From b36e532b5e0eef219f33075e6e60b68d104484ee Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 4 Jun 2016 00:10:47 -0400 Subject: cleans up folder structure * consolidates docs * deletes converter/ * updates .md references (most) --- doc/CYGWIN_GUIDE.md | 352 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 352 insertions(+) create mode 100755 doc/CYGWIN_GUIDE.md (limited to 'doc/CYGWIN_GUIDE.md') diff --git a/doc/CYGWIN_GUIDE.md b/doc/CYGWIN_GUIDE.md new file mode 100755 index 000000000..ac13e745d --- /dev/null +++ b/doc/CYGWIN_GUIDE.md @@ -0,0 +1,352 @@ +#Planck Advanced (but not too advanced) `cygwin` Users Guide +If you are a user of the [cygwin environment](https://cygwin.com) in Windows and want the freedom to use the latest tools available, then this is the guide for you. If compiling your own copy of the latest and greatest Gnu C Compiler makes you super happy, then this is the guide for you. If the command line make you smile, then this is the guide for you. + +This guide was written step by step as I went through the process on a `Windows 10` `x86_64` and a `Windows 7` `amd k10` based system. This should be generally applicable to to any `Windows` environment with `cygwin`. + +#####Do not skip steps. Do not move past a step until the previous step finishes successfully. + +Based on [avr-libc installation guide](http://www.nongnu.org/avr-libc/user-manual/install_tools.html) + +##Get the Required Packages +Download the `cygwin` setup ([x86_64](https://cygwin.com/setup-x86_64.exe)) and install the default system plus the following if they are not already selected: +- devel/git +- devel/gcc-core +- devel/gcc-g++ +- devel/flex +- devel/bison +- devel/make +- devel/texinfo +- devel/gettext-devel +- devel/automake +- devel/autoconfig +- devel/libtool +- text/gettext +- libs/libgcc1 +- interpreters/m4 +- web/wget +- archive/unzip + +The following sources will be required: +- [gmp](https://gmplib.org/) (6.1.0) +- [mpfr](http://www.mpfr.org/) (3.1.4) +- [mpc](http://www.multiprecision.org/) (1.0.3) +- [binutils](https://www.sourceware.org/binutils/) (2.26) +- [gcc](https://gcc.gnu.org/) (5.3.0) +- [avr-libc](http://www.nongnu.org/avr-libc/) (2.0.0) + +The `dfu-programmer` will be required to flash the new firmware +- [dfu-programmer](https://dfu-programmer.github.io/) (0.7.2) + +The set of commands below will create a directory (`~/local/avr`) for the sources you compile to be installed on the machine and a directory (`~/src`) for these source files to be stored. The commands then download the sources of the needed packages and unpack them. Note: the expand commands are different depending on if the packages are offered as a `bz2` or `gz` archive +``` +$ mkdir ~/local +$ mkdir ~/local/avr +$ mkdir ~/src +$ cd ~/src +$ wget https://gmplib.org/download/gmp/gmp-6.1.0.tar.bz2 +$ wget http://www.mpfr.org/mpfr-3.1.4/mpfr-3.1.4.tar.bz2 +$ wget ftp://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz +$ wget http://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.gz +$ wget http://mirror0.babylon.network/gcc/releases/gcc-5.3.0/gcc-5.3.0.tar.gz +$ wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-2.0.0.tar.bz2 +$ tar -xjf gmp-6.1.0.tar.bz2 +$ tar -xjf mpfr-3.1.4.tar.bz2 +$ tar -zxf mpc-1.0.3.tar.gz +$ tar -zxf binutils-2.26.tar.gz +$ tar -zxf gcc-5.3.0.tar.gz +$ tar -xjf avr-libc-2.0.0.tar.bz2 +``` + +##Setup the Build Environment +These commands will set up the install directory and the `PATH` variable, which will allow you to access your installed packages. Note: if you close the `cygwin` terminal window, you will need to rerun these commands, they are not permanent. +``` +$ PREFIX=$HOME/local/avr +$ export PREFIX +$ PATH=/usr/local/bin:/usr/local/lib:/usr/local/include:/bin:/lib:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS +$ PATH=$PATH:$PREFIX/bin:$PREFIX/lib +$ export PATH +``` + +##The `gcc` Required Math Library Packages +The following packages are required to be complied and installed in order to compile `gcc`. They are not sufficiently available through the `cygwin` package system, so we have to make them ourselves. They must be complied in this order because each one depends on the previous. Verfiy that for each package, `make check` returns all passing and no fails. + +###Build and Install `gmp` +``` +$ cd ~/src/gmp-6.1.0 +$ ./configure --enable-static --disable-shared +$ make +$ make check +$ make install +``` + +###Build and Install `mpfr` +``` +$ cd ~/src/mpfr-3.1.4 +$ ./configure --with-gmp-build=../gmp-6.1.0 --enable-static --disable-shared +$ make +$ make check +$ make install +``` + +###Build and Install `mpc` +``` +$ cd ~/src/mpc-1.0.3 +$ ./configure --with-gmp=/usr/local --with-mpfr=/usr/local --enable-static --disable-shared +$ make +$ make check +$ make install +``` + +##OPTIONAL Part +You can build and install a brand new `gcc` or you can use the one supplied by `cygwin`. This will take about 4-5 hours to compile (It is a "native build", so it does the entire build **3 times**. This takes a long while). + +###Build and Install `gcc` for Your Machine +``` +$ cd ~/src/gcc-5.3.0 +$ mkdir obj-local +$ cd obj-local +$ ../configure --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared +$ make +$ make install +``` +##End OPTIONAL Part + +###Build and Install `binutils` for Your Machine +``` +$ cd ~/src/binutils-2.26 +$ mkdir obj-local +$ cd obj-local +$ ../configure +$ make +$ make install +``` + +##Buliding `binutils`, `gcc`, and `avr-libc` for the AVR system +Now we can make the critical stuff for compiling our firmware: `binutils`, `gcc`, and `avr-libc` for the AVR architecture. These allow us to build and manipulate the firmware for the keyboard. + +###Build `binutils` for AVR +If you plan to build and install `avr-gdb` also, use the `gdb` install at the end of this guide as it also builds the `binutils` +``` +$ cd ~/src/binutils-2.26 +$ mkdir obj-avr +$ cd obj-avr +$ ../configure --prefix=$PREFIX --target=avr --disable-nls +$ make +$ make install +``` + +###Build `gcc` for AVR +``` +$ cd ~/src/gcc-5.3.0 +$ mkdir obj-avr +$ cd obj-avr +$ ../configure --prefix=$PREFIX --target=avr --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared --disable-nls --disable-libssp --with-dwarf2 +$ make +$ make install +``` + +###Build `avr-libc` for AVR +For building the `avr-libc`, we have to specify the host build system. In my case it is `x86_64-unknown-cygwin`. You can look for build system type in the `gcc` configure notes for the proper `--build` specification to pass when you configure `avr-libc`. +``` +$ cd ~/src/avr-libc-2.0.0 +$ ./configure --prefix=$PREFIX --build=x86_64-unknown-cygwin --host=avr +$ make +$ make install +``` + +##Building 'dfu-programmer' for flashing the firmware via USB and installing the drivers +We can either build our own, or use the precomplied binaries. The precompiled binaries don't play well with `cygwin` so it is better to build them ourselves. The procedure for the precompiled binaries is included at the end of this guide. + +### Build and Install the `libusb` +The `dfu-programmer` requires `libusb` so that it can interact with the USB system. These repos must be bootstrapped in order to create an appropriate `./configure` and `Makefile` for your system. +``` +$ cd ~/src +$ git clone https://github.com/libusb/libusb.git +$ cd libusb +$ ./bootstrap.sh +$ ./configure +$ make +$ make install +``` + +### Build and Install the `dfu-programmer` +``` +$ cd ~/src +$ git clone