From 0f0c2da983a031334b09891adac0ad33ca840838 Mon Sep 17 00:00:00 2001
From: Paul Ewing <pcewing00@gmail.com>
Date: Tue, 3 Apr 2018 22:47:02 -0700
Subject: Add the Speedo keyboard

---
 keyboards/speedo/readme.md | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 keyboards/speedo/readme.md

(limited to 'keyboards/speedo/readme.md')

diff --git a/keyboards/speedo/readme.md b/keyboards/speedo/readme.md
new file mode 100644
index 000000000..0e281b038
--- /dev/null
+++ b/keyboards/speedo/readme.md
@@ -0,0 +1,23 @@
+# Speedo
+
+![Speedo](https://raw.githubusercontent.com/pcewing/speedo/master/build_log/images/04-03_23-09-56_00.jpg)
+
+#### Keyboard Maintainer
+[Paul Ewing](https://github.com/pcewing)
+
+#### Hardware Supported
+Teensy 2.0
+
+#### Hardware Availability
+You will have to get the plates cut by an online service such as Ponoko. Case files are available in the [Speedo Repository](https://github.com/pcewing/speedo)
+
+## Building the Firmware:
+```
+make speedo:default
+```
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Flashing the Firmware
+See the QMK docs for handwiring a keyboard; there is a section with instructions on how to flash the *.hex* file to the Teensy 2.0 controller.
+
-- 
cgit v1.2.3