From 3a0f11eb277ab719b312547981a0b0db958fbc87 Mon Sep 17 00:00:00 2001
From: Ryan <fauxpark@gmail.com>
Date: Thu, 19 Mar 2020 12:33:17 +1100
Subject: Set MCU for some F103 boards (#8459)

---
 keyboards/handwired/bluepill/bluepill70/rules.mk | 54 +++---------------------
 1 file changed, 6 insertions(+), 48 deletions(-)

(limited to 'keyboards/handwired/bluepill')

diff --git a/keyboards/handwired/bluepill/bluepill70/rules.mk b/keyboards/handwired/bluepill/bluepill70/rules.mk
index 5cf5f3f6c..4a757bcc9 100644
--- a/keyboards/handwired/bluepill/bluepill70/rules.mk
+++ b/keyboards/handwired/bluepill/bluepill70/rules.mk
@@ -1,51 +1,9 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-#MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-#BOARD = GENERIC_STM32_F103
-
-# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) //  Modified by Xydane
-OPT_DEFS =
-MCU_LDSCRIPT = STM32F103x8
-BOARD = GENERIC_STM32_F103
-
-# MAPLE MINI
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
-# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
-# BOARD = MAPLEMINI_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
+# MCU name
+MCU = STM32F103
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
+
+# project specific files
+SRC = matrix.c \
+      led.c
-- 
cgit v1.2.3