https://github.com/dfu-programmer/dfu-programmer.git +$ cd dfu-programmer +$ ./bootstrap.sh +$ ./configure +$ make +$ make install +``` + +Verify the installation with: +``` +$ which dfu-programmer +/usr/local/bin/dfu-programmer + +$ dfu-programmer +dfu-programmer 0.7.2 +https://github.com/dfu-programmer/dfu-programmer +Type 'dfu-programmer --help' for a list of commands + 'dfu-programmer --targets' to list supported target devices +``` +If you are not getting the above result, you will not be able to flash the firmware! + +###Install the USB drivers +The drivers are included in the windows binary version of [`dfu-programmer` 0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip). +``` +$ cd ~/src +$ wget http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip +$ unzip dfu-programmer-win-0.7.2.zip -d dfu-programmer-win-0.7.2 +``` + +or + +The official drivers are found in [Atmel's `FLIP` installer](http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe). Download and then install `FLIP`. Upon installation, the drivers will be found in `C:\Program Files (x86)\Atmel\Flip 3.4.7\usb`. + +Then, from an **administrator-privileged** `Windows` terminal, run the following command (adjust the path for username, etc. as necessary) and accept the prompt that pops up: +``` +C:\> pnputil -i -a C:\cygwin64\home\Kevin\src\dfu-programmer-win-0.7.2\dfu-prog-usb-1.2.2\atmel_usb_dfu.inf +or +C:\> pnputil -i -a "C:\Program Files (x86)\Atmel\Flip 3.4.7\usb\atmel_usb_dfu.inf" +``` + +This should be the result: +``` +Microsoft PnP Utility + +Processing inf : atmel_usb_dfu.inf +Successfully installed the driver on a device on the system. +Driver package added successfully. +Published name : oem104.inf + + +Total attempted: 1 +Number successfully imported: 1 +``` + +Alternatively, the `Windows` driver can be installed when prompted by `Windows` when the keyboard is attached. Do not let `Windows` search for a driver; specify the path to search for a driver and point it to the `atmel_usb_dfu.inf` file. + +##Building and Flashing the Planck firmware! +If you did everything else right. This part should be a snap! Grab the latest sources from `github`, make the Plank firmware, then flash it. + +###Build Planck and Load the Firmware +``` +$ cd ~/src +$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ cd qmk_firmware/keyboard/planck +$ make +``` + +Make sure there are no errors. You should end up with this or something similar: +``` +Creating load file for Flash: planck.hex +avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature planck.elf planck.hex + +Creating load file for EEPROM: planck.eep +avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \ +--change-section-lma .eeprom=0 --no-change-warnings -O ihex planck.elf planck.eep || exit 0 + +Creating Extended Listing: planck.lss +avr-objdump -h -S -z planck.elf > planck.lss + +Creating Symbol Table: planck.sym +avr-nm -n planck.elf > planck.sym + +Size after: + text data bss dec hex filename + 18602 82 155 18839 4997 planck.elf + +-------- end -------- +``` + +If you do not get the above, you **did not** build the firmware, and you will have nothing to flash. If you have the fresh clone from `github`, it was probably something gone wrong in this install process, go check and see what didn't work and threw errors or what steps you might have missed. + +But if everything went OK, you are ready to flash! Press the reset button on the bottom of the Planck, wait two seconds, then: +``` +$ make dfu +``` +. +. +. +profit!!! + + + + + +##extra bits... + +###Installing Precompiled `dfu-programmer` Binaries (not recommended for `cygwin`) +To install the `dfu-programmer` from the binaries, we must get if from [the `dfu-programmer` website](https://dfu-programmer.github.io/) ([0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip)). + +Copy this file into your `cygwin` home\src directory. (For me, it is `C:\cygwin64\home\Kevin\src`), extract the files, move `dfu-programmer.exe` to `~/local/avr/bin`. Most obnoxiously, the `libusb0_x86.dll` and `libusb0.sys` need to be moved from `./dfu-prog-usb-1.2.2/x86/` to a directory in the `Windows` `PATH` and the `cygwin` `PATH`. This is because the `dfu-programmer` binary is `mingw` based, not `cygwin` based, so the `dlls` do not cooperate. I achieved acceptable pathing by moving the files to `C:\cygwin64\home\Kevin\local\avr\bin` Then, in a `WINDOWS` command prompt running (Adjusting your path for username, etc. as needed): +``` +C:\> set PATH=%PATH%;C:\cygwin64\home\Kevin\local\avr\bin +``` + +Then, rename `libusb0_x86.dll` to `libusb0.dll`. + +You can tell that you were successful by trying to execute 'dfu-programmer' from the 'cygwin' prompt: +``` +$ which dfu-programmer +/home/Kevin/local/avr/bin/dfu-programmer + +$ dfu-programmer +dfu-programmer 0.7.2 +https://github.com/dfu-programmer/dfu-programmer +Type 'dfu-programmer --help' for a list of commands + 'dfu-programmer --targets' to list supported target devices +``` + +If you are not getting the above result, you will not be able to flash the firmware! +- Try making sure your `PATH` variables are set correctly for both `Windows` and `cygwin`. +- Make sure the `dll` is named correctly. +- Do not extract it with `cygwin`'s `unzip` as it does not set the executable permission. If you did it anyway, do `chmod +x dfu-programmer.exe`. +- Still have problems? Try building it instead. + + +##Debugging Tools + +These tools are for debugging your firmware, etc. before flashing. Theoretically, it can save your memory from wearing out. However, these tool do not work 100% for the Planck firmware. + +### `gdb` for AVR +`gdb` has a simulator for AVR but it does not support all instructions (like WDT), so it immediately crashes when running the Planck firmware (because `lufa.c` disables the WDT in the first few lines of execution). But it can still be useful in debugging example code and test cases, if you know how to use it. + +``` +$ cd ~/src +$ git clone git://sourceware.org/git/binutils-gdb.git +$ cd binutils-gdb +$ mkdir obj-avr +$ cd obj-avr +$ ../configure --prefix=$PREFIX --target=avr --build=x86_64-unknown-cygwin --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --disable-nls --enable-static +$ make +$ make install +``` + +### `simulavr` +`simulavr` is an AVR simulator. It runs the complied AVR elfs. `simulavr` does not support the `atmega32u4` device... it does `atmega32` but that is not good enough for the firmware (no PORTE and other things), so you cannot run the Planck firmware. I use it to simulate ideas I have for features in separate test projects. + +This one is a major pain in the butt because it has a lot of dependencies and it is buggy. I will do my best to explain it but... it was hard to figure out. A few things need to be changed in the 'Makefile' to make it work in `cygwin`. + + +``` +$ cd ~/src +$ git clone https://github.com/Traumflug/simulavr.git +$ cd simulavr +$ ./bootstrap +$ ./configure --prefix=$PREFIX --enable-static --disable-tcl --disable-doxygen-doc +``` + Edit `src/Makefile.am` now so that `-no-undefined` is included (I did this by removing the SYS_MINGW conditional surrounding `libsim_la_LDFLAGS += -no-undefined` and `libsimulavr_la_LDFLAGS += -no-undefined \ libsimulavr_la_LIBADD += $(TCL_LIB)`. Also, `$(EXEEXT)` is added after `kbdgentables` in two places. + +``` +$ make +$ make install +``` + + +TODO: +- git repos for all sources +- command line magic for cygwin setup +- better options for `dfu-drivers` -- cgit v1.2.3