From f698f1e3f4f51431473d54512fd6c0609b9b72ee Mon Sep 17 00:00:00 2001
From: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
Date: Thu, 4 Apr 2019 14:25:35 -0700
Subject: [Keyboard] Add Budget96 by Donut Cables (#5550)

* initial commit of budget96

* non logic changes

* add my name to readme

* update matrix.c

* make the matrix representation of the layout macro

* fix up LAYOUT macro

* add missing character

* initial keymap commit

* put KC_NO where they belong

* basic keymap

* fix matrix row and col definition

* The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues

* update the readme

* change up manufacturer for budget96

* update copyright date

* fix up the switch matrix and provide a keymap

* forgot the keymap

* other matrix fixes

* missing a few keys in the switch matrix

* messed up the row tracing

* tweak keymap a bit

* use a lower case k

* fix spacing for markdown rendering

* put in the reset key documentation

* clean up the file a little

* use LAYOUT_96_ansi

* add a second layer for lighting controls

* add in lighting support

* add QMK Configurator support

* use pragma once

* remove un needed matrix.c

* convert to GPIO methods

* turn on rgblight_enable and get rid of custom matrix

* set bootloadhid_bootloader to 1

* set bootmagic to lite and set it to k50

* add reset information to readme

* use i2c_master instead of custom i2c

* restore the custom i2c code

* introduce reset key and eep_rst in function layer 1

* fix up pip3 install commands

* fix up device and manufacturer names

* remove un needed comments

* add an ALL layout macro along with QMK Configurator support

* move budget96 into donutcables directory since he actually has different boards

* add a short donut cables blurb taken from his website

* update readme for make instructions to point to the new path

* Update keyboards/donutcables/budget96/config.h

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* Update keyboards/donutcables/budget96/readme.md

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* Update keyboards/donutcables/budget96/info.json

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* turn on backlight

* Update keyboards/donutcables/budget96/readme.md

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* remove extra UART and BOOTLOADER settings that are not needed
---
 keyboards/donutcables/readme.md | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 keyboards/donutcables/readme.md

(limited to 'keyboards/donutcables/readme.md')

diff --git a/keyboards/donutcables/readme.md b/keyboards/donutcables/readme.md
new file mode 100644
index 000000000..d68b6a743
--- /dev/null
+++ b/keyboards/donutcables/readme.md
@@ -0,0 +1,12 @@
+# Donut Cables
+
+Donut Cables LLC is located in North Carolina, USA. 
+
+Website: https://donutcables.com/  
+
+**Contact Donut Cables at the following:**   
+
+Email: contact@donutcables.com  
+Reddit: /u/donutcat_cables  
+Geekhack/DeskThority: donutcat  
+Discord: @donutcat on the #mechkeys Discord  
\ No newline at end of file
-- 
cgit v1.2.3