From 6b1009b7a876db1f0cc5674cfa64739139ea4098 Mon Sep 17 00:00:00 2001 From: Nikolaus Wittenstein Date: Tue, 22 Jan 2019 18:17:41 -0500 Subject: [Keyboard] Add DataHand keyboard support (#4847) --- keyboards/handwired/datahand/datahand.h | 133 ++++++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 keyboards/handwired/datahand/datahand.h (limited to 'keyboards/handwired/datahand/datahand.h') diff --git a/keyboards/handwired/datahand/datahand.h b/keyboards/handwired/datahand/datahand.h new file mode 100644 index 000000000..cb9a4d3e3 --- /dev/null +++ b/keyboards/handwired/datahand/datahand.h @@ -0,0 +1,133 @@ +/* Copyright 2017-2019 Nikolaus Wittenstein + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * The first section contains all of the arguements; the second converts the arguments into a two-dimensional array. + */ + +/* Each code is three letters + * l or r - left or right hand + * p, r, m, i, t - pinky, ring finger, middle finger, index finger, thumb + * fingers: n, s, e, w, c - north, south, east, west, and center (manual calls this "well" but we already have "west") + * thumb: p, n, c, l, u, k - pad, nail, center, lock (harder center), up, knuckle + */ +#define LAYOUT( \ + lpn, lrn, lmn, lin, rin, rmn, rrn, rpn, \ +lpw, lpc, lpe, lrw, lrc, lre, lmw, lmc, lme, liw, lic, lie, riw, ric, rie, rmw, rmc, rme, rrw, rrc, rre, rpw, rpc, rpe, \ + lps, lrs, lms, lis, ris, rms, rrs, rps, \ + ltp, ltn, rtn, rtp, \ + ltc, rtc, \ + ltl, rtl, \ + ltu, ltk, rtk, rtu) \ +{ \ + {riw, rin, lpw, lpn},\ + {ric, rie, lpc, lpe},\ + {ris, rms, lps, lrs},\ + {rmw, rmn, lrw, lrn},\ + {rmc, rme, lrc, lre},\ + {rrw, rrn, lmw, lmn},\ + {rrc, rre, lmc, lme},\ + {rrs, rps, lms, lis},\ + {rpw, rpn, liw, lin},\ + {rpc, rpe, lic, lie},\ + {rtk, rtn, ltk, ltn},\ + {rtc, rtl, ltc, ltl},\ + {rtp, rtu, ltp, ltu},\ +} + +/* Mode LEDs are active-low on Port B on the Teensy. */ +#define LED_MODE_PORT PORTB +#define LED_TENKEY (1<<3) +#define LED_FN (1<<4) +#define LED_NORMAL (1<<5) +#define LED_NAS (1<<6) + +/* Lock LEDs are active-low on Port F on the Teensy. */ +#define LED_LOCK_PORT PORTF +#define LED_CAPS_LOCK (1<<4) +#define LED_MOUSE_LOCK (1<<5) +#define LED_NUM_LOCK (1<<6) +#define LED_SCROLL_LOCK (1<<7) + + +/* Appendix: + * Table based on https://geekhack.org/index.php?topic=12212.msg2059319#msg2059319 + * Some pin assignments (e.g. for PS/2 I/O) have been fixed. + * + * Teensy Datahand 8051 pin pin 8051 Datahand Teensy + * ------ -------- ---- --- --- ---- -------- ------ + * GND Mtrx send A P1.0 1 40 VCC VCC VCC + * PB7 Mtrx send B P1.1 2 39 P0.0 LED RH NAS PB6 + * PD0 Mtrx send C P1.2 3 38 P0.1 LED RH NORM PB5 + * PD1 Mtrx send D P1.3 4 37 P0.2 LED RH FCTN PB4 + * PD2 RH rcv 0 P1.4 5 36 P0.3 LED RH 10K PB3 + * PD3 RH rcv 1 P1.5 6 35 P0.4 LED RH unused PB2 + * PD4 LH rcv 0 P1.6 7 34 P0.5 LED RH unused PE1 + * PD5 LH rcv 1 P1.7 8 33 P0.6 LED RH unused PE0 + * PD6 Reset button RST 9 32 P0.7 ? PE7 + * PD7 ? P3.0 10 31 VPP - PE6 + * PE0 ? P3.1 11 30 ALE - GND + * PE1 kbd data P3.2 12 29 PSEN - AREF + * PC0 ? P3.3 13 28 P2.7 ? PF0 + * PC1 kbd clk P3.4 14 27 P2.6 ? PF1 + * PC2 ? P3.5 15 26 P2.5 ? PF2 + * PC3 RAM P3.6 16 25 P2.4 ? PF3 + * PC4 RAM P3.7 17 24 P2.3 LED D15 LH (CAPLK) PF4 + * PC5 XTAL2 XTAL2 18 23 P2.2 LED D13 LH (MSELK) PF5 + * PC6 XTAL1 XTAL1 19 22 P2.1 LED D6 LH (NUMLK) PF6 + * PC7 GND GND 20 21 P2.0 LED D14 LH (SCRLK) PF7 + * + * JP3 Pinout + * 2 - keyboard data + * 3 - keyboard clock + * + * In order to get the Teensy to work, we need to move pin 1 to a different pin. This is + * because on the Teensy pin 1 is ground, but we need to write to pin 1 in order to read + * the keyboard matrix. An ideal pin to move it to is VPP (pin 31), because this pin tells + * the 8051 whether it should read from external or internal memory. The Teensy doesn't + * care about that. + * + * The easiest way to reassign the pin is to use standoffs. You can check out this thread: + * https://geekhack.org/index.php?topic=12212.msg235382#msg235382 for a picture of what + * this looks like. Note that in the picture the pin has been reassigned to pin 12. We + * don't want to do that because we're going to use that pin to send data over PS/2. + * + * We could if we wanted also reassign the PS/2 pins to Teensy hardware UART pins, but + * that's more work. Instead we'll just bit-bang PS/2 because it's an old, slow protocol + * (and because there's already a bit-banged PS/2 host implementation in QMK - we just + * need to add the device side). + * + * So overall, we want the following inputs and outputs: + * Outputs: + * Matrix: + * PB7 + * PD0 + * PD1 + * PE6 (moved from pin1, GND) + * LEDs: + * PB3-6 + * PF4-7 + * Inputs: + * Matrix: + * PD2-5 + * I/Os (start up as inputs): + * PS/2: + * PC1 + * PE1 + */ -- cgit v1.2.3