP_ENTER); + fn_keycode = 0; + fn_tap_used = false; + } + } + return false; + break; + case EXCEL: + if (record->event.pressed) { + fn_keycode = EXCEL; + fn_tap_used = false; + layer_on(_EXCEL); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + } else { + layer_off(_EXCEL); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + if(!fn_tap_used && fn_keycode == EXCEL ){ + register_code(KC_KP_0); + unregister_code(KC_KP_0); + fn_keycode = 0; + fn_tap_used = false; + } + } + return false; + break; + default: + fn_tap_used = true; + break; // don't return because this just handles the spacebars. + } + // this is the normal keycode processing switch from Planck default layout. + switch (keycode) { + case NUMPAD_LOCK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_numpad, false, 0); + #endif + persistant_default_layer_set(1UL<<_NUMPAD); + } + return false; + break; + case NAVIGATION_LOCK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_navigation, false, 0); + #endif + persistant_default_layer_set(1UL<<_NAVIGATION); + } + return false; + break; + case EXCEL_LOCK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_excel, false, 0); + #endif + persistant_default_layer_set(1UL<<_EXCEL); + } + return false; + break; + case PARENS: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_9); + unregister_code(KC_9); + register_code(KC_0); + unregister_code(KC_0); + register_code(KC_RSFT); + register_code(KC_LEFT); + unregister_code(KC_LEFT); + } + return false; + break; + case BRACKETS: + if (record->event.pressed) { + register_code(KC_LBRC); + unregister_code(KC_LBRC); + register_code(KC_RBRC); + unregister_code(KC_RBRC); + register_code(KC_LEFT); + unregister_code(KC_LEFT); + } + return false; + break; + case BRACES: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_LBRC); + unregister_code(KC_LBRC); + register_code(KC_RBRC); + unregister_code(KC_RBRC); + unregister_code(KC_RSFT); + register_code(KC_LEFT); + unregister_code(KC_LEFT); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} diff --git a/keyboards/roadkit/keymaps/mjt/readme.md b/keyboards/roadkit/keymaps/mjt/readme.md new file mode 100644 index 000000000..80c0e5240 --- /dev/null +++ b/keyboards/roadkit/keymaps/mjt/readme.md @@ -0,0 +1,22 @@ +# Mike's custom keymap for roadkit + +Based on the 13 key layout. + +## LAYERS + +* Numpad - The layer that matches the caps +* Excel - / * - = and () [] {} macros +* Navigation - arrow keys and home/end +* ADJUST - just like planck adjust, lets you set default layer. +* DYN - dynamic macro layer for recording and playing macros + +## MACROS + +Sadly, the dynamic macros are probably going worthless because they keys that +they record have to be pressed on this keyboard. This keyboard doesn't have +most letters... + +## LEADER KEYS + +This board would probably be better with the user of leader keys instead of +complex layers with a raise/lower setup... Something to look into for later. diff --git a/keyboards/tv44/keymaps/mjt/Makefile b/keyboards/tv44/keymaps/mjt/Makefile new file mode 100644 index 000000000..41afd9a55 --- /dev/null +++ b/keyboards/tv44/keymaps/mjt/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/tv44/keymaps/mjt/config.h b/keyboards/tv44/keymaps/mjt/config.h new file mode 100644 index 000000000..e89a3ea12 --- /dev/null +++ b/keyboards/tv44/keymaps/mjt/config.h @@ -0,0 +1,14 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B2 + #define BACKLIGHT_LEVELS 7 +#endif + +#define USB_MAX_POWER_CONSUMPTION 50 + +#endif diff --git a/keyboards/tv44/keymaps/mjt/keymap.c b/keyboards/tv44/keymaps/mjt/keymap.c new file mode 100644 index 000000000..25f8cfc52 --- /dev/null +++ b/keyboards/tv44/keymaps/mjt/keymap.c @@ -0,0 +1,199 @@ +//Author: mike terhar + +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +enum minivan_layers { + _QWERTY, + _NUMSYM, + _FKEYS, + _FKEYGRV, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + DYNKEY, + DYNAMIC_MACRO_RANGE, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define FKEYS F(_FKEYS) +#define NUMSYM F(_NUMSYM) +#define FKEYGRV F(_FKEYGRV) +#define MACSLEEP M(5) +#define PLOVER M(6) +#define LAYERRESET M(7) +#define BACKLIT M(8) +#define ADJUST M(9) +#define XXXXXXX KC_NO + +#include "dynamic_macro.