diff options
Diffstat (limited to 'lib/lufa/Projects/Webserver')
49 files changed, 17675 insertions, 0 deletions
diff --git a/lib/lufa/Projects/Webserver/Config/AppConfig.h b/lib/lufa/Projects/Webserver/Config/AppConfig.h new file mode 100644 index 000000000..30a265767 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Config/AppConfig.h @@ -0,0 +1,73 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define ENABLE_DHCP_CLIENT + #define ENABLE_DHCP_SERVER + #define ENABLE_TELNET_SERVER + #define MAX_URI_LENGTH 50 + + #define DEVICE_IP_ADDRESS (uint8_t[]){ 10, 0, 0, 2} + #define DEVICE_NETMASK (uint8_t[]){255, 255, 255, 0} + #define DEVICE_GATEWAY (uint8_t[]){ 10, 0, 0, 1} + #define SERVER_MAC_ADDRESS (uint8_t[]){ 1, 0, 1, 0, 1, 0} + + #define UIP_CONF_UDP (defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)) + #define UIP_CONF_BROADCAST 1 + #define UIP_CONF_TCP 1 + #define UIP_CONF_UDP_CONNS 1 + #define UIP_CONF_MAX_CONNECTIONS 3 + #define UIP_CONF_MAX_LISTENPORTS 5 + #define UIP_CONF_BUFFER_SIZE 1514 + #define UIP_CONF_LL_802154 0 + #define UIP_CONF_LL_80211 0 + #define UIP_CONF_ROUTER 0 + #define UIP_CONF_ICMP6 0 + #define UIP_CONF_ICMP_DEST_UNREACH 1 + #define UIP_URGDATA 0 + #define UIP_ARCH_CHKSUM 0 + #define UIP_ARCH_ADD32 0 + #define UIP_NEIGHBOR_CONF_ADDRTYPE 0 + +#endif diff --git a/lib/lufa/Projects/Webserver/Config/LUFAConfig.h b/lib/lufa/Projects/Webserver/Config/LUFAConfig.h new file mode 100644 index 000000000..ba602dbad --- /dev/null +++ b/lib/lufa/Projects/Webserver/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ + #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/lib/lufa/Projects/Webserver/Descriptors.c b/lib/lufa/Projects/Webserver/Descriptors.c new file mode 100644 index 000000000..72dda9f12 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Descriptors.c @@ -0,0 +1,295 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(1,1,0), + .Class = USB_CSCP_IADDeviceClass, + .SubClass = USB_CSCP_IADDeviceSubclass, + .Protocol = USB_CSCP_IADDeviceProtocol, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, + .ProductID = 0x2069, + .ReleaseNumber = VERSION_BCD(0,0,1), + + .ManufacturerStrIndex = STRING_ID_Manufacturer, + .ProductStrIndex = STRING_ID_Product, + .SerialNumStrIndex = USE_INTERNAL_SERIAL, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 3, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .CDC_IAD = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, + + .FirstInterfaceIndex = INTERFACE_ID_CDC_CCI, + .TotalInterfaces = 2, + + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_ACMSubclass, + .Protocol = CDC_CSCP_VendorSpecificProtocol, + + .IADStrIndex = NO_DESCRIPTOR + }, + + .CDC_CCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_CDC_CCI, + .AlternateSetting = 0, + + .TotalEndpoints = 1, + + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_ACMSubclass, + .Protocol = CDC_CSCP_VendorSpecificProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_Functional_Header = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_Header, + + .CDCSpecification = VERSION_BCD(1,1,0), + }, + + .CDC_Functional_ACM = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_ACM, + + .Capabilities = 0x00, + }, + + .CDC_Functional_Union = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_Union, + + .MasterInterfaceNumber = INTERFACE_ID_CDC_CCI, + .SlaveInterfaceNumber = INTERFACE_ID_CDC_DCI, + }, + + .CDC_NotificationEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_NOTIFICATION_EPADDR, + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_NOTIFICATION_EPSIZE, + .PollingIntervalMS = 0xFF + }, + + .CDC_DCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_CDC_DCI, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = CDC_CSCP_CDCDataClass, + .SubClass = CDC_CSCP_NoDataSubclass, + .Protocol = CDC_CSCP_NoDataProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .RNDIS_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_RX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .RNDIS_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_TX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .MS_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_MassStorage, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = MS_CSCP_MassStorageClass, + .SubClass = MS_CSCP_SCSITransparentSubclass, + .Protocol = MS_CSCP_BulkOnlyTransportProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .MS_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = MASS_STORAGE_IN_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = MASS_STORAGE_IO_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .MS_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = MASS_STORAGE_IO_EPSIZE, + .PollingIntervalMS = 0x05 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Webserver"); + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case STRING_ID_Language: + Address = &LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case STRING_ID_Manufacturer: + Address = &ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case STRING_ID_Product: + Address = &ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/lib/lufa/Projects/Webserver/Descriptors.h b/lib/lufa/Projects/Webserver/Descriptors.h new file mode 100644 index 000000000..66da1b654 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Descriptors.h @@ -0,0 +1,128 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include <avr/pgmspace.h> + + #include <LUFA/Drivers/USB/USB.h> + + #include "Config/AppConfig.h" + + /* Macros: */ + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) + + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) + + /** Size in bytes of the Mass Storage data endpoints. */ + #define MASS_STORAGE_IO_EPSIZE 64 + + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5) + + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) + + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) + + /** Size in bytes of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPSIZE 8 + + /** Size in bytes of the CDC data IN and OUT endpoints. */ + #define CDC_TXRX_EPSIZE 64 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // RNDIS CDC Command Interface + USB_Descriptor_Interface_Association_t CDC_IAD; + USB_Descriptor_Interface_t CDC_CCI_Interface; + USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header; + USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM; + USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union; + USB_Descriptor_Endpoint_t CDC_NotificationEndpoint; + + // RNDIS CDC Data Interface + USB_Descriptor_Interface_t CDC_DCI_Interface; + USB_Descriptor_Endpoint_t RNDIS_DataOutEndpoint; + USB_Descriptor_Endpoint_t RNDIS_DataInEndpoint; + + // Mass Storage Interface + USB_Descriptor_Interface_t MS_Interface; + USB_Descriptor_Endpoint_t MS_DataInEndpoint; + USB_Descriptor_Endpoint_t MS_DataOutEndpoint; + } USB_Descriptor_Configuration_t; + + /** Enum for the device interface descriptor IDs within the device. Each interface descriptor + * should have a unique ID index associated with it, which can be used to refer to the + * interface from other descriptors. + */ + enum InterfaceDescriptors_t + { + INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */ + INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */ + INTERFACE_ID_MassStorage = 2, /**< Mass storage interface descriptor ID */ + }; + + /** Enum for the device string descriptor IDs within the device. Each string descriptor should + * have a unique ID index associated with it, which can be used to refer to the string from + * other descriptors. + */ + enum StringDescriptors_t + { + STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ + STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ + STRING_ID_Product = 2, /**< Product string ID */ + }; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif + diff --git a/lib/lufa/Projects/Webserver/LUFA Webserver RNDIS.inf b/lib/lufa/Projects/Webserver/LUFA Webserver RNDIS.inf new file mode 100644 index 000000000..c77de8f6b --- /dev/null +++ b/lib/lufa/Projects/Webserver/LUFA Webserver RNDIS.inf @@ -0,0 +1,59 @@ +; Windows LUFA RNDIS Setup File +; Copyright (c) 2000 Microsoft Corporation + +[DefaultInstall] +CopyINF="LUFA Webserver RNDIS.inf" + +[Version] +Signature="$Windows NT$" +Class=Net +ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318} +Provider=%MFGNAME% +DriverVer=7/1/2012,10.0.0.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64 + +[ControlFlags] +ExcludeFromSelect=* + +[DriverInstall] +Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI +BusType=15 +include=netrndis.inf +needs=Usb_Rndis.ndi +AddReg=Rndis_AddReg_Vista + +[DriverInstall.Services] +include=netrndis.inf +needs=Usb_Rndis.ndi.Services + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069 + +[DeviceList.NTx86] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069 + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069 + +[DeviceList.NTia64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069 + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGNAME="http://www.lufa-lib.org" +DESCRIPTION="LUFA USB RNDIS Demo" diff --git a/lib/lufa/Projects/Webserver/Lib/DHCPClientApp.c b/lib/lufa/Projects/Webserver/Lib/DHCPClientApp.c new file mode 100644 index 000000000..760718127 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DHCPClientApp.c @@ -0,0 +1,208 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * DHCP Client Application. When connected to the uIP stack, this will retrieve IP configuration settings from the + * DHCP server on the network. + */ + +#define INCLUDE_FROM_DHCPCLIENTAPP_C +#include "DHCPClientApp.h" + +#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__) + +/** Initialization function for the DHCP client. */ +void DHCPClientApp_Init(void) +{ + /* Create a new UDP connection to the DHCP server port for the DHCP solicitation */ + struct uip_udp_conn* Connection = uip_udp_new(&uip_broadcast_addr, HTONS(DHCP_SERVER_PORT)); + + /* If the connection was successfully created, bind it to the local DHCP client port */ + if (Connection != NULL) + { + uip_udp_appstate_t* const AppState = &Connection->appstate; + uip_udp_bind(Connection, HTONS(DHCP_CLIENT_PORT)); + + /* Set the initial client state */ + AppState->DHCPClient.CurrentState = DHCP_STATE_SendDiscover; + + /* Set timeout period to half a second for a DHCP server to respond */ + timer_set(&AppState->DHCPClient.Timeout, CLOCK_SECOND / 2); + } +} + +/** uIP stack application callback for the DHCP client. This function must be called each time the TCP/IP stack + * needs a UDP packet to be processed. + */ +void DHCPClientApp_Callback(void) +{ + uip_udp_appstate_t* const AppState = &uip_udp_conn->appstate; + DHCP_Header_t* const AppData = (DHCP_Header_t*)uip_appdata; + uint16_t AppDataSize = 0; + + switch (AppState->DHCPClient.CurrentState) + { + case DHCP_STATE_SendDiscover: + /* Clear all DHCP settings, reset client IP address */ + memset(&AppState->DHCPClient.DHCPOffer_Data, 0x00, sizeof(AppState->DHCPClient.DHCPOffer_Data)); + uip_sethostaddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.AllocatedIP); + + /* Fill out the DHCP response header */ + AppDataSize += DHCPClientApp_FillDHCPHeader(AppData, DHCP_DISCOVER, AppState); + + /* Add the required DHCP options list to the packet */ + uint8_t RequiredOptionList[] = {DHCP_OPTION_SUBNET_MASK, DHCP_OPTION_ROUTER, DHCP_OPTION_DNS_SERVER}; + AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_REQ_LIST, sizeof(RequiredOptionList), + RequiredOptionList); + + /* Send the DHCP DISCOVER packet */ + uip_udp_send(AppDataSize); + + /* Reset the timeout timer, progress to next state */ + timer_reset(&AppState->DHCPClient.Timeout); + AppState->DHCPClient.CurrentState = DHCP_STATE_WaitForOffer; + + break; + case DHCP_STATE_WaitForOffer: + if (!(uip_newdata())) + { + /* Check if the DHCP timeout period has expired while waiting for a response */ + if (timer_expired(&AppState->DHCPClient.Timeout)) + AppState->DHCPClient.CurrentState = DHCP_STATE_SendDiscover; + + break; + } + + uint8_t OfferResponse_MessageType; + if ((AppData->TransactionID == DHCP_TRANSACTION_ID) && + DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_MSG_TYPE, &OfferResponse_MessageType) && + (OfferResponse_MessageType == DHCP_OFFER)) + { + /* Received a DHCP offer for an IP address, copy over values for later request */ + memcpy(&AppState->DHCPClient.DHCPOffer_Data.AllocatedIP, &AppData->YourIP, sizeof(uip_ipaddr_t)); + DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_SUBNET_MASK, &AppState->DHCPClient.DHCPOffer_Data.Netmask); + DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_ROUTER, &AppState->DHCPClient.DHCPOffer_Data.GatewayIP); + DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_SERVER_ID, &AppState->DHCPClient.DHCPOffer_Data.ServerIP); + + timer_reset(&AppState->DHCPClient.Timeout); + AppState->DHCPClient.CurrentState = DHCP_STATE_SendRequest; + } + + break; + case DHCP_STATE_SendRequest: + /* Fill out the DHCP response header */ + AppDataSize += DHCPClientApp_FillDHCPHeader(AppData, DHCP_REQUEST, AppState); + + /* Add the DHCP REQUESTED IP ADDRESS option to the packet */ + AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_REQ_IPADDR, sizeof(uip_ipaddr_t), + &AppState->DHCPClient.DHCPOffer_Data.AllocatedIP); + + /* Add the DHCP SERVER IP ADDRESS option to the packet */ + AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_SERVER_ID, sizeof(uip_ipaddr_t), + &AppState->DHCPClient.DHCPOffer_Data.ServerIP); + + /* Send the DHCP REQUEST packet */ + uip_udp_send(AppDataSize); + + /* Reset the timeout timer, progress to next state */ + timer_reset(&AppState->DHCPClient.Timeout); + AppState->DHCPClient.CurrentState = DHCP_STATE_WaitForACK; + + break; + case DHCP_STATE_WaitForACK: + if (!