From 9cb1d36974b7ea4c380c0b7818812f6f5aae56c1 Mon Sep 17 00:00:00 2001 From: TurboMech Date: Wed, 3 Jan 2018 05:48:09 -0500 Subject: Added Mechmini 2.0 to Mechmini keyboard folder This creates a v1 and v2 subproject. V1 retains all the same implementations of the bootmapper-ported Mechmnini 1 including #2196. V2 adds the Mechmini 2.0 kayboard support (I know it took me way to long to get it a pull request in). All readme's updated to reflect compiling the two seperate keyboards. Simply either `make mechmini/v1:default` or `make mechmini/v2:defualt`. Utilizing the rules.mk using `make mechmini:default` will automatically create the Mechmini 2 default keymap as this is the current version and has a much wider user base. --- keyboards/mechmini/v2/rules.mk | 63 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100755 keyboards/mechmini/v2/rules.mk (limited to 'keyboards/mechmini/v2/rules.mk') diff --git a/keyboards/mechmini/v2/rules.mk b/keyboards/mechmini/v2/rules.mk new file mode 100755 index 000000000..f9ef6414b --- /dev/null +++ b/keyboards/mechmini/v2/rules.mk @@ -0,0 +1,63 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes -- cgit v1.2.3