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QWERTY] = { + {FKEYS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT}, + {KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,SFT_T(KC_ENT) }, + {KC_LCTL,KC_LALT,KC_LGUI, KC_SPC,XXXXXXX,XXXXXXX,XXXXXXX,NUMSYM,KC_LEFT,KC_DOWN,KC_UP ,KC_RIGHT} +}, +[_NUMSYM] = { + {FKEYGRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_DEL,KC_EXLM, KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN, ADJUST }, + { _______, KC_UNDS,KC_PLUS, KC_LCBR,KC_RCBR,KC_PIPE , KC_MINS,KC_EQL,KC_LBRC, KC_RBRC, KC_BSLS, _______}, + {_______,_______,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,_______, KC_HOME, KC_PGDN, KC_PGUP, KC_END} +}, +[_FKEYS] ={ + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______}, + {KC_DEL, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, _______, _______, _______, MACSLEEP, DYN_REC_START1, DYN_REC_START2 }, + {KC_CAPS, _______, _______, _______, _______, _______, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2,_______,DYN_REC_STOP}, + {_______,_______,_______,LAYERRESET,XXXXXXX,XXXXXXX,XXXXXXX,LAYERRESET, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {LAYERRESET, XXXXXXX, KC_C, KC_V, XXXXXXX , XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, +[_ADJUST] = { + {_______ , RESET, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PAUS, KC_PSCR, KC_DEL }, + {_______ , _______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, _______, MACSLEEP, PLOVER, _______}, + {_______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {BACKLIT, _______, _______, LAYERRESET, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______} +} +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dyn_macro_rec[][2] = SONG(DVORAK_SOUND); +float tone_dyn_macro_play[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_adjust[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const uint16_t PROGMEM fn_actions[] = { + [_FKEYS] = ACTION_LAYER_TAP_KEY(_FKEYS, KC_TAB), + [_FKEYGRV] = ACTION_LAYER_TAP_KEY(_FKEYS, KC_GRV), + [_NUMSYM] = ACTION_LAYER_TAP_TOGGLE(_NUMSYM), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 5: // MACSLEEP + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + break; + case 6: // PLOVER + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_NUMSYM); + layer_off(_FKEYS); + layer_off(_ADJUST); + layer_on(_PLOVER); + } + break; + case 7: // LAYERRESET + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + layer_off(_NUMSYM); + layer_off(_FKEYS); + layer_off(_PLOVER); + layer_off(_ADJUST); + } + break; + case 8: // BACKLIT + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + case 9: // ADJUST + if(record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_adjust, false, 0); + #endif + layer_off(_NUMSYM); + layer_off(_FKEYS); + layer_off(_PLOVER); + layer_on(_ADJUST); + } + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint16_t macro_kc = keycode; + if (keycode == FKEYS || keycode == ADJUST || keycode == FKEYGRV ){ + macro_kc = DYN_REC_STOP; + } + if (!process_record_dynamic_macro(macro_kc, record)) { + return false; + } + + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} +#endif diff --git a/keyboards/tv44/keymaps/mjt/readme.md b/keyboards/tv44/keymaps/mjt/readme.md new file mode 100644 index 000000000..c86985f6c --- /dev/null +++ b/keyboards/tv44/keymaps/mjt/readme.md @@ -0,0 +1,26 @@ +# Mike's Minivan + +- Arrow Layout (45key) +- Dynamic Macros +- Media Keys +- Works with iPhone Camera Adapter + +## Layers + +Qwerty for letters and mods. + +Numsym for all numbers and symbols used in typing. Follows a similar approach to +planck but puts both on the same layer eschewing the F-keys. + +Fkeys layer is for the seldom used stuff like F-keys and some additional features +such as dynamic macros, media keys, and a sleep shortcut for OS X. + +Adjust layer is tough to get to so it is only for keyboard configuration stuff. + +## Dynamic Macros + +Hold TAB key, then press ";" to record macro 1 and "'" to record macro 2. + +When you are done recording, press TAB again. + +For playback of macros, TAB+"," plays macro 1 and TAB+","plays macro 2. -- cgit v1.2.3