(uip_newdata())) + { + /* Check if the DHCP timeout period has expired while waiting for a response */ + if (timer_expired(&AppState->DHCPClient.Timeout)) + AppState->DHCPClient.CurrentState = DHCP_STATE_SendDiscover; + + break; + } + + uint8_t RequestResponse_MessageType; + if ((AppData->TransactionID == DHCP_TRANSACTION_ID) && + DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_MSG_TYPE, &RequestResponse_MessageType) && + (RequestResponse_MessageType == DHCP_ACK)) + { + /* Set the new network parameters from the DHCP server */ + uip_sethostaddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.AllocatedIP); + uip_setnetmask((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.Netmask); + uip_setdraddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.GatewayIP); + + AppState->DHCPClient.CurrentState = DHCP_STATE_AddressLeased; + } + + break; + } +} + +/** Fills the DHCP packet response with the appropriate BOOTP header for DHCP. This fills out all the required + * fields, leaving only the additional DHCP options to be added to the packet before it is sent to the DHCP server. + * + * \param[out] DHCPHeader Location in the packet buffer where the BOOTP header should be written to + * \param[in] DHCPMessageType DHCP Message type, such as DHCP_DISCOVER + * \param[in] AppState Application state of the current UDP connection + * + * \return Size in bytes of the created DHCP packet + */ +static uint16_t DHCPClientApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader, + const uint8_t DHCPMessageType, + uip_udp_appstate_t* const AppState) +{ + /* Erase existing packet data so that we start will all 0x00 DHCP header data */ + memset(DHCPHeader, 0, sizeof(DHCP_Header_t)); + + /* Fill out the DHCP packet header */ + DHCPHeader->Operation = DHCP_OP_BOOTREQUEST; + DHCPHeader->HardwareType = DHCP_HTYPE_ETHERNET; + DHCPHeader->HardwareAddressLength = sizeof(MACAddress); + DHCPHeader->Hops = 0; + DHCPHeader->TransactionID = DHCP_TRANSACTION_ID; + DHCPHeader->ElapsedSeconds = 0; + DHCPHeader->Flags = HTONS(BOOTP_BROADCAST); + memcpy(&DHCPHeader->ClientIP, &uip_hostaddr, sizeof(uip_ipaddr_t)); + memcpy(&DHCPHeader->YourIP, &AppState->DHCPClient.DHCPOffer_Data.AllocatedIP, sizeof(uip_ipaddr_t)); + memcpy(&DHCPHeader->NextServerIP, &AppState->DHCPClient.DHCPOffer_Data.ServerIP, sizeof(uip_ipaddr_t)); + memcpy(&DHCPHeader->ClientHardwareAddress, &MACAddress, sizeof(struct uip_eth_addr)); + DHCPHeader->Cookie = DHCP_MAGIC_COOKIE; + + /* Add a DHCP message type and terminator options to the start of the DHCP options field */ + DHCPHeader->Options[0] = DHCP_OPTION_MSG_TYPE; + DHCPHeader->Options[1] = 1; + DHCPHeader->Options[2] = DHCPMessageType; + DHCPHeader->Options[3] = DHCP_OPTION_END; + + /* Calculate the total number of bytes added to the outgoing packet */ + return (sizeof(DHCP_Header_t) + 4); +} + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/DHCPClientApp.h b/lib/lufa/Projects/Webserver/Lib/DHCPClientApp.h new file mode 100644 index 000000000..0aec00331 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DHCPClientApp.h @@ -0,0 +1,69 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for DHCPClientApp.c. + */ + +#ifndef _DHCPCLIENT_APP_H_ +#define _DHCPCLIENT_APP_H_ + + /* Includes: */ + #include <stdio.h> + + #include <uip.h> + + #include "Config/AppConfig.h" + #include "../Webserver.h" + #include "DHCPCommon.h" + + /* Enums: */ + /** States for each DHCP connection to a DHCP client. */ + enum DHCP_Client_States_t + { + DHCP_STATE_SendDiscover, /**< Send DISCOVER packet to retrieve DHCP lease offers */ + DHCP_STATE_WaitForOffer, /**< Waiting for OFFER packet giving available DHCP leases */ + DHCP_STATE_SendRequest, /**< Send REQUEST packet to request a DHCP lease */ + DHCP_STATE_WaitForACK, /**< Wait for ACK packet to complete the DHCP lease */ + DHCP_STATE_AddressLeased, /**< DHCP address has been leased from a DHCP server */ + }; + + /* Function Prototypes: */ + void DHCPClientApp_Init(void); + void DHCPClientApp_Callback(void); + + #if defined(INCLUDE_FROM_DHCPCLIENTAPP_C) + static uint16_t DHCPClientApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader, + const uint8_t DHCPMessageType, + uip_udp_appstate_t* const AppState); + #endif +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/DHCPCommon.c b/lib/lufa/Projects/Webserver/Lib/DHCPCommon.c new file mode 100644 index 000000000..6d80f65ca --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DHCPCommon.c @@ -0,0 +1,103 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Common DHCP routines to manage DHCP packet data. + */ + +#include "DHCPCommon.h" + +#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) + +/** Sets the given DHCP option in the DHCP packet's option list. This automatically moves the + * end of options terminator past the new option in the options list. + * + * \param[in,out] DHCPOptionList Pointer to the start of the DHCP packet's options list + * \param[in] Option DHCP option to add to the list + * \param[in] DataLen Size in bytes of the option data to add + * \param[in] OptionData Buffer where the option's data is to be sourced from + * + * \return Number of bytes added to the DHCP packet + */ +uint8_t DHCPCommon_SetOption(uint8_t* DHCPOptionList, + const uint8_t Option, + const uint8_t DataLen, + void* const OptionData) +{ + /* Skip through the DHCP options list until the terminator option is found */ + while (*DHCPOptionList != DHCP_OPTION_END) + DHCPOptionList += (DHCPOptionList[1] + 2); + + /* Overwrite the existing terminator with the new option, add a new terminator at the end of the list */ + DHCPOptionList[0] = Option; + DHCPOptionList[1] = DataLen; + memcpy(&DHCPOptionList[2], OptionData, DataLen); + DHCPOptionList[2 + DataLen] = DHCP_OPTION_END; + + /* Calculate the total number of bytes added to the outgoing packet */ + return (2 + DataLen); +} + +/** Retrieves the given option's data (if present) from the DHCP packet's options list. + * + * \param[in,out] DHCPOptionList Pointer to the start of the DHCP packet's options list + * \param[in] Option DHCP option to retrieve to the list + * \param[out] Destination Buffer where the option's data is to be written to if found + * + * \return Boolean \c true if the option was found in the DHCP packet's options list, \c false otherwise + */ +bool DHCPCommon_GetOption(const uint8_t* DHCPOptionList, + const uint8_t Option, + void* const Destination) +{ + /* Look through the incoming DHCP packet's options list for the requested option */ + while (*DHCPOptionList != DHCP_OPTION_END) + { + /* Check if the current DHCP option in the packet is the one requested */ + if (DHCPOptionList[0] == Option) + { + /* Copy request option's data to the destination buffer */ + memcpy(Destination, &DHCPOptionList[2], DHCPOptionList[1]); + + /* Indicate that the requested option data was successfully retrieved */ + return true; + } + + /* Skip to next DHCP option in the options list */ + DHCPOptionList += (DHCPOptionList[1] + 2); + } + + /* Requested option not found in the incoming packet's DHCP options list */ + return false; +} + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/DHCPCommon.h b/lib/lufa/Projects/Webserver/Lib/DHCPCommon.h new file mode 100644 index 000000000..8f54c1671 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DHCPCommon.h @@ -0,0 +1,159 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for common DHCP defines. + */ + +#ifndef _DHCP_COMMON_H_ +#define _DHCP_COMMON_H_ + + /* Includes: */ + #include <stdint.h> + #include <stdbool.h> + #include <string.h> + + #include "Config/AppConfig.h" + + #include <uip.h> + + /* Macros: */ + /** UDP listen port for a BOOTP server. */ + #define DHCP_SERVER_PORT 67 + + /** UDP listen port for a BOOTP client. */ + #define DHCP_CLIENT_PORT 68 + + /** BOOTP message type for a BOOTP REQUEST message. */ + #define DHCP_OP_BOOTREQUEST 0x01 + + /** BOOTP message type for a BOOTP REPLY message. */ + #define DHCP_OP_BOOTREPLY 0x02 + + /** BOOTP flag for a BOOTP broadcast message. */ + #define BOOTP_BROADCAST 0x8000 + + /** Magic DHCP cookie for a BOOTP message to identify it as a DHCP message. */ + #define DHCP_MAGIC_COOKIE 0x63538263 + + /** Unique transaction ID used to identify DHCP responses to the client. */ + #define DHCP_TRANSACTION_ID 0x13245466 + + /** DHCP message type for a DISCOVER message. */ + #define DHCP_DISCOVER 1 + + /** DHCP message type for an OFFER message. */ + #define DHCP_OFFER 2 + + /** DHCP message type for a REQUEST message. */ + #define DHCP_REQUEST 3 + + /** DHCP message type for a DECLINE message. */ + #define DHCP_DECLINE 4 + + /** DHCP message type for an ACK message. */ + #define DHCP_ACK 5 + + /** DHCP message type for a NAK message. */ + #define DHCP_NAK 6 + + /** DHCP message type for a RELEASE message. */ + #define DHCP_RELEASE 7 + + /** DHCP medium type for standard Ethernet. */ + #define DHCP_HTYPE_ETHERNET 1 + + /** DHCP message option for the network subnet mask. */ + #define DHCP_OPTION_SUBNET_MASK 1 + + /** DHCP message option for the network gateway IP. */ + #define DHCP_OPTION_ROUTER 3 + + /** DHCP message option for the network DNS server. */ + #define DHCP_OPTION_DNS_SERVER 6 + + /** DHCP message option for the requested client IP address. */ + #define DHCP_OPTION_REQ_IPADDR 50 + + /** DHCP message option for the IP address lease time. */ + #define DHCP_OPTION_LEASE_TIME 51 + + /** DHCP message option for the DHCP message type. */ + #define DHCP_OPTION_MSG_TYPE 53 + + /** DHCP message option for the DHCP server IP. */ + #define DHCP_OPTION_SERVER_ID 54 + + /** DHCP message option for the list of required options from the server. */ + #define DHCP_OPTION_REQ_LIST 55 + + /** DHCP message option for the options list terminator. */ + #define DHCP_OPTION_END 255 + + /* Type Defines: */ + /** Type define for a DHCP packet inside an Ethernet frame. */ + typedef struct + { + uint8_t Operation; /**< DHCP operation, either DHCP_OP_BOOTREQUEST or DHCP_OP_BOOTREPLY */ + uint8_t HardwareType; /**< Hardware carrier type constant */ + uint8_t HardwareAddressLength; /**< Length in bytes of a hardware (MAC) address on the network */ + uint8_t Hops; /**< Number of hops required to reach the server, unused */ + + uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */ + + uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */ + uint16_t Flags; /**< BOOTP packet flags */ + + uip_ipaddr_t ClientIP; /**< Client IP address, if already leased an IP */ + uip_ipaddr_t YourIP; /**< Client IP address */ + uip_ipaddr_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */ + uip_ipaddr_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */ + + uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */ + uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */ + uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */ + + uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */ + + uint8_t Options[]; /**< DHCP message options */ + } DHCP_Header_t; + + /* Function Prototypes: */ + uint8_t DHCPCommon_SetOption(uint8_t* DHCPOptionList, + const uint8_t Option, + const uint8_t DataLen, + void* const OptionData); + bool DHCPCommon_GetOption(const uint8_t* DHCPOptionList, + const uint8_t Option, + void* const Destination); + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/DHCPServerApp.c b/lib/lufa/Projects/Webserver/Lib/DHCPServerApp.c new file mode 100644 index 000000000..fea54ddb0 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DHCPServerApp.c @@ -0,0 +1,265 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * DHCP Server Application. When connected to the uIP stack, this will send IP configuration settings to a + * DHCP client on the network. + */ + +#define INCLUDE_FROM_DHCPSERVERAPP_C +#include "DHCPServerApp.h" + +#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) + +struct uip_conn* BroadcastConnection; + +uint8_t LeasedIPs[255 / 8]; + +/** Initialization function for the DHCP server. */ +void DHCPServerApp_Init(void) +{ + /* Listen on port 67 for DHCP server connections from hosts */ + uip_listen(HTONS(DHCP_SERVER_PORT)); + + /* Create a new UDP connection to the DHCP server port for the DHCP solicitation */ + struct uip_udp_conn* BroadcastConnection = uip_udp_new(&uip_broadcast_addr, HTONS(DHCP_CLIENT_PORT)); + + /* If the connection was successfully created, bind it to the local DHCP client port */ + if (BroadcastConnection != NULL) + uip_udp_bind(BroadcastConnection, HTONS(DHCP_SERVER_PORT)); + + /* Set all IP addresses as unleased */ + memset(LeasedIPs, 0x00, sizeof(LeasedIPs)); +} + +/** uIP stack application callback for the DHCP server. This function must be called each time the TCP/IP stack + * needs a UDP packet to be processed. + */ +void DHCPServerApp_Callback(void) +{ + DHCP_Header_t* const AppData = (DHCP_Header_t*)uip_appdata; + uint16_t AppDataSize = 0; + + /* Only process when new data arrives - don't retransmit lost packets */ + if (uip_newdata()) + { + /* Get the DHCP message type (if present), otherwise early-abort */ + uint8_t DHCPMessageType; + if (!(DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_MSG_TYPE, &DHCPMessageType))) + return; + + uip_ipaddr_t Netmask, GatewayIPAddress, PreferredClientIP; + struct uip_eth_addr RemoteMACAddress; + uint32_t TransactionID; + + /* Get configured network mask, gateway IP and extract out DHCP transaction ID and remote IP */ + uip_getnetmask(&Netmask); + uip_getdraddr(&GatewayIPAddress); + memcpy(&RemoteMACAddress, &AppData->ClientHardwareAddress, sizeof(struct uip_eth_addr)); + TransactionID = AppData->TransactionID; + + /* Try to extract out the client's preferred IP address if it is indicated in the packet */ + if (!(DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_REQ_IPADDR, &PreferredClientIP))) + memcpy(&PreferredClientIP, &uip_all_zeroes_addr, sizeof(uip_ipaddr_t)); + + switch (DHCPMessageType) + { + case DHCP_DISCOVER: + /* If no preference was made or the preferred IP is already taken, find a new address */ + if (DHCPServerApp_CheckIfIPLeased(&PreferredClientIP)) + DHCPServerApp_GetUnleasedIP(&PreferredClientIP); + + /* Create a new DHCP OFFER packet with the offered IP address */ + AppDataSize += DHCPServerApp_FillDHCPHeader(AppData, DHCP_OFFER, &RemoteMACAddress, &PreferredClientIP, TransactionID); + + /* Add network mask and router information to the list of DHCP OFFER packet options */ + AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_SUBNET_MASK, + sizeof(uip_ipaddr_t), &Netmask); + AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_ROUTER, + sizeof(uip_ipaddr_t), &GatewayIPAddress); + + /* Send the DHCP OFFER packet */ + uip_poll_conn(BroadcastConnection); + memcpy(&uip_udp_conn->ripaddr, &uip_broadcast_addr, sizeof(uip_ipaddr_t)); + uip_udp_send(AppDataSize); + + break; + case DHCP_REQUEST: + /* Check to see if the requested IP address has already been leased to a client */ + if (!