From 6a8c0a6468f4e4ce48a59152418a226d0f027497 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 24 Nov 2019 04:42:20 +0000 Subject: [Keyboard] Update ATmega32A readme files to match template (#7462) * Update atmega32a readme files to match template * Update atmega32a readme files to match template - fixes * Apply suggestions from code review --- keyboards/ft/mars80/readme.md | 35 +++++------------------------------ 1 file changed, 5 insertions(+), 30 deletions(-) (limited to 'keyboards/ft/mars80/readme.md') diff --git a/keyboards/ft/mars80/readme.md b/keyboards/ft/mars80/readme.md index 962275133..3d108300b 100644 --- a/keyboards/ft/mars80/readme.md +++ b/keyboards/ft/mars80/readme.md @@ -2,43 +2,18 @@ TKL Keyboard with in switch backlight and RGB Underglow. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: Mars 8.0 PCB -Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=93723.0) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: Mars 8.0 PCB +* Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=93723.0) Make example for this keyboard (after setting up your build environment): make ft/mars80:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make ft/mars80:default:flash **Reset Key:** Hold down the key located at `K00`, commonly programmed as `Pause/Break` while plugging in the keyboard. -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3