From f2c179de58c63b2202a490d283fd8fa216680ce7 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Wed, 21 Aug 2019 15:18:52 +1000 Subject: Remove superfluous JTAG disable code (#6445) * Remove superfluous JTAG disable code * 32A has differently named register * Accidentally some operators * 32A also has different JTAG pins * Wrap disable_jtag() in an ifndef * Document this new define * Rename the define, it conflicts with a LUFA thing Also, move the ifndef wrapping to the call in keyboard_setup() --- docs/faq_debug.md | 17 +++++------------ docs/zh-cn/faq_debug.md | 17 ----------------- keyboards/amj96/matrix.c | 3 --- keyboards/clueboard/17/17.c | 4 ---- keyboards/clueboard/66/rev2/rev2.c | 4 ---- keyboards/clueboard/66_hotswap/prototype/prototype.c | 4 ---- keyboards/ergodone/matrix.c | 4 ---- keyboards/handwired/promethium/matrix.c | 7 ------- keyboards/hhkb/rn42/rn42.c | 4 ---- keyboards/hid_liber/matrix.c | 4 ---- keyboards/hotdox/matrix.c | 4 ---- keyboards/launchpad/rev1/rev1.c | 7 +------ keyboards/lets_split/sockets/sockets.h | 1 - keyboards/miniaxe/config.h | 2 -- keyboards/sx60/matrix.c | 7 ------- keyboards/vitamins_included/matrix.c | 6 ------ keyboards/vitamins_included/rev1/rev1.h | 1 - tmk_core/common/keyboard.c | 11 +++++++++-- tmk_core/common/keyboard.h | 2 -- 19 files changed, 15 insertions(+), 94 deletions(-) diff --git a/docs/faq_debug.md b/docs/faq_debug.md index f6cc729b6..5cc20251d 100644 --- a/docs/faq_debug.md +++ b/docs/faq_debug.md @@ -184,22 +184,15 @@ Pressing any key during sleep should wake host. Arduino Leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem. +## Enabling JTAG -## Using PF4-7 Pins of USB AVR? -You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affected with this. +By default, the JTAG debugging interface is disabled as soon as the keyboard starts up. JTAG-capable MCUs come from the factory with the `JTAGEN` fuse set, and it takes over certain pins of the MCU that the board may be using for the switch matrix, LEDs, etc. -If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function. +If you would like to keep JTAG enabled, just add the following to your `config.h`: -See this code. +```c +#define NO_JTAG_DISABLE ``` - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1< -代码如下。 -``` - // F接口JTAG失能。在四个周期内写入两次JTD位。 - MCUCR |= (1<. //#define EE_HANDS #define I2C_MASTER_LEFT //#define I2C_MASTER_RIGHT - -#define DISABLE_JTAG diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c index e8e9d6574..58647d13b 100644 --- a/keyboards/sx60/matrix.c +++ b/keyboards/sx60/matrix.c @@ -113,13 +113,6 @@ uint8_t matrix_cols(void) { } void matrix_init(void) { - - /* To use PORTF disable JTAG with writing JTD bit twice within four cycles. */ - #if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega32U4__)) - MCUCR |= _BV(JTD); - MCUCR |= _BV(JTD); - #endif - mcp23018_status = true; /* initialize row and col */ diff --git a/keyboards/vitamins_included/matrix.c b/keyboards/vitamins_included/matrix.c index 1f5071c69..d44e70f08 100644 --- a/keyboards/vitamins_included/matrix.c +++ b/keyboards/vitamins_included/matrix.c @@ -136,12 +136,6 @@ bool has_usb(void) { void matrix_init(void) { -#ifdef DISABLE_JTAG - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1<