(DHCPServerApp_CheckIfIPLeased(&PreferredClientIP))) + { + /* Create a new DHCP ACK packet to accept the IP address lease */ + AppDataSize += DHCPServerApp_FillDHCPHeader(AppData, DHCP_ACK, &RemoteMACAddress, &PreferredClientIP, TransactionID); + + /* Add network mask and router information to the list of DHCP ACK packet options */ + AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_SUBNET_MASK, + sizeof(uip_ipaddr_t), &Netmask); + AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_ROUTER, + sizeof(uip_ipaddr_t), &GatewayIPAddress); + + /* Mark the requested IP as leased to a client */ + DHCPServerApp_LeaseIP(&PreferredClientIP); + } + else + { + /* Create a new DHCP NAK packet to reject the requested allocation */ + AppDataSize += DHCPServerApp_FillDHCPHeader(AppData, DHCP_NAK, &RemoteMACAddress, &uip_all_zeroes_addr, TransactionID); + } + + /* Send the DHCP ACK or NAK packet */ + uip_poll_conn(BroadcastConnection); + memcpy(&uip_udp_conn->ripaddr, &uip_broadcast_addr, sizeof(uip_ipaddr_t)); + uip_udp_send(AppDataSize); + + break; + case DHCP_RELEASE: + /* Mark the IP address as released in the allocation table */ + DHCPServerApp_UnleaseIP(&uip_udp_conn->ripaddr); + break; + } + } +} + +/** Fills the DHCP packet response with the appropriate BOOTP header for DHCP. This fills out all the required + * fields, leaving only the additional DHCP options to be added to the packet before it is sent to the DHCP client. + * + * \param[out] DHCPHeader Location in the packet buffer where the BOOTP header should be written to + * \param[in] DHCPMessageType DHCP Message type, such as DHCP_DISCOVER + * \param[in] ClientHardwareAddress Client MAC address the created transaction should be directed to + * \param[in] PreferredClientIP Preferred IP that should be given to the client if it is unallocated + * \param[in] TransactionID Transaction ID the created transaction should be associated with + * + * \return Size in bytes of the created DHCP packet + */ +static uint16_t DHCPServerApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader, + const uint8_t DHCPMessageType, + const struct uip_eth_addr* const ClientHardwareAddress, + const uip_ipaddr_t* const PreferredClientIP, + const uint32_t TransactionID) +{ + /* Erase existing packet data so that we start will all 0x00 DHCP header data */ + memset(DHCPHeader, 0, sizeof(DHCP_Header_t)); + + DHCPHeader->Operation = DHCPMessageType; + DHCPHeader->HardwareType = DHCP_HTYPE_ETHERNET; + DHCPHeader->HardwareAddressLength = sizeof(MACAddress); + DHCPHeader->Hops = 0; + DHCPHeader->TransactionID = TransactionID; + DHCPHeader->ElapsedSeconds = 0; + DHCPHeader->Flags = 0; + memcpy(&DHCPHeader->NextServerIP, &uip_hostaddr, sizeof(uip_ipaddr_t)); + memcpy(&DHCPHeader->YourIP, PreferredClientIP, sizeof(uip_ipaddr_t)); + memcpy(&DHCPHeader->ClientHardwareAddress, ClientHardwareAddress, sizeof(struct uip_eth_addr)); + DHCPHeader->Cookie = DHCP_MAGIC_COOKIE; + + /* Add a DHCP message type and terminator options to the start of the DHCP options field */ + DHCPHeader->Options[0] = DHCP_OPTION_MSG_TYPE; + DHCPHeader->Options[1] = 1; + DHCPHeader->Options[2] = DHCPMessageType; + DHCPHeader->Options[3] = DHCP_OPTION_END; + + /* Calculate the total number of bytes added to the outgoing packet */ + return (sizeof(DHCP_Header_t) + 4); +} + +/** Checks to see if the nominated IP address has already been allocated to a client. + * + * \param[in] IPAddress IP Address whose lease status should be checked + * + * \pre The IP address must be within the same /24 subnet as the virtual webserver. + * + * \return Boolean \c true if the IP has already been leased to a client, \c false otherwise. + */ +static bool DHCPServerApp_CheckIfIPLeased(const uip_ipaddr_t* const IPAddress) +{ + uint8_t Byte = (IPAddress->u8[3] / 8); + uint8_t Mask = (1 << (IPAddress->u8[3] % 8)); + + /* Make sure that the requested IP address isn't already leased to the virtual server or another client */ + if (IPAddress->u8[3] && !(IPAddress->u8[3] == uip_hostaddr.u8[3]) && !(LeasedIPs[Byte] & Mask)) + return false; + else + return true; +} + +/** Retrieves the next unleased IP in the IP address pool. + * + * \param[out] NewIPAddress Location where the generated IP Address should be stored + */ +static void DHCPServerApp_GetUnleasedIP(uip_ipaddr_t* const NewIPAddress) +{ + uip_ipaddr_copy(NewIPAddress, &uip_hostaddr); + + /** Look through the current subnet, skipping the broadcast and zero IP addresses */ + for (uint8_t IP = 1; IP < 254; IP++) + { + /* Update new IP address to lease with the current IP address to test */ + NewIPAddress->u8[3] = IP; + + /* If we've found an unleased IP, abort with the updated IP stored for the called */ + if (!(DHCPServerApp_CheckIfIPLeased(NewIPAddress))) + return; + } +} + +/** Marks the given IP Address as leased in the address pool, so that it will not be + * allocated to another client unless it is first released. + * + * \param[in] IPAddress IP Address to mark as leased + * + * \pre The IP address must be within the same /24 subnet as the virtual webserver. + */ +static void DHCPServerApp_LeaseIP(const uip_ipaddr_t* const IPAddress) +{ + uint8_t Byte = (IPAddress->u8[3] / 8); + uint8_t Mask = (1 << (IPAddress->u8[3] % 8)); + + /* Mark the IP address as leased in the allocation table */ + LeasedIPs[Byte] |= Mask; +} + +/** Marks the given IP Address as not leased in the address pool, so that it can be + * allocated to another client upon request. + * + * \param[in] IPAddress IP Address to mark as not leased + * + * \pre The IP address must be within the same /24 subnet as the virtual webserver. + */ +static void DHCPServerApp_UnleaseIP(const uip_ipaddr_t* const IPAddress) +{ + uint8_t Byte = (IPAddress->u8[3] / 8); + uint8_t Mask = (1 << (IPAddress->u8[3] % 8)); + + /* Mark the IP address as unleased in the allocation table */ + LeasedIPs[Byte] &= ~Mask; +} +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/DHCPServerApp.h b/lib/lufa/Projects/Webserver/Lib/DHCPServerApp.h new file mode 100644 index 000000000..a9dae7bf3 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DHCPServerApp.h @@ -0,0 +1,64 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for DHCPServerApp.c. + */ + +#ifndef _DHCPSERVER_APP_H_ +#define _DHCPSERVER_APP_H_ + + /* Includes: */ + #include <stdio.h> + + #include <uip.h> + + #include "Config/AppConfig.h" + #include "../Webserver.h" + #include "DHCPCommon.h" + + /* Function Prototypes: */ + void DHCPServerApp_Init(void); + void DHCPServerApp_Callback(void); + + #if defined(INCLUDE_FROM_DHCPSERVERAPP_C) + static uint16_t DHCPServerApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader, + const uint8_t DHCPMessageType, + const struct uip_eth_addr* const ClientHardwareAddress, + const uip_ipaddr_t* const PreferredClientIP, + const uint32_t TransactionID); + static bool DHCPServerApp_CheckIfIPLeased(const uip_ipaddr_t* const IPAddress); + static void DHCPServerApp_GetUnleasedIP(uip_ipaddr_t* const NewIPAddress); + static void DHCPServerApp_LeaseIP(const uip_ipaddr_t* const IPAddress); + static void DHCPServerApp_UnleaseIP(const uip_ipaddr_t* const IPAddress); + #endif +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/DataflashManager.c b/lib/lufa/Projects/Webserver/Lib/DataflashManager.c new file mode 100644 index 000000000..b1111ce39 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DataflashManager.c @@ -0,0 +1,534 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Functions to manage the physical Dataflash media, including reading and writing of + * blocks of data. These functions are called by the SCSI layer when data must be stored + * or retrieved to/from the physical storage media. If a different media is used (such + * as a SD card or EEPROM), functions similar to these will need to be generated. + */ + +#define INCLUDE_FROM_DATAFLASHMANAGER_C +#include "DataflashManager.h" + +/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from + * the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes + * them to the Dataflash in Dataflash page sized blocks. + * + * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state + * \param[in] BlockAddress Data block starting address for the write sequence + * \param[in] TotalBlocks Number of blocks of data to write + */ +void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks) +{ + uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); + uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); + uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); + bool UsingSecondBuffer = false; + + /* Select the correct starting Dataflash IC for the block requested */ + Dataflash_SelectChipFromPage(CurrDFPage); + +#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) + /* Copy selected dataflash's current page contents to the Dataflash buffer */ + Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); + Dataflash_SendAddressBytes(CurrDFPage, 0); + Dataflash_WaitWhileBusy(); +#endif + + /* Send the Dataflash buffer write command */ + Dataflash_SendByte(DF_CMD_BUFF1WRITE); + Dataflash_SendAddressBytes(0, CurrDFPageByte); + + /* Wait until endpoint is ready before continuing */ + if (Endpoint_WaitUntilReady()) + return; + + while (TotalBlocks) + { + uint8_t BytesInBlockDiv16 = 0; + + /* Write an endpoint packet sized data block to the Dataflash */ + while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) + { + /* Check if the endpoint is currently empty */ + if (!(Endpoint_IsReadWriteAllowed())) + { + /* Clear the current endpoint bank */ + Endpoint_ClearOUT(); + + /* Wait until the host has sent another packet */ + if (Endpoint_WaitUntilReady()) + return; + } + + /* Check if end of Dataflash page reached */ + if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) + { + /* Write the Dataflash buffer contents back to the Dataflash page */ + Dataflash_WaitWhileBusy(); + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); + Dataflash_SendAddressBytes(CurrDFPage, 0); + + /* Reset the Dataflash buffer counter, increment the page counter */ + CurrDFPageByteDiv16 = 0; + CurrDFPage++; + + /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ + if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) + UsingSecondBuffer = !(UsingSecondBuffer); + + /* Select the next Dataflash chip based on the new Dataflash page index */ + Dataflash_SelectChipFromPage(CurrDFPage); + +#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) + /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ + if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) + { + /* Copy selected dataflash's current page contents to the Dataflash buffer */ + Dataflash_WaitWhileBusy(); + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); + Dataflash_SendAddressBytes(CurrDFPage, 0); + Dataflash_WaitWhileBusy(); + } +#endif + + /* Send the Dataflash buffer write command */ + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); + Dataflash_SendAddressBytes(0, 0); + } + + /* Write one 16-byte chunk of data to the Dataflash */ + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + Dataflash_SendByte(Endpoint_Read_8()); + + /* Increment the Dataflash page 16 byte block counter */ + CurrDFPageByteDiv16++; + + /* Increment the block 16 byte block counter */ + BytesInBlockDiv16++; + + /* Check if the current command is being aborted by the host */ + if (MSInterfaceInfo->State.IsMassStoreReset) + return; + } + + /* Decrement the blocks remaining counter */ + TotalBlocks--; + } + + /* Write the Dataflash buffer contents back to the Dataflash page */ + Dataflash_WaitWhileBusy(); + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); + Dataflash_SendAddressBytes(CurrDFPage, 0x00); + Dataflash_WaitWhileBusy(); + + /* If the endpoint is empty, clear it ready for the next packet from the host */ + if (!(Endpoint_IsReadWriteAllowed())) + Endpoint_ClearOUT(); + + /* Deselect all Dataflash chips */ + Dataflash_DeselectChip(); +} + +/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into + * the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash + * and writes them in OS sized blocks to the endpoint. + * + * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state + * \param[in] BlockAddress Data block starting address for the read sequence + * \param[in] TotalBlocks Number of blocks of data to read + */ +void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks) +{ + uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); + uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); + uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); + + /* Select the correct starting Dataflash IC for the block requested */ + Dataflash_SelectChipFromPage(CurrDFPage); + + /* Send the Dataflash main memory page read command */ + Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); + Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + + /* Wait until endpoint is ready before continuing */ + if (Endpoint_WaitUntilReady()) + return; + + while (TotalBlocks) + { + uint8_t BytesInBlockDiv16 = 0; + + /* Read an endpoint packet sized data block from the Dataflash */ + while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) + { + /* Check if the endpoint is currently full */ + if (!(Endpoint_IsReadWriteAllowed())) + { + /* Clear the endpoint bank to send its contents to the host */ + Endpoint_ClearIN(); + + /* Wait until the endpoint is ready for more data */ + if (Endpoint_WaitUntilReady()) + return; + } + + /* Check if end of Dataflash page reached */ + if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) + { + /* Reset the Dataflash buffer counter, increment the page counter */ + CurrDFPageByteDiv16 = 0; + CurrDFPage++; + + /* Select the next Dataflash chip based on the new Dataflash page index */ + Dataflash_SelectChipFromPage(CurrDFPage); + + /* Send the Dataflash main memory page read command */ + Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); + Dataflash_SendAddressBytes(CurrDFPage, 0); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + } + + /* Read one 16-byte chunk of data from the Dataflash */ + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + Endpoint_Write_8(Dataflash_ReceiveByte()); + + /* Increment the Dataflash page 16 byte block counter */ + CurrDFPageByteDiv16++; + + /* Increment the block 16 byte block counter */ + BytesInBlockDiv16++; + + /* Check if the current command is being aborted by the host */ + if (MSInterfaceInfo->State.IsMassStoreReset) + return; + } + + /* Decrement the blocks remaining counter */ + TotalBlocks--; + } + + /* If the endpoint is full, send its contents to the host */ + if (!(Endpoint_IsReadWriteAllowed())) + Endpoint_ClearIN(); + + /* Deselect all Dataflash chips */ + Dataflash_DeselectChip(); +} + +/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from + * the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the + * Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the + * Dataflash. + * + * \param[in] BlockAddress Data block starting address for the write sequence + * \param[in] TotalBlocks Number of blocks of data to write + * \param[in] BufferPtr Pointer to the data source RAM buffer + */ +void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, + uint16_t TotalBlocks, + const uint8_t* BufferPtr) +{ + uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); + uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); + uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); + bool UsingSecondBuffer = false; + + /* Select the correct starting Dataflash IC for the block requested */ + Dataflash_SelectChipFromPage(CurrDFPage); + +#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) + /* Copy selected dataflash's current page contents to the Dataflash buffer */ + Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); + Dataflash_SendAddressBytes(CurrDFPage, 0); + Dataflash_WaitWhileBusy(); +#endif + + /* Send the Dataflash buffer write command */ + Dataflash_SendByte(DF_CMD_BUFF1WRITE); + Dataflash_SendAddressBytes(0, CurrDFPageByte); + + while (TotalBlocks) + { + uint8_t BytesInBlockDiv16 = 0; + + /* Write an endpoint packet sized data block to the Dataflash */ + while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) + { + /* Check if end of Dataflash page reached */ + if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) + { + /* Write the Dataflash buffer contents back to the Dataflash page */ + Dataflash_WaitWhileBusy(); + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); + Dataflash_SendAddressBytes(CurrDFPage, 0); + + /* Reset the Dataflash buffer counter, increment the page counter */ + CurrDFPageByteDiv16 = 0; + CurrDFPage++; + + /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ + if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) + UsingSecondBuffer = !(UsingSecondBuffer); + + /* Select the next Dataflash chip based on the new Dataflash page index */ + Dataflash_SelectChipFromPage(CurrDFPage); + +#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) + /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ + if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) + { + /* Copy selected dataflash's current page contents to the Dataflash buffer */ + Dataflash_WaitWhileBusy(); + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); + Dataflash_SendAddressBytes(CurrDFPage, 0); + Dataflash_WaitWhileBusy(); + } +#endif + + /* Send the Dataflash buffer write command */ + Dataflash_ToggleSelectedChipCS(); + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); + Dataflash_SendAddressBytes(0, 0); + } + + /* Write one 16-byte chunk of data to the Dataflash */ + for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) + Dataflash_SendByte(*(BufferPtr++)); + + /* Increment the Dataflash page 16 byte block counter */ + CurrDFPageByteDiv16++; + + /* Increment the block 16 byte block counter */ + BytesInBlockDiv16++; + } + + /* Decrement the blocks remaining counter */ + TotalBlocks--; + } + + /* Write the Dataflash buffer contents back to the Dataflash page */ + Dataflash_WaitWhileBusy(); + Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); + Dataflash_SendAddressBytes(CurrDFPage, 0x00); + Dataflash_WaitWhileBusy(); + + /* Deselect all Dataflash chips */ + Dataflash_DeselectChip(); +} + +/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into + * the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash + * and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read + * the files stored on the Dataflash. + * + * \param[in] BlockAddress Data block starting address for the read sequence + * \param[in] TotalBlocks Number of blocks of data to read + * \param[out] BufferPtr Pointer to the data destination RAM buffer + */ +void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, + uint16_t TotalBlocks, + uint8_t* BufferPtr) +{ + uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); + uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); + uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); + + /* Select the correct starting Dataflash IC for the block requested */ + Dataflash_SelectChipFromPage(CurrDFPage); + + /* Send the Dataflash main memory page read command */ + Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); + Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + + while (TotalBlocks) + { + uint8_t BytesInBlockDiv16 = 0; + + /* Read an endpoint packet sized data block from the Dataflash */ + while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) + { + /* Check if end of Dataflash page reached */ + if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) + { + /* Reset the Dataflash buffer counter, increment the page counter */ + CurrDFPageByteDiv16 = 0; + CurrDFPage++; + + /* Select the next Dataflash chip based on the new Dataflash page index */ + Dataflash_SelectChipFromPage(CurrDFPage); + + /* Send the Dataflash main memory page read command */ + Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); + Dataflash_SendAddressBytes(CurrDFPage, 0); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + Dataflash_SendByte(0x00); + } + + /* Read one 16-byte chunk of data from the Dataflash */ + for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) + *(BufferPtr++) = Dataflash_ReceiveByte(); + + /* Increment the Dataflash page 16 byte block counter */ + CurrDFPageByteDiv16++; + + /* Increment the block 16 byte block counter */ + BytesInBlockDiv16++; + } + + /* Decrement the blocks remaining counter */ + TotalBlocks--; + } + + /* Deselect all Dataflash chips */ + Dataflash_DeselectChip(); +} + +/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */ +void DataflashManager_ResetDataflashProtections(void) +{ + /* Select first Dataflash chip, send the read status register command */ + Dataflash_SelectChip(DATAFLASH_CHIP1); + Dataflash_SendByte(DF_CMD_GETSTATUS); + + /* Check if sector protection is enabled */ + if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) + { + Dataflash_ToggleSelectedChipCS(); + + /* Send the commands to disable sector protection */ + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); + } + + /* Select second Dataflash chip (if present on selected board), send read status register command */ + #if (DATAFLASH_TOTALCHIPS == 2) + Dataflash_SelectChip(DATAFLASH_CHIP2); + Dataflash_SendByte(DF_CMD_GETSTATUS); + + /* Check if sector protection is enabled */ + if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) + { + Dataflash_ToggleSelectedChipCS(); + + /* Send the commands to disable sector protection */ + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); + Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); + } + #endif + + /* Deselect current Dataflash chip */ + Dataflash_DeselectChip(); +} + +/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. + * + * \return Boolean \c true if all media chips are working, \c false otherwise + */ +bool DataflashManager_CheckDataflashOperation(void) +{ + uint8_t ReturnByte; + + /* Test first Dataflash IC is present and responding to commands */ + Dataflash_SelectChip(DATAFLASH_CHIP1); + Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); + ReturnByte = Dataflash_ReceiveByte(); + Dataflash_DeselectChip(); + + /* If returned data is invalid, fail the command */ + if (ReturnByte != DF_MANUFACTURER_ATMEL) + return false; + + #if (DATAFLASH_TOTALCHIPS == 2) + /* Test second Dataflash IC is present and responding to commands */ + Dataflash_SelectChip(DATAFLASH_CHIP2); + Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); + ReturnByte = Dataflash_ReceiveByte(); + Dataflash_DeselectChip(); + + /* If returned data is invalid, fail the command */ + if (ReturnByte != DF_MANUFACTURER_ATMEL) + return false; + #endif + + return true; +} + diff --git a/lib/lufa/Projects/Webserver/Lib/DataflashManager.h b/lib/lufa/Projects/Webserver/Lib/DataflashManager.h new file mode 100644 index 000000000..367fbac8c --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/DataflashManager.h @@ -0,0 +1,87 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for DataflashManager.c. + */ + +#ifndef _DATAFLASH_MANAGER_H_ +#define _DATAFLASH_MANAGER_H_ + + /* Includes: */ + #include <avr/io.h> + + #include "../Descriptors.h" + + #include <LUFA/Common/Common.h> + #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Drivers/Board/Dataflash.h> + + /* Preprocessor Checks: */ + #if (DATAFLASH_PAGE_SIZE % 16) + #error Dataflash page size must be a multiple of 16 bytes. + #endif + + /* Defines: */ + /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */ + #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS) + + /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying + * storage media (Dataflash) using a different native block size. Do not change this value. + */ + #define VIRTUAL_MEMORY_BLOCK_SIZE 512 + + /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not + * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size. + */ + #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) + + /** Indicates if the disk is write protected or not. */ + #define DISK_READ_ONLY false + + /* Function Prototypes: */ + void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks); + void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks); + void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, + uint16_t TotalBlocks, + const uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); + void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, + uint16_t TotalBlocks, + uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); + void DataflashManager_ResetDataflashProtections(void); + bool DataflashManager_CheckDataflashOperation(void); + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/00readme.txt b/lib/lufa/Projects/Webserver/Lib/FATFs/00readme.txt new file mode 100644 index 000000000..80d8843d1 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/FATFs/00readme.txt @@ -0,0 +1,135 @@ +FatFs Module Source Files R0.09a (C)ChaN, 2012 + + +FILES + + ffconf.h Configuration file for FatFs module. + ff.h Common include file for FatFs and application module. + ff.c FatFs module. + diskio.h Common include file for FatFs and disk I/O module. + diskio.c An example of glue function to attach existing disk I/O module to FatFs. + integer.h Integer type definitions for FatFs. + option Optional external functions. + + Low level disk I/O module is not included in this archive because the FatFs + module is only a generic file system layer and not depend on any specific + storage device. You have to provide a low level disk I/O module that written + to control your storage device. + + + +AGREEMENTS + + FatFs module is an open source software to implement FAT file system to + small embedded systems. This is a free software and is opened for education, + research and commercial developments under license policy of following trems. + + Copyright (C) 2012, ChaN, all right reserved. + + * The FatFs module is a free software and there is NO WARRANTY. + * No restriction on use. You can use, modify and redistribute it for + personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY. + * Redistributions of source code must retain the above copyright notice. + + + +REVISION HISTORY + + Feb 26, 2006 R0.00 Prototype + + Apr 29, 2006 R0.01 First release. + + Jun 01, 2006 R0.02 Added FAT12. + Removed unbuffered mode. + Fixed a problem on small (<32M) patition. + + Jun 10, 2006 R0.02a Added a configuration option _FS_MINIMUM. + + Sep 22, 2006 R0.03 Added f_rename. + Changed option _FS_MINIMUM to _FS_MINIMIZE. + + Dec 11, 2006 R0.03a Improved cluster scan algolithm to write files fast. + Fixed f_mkdir creates incorrect directory on FAT32. + + Feb 04, 2007 R0.04 Supported multiple drive system. (FatFs) + Changed some APIs for multiple drive system. + Added f_mkfs. (FatFs) + Added _USE_FAT32 option. (Tiny-FatFs) + + Apr 01, 2007 R0.04a Supported multiple partitions on a plysical drive. (FatFs) + Fixed an endian sensitive code in f_mkfs. (FatFs) + Added a capability of extending the file size to f_lseek. + Added minimization level 3. + Fixed a problem that can collapse a sector when recreate an + existing file in any sub-directory at non FAT32 cfg. (Tiny-FatFs) + + May 05, 2007 R0.04b Added _USE_NTFLAG option. + Added FSInfo support. + Fixed some problems corresponds to FAT32. (Tiny-FatFs) + Fixed DBCS name can result FR_INVALID_NAME. + Fixed short seek (0 < ofs <= csize) collapses the file object. + + Aug 25, 2007 R0.05 Changed arguments of f_read, f_write. + Changed arguments of f_mkfs. (FatFs) + Fixed f_mkfs on FAT32 creates incorrect FSInfo. (FatFs) + Fixed f_mkdir on FAT32 creates incorrect directory. (FatFs) + + Feb 03, 2008 R0.05a Added f_truncate(). + Added f_utime(). + Fixed off by one error at FAT sub-type determination. + Fixed btr in f_read() can be mistruncated. + Fixed cached sector is not flushed when create and close without write. + + Apr 01, 2008 R0.06 Added f_forward(). (Tiny-FatFs) + Added string functions: fputc(), fputs(), fprintf() and fgets(). + Improved performance of f_lseek() on move to the same or following cluster. + + Apr 01, 2009, R0.07 Merged Tiny-FatFs as a buffer configuration option. + Added long file name support. + Added multiple code page support. + Added re-entrancy for multitask operation. + Added auto cluster size selection to f_mkfs(). + Added rewind option to f_readdir(). + Changed result code of critical errors. + Renamed string functions to avoid name collision. + + Apr 14, 2009, R0.07a Separated out OS dependent code on reentrant cfg. + Added multiple sector size support. + + Jun 21, 2009, R0.07c Fixed f_unlink() may return FR_OK on error. + Fixed wrong cache control in f_lseek(). + Added relative path feature. + Added f_chdir(). + Added f_chdrive(). + Added proper case conversion for extended characters. + + Nov 03, 2009 R0.07e Separated out configuration options from ff.h to ffconf.h. + Added a configuration option, _LFN_UNICODE. + Fixed f_unlink() fails to remove a sub-dir on _FS_RPATH. + Fixed name matching error on the 13 char boundary. + Changed f_readdir() to return the SFN with always upper case on non-LFN cfg. + + May 15, 2010, R0.08 Added a memory configuration option. (_USE_LFN) + Added file lock feature. (_FS_SHARE) + Added fast seek feature. (_USE_FASTSEEK) + Changed some types on the API, XCHAR->TCHAR. + Changed fname member in the FILINFO structure on Unicode cfg. + String functions support UTF-8 encoding files on Unicode cfg. + + Aug 16,'10 R0.08a Added f_getcwd(). (_FS_RPATH = 2) + Added sector erase feature. (_USE_ERASE) + Moved file lock semaphore table from fs object to the bss. + Fixed a wrong directory entry is created on non-LFN cfg when the given name contains ';'. + Fixed f_mkfs() creates wrong FAT32 volume. + + Jan 15,'11 R0.08b Fast seek feature is also applied to f_read() and f_write(). + f_lseek() reports required table size on creating CLMP. + Extended format syntax of f_printf function. + Ignores duplicated directory separators in given path names. + + Sep 06,'11 R0.09 f_mkfs() supports multiple partition to finish the multiple partition feature. + Added f_fdisk(). (_MULTI_PARTITION = 2) + + Aug 27,'12 R0.09a Fixed assertion failure due to OS/2 EA on FAT12/16. + Changed API rejects null object pointer to avoid crash. + Changed option name _FS_SHARE to _FS_LOCK. diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/diskio.c b/lib/lufa/Projects/Webserver/Lib/FATFs/diskio.c new file mode 100644 index 000000000..b119b1a40 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/FATFs/diskio.c @@ -0,0 +1,65 @@ +/*-----------------------------------------------------------------------*/ +/* Low level disk I/O module skeleton for FatFs (C)ChaN, 2007 */ +/*-----------------------------------------------------------------------*/ +/* This is a stub disk I/O module that acts as front end of the existing */ +/* disk I/O modules and attach it to FatFs module with common interface. */ +/*-----------------------------------------------------------------------*/ + +#include "diskio.h" + +/*-----------------------------------------------------------------------*/ +/* Initialize a Drive */ + +DSTATUS disk_initialize ( + BYTE drv /* Physical drive number (0..) */ +) +{ + return FR_OK; +} + + + +/*-----------------------------------------------------------------------*/ +/* Return Disk Status */ + +DSTATUS disk_status ( + BYTE drv /* Physical drive number (0..) */ +) +{ + return FR_OK; +} + + + +/*-----------------------------------------------------------------------*/ +/* Read Sector(s) */ + +DRESULT disk_read ( + BYTE drv, /* Physical drive number (0..) */ + BYTE *buff, /* Data buffer to store read data */ + DWORD sector, /* Sector address (LBA) */ + BYTE count /* Number of sectors to read (1..128) */ +) +{ + DataflashManager_ReadBlocks_RAM(sector, count, buff); + return RES_OK; +} + + + +/*-----------------------------------------------------------------------*/ +/* Write Sector(s) */ + +#if _READONLY == 0 +DRESULT disk_write ( + BYTE drv, /* Physical drive number (0..) */ + const BYTE *buff, /* Data to be written */ + DWORD sector, /* Sector address (LBA) */ + BYTE count /* Number of sectors to write (1..128) */ +) +{ + DataflashManager_WriteBlocks_RAM(sector, count, buff); + return RES_OK; +} +#endif /* _READONLY */ + diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/diskio.h b/lib/lufa/Projects/Webserver/Lib/FATFs/diskio.h new file mode 100644 index 000000000..65e3048a0 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/FATFs/diskio.h @@ -0,0 +1,52 @@ +/*----------------------------------------------------------------------- +/ Low level disk interface module include file +/-----------------------------------------------------------------------*/ + +#ifndef _DISKIO_DEFINED +#define _DISKIO_DEFINED + +#ifdef __cplusplus +extern "C" { +#endif + +#include "integer.h" +#include "ff.h" + +#include "../DataflashManager.h" + + +/* Status of Disk Functions */ +typedef BYTE DSTATUS; + +/* Results of Disk Functions */ +typedef enum { + RES_OK = 0, /* 0: Successful */ + RES_ERROR, /* 1: R/W Error */ + RES_WRPRT, /* 2: Write Protected */ + RES_NOTRDY, /* 3: Not Ready */ + RES_PARERR /* 4: Invalid Parameter */ +} DRESULT; + + +/*---------------------------------------*/ +/* Prototypes for disk control functions */ + +DSTATUS disk_initialize (BYTE); +DSTATUS disk_status (BYTE); +DRESULT disk_read (BYTE, BYTE*, DWORD, BYTE); +DRESULT disk_write (BYTE, const BYTE*, DWORD, BYTE); +DRESULT disk_ioctl (BYTE, BYTE, void*); + + +/* Disk Status Bits (DSTATUS) */ + +#define STA_NOINIT 0x01 /* Drive not initialized */ +#define STA_NODISK 0x02 /* No medium in the drive */ +#define STA_PROTECT 0x04 /* Write protected */ + + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/ff.c b/lib/lufa/Projects/Webserver/Lib/FATFs/ff.c new file mode 100644 index 000000000..2f58adf83 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/FATFs/ff.c @@ -0,0 +1,4139 @@ +/*----------------------------------------------------------------------------/ +/ FatFs - FAT file system module R0.09a (C)ChaN, 2012 +/-----------------------------------------------------------------------------/ +/ FatFs module is a generic FAT file system module for small embedded systems. +/ This is a free software that opened for education, research and commercial +/ developments under license policy of following terms. +/ +/ Copyright (C) 2012, ChaN, all right reserved. +/ +/ * The FatFs module is a free software and there is NO WARRANTY. +/ * No restriction on use. You can use, modify and redistribute it for +/ personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY. +/ * Redistributions of source code must retain the above copyright notice. +/ +/-----------------------------------------------------------------------------/ +/ Feb 26,'06 R0.00 Prototype. +/ +/ Apr 29,'06 R0.01 First stable version. +/ +/ Jun 01,'06 R0.02 Added FAT12 support. +/ Removed unbuffered mode. +/ Fixed a problem on small (<32M) partition. +/ Jun 10,'06 R0.02a Added a configuration option (_FS_MINIMUM). +/ +/ Sep 22,'06 R0.03 Added f_rename(). +/ Changed option _FS_MINIMUM to _FS_MINIMIZE. +/ Dec 11,'06 R0.03a Improved cluster scan algorithm to write files fast. +/ Fixed f_mkdir() creates incorrect directory on FAT32. +/ +/ Feb 04,'07 R0.04 Supported multiple drive system. +/ Changed some interfaces for multiple drive system. +/ Changed f_mountdrv() to f_mount(). +/ Added f_mkfs(). +/ Apr 01,'07 R0.04a Supported multiple partitions on a physical drive. +/ Added a capability of extending file size to f_lseek(). +/ Added minimization level 3. +/ Fixed an endian sensitive code in f_mkfs(). +/ May 05,'07 R0.04b Added a configuration option _USE_NTFLAG. +/ Added FSInfo support. +/ Fixed DBCS name can result FR_INVALID_NAME. +/ Fixed short seek (<= csize) collapses the file object. +/ +/ Aug 25,'07 R0.05 Changed arguments of f_read(), f_write() and f_mkfs(). +/ Fixed f_mkfs() on FAT32 creates incorrect FSInfo. +/ Fixed f_mkdir() on FAT32 creates incorrect directory. +/ Feb 03,'08 R0.05a Added f_truncate() and f_utime(). +/ Fixed off by one error at FAT sub-type determination. +/ Fixed btr in f_read() can be mistruncated. +/ Fixed cached sector is not flushed when create and close without write. +/ +/ Apr 01,'08 R0.06 Added fputc(), fputs(), fprintf() and fgets(). +/ Improved performance of f_lseek() on moving to the same or following cluster. +/ +/ Apr 01,'09 R0.07 Merged Tiny-FatFs as a configuration option. (_FS_TINY) +/ Added long file name feature. +/ Added multiple code page feature. +/ Added re-entrancy for multitask operation. +/ Added auto cluster size selection to f_mkfs(). +/ Added rewind option to f_readdir(). +/ Changed result code of critical errors. +/ Renamed string functions to avoid name collision. +/ Apr 14,'09 R0.07a Separated out OS dependent code on reentrant cfg. +/ Added multiple sector size feature. +/ Jun 21,'09 R0.07c Fixed f_unlink() can return FR_OK on error. +/ Fixed wrong cache control in f_lseek(). +/ Added relative path feature. +/ Added f_chdir() and f_chdrive(). +/ Added proper case conversion to extended char. +/ Nov 03,'09 R0.07e Separated out configuration options from ff.h to ffconf.h. +/ Fixed f_unlink() fails to remove a sub-dir on _FS_RPATH. +/ Fixed name matching error on the 13 char boundary. +/ Added a configuration option, _LFN_UNICODE. +/ Changed f_readdir() to return the SFN with always upper case on non-LFN cfg. +/ +/ May 15,'10 R0.08 Added a memory configuration option. (_USE_LFN = 3) +/ Added file lock feature. (_FS_SHARE) +/ Added fast seek feature. (_USE_FASTSEEK) +/ Changed some types on the API, XCHAR->TCHAR. +/ Changed fname member in the FILINFO structure on Unicode cfg. +/ String functions support UTF-8 encoding files on Unicode cfg. +/ Aug 16,'10 R0.08a Added f_getcwd(). (_FS_RPATH = 2) +/ Added sector erase feature. (_USE_ERASE) +/ Moved file lock semaphore table from fs object to the bss. +/ Fixed a wrong directory entry is created on non-LFN cfg when the given name contains ';'. +/ Fixed f_mkfs() creates wrong FAT32 volume. +/ Jan 15,'11 R0.08b Fast seek feature is also applied to f_read() and f_write(). +/ f_lseek() reports required table size on creating CLMP. +/ Extended format syntax of f_printf function. +/ Ignores duplicated directory separators in given path name. +/ +/ Sep 06,'11 R0.09 f_mkfs() supports multiple partition to finish the multiple partition feature. +/ Added f_fdisk(). (_MULTI_PARTITION = 2) +/ Aug 27,'12 R0.09a Fixed assertion failure due to OS/2 EA on FAT12/16 volume. +/ Changed f_open() and f_opendir reject null object pointer to avoid crash. +/ Changed option name _FS_SHARE to _FS_LOCK. +/---------------------------------------------------------------------------*/ + +#include "ff.h" /* FatFs configurations and declarations */ +#include "diskio.h" /* Declarations of low level disk I/O functions */ + + +/*-------------------------------------------------------------------------- + + Module Private Definitions + +---------------------------------------------------------------------------*/ + +#if _FATFS != 4004 /* Revision ID */ +#error Wrong include file (ff.h). +#endif + + +/* Definitions on sector size */ +#if _MAX_SS != 512 && _MAX_SS != 1024 && _MAX_SS != 2048 && _MAX_SS != 4096 +#error Wrong sector size. +#endif +#if _MAX_SS != 512 +#define SS(fs) ((fs)->ssize) /* Variable sector size */ +#else +#define SS(fs) 512U /* Fixed sector size */ +#endif + + +/* Reentrancy related */ +#if _FS_REENTRANT +#if _USE_LFN == 1 +#error Static LFN work area must not be used in re-entrant configuration. +#endif +#define ENTER_FF(fs) { if (!lock_fs(fs)) return FR_TIMEOUT; } +#define LEAVE_FF(fs, res) { unlock_fs(fs, res); return res; } +#else +#define ENTER_FF(fs) +#define LEAVE_FF(fs, res) return res +#endif + +#define ABORT(fs, res) { fp->flag |= FA__ERROR; LEAVE_FF(fs, res); } + + +/* File access control feature */ +#if _FS_LOCK +#if _FS_READONLY +#error _FS_LOCK must be 0 on read-only cfg. +#endif +typedef struct { + FATFS *fs; /* File ID 1, volume (NULL:blank entry) */ + DWORD clu; /* File ID 2, directory */ + WORD idx; /* File ID 3, directory index */ + WORD ctr; /* File open counter, 0:none, 0x01..0xFF:read open count, 0x100:write mode */ +} FILESEM; +#endif + + + +/* DBCS code ranges and SBCS extend char conversion table */ + +#if _CODE_PAGE == 932 /* Japanese Shift-JIS */ +#define _DF1S 0x81 /* DBC 1st byte range 1 start */ +#define _DF1E 0x9F /* DBC 1st byte range 1 end */ +#define _DF2S 0xE0 /* DBC 1st byte range 2 start */ +#define _DF2E 0xFC /* DBC 1st byte range 2 end */ +#define _DS1S 0x40 /* DBC 2nd byte range 1 start */ +#define _DS1E 0x7E /* DBC 2nd byte range 1 end */ +#define _DS2S 0x80 /* DBC 2nd byte range 2 start */ +#define _DS2E 0xFC /* DBC 2nd byte range 2 end */ + +#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x40 +#define _DS1E 0x7E +#define _DS2S 0x80 +#define _DS2E 0xFE + +#elif _CODE_PAGE == 949 /* Korean */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x41 +#define _DS1E 0x5A +#define _DS2S 0x61 +#define _DS2E 0x7A +#define _DS3S 0x81 +#define _DS3E 0xFE + +#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */ +#define _DF1S 0x81 +#define _DF1E 0xFE +#define _DS1S 0x40 +#define _DS1E 0x7E +#define _DS2S 0xA1 +#define _DS2E 0xFE + +#elif _CODE_PAGE == 437 /* U.S. (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 720 /* Arabic (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 737 /* Greek (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \ + 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 775 /* Baltic (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 850 /* Multilingual Latin 1 (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ + 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 852 /* Latin 2 (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \ + 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF} + +#elif _CODE_PAGE == 855 /* Cyrillic (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \ + 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \ + 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 857 /* Turkish (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \ + 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 858 /* Multilingual Latin 1 + Euro (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ + 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 862 /* Hebrew (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 866 /* Russian (OEM) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 874 /* Thai (OEM, Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} + +#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ + 0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF} + +#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \ + 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} + +#elif _CODE_PAGE == 1253 /* Greek (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \ + 0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF} + +#elif _CODE_PAGE == 1254 /* Turkish (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \ + 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} + +#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 1256 /* Arabic (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF} + +#elif _CODE_PAGE == 1257 /* Baltic (Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ + 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} + +#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */ +#define _DF1S 0 +#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \ + 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F} + +#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */ +#if _USE_LFN +#error Cannot use LFN feature without valid code page. +#endif +#define _DF1S 0 + +#else +#error Unknown code page + +#endif + + +/* Character code support macros */ +#define IsUpper(c) (((c)>='A')&&((c)<='Z')) +#define IsLower(c) (((c)>='a')&&((c)<='z')) +#define IsDigit(c) (((c)>='0')&&((c)<='9')) + +#if _DF1S /* Code page is DBCS */ + +#ifdef _DF2S /* Two 1st byte areas */ +#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E)) +#else /* One 1st byte area */ +#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) +#endif + +#ifdef _DS3S /* Three 2nd byte areas */ +#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E)) +#else /* Two 2nd byte areas */ +#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E)) +#endif + +#else /* Code page is SBCS */ + +#define IsDBCS1(c) 0 +#define IsDBCS2(c) 0 + +#endif /* _DF1S */ + + +/* Name status flags */ +#define NS 11 /* Index of name status byte in fn[] */ +#define NS_LOSS 0x01 /* Out of 8.3 format */ +#define NS_LFN 0x02 /* Force to create LFN entry */ +#define NS_LAST 0x04 /* Last segment */ +#define NS_BODY 0x08 /* Lower case flag (body) */ +#define NS_EXT 0x10 /* Lower case flag (ext) */ +#define NS_DOT 0x20 /* Dot entry */ + + +/* FAT sub-type boundaries */ +/* Note that the FAT spec by Microsoft says 4085 but Windows works with 4087! */ +#define MIN_FAT16 4086 /* Minimum number of clusters for FAT16 */ +#define MIN_FAT32 65526 /* Minimum number of clusters for FAT32 */ + + +/* FatFs refers the members in the FAT structures as byte array instead of +/ structure member because the structure is not binary compatible between +/ different platforms */ + +#define BS_jmpBoot 0 /* Jump instruction (3) */ +#define BS_OEMName 3 /* OEM name (8) */ +#define BPB_BytsPerSec 11 /* Sector size [byte] (2) */ +#define BPB_SecPerClus 13 /* Cluster size [sector] (1) */ +#define BPB_RsvdSecCnt 14 /* Size of reserved area [sector] (2) */ +#define BPB_NumFATs 16 /* Number of FAT copies (1) */ +#define BPB_RootEntCnt 17 /* Number of root dir entries for FAT12/16 (2) */ +#define BPB_TotSec16 19 /* Volume size [sector] (2) */ +#define BPB_Media 21 /* Media descriptor (1) */ +#define BPB_FATSz16 22 /* FAT size [sector] (2) */ +#define BPB_SecPerTrk 24 /* Track size [sector] (2) */ +#define BPB_NumHeads 26 /* Number of heads (2) */ +#define BPB_HiddSec 28 /* Number of special hidden sectors (4) */ +#define BPB_TotSec32 32 /* Volume size [sector] (4) */ +#define BS_DrvNum 36 /* Physical drive number (2) */ +#define BS_BootSig 38 /* Extended boot signature (1) */ +#define BS_VolID 39 /* Volume serial number (4) */ +#define BS_VolLab 43 /* Volume label (8) */ +#define BS_FilSysType 54 /* File system type (1) */ +#define BPB_FATSz32 36 /* FAT size [sector] (4) */ +#define BPB_ExtFlags 40 /* Extended flags (2) */ +#define BPB_FSVer 42 /* File system version (2) */ +#define BPB_RootClus 44 /* Root dir first cluster (4) */ +#define BPB_FSInfo 48 /* Offset of FSInfo sector (2) */ +#define BPB_BkBootSec 50 /* Offset of backup boot sector (2) */ +#define BS_DrvNum32 64 /* Physical drive number (2) */ +#define BS_BootSig32 66 /* Extended boot signature (1) */ +#define BS_VolID32 67 /* Volume serial number (4) */ +#define BS_VolLab32 71 /* Volume label (8) */ +#define BS_FilSysType32 82 /* File system type (1) */ +#define FSI_LeadSig 0 /* FSI: Leading signature (4) */ +#define FSI_StrucSig 484 /* FSI: Structure signature (4) */ +#define FSI_Free_Count 488 /* FSI: Number of free clusters (4) */ +#define FSI_Nxt_Free 492 /* FSI: Last allocated cluster (4) */ +#define MBR_Table 446 /* MBR: Partition table offset (2) */ +#define SZ_PTE 16 /* MBR: Size of a partition table entry */ +#define BS_55AA 510 /* Boot sector signature (2) */ + +#define DIR_Name 0 /* Short file name (11) */ +#define DIR_Attr 11 /* Attribute (1) */ +#define DIR_NTres 12 /* NT flag (1) */ +#define DIR_CrtTimeTenth 13 /* Created time sub-second (1) */ +#define DIR_CrtTime 14 /* Created time (2) */ +#define DIR_CrtDate 16 /* Created date (2) */ +#define DIR_LstAccDate 18 /* Last accessed date (2) */ +#define DIR_FstClusHI 20 /* Higher 16-bit of first cluster (2) */ +#define DIR_WrtTime 22 /* Modified time (2) */ +#define DIR_WrtDate 24 /* Modified date (2) */ +#define DIR_FstClusLO 26 /* Lower 16-bit of first cluster (2) */ +#define DIR_FileSize 28 /* File size (4) */ +#define LDIR_Ord 0 /* LFN entry order and LLE flag (1) */ +#define LDIR_Attr 11 /* LFN attribute (1) */ +#define LDIR_Type 12 /* LFN type (1) */ +#define LDIR_Chksum 13 /* Sum of corresponding SFN entry */ +#define LDIR_FstClusLO 26 /* Filled by zero (0) */ +#define SZ_DIR 32 /* Size of a directory entry */ +#define LLE 0x40 /* Last long entry flag in LDIR_Ord */ +#define DDE 0xE5 /* Deleted directory entry mark in DIR_Name[0] */ +#define NDDE 0x05 /* Replacement of the character collides with DDE */ + + +/*------------------------------------------------------------*/ +/* Module private work area */ +/*------------------------------------------------------------*/ +/* Note that uninitialized variables with static duration are +/ zeroed/nulled at start-up. If not, the compiler or start-up +/ routine is out of ANSI-C standard. +*/ + +#if _VOLUMES +static +FATFS *FatFs[_VOLUMES]; /* Pointer to the file system objects (logical drives) */ +#else +#error Number of volumes must not be 0. +#endif + +static +WORD Fsid; /* File system mount ID */ + +#if _FS_RPATH +static +BYTE CurrVol; /* Current drive */ +#endif + +#if _FS_LOCK +static +FILESEM Files[_FS_LOCK]; /* File lock semaphores */ +#endif + +#if _USE_LFN == 0 /* No LFN feature */ +#define DEF_NAMEBUF BYTE sfn[12] +#define INIT_BUF(dobj) (dobj).fn = sfn +#define FREE_BUF() + +#elif _USE_LFN == 1 /* LFN feature with static working buffer */ +static WCHAR LfnBuf[_MAX_LFN+1]; +#define DEF_NAMEBUF BYTE sfn[12] +#define INIT_BUF(dobj) { (dobj).fn = sfn; (dobj).lfn = LfnBuf; } +#define FREE_BUF() + +#elif _USE_LFN == 2 /* LFN feature with dynamic working buffer on the stack */ +#define DEF_NAMEBUF BYTE sfn[12]; WCHAR lbuf[_MAX_LFN+1] +#define INIT_BUF(dobj) { (dobj).fn = sfn; (dobj).lfn = lbuf; } +#define FREE_BUF() + +#elif _USE_LFN == 3 /* LFN feature with dynamic working buffer on the heap */ +#define DEF_NAMEBUF BYTE sfn[12]; WCHAR *lfn +#define INIT_BUF(dobj) { lfn = ff_memalloc((_MAX_LFN + 1) * 2); \ + if (!lfn) LEAVE_FF((dobj).fs, FR_NOT_ENOUGH_CORE); \ + (dobj).lfn = lfn; (dobj).fn = sfn; } +#define FREE_BUF() ff_memfree(lfn) + +#else +#error Wrong LFN configuration. +#endif + + + + +/*-------------------------------------------------------------------------- + + Module Private Functions + +---------------------------------------------------------------------------*/ + + +/*-----------------------------------------------------------------------*/ +/* String functions */ +/*-----------------------------------------------------------------------*/ + +/* Copy memory to memory */ +static +void mem_cpy (void* dst, const void* src, UINT cnt) { + BYTE *d = (BYTE*)dst; + const BYTE *s = (const BYTE*)src; + +#if _WORD_ACCESS == 1 + while (cnt >= sizeof (int)) { + *(int*)d = *(int*)s; + d += sizeof (int); s += sizeof (int); + cnt -= sizeof (int); + } +#endif + while (cnt--) + *d++ = *s++; +} + +/* Fill memory */ +static +void mem_set (void* dst, int val, UINT cnt) { + BYTE *d = (BYTE*)dst; + + while (cnt--) + *d++ = (BYTE)val; +} + +/* Compare memory to memory */ +static +int mem_cmp (const void* dst, const void* src, UINT cnt) { + const BYTE *d = (const BYTE *)dst, *s = (const BYTE *)src; + int r = 0; + + while (cnt-- && (r = *d++ - *s++) == 0) ; + return r; +} + +/* Check if chr is contained in the string */ +static +int chk_chr (const char* str, int chr) { + while (*str && *str != chr) str++; + return *str; +} + + + +/*-----------------------------------------------------------------------*/ +/* Request/Release grant to access the volume */ +/*-----------------------------------------------------------------------*/ +#if _FS_REENTRANT + +static +int lock_fs ( + FATFS *fs /* File system object */ +) +{ + return ff_req_grant(fs->sobj); +} + + +static +void unlock_fs ( + FATFS *fs, /* File system object */ + FRESULT res /* Result code to be returned */ +) +{ + if (fs && + res != FR_NOT_ENABLED && + res != FR_INVALID_DRIVE && + res != FR_INVALID_OBJECT && + res != FR_TIMEOUT) { + ff_rel_grant(fs->sobj); + } +} +#endif + + + +/*-----------------------------------------------------------------------*/ +/* File lock control functions */ +/*-----------------------------------------------------------------------*/ +#if _FS_LOCK + +static +FRESULT chk_lock ( /* Check if the file can be accessed */ + DIR* dj, /* Directory object pointing the file to be checked */ + int acc /* Desired access (0:Read, 1:Write, 2:Delete/Rename) */ +) +{ + UINT i, be; + + /* Search file semaphore table */ + for (i = be = 0; i < _FS_LOCK; i++) { + if (Files[i].fs) { /* Existing entry */ + if (Files[i].fs == dj->fs && /* Check if the file matched with an open file */ + Files[i].clu == dj->sclust && + Files[i].idx == dj->index) break; + } else { /* Blank entry */ + be++; + } + } + if (i == _FS_LOCK) /* The file is not opened */ + return (be || acc == 2) ? FR_OK : FR_TOO_MANY_OPEN_FILES; /* Is there a blank entry for new file? */ + + /* The file has been opened. Reject any open against writing file and all write mode open */ + return (acc || Files[i].ctr == 0x100) ? FR_LOCKED : FR_OK; +} + + +static +int enq_lock (void) /* Check if an entry is available for a new file */ +{ + UINT i; + + for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; + return (i == _FS_LOCK) ? 0 : 1; +} + + +static +UINT inc_lock ( /* Increment file open counter and returns its index (0:int error) */ + DIR* dj, /* Directory object pointing the file to register or increment */ + int acc /* Desired access mode (0:Read, !0:Write) */ +) +{ + UINT i; + + + for (i = 0; i < _FS_LOCK; i++) { /* Find the file */ + if (Files[i].fs == dj->fs && + Files[i].clu == dj->sclust && + Files[i].idx == dj->index) break; + } + + if (i == _FS_LOCK) { /* Not opened. Register it as new. */ + for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; + if (i == _FS_LOCK) return 0; /* No space to register (int err) */ + Files[i].fs = dj->fs; + Files[i].clu = dj->sclust; + Files[i].idx = dj->index; + Files[i].ctr = 0; + } + + if (acc && Files[i].ctr) return 0; /* Access violation (int err) */ + + Files[i].ctr = acc ? 0x100 : Files[i].ctr + 1; /* Set semaphore value */ + + return i + 1; +} + + +static +FRESULT dec_lock ( /* Decrement file open counter */ + UINT i /* Semaphore index */ +) +{ + WORD n; + FRESULT res; + + + if (--i < _FS_LOCK) { + n = Files[i].ctr; + if (n == 0x100) n = 0; + if (n) n--; + Files[i].ctr = n; + if (!n) Files[i].fs = 0; + res = FR_OK; + } else { + res = FR_INT_ERR; + } + return res; +} + + +static +void clear_lock ( /* Clear lock entries of the volume */ + FATFS *fs +) +{ + UINT i; + + for (i = 0; i < _FS_LOCK; i++) { + if (Files[i].fs == fs) Files[i].fs = 0; + } +} +#endif + + + +/*-----------------------------------------------------------------------*/ +/* Change window offset */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT move_window ( + FATFS *fs, /* File system object */ + DWORD sector /* Sector number to make appearance in the fs->win[] */ +) /* Move to zero only writes back dirty window */ +{ + DWORD wsect; + + + wsect = fs->winsect; + if (wsect != sector) { /* Changed current window */ +#if !_FS_READONLY + if (fs->wflag) { /* Write back dirty window if needed */ + if (disk_write(fs->drv, fs->win, wsect, 1) != RES_OK) + return FR_DISK_ERR; + fs->wflag = 0; + if (wsect < (fs->fatbase + fs->fsize)) { /* In FAT area */ + BYTE nf; + for (nf = fs->n_fats; nf > 1; nf--) { /* Reflect the change to all FAT copies */ + wsect += fs->fsize; + disk_write(fs->drv, fs->win, wsect, 1); + } + } + } +#endif + if (sector) { + if (disk_read(fs->drv, fs->win, sector, 1) != RES_OK) + return FR_DISK_ERR; + fs->winsect = sector; + } + } + + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Clean-up cached data */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY +static +FRESULT sync ( /* FR_OK: successful, FR_DISK_ERR: failed */ + FATFS *fs /* File system object */ +) +{ + FRESULT res; + + + res = move_window(fs, 0); + if (res == FR_OK) { + /* Update FSInfo sector if needed */ + if (fs->fs_type == FS_FAT32 && fs->fsi_flag) { + fs->winsect = 0; + /* Create FSInfo structure */ + mem_set(fs->win, 0, 512); + ST_WORD(fs->win+BS_55AA, 0xAA55); + ST_DWORD(fs->win+FSI_LeadSig, 0x41615252); + ST_DWORD(fs->win+FSI_StrucSig, 0x61417272); + ST_DWORD(fs->win+FSI_Free_Count, fs->free_clust); + ST_DWORD(fs->win+FSI_Nxt_Free, fs->last_clust); + /* Write it into the FSInfo sector */ + disk_write(fs->drv, fs->win, fs->fsi_sector, 1); + fs->fsi_flag = 0; + } + /* Make sure that no pending write process in the physical drive */ + if (disk_ioctl(fs->drv, CTRL_SYNC, 0) != RES_OK) + res = FR_DISK_ERR; + } + + return res; +} +#endif + + + + +/*-----------------------------------------------------------------------*/ +/* Get sector# from cluster# */ +/*-----------------------------------------------------------------------*/ + + +DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */ + FATFS *fs, /* File system object */ + DWORD clst /* Cluster# to be converted */ +) +{ + clst -= 2; + if (clst >= (fs->n_fatent - 2)) return 0; /* Invalid cluster# */ + return clst * fs->csize + fs->database; +} + + + + +/*-----------------------------------------------------------------------*/ +/* FAT access - Read value of a FAT entry */ +/*-----------------------------------------------------------------------*/ + + +DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, Else:Cluster status */ + FATFS *fs, /* File system object */ + DWORD clst /* Cluster# to get the link information */ +) +{ + UINT wc, bc; + BYTE *p; + + + if (clst < 2 || clst >= fs->n_fatent) /* Check range */ + return 1; + + switch (fs->fs_type) { + case FS_FAT12 : + bc = (UINT)clst; bc += bc / 2; + if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break; + wc = fs->win[bc % SS(fs)]; bc++; + if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break; + wc |= fs->win[bc % SS(fs)] << 8; + return (clst & 1) ? (wc >> 4) : (wc & 0xFFF); + + case FS_FAT16 : + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2)))) break; + p = &fs->win[clst * 2 % SS(fs)]; + return LD_WORD(p); + + case FS_FAT32 : + if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4)))) break; + p = &fs->win[clst * 4 % SS(fs)]; + return LD_DWORD(p) & 0x0FFFFFFF; + } + + return 0xFFFFFFFF; /* An error occurred at the disk I/O layer */ +} + + + + +/*-----------------------------------------------------------------------*/ +/* FAT access - Change value of a FAT entry */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY + +FRESULT put_fat ( + FATFS *fs, /* File system object */ + DWORD clst, /* Cluster# to be changed in range of 2 to fs->n_fatent - 1 */ + DWORD val /* New value to mark the cluster */ +) +{ + UINT bc; + BYTE *p; + FRESULT res; + + + if (clst < 2 || clst >= fs->n_fatent) { /* Check range */ + res = FR_INT_ERR; + + } else { + switch (fs->fs_type) { + case FS_FAT12 : + bc = (UINT)clst; bc += bc / 2; + res = move_window(fs, fs->fatbase + (bc / SS(fs))); + if (res != FR_OK) break; + p = &fs->win[bc % SS(fs)]; + *p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val; + bc++; + fs->wflag = 1; + res = move_window(fs, fs->fatbase + (bc / SS(fs))); + if (res != FR_OK) break; + p = &fs->win[bc % SS(fs)]; + *p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F)); + break; + + case FS_FAT16 : + res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))); + if (res != FR_OK) break; + p = &fs->win[clst * 2 % SS(fs)]; + ST_WORD(p, (WORD)val); + break; + + case FS_FAT32 : + res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))); + if (res != FR_OK) break; + p = &fs->win[clst * 4 % SS(fs)]; + val |= LD_DWORD(p) & 0xF0000000; + ST_DWORD(p, val); + break; + + default : + res = FR_INT_ERR; + } + fs->wflag = 1; + } + + return res; +} +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* FAT handling - Remove a cluster chain */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY +static +FRESULT remove_chain ( + FATFS *fs, /* File system object */ + DWORD clst /* Cluster# to remove a chain from */ +) +{ + FRESULT res; + DWORD nxt; +#if _USE_ERASE + DWORD scl = clst, ecl = clst, rt[2]; +#endif + + if (clst < 2 || clst >= fs->n_fatent) { /* Check range */ + res = FR_INT_ERR; + + } else { + res = FR_OK; + while (clst < fs->n_fatent) { /* Not a last link? */ + nxt = get_fat(fs, clst); /* Get cluster status */ + if (nxt == 0) break; /* Empty cluster? */ + if (nxt == 1) { res = FR_INT_ERR; break; } /* Internal error? */ + if (nxt == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } /* Disk error? */ + res = put_fat(fs, clst, 0); /* Mark the cluster "empty" */ + if (res != FR_OK) break; + if (fs->free_clust != 0xFFFFFFFF) { /* Update FSInfo */ + fs->free_clust++; + fs->fsi_flag = 1; + } +#if _USE_ERASE + if (ecl + 1 == nxt) { /* Is next cluster contiguous? */ + ecl = nxt; + } else { /* End of contiguous clusters */ + rt[0] = clust2sect(fs, scl); /* Start sector */ + rt[1] = clust2sect(fs, ecl) + fs->csize - 1; /* End sector */ + disk_ioctl(fs->drv, CTRL_ERASE_SECTOR, rt); /* Erase the block */ + scl = ecl = nxt; + } +#endif + clst = nxt; /* Next cluster */ + } + } + + return res; +} +#endif + + + + +/*-----------------------------------------------------------------------*/ +/* FAT handling - Stretch or Create a cluster chain */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY +static +DWORD create_chain ( /* 0:No free cluster, 1:Internal error, 0xFFFFFFFF:Disk error, >=2:New cluster# */ + FATFS *fs, /* File system object */ + DWORD clst /* Cluster# to stretch. 0 means create a new chain. */ +) +{ + DWORD cs, ncl, scl; + FRESULT res; + + + if (clst == 0) { /* Create a new chain */ + scl = fs->last_clust; /* Get suggested start point */ + if (!scl || scl >= fs->n_fatent) scl = 1; + } + else { /* Stretch the current chain */ + cs = get_fat(fs, clst); /* Check the cluster status */ + if (cs < 2) return 1; /* It is an invalid cluster */ + if (cs < fs->n_fatent) return cs; /* It is already followed by next cluster */ + scl = clst; + } + + ncl = scl; /* Start cluster */ + for (;;) { + ncl++; /* Next cluster */ + if (ncl >= fs->n_fatent) { /* Wrap around */ + ncl = 2; + if (ncl > scl) return 0; /* No free cluster */ + } + cs = get_fat(fs, ncl); /* Get the cluster status */ + if (cs == 0) break; /* Found a free cluster */ + if (cs == 0xFFFFFFFF || cs == 1)/* An error occurred */ + return cs; + if (ncl == scl) return 0; /* No free cluster */ + } + + res = put_fat(fs, ncl, 0x0FFFFFFF); /* Mark the new cluster "last link" */ + if (res == FR_OK && clst != 0) { + res = put_fat(fs, clst, ncl); /* Link it to the previous one if needed */ + } + if (res == FR_OK) { + fs->last_clust = ncl; /* Update FSINFO */ + if (fs->free_clust != 0xFFFFFFFF) { + fs->free_clust--; + fs->fsi_flag = 1; + } + } else { + ncl = (res == FR_DISK_ERR) ? 0xFFFFFFFF : 1; + } + + return ncl; /* Return new cluster number or error code */ +} +#endif /* !_FS_READONLY */ + + + +/*-----------------------------------------------------------------------*/ +/* FAT handling - Convert offset into cluster with link map table */ +/*-----------------------------------------------------------------------*/ + +#if _USE_FASTSEEK +static +DWORD clmt_clust ( /* <2:Error, >=2:Cluster number */ + FIL* fp, /* Pointer to the file object */ + DWORD ofs /* File offset to be converted to cluster# */ +) +{ + DWORD cl, ncl, *tbl; + + + tbl = fp->cltbl + 1; /* Top of CLMT */ + cl = ofs / SS(fp->fs) / fp->fs->csize; /* Cluster order from top of the file */ + for (;;) { + ncl = *tbl++; /* Number of cluters in the fragment */ + if (!ncl) return 0; /* End of table? (error) */ + if (cl < ncl) break; /* In this fragment? */ + cl -= ncl; tbl++; /* Next fragment */ + } + return cl + *tbl; /* Return the cluster number */ +} +#endif /* _USE_FASTSEEK */ + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Set directory index */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_sdi ( + DIR *dj, /* Pointer to directory object */ + WORD idx /* Index of directory table */ +) +{ + DWORD clst; + WORD ic; + + + dj->index = idx; + clst = dj->sclust; + if (clst == 1 || clst >= dj->fs->n_fatent) /* Check start cluster range */ + return FR_INT_ERR; + if (!clst && dj->fs->fs_type == FS_FAT32) /* Replace cluster# 0 with root cluster# if in FAT32 */ + clst = dj->fs->dirbase; + + if (clst == 0) { /* Static table (root-dir in FAT12/16) */ + dj->clust = clst; + if (idx >= dj->fs->n_rootdir) /* Index is out of range */ + return FR_INT_ERR; + dj->sect = dj->fs->dirbase + idx / (SS(dj->fs) / SZ_DIR); /* Sector# */ + } + else { /* Dynamic table (sub-dirs or root-dir in FAT32) */ + ic = SS(dj->fs) / SZ_DIR * dj->fs->csize; /* Entries per cluster */ + while (idx >= ic) { /* Follow cluster chain */ + clst = get_fat(dj->fs, clst); /* Get next cluster */ + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ + if (clst < 2 || clst >= dj->fs->n_fatent) /* Reached to end of table or int error */ + return FR_INT_ERR; + idx -= ic; + } + dj->clust = clst; + dj->sect = clust2sect(dj->fs, clst) + idx / (SS(dj->fs) / SZ_DIR); /* Sector# */ + } + + dj->dir = dj->fs->win + (idx % (SS(dj->fs) / SZ_DIR)) * SZ_DIR; /* Ptr to the entry in the sector */ + + return FR_OK; /* Seek succeeded */ +} + + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Move directory table index next */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_next ( /* FR_OK:Succeeded, FR_NO_FILE:End of table, FR_DENIED:EOT and could not stretch */ + DIR *dj, /* Pointer to directory object */ + int stretch /* 0: Do not stretch table, 1: Stretch table if needed */ +) +{ + DWORD clst; + WORD i; + + + stretch = stretch; /* To suppress warning on read-only cfg. */ + i = dj->index + 1; + if (!i || !dj->sect) /* Report EOT when index has reached 65535 */ + return FR_NO_FILE; + + if (!(i % (SS(dj->fs) / SZ_DIR))) { /* Sector changed? */ + dj->sect++; /* Next sector */ + + if (dj->clust == 0) { /* Static table */ + if (i >= dj->fs->n_rootdir) /* Report EOT when end of table */ + return FR_NO_FILE; + } + else { /* Dynamic table */ + if (((i / (SS(dj->fs) / SZ_DIR)) & (dj->fs->csize - 1)) == 0) { /* Cluster changed? */ + clst = get_fat(dj->fs, dj->clust); /* Get next cluster */ + if (clst <= 1) return FR_INT_ERR; + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; + if (clst >= dj->fs->n_fatent) { /* When it reached end of dynamic table */ +#if !_FS_READONLY + BYTE c; + if (!stretch) return FR_NO_FILE; /* When do not stretch, report EOT */ + clst = create_chain(dj->fs, dj->clust); /* Stretch cluster chain */ + if (clst == 0) return FR_DENIED; /* No free cluster */ + if (clst == 1) return FR_INT_ERR; + if (clst == 0xFFFFFFFF) return FR_DISK_ERR; + /* Clean-up stretched table */ + if (move_window(dj->fs, 0)) return FR_DISK_ERR; /* Flush active window */ + mem_set(dj->fs->win, 0, SS(dj->fs)); /* Clear window buffer */ + dj->fs->winsect = clust2sect(dj->fs, clst); /* Cluster start sector */ + for (c = 0; c < dj->fs->csize; c++) { /* Fill the new cluster with 0 */ + dj->fs->wflag = 1; + if (move_window(dj->fs, 0)) return FR_DISK_ERR; + dj->fs->winsect++; + } + dj->fs->winsect -= c; /* Rewind window address */ +#else + return FR_NO_FILE; /* Report EOT */ +#endif + } + dj->clust = clst; /* Initialize data for new cluster */ + dj->sect = clust2sect(dj->fs, clst); + } + } + } + + dj->index = i; + dj->dir = dj->fs->win + (i % (SS(dj->fs) / SZ_DIR)) * SZ_DIR; + + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Load/Store start cluster number */ +/*-----------------------------------------------------------------------*/ + +static +DWORD ld_clust ( + FATFS *fs, /* Pointer to the fs object */ + BYTE *dir /* Pointer to the directory entry */ +) +{ + DWORD cl; + + cl = LD_WORD(dir+DIR_FstClusLO); + if (fs->fs_type == FS_FAT32) + cl |= (DWORD)LD_WORD(dir+DIR_FstClusHI) << 16; + + return cl; +} + + +#if !_FS_READONLY +static +void st_clust ( + BYTE *dir, /* Pointer to the directory entry */ + DWORD cl /* Value to be set */ +) +{ + ST_WORD(dir+DIR_FstClusLO, cl); + ST_WORD(dir+DIR_FstClusHI, cl >> 16); +} +#endif + + + +/*-----------------------------------------------------------------------*/ +/* LFN handling - Test/Pick/Fit an LFN segment from/to directory entry */ +/*-----------------------------------------------------------------------*/ +#if _USE_LFN +static +const BYTE LfnOfs[] = {1,3,5,7,9,14,16,18,20,22,24,28,30}; /* Offset of LFN chars in the directory entry */ + + +static +int cmp_lfn ( /* 1:Matched, 0:Not matched */ + WCHAR *lfnbuf, /* Pointer to the LFN to be compared */ + BYTE *dir /* Pointer to the directory entry containing a part of LFN */ +) +{ + UINT i, s; + WCHAR wc, uc; + + + i = ((dir[LDIR_Ord] & ~LLE) - 1) * 13; /* Get offset in the LFN buffer */ + s = 0; wc = 1; + do { + uc = LD_WORD(dir+LfnOfs[s]); /* Pick an LFN character from the entry */ + if (wc) { /* Last char has not been processed */ + wc = ff_wtoupper(uc); /* Convert it to upper case */ + if (i >= _MAX_LFN || wc != ff_wtoupper(lfnbuf[i++])) /* Compare it */ + return 0; /* Not matched */ + } else { + if (uc != 0xFFFF) return 0; /* Check filler */ + } + } while (++s < 13); /* Repeat until all chars in the entry are checked */ + + if ((dir[LDIR_Ord] & LLE) && wc && lfnbuf[i]) /* Last segment matched but different length */ + return 0; + + return 1; /* The part of LFN matched */ +} + + + +static +int pick_lfn ( /* 1:Succeeded, 0:Buffer overflow */ + WCHAR *lfnbuf, /* Pointer to the Unicode-LFN buffer */ + BYTE *dir /* Pointer to the directory entry */ +) +{ + UINT i, s; + WCHAR wc, uc; + + + i = ((dir[LDIR_Ord] & 0x3F) - 1) * 13; /* Offset in the LFN buffer */ + + s = 0; wc = 1; + do { + uc = LD_WORD(dir+LfnOfs[s]); /* Pick an LFN character from the entry */ + if (wc) { /* Last char has not been processed */ + if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ + lfnbuf[i++] = wc = uc; /* Store it */ + } else { + if (uc != 0xFFFF) return 0; /* Check filler */ + } + } while (++s < 13); /* Read all character in the entry */ + + if (dir[LDIR_Ord] & LLE) { /* Put terminator if it is the last LFN part */ + if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ + lfnbuf[i] = 0; + } + + return 1; +} + + +#if !_FS_READONLY +static +void fit_lfn ( + const WCHAR *lfnbuf, /* Pointer to the LFN buffer */ + BYTE *dir, /* Pointer to the directory entry */ + BYTE ord, /* LFN order (1-20) */ + BYTE sum /* SFN sum */ +) +{ + UINT i, s; + WCHAR wc; + + + dir[LDIR_Chksum] = sum; /* Set check sum */ + dir[LDIR_Attr] = AM_LFN; /* Set attribute. LFN entry */ + dir[LDIR_Type] = 0; + ST_WORD(dir+LDIR_FstClusLO, 0); + + i = (ord - 1) * 13; /* Get offset in the LFN buffer */ + s = wc = 0; + do { + if (wc != 0xFFFF) wc = lfnbuf[i++]; /* Get an effective char */ + ST_WORD(dir+LfnOfs[s], wc); /* Put it */ + if (!wc) wc = 0xFFFF; /* Padding chars following last char */ + } while (++s < 13); + if (wc == 0xFFFF || !lfnbuf[i]) ord |= LLE; /* Bottom LFN part is the start of LFN sequence */ + dir[LDIR_Ord] = ord; /* Set the LFN order */ +} + +#endif +#endif + + + +/*-----------------------------------------------------------------------*/ +/* Create numbered name */ +/*-----------------------------------------------------------------------*/ +#if _USE_LFN +void gen_numname ( + BYTE *dst, /* Pointer to generated SFN */ + const BYTE *src, /* Pointer to source SFN to be modified */ + const WCHAR *lfn, /* Pointer to LFN */ + WORD seq /* Sequence number */ +) +{ + BYTE ns[8], c; + UINT i, j; + + + mem_cpy(dst, src, 11); + + if (seq > 5) { /* On many collisions, generate a hash number instead of sequential number */ + do seq = (seq >> 1) + (seq << 15) + (WORD)*lfn++; while (*lfn); + } + + /* itoa (hexdecimal) */ + i = 7; + do { + c = (seq % 16) + '0'; + if (c > '9') c += 7; + ns[i--] = c; + seq /= 16; + } while (seq); + ns[i] = '~'; + + /* Append the number */ + for (j = 0; j < i && dst[j] != ' '; j++) { + if (IsDBCS1(dst[j])) { + if (j == i - 1) break; + j++; + } + } + do { + dst[j++] = (i < 8) ? ns[i++] : ' '; + } while (j < 8); +} +#endif + + + + +/*-----------------------------------------------------------------------*/ +/* Calculate sum of an SFN */ +/*-----------------------------------------------------------------------*/ +#if _USE_LFN +static +BYTE sum_sfn ( + const BYTE *dir /* Ptr to directory entry */ +) +{ + BYTE sum = 0; + UINT n = 11; + + do sum = (sum >> 1) + (sum << 7) + *dir++; while (--n); + return sum; +} +#endif + + + + +/*-----------------------------------------------------------------------*/ +/* Directory handling - Find an object in the directory */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT dir_find ( + DIR *dj /* Pointer to the directory object linked to the file name */ +) +{ + FRESULT res; + BYTE c, *dir; +#if _USE_LFN + BYTE a, ord, sum; +#endif + + res = dir_sdi(dj, 0); /* Rewind directory object */ + if (res != FR_OK) return res; + +#if _USE_LFN + ord = sum = 0xFF; +#endif + do { + res = move_window(dj->fs, dj->sect); + if (res != FR_OK) break; + dir = dj->dir; /* Ptr to the directory entry of current index */ + c = dir[DIR_Name]; + if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ +#if _USE_LFN /* LFN configuration */ + a = dir[DIR_Attr] & AM_MASK; + if (c == DDE || ((a & AM_VOL) && a != AM_LFN)) { /* An entry without valid data */ + ord = 0xFF; + } else { + if (a == AM_LFN) { /* An LFN entry is found */ + if (dj->lfn) { + if (c & LLE) { /* Is it start of LFN sequence? */ + sum = dir[LDIR_Chksum]; + c &= ~LLE; ord = c; /* LFN start order */ + dj->lfn_idx = dj->index; + } + /* Check validity of the LFN entry and compare it with given name */ + ord = (c == ord && sum == dir[LDIR_Chksum] && cmp_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF; + } + } else { /* An SFN entry is found */ + if (!ord && sum == sum_sfn(dir)) break; /* LFN matched? */ + ord = 0xFF; dj->lfn_idx = 0xFFFF; /* Reset LFN sequence */ + if (!(dj->fn[NS] & NS_LOSS) && !mem_cmp(dir, dj->fn, 11)) break; /* SFN matched? */ + } + } +#else /* Non LFN configuration */ + if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dj->fn, 11)) /* Is it a valid entry? */ + break; +#endif + res = dir_next(dj, 0); /* Next entry */ + } while (res == FR_OK); + + return res; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Read an object from the directory */ +/*-----------------------------------------------------------------------*/ +#if _FS_MINIMIZE <= 1 +static +FRESULT dir_read ( + DIR *dj /* Pointer to the directory object that pointing the entry to be read */ +) +{ + FRESULT res; + BYTE c, *dir; +#if _USE_LFN + BYTE a, ord = 0xFF, sum = 0xFF; +#endif + + res = FR_NO_FILE; + while (dj->sect) { + res = move_window(dj->fs, dj->sect); + if (res != FR_OK) break; + dir = dj->dir; /* Ptr to the directory entry of current index */ + c = dir[DIR_Name]; + if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ +#if _USE_LFN /* LFN configuration */ + a = dir[DIR_Attr] & AM_MASK; + if (c == DDE || (!_FS_RPATH && c == '.') || ((a & AM_VOL) && a != AM_LFN)) { /* An entry without valid data */ + ord = 0xFF; + } else { + if (a == AM_LFN) { /* An LFN entry is found */ + if (c & LLE) { /* Is it start of LFN sequence? */ + sum = dir[LDIR_Chksum]; + c &= ~LLE; ord = c; + dj->lfn_idx = dj->index; + } + /* Check LFN validity and capture it */ + ord = (c == ord && sum == dir[LDIR_Chksum] && pick_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF; + } else { /* An SFN entry is found */ + if (ord || sum != sum_sfn(dir)) /* Is there a valid LFN? */ + dj->lfn_idx = 0xFFFF; /* It has no LFN. */ + break; + } + } +#else /* Non LFN configuration */ + if (c != DDE && (_FS_RPATH || c != '.') && !(dir[DIR_Attr] & AM_VOL)) /* Is it a valid entry? */ + break; +#endif + res = dir_next(dj, 0); /* Next entry */ + if (res != FR_OK) break; + } + + if (res != FR_OK) dj->sect = 0; + + return res; +} +#endif + + + +/*-----------------------------------------------------------------------*/ +/* Register an object to the directory */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY +static +FRESULT dir_register ( /* FR_OK:Successful, FR_DENIED:No free entry or too many SFN collision, FR_DISK_ERR:Disk error */ + DIR *dj /* Target directory with object name to be created */ +) +{ + FRESULT res; + BYTE c, *dir; +#if _USE_LFN /* LFN configuration */ + WORD n, ne, is; + BYTE sn[12], *fn, sum; + WCHAR *lfn; + + + fn = dj->fn; lfn = dj->lfn; + mem_cpy(sn, fn, 12); + + if (_FS_RPATH && (sn[NS] & NS_DOT)) /* Cannot create dot entry */ + return FR_INVALID_NAME; + + if (sn[NS] & NS_LOSS) { /* When LFN is out of 8.3 format, generate a numbered name */ + fn[NS] = 0; dj->lfn = 0; /* Find only SFN */ + for (n = 1; n < 100; n++) { + gen_numname(fn, sn, lfn, n); /* Generate a numbered name */ + res = dir_find(dj); /* Check if the name collides with existing SFN */ + if (res != FR_OK) break; + } + if (n == 100) return FR_DENIED; /* Abort if too many collisions */ + if (res != FR_NO_FILE) return res; /* Abort if the result is other than 'not collided' */ + fn[NS] = sn[NS]; dj->lfn = lfn; + } + + if (sn[NS] & NS_LFN) { /* When LFN is to be created, reserve an SFN + LFN entries. */ + for (ne = 0; lfn[ne]; ne++) ; + ne = (ne + 25) / 13; + } else { /* Otherwise reserve only an SFN entry. */ + ne = 1; + } + + /* Reserve contiguous entries */ + res = dir_sdi(dj, 0); + if (res != FR_OK) return res; + n = is = 0; + do { + res = move_window(dj->fs, dj->sect); + if (res != FR_OK) break; + c = *dj->dir; /* Check the entry status */ + if (c == DDE || c == 0) { /* Is it a blank entry? */ + if (n == 0) is = dj->index; /* First index of the contiguous entry */ + if (++n == ne) break; /* A contiguous entry that required count is found */ + } else { + n = 0; /* Not a blank entry. Restart to search */ + } + res = dir_next(dj, 1); /* Next entry with table stretch */ + } while (res == FR_OK); + + if (res == FR_OK && ne > 1) { /* Initialize LFN entry if needed */ + res = dir_sdi(dj, is); + if (res == FR_OK) { + sum = sum_sfn(dj->fn); /* Sum of the SFN tied to the LFN */ + ne--; + do { /* Store LFN entries in bottom first */ + res = move_window(dj->fs, dj->sect); + if (res != FR_OK) break; + fit_lfn(dj->lfn, dj->dir, (BYTE)ne, sum); + dj->fs->wflag = 1; + res = dir_next(dj, 0); /* Next entry */ + } while (res == FR_OK && --ne); + } + } + +#else /* Non LFN configuration */ + res = dir_sdi(dj, 0); + if (res == FR_OK) { + do { /* Find a blank entry for the SFN */ + res = move_window(dj->fs, dj->sect); + if (res != FR_OK) break; + c = *dj->dir; + if (c == DDE || c == 0) break; /* Is it a blank entry? */ + res = dir_next(dj, 1); /* Next entry with table stretch */ + } while (res == FR_OK); + } +#endif + + if (res == FR_OK) { /* Initialize the SFN entry */ + res = move_window(dj->fs, dj->sect); + if (res == FR_OK) { + dir = dj->dir; + mem_set(dir, 0, SZ_DIR); /* Clean the entry */ + mem_cpy(dir, dj->fn, 11); /* Put SFN */ +#if _USE_LFN + dir[DIR_NTres] = *(dj->fn+NS) & (NS_BODY | NS_EXT); /* Put NT flag */ +#endif + dj->fs->wflag = 1; + } + } + + return res; +} +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* Remove an object from the directory */ +/*-----------------------------------------------------------------------*/ +#if !_FS_READONLY && !_FS_MINIMIZE +static +FRESULT dir_remove ( /* FR_OK: Successful, FR_DISK_ERR: A disk error */ + DIR *dj /* Directory object pointing the entry to be removed */ +) +{ + FRESULT res; +#if _USE_LFN /* LFN configuration */ + WORD i; + + i = dj->index; /* SFN index */ + res = dir_sdi(dj, (WORD)((dj->lfn_idx == 0xFFFF) ? i : dj->lfn_idx)); /* Goto the SFN or top of the LFN entries */ + if (res == FR_OK) { + do { + res = move_window(dj->fs, dj->sect); + if (res != FR_OK) break; + *dj->dir = DDE; /* Mark the entry "deleted" */ + dj->fs->wflag = 1; + if (dj->index >= i) break; /* When reached SFN, all entries of the object has been deleted. */ + res = dir_next(dj, 0); /* Next entry */ + } while (res == FR_OK); + if (res == FR_NO_FILE) res = FR_INT_ERR; + } + +#else /* Non LFN configuration */ + res = dir_sdi(dj, dj->index); + if (res == FR_OK) { + res = move_window(dj->fs, dj->sect); + if (res == FR_OK) { + *dj->dir = DDE; /* Mark the entry "deleted" */ + dj->fs->wflag = 1; + } + } +#endif + + return res; +} +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* Pick a segment and create the object name in directory form */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT create_name ( + DIR *dj, /* Pointer to the directory object */ + const TCHAR **path /* Pointer to pointer to the segment in the path string */ +) +{ +#ifdef _EXCVT + static const BYTE excvt[] = _EXCVT; /* Upper conversion table for extended chars */ +#endif + +#if _USE_LFN /* LFN configuration */ + BYTE b, cf; + WCHAR w, *lfn; + UINT i, ni, si, di; + const TCHAR *p; + + /* Create LFN in Unicode */ + for (p = *path; *p == '/' || *p == '\\'; p++) ; /* Strip duplicated separator */ + lfn = dj->lfn; + si = di = 0; + for (;;) { + w = p[si++]; /* Get a character */ + if (w < ' ' || w == '/' || w == '\\') break; /* Break on end of segment */ + if (di >= _MAX_LFN) /* Reject too long name */ + return FR_INVALID_NAME; +#if !_LFN_UNICODE + w &= 0xFF; + if (IsDBCS1(w)) { /* Check if it is a DBC 1st byte (always false on SBCS cfg) */ + b = (BYTE)p[si++]; /* Get 2nd byte */ + if (!IsDBCS2(b)) + return FR_INVALID_NAME; /* Reject invalid sequence */ + w = (w << 8) + b; /* Create a DBC */ + } + w = ff_convert(w, 1); /* Convert ANSI/OEM to Unicode */ + if (!w) return FR_INVALID_NAME; /* Reject invalid code */ +#endif + if (w < 0x80 && chk_chr("\"*:<>\?|\x7F", w)) /* Reject illegal chars for LFN */ + return FR_INVALID_NAME; + lfn[di++] = w; /* Store the Unicode char */ + } + *path = &p[si]; /* Return pointer to the next segment */ + cf = (w < ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */ +#if _FS_RPATH + if ((di == 1 && lfn[di-1] == '.') || /* Is this a dot entry? */ + (di == 2 && lfn[di-1] == '.' && lfn[di-2] == '.')) { + lfn[di] = 0; + for (i = 0; i < 11; i++) + dj->fn[i] = (i < di) ? '.' : ' '; + dj->fn[i] = cf | NS_DOT; /* This is a dot entry */ + return FR_OK; + } +#endif + while (di) { /* Strip trailing spaces and dots */ + w = lfn[di-1]; + if (w != ' ' && w != '.') break; + di--; + } + if (!di) return FR_INVALID_NAME; /* Reject nul string */ + + lfn[di] = 0; /* LFN is created */ + + /* Create SFN in directory form */ + mem_set(dj->fn, ' ', 11); + for (si = 0; lfn[si] == ' ' || lfn[si] == '.'; si++) ; /* Strip leading spaces and dots */ + if (si) cf |= NS_LOSS | NS_LFN; + while (di && lfn[di - 1] != '.') di--; /* Find extension (di<=si: no extension) */ + + b = i = 0; ni = 8; + for (;;) { + w = lfn[si++]; /* Get an LFN char */ + if (!w) break; /* Break on end of the LFN */ + if (w == ' ' || (w == '.' && si != di)) { /* Remove spaces and dots */ + cf |= NS_LOSS | NS_LFN; continue; + } + + if (i >= ni || si == di) { /* Extension or end of SFN */ + if (ni == 11) { /* Long extension */ + cf |= NS_LOSS | NS_LFN; break; + } + if (si != di) cf |= NS_LOSS | NS_LFN; /* Out of 8.3 format */ + if (si > di) break; /* No extension */ + si = di; i = 8; ni = 11; /* Enter extension section */ + b <<= 2; continue; + } + + if (w >= 0x80) { /* Non ASCII char */ +#ifdef _EXCVT + w = ff_convert(w, 0); /* Unicode -> OEM code */ + if (w) w = excvt[w - 0x80]; /* Convert extended char to upper (SBCS) */ +#else + w = ff_convert(ff_wtoupper(w), 0); /* Upper converted Unicode -> OEM code */ +#endif + cf |= NS_LFN; /* Force create LFN entry */ + } + + if (_DF1S && w >= 0x100) { /* Double byte char (always false on SBCS cfg) */ + if (i >= ni - 1) { + cf |= NS_LOSS | NS_LFN; i = ni; continue; + } + dj->fn[i++] = (BYTE)(w >> 8); + } else { /* Single byte char */ + if (!w || chk_chr("+,;=[]", w)) { /* Replace illegal chars for SFN */ + w = '_'; cf |= NS_LOSS | NS_LFN;/* Lossy conversion */ + } else { + if (IsUpper(w)) { /* ASCII large capital */ + b |= 2; + } else { + if (IsLower(w)) { /* ASCII small capital */ + b |= 1; w -= 0x20; + } + } + } + } + dj->fn[i++] = (BYTE)w; + } + + if (dj->fn[0] == DDE) dj->fn[0] = NDDE; /* If the first char collides with deleted mark, replace it with 0x05 */ + + if (ni == 8) b <<= 2; + if ((b & 0x0C) == 0x0C || (b & 0x03) == 0x03) /* Create LFN entry when there are composite capitals */ + cf |= NS_LFN; + if (!(cf & NS_LFN)) { /* When LFN is in 8.3 format without extended char, NT flags are created */ + if ((b & 0x03) == 0x01) cf |= NS_EXT; /* NT flag (Extension has only small capital) */ + if ((b & 0x0C) == 0x04) cf |= NS_BODY; /* NT flag (Filename has only small capital) */ + } + + dj->fn[NS] = cf; /* SFN is created */ + + return FR_OK; + + +#else /* Non-LFN configuration */ + BYTE b, c, d, *sfn; + UINT ni, si, i; + const char *p; + + /* Create file name in directory form */ + for (p = *path; *p == '/' || *p == '\\'; p++) ; /* Strip duplicated separator */ + sfn = dj->fn; + mem_set(sfn, ' ', 11); + si = i = b = 0; ni = 8; +#if _FS_RPATH + if (p[si] == '.') { /* Is this a dot entry? */ + for (;;) { + c = (BYTE)p[si++]; + if (c != '.' || si >= 3) break; + sfn[i++] = c; + } + if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME; + *path = &p[si]; /* Return pointer to the next segment */ + sfn[NS] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT; /* Set last segment flag if end of path */ + return FR_OK; + } +#endif + for (;;) { + c = (BYTE)p[si++]; + if (c <= ' ' || c == '/' || c == '\\') break; /* Break on end of segment */ + if (c == '.' || i >= ni) { + if (ni != 8 || c != '.') return FR_INVALID_NAME; + i = 8; ni = 11; + b <<= 2; continue; + } + if (c >= 0x80) { /* Extended char? */ + b |= 3; /* Eliminate NT flag */ +#ifdef _EXCVT + c = excvt[c - 0x80]; /* Upper conversion (SBCS) */ +#else +#if !_DF1S /* ASCII only cfg */ + return FR_INVALID_NAME; +#endif +#endif + } + if (IsDBCS1(c)) { /* Check if it is a DBC 1st byte (always false on SBCS cfg) */ + d = (BYTE)p[si++]; /* Get 2nd byte */ + if (!IsDBCS2(d) || i >= ni - 1) /* Reject invalid DBC */ + return FR_INVALID_NAME; + sfn[i++] = c; + sfn[i++] = d; + } else { /* Single byte code */ + if (chk_chr("\"*+,:;<=>\?[]|\x7F", c)) /* Reject illegal chrs for SFN */ + return FR_INVALID_NAME; + if (IsUpper(c)) { /* ASCII large capital? */ + b |= 2; + } else { + if (IsLower(c)) { /* ASCII small capital? */ + b |= 1; c -= 0x20; + } + } + sfn[i++] = c; + } + } + *path = &p[si]; /* Return pointer to the next segment */ + c = (c <= ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */ + + if (!i) return FR_INVALID_NAME; /* Reject nul string */ + if (sfn[0] == DDE) sfn[0] = NDDE; /* When first char collides with DDE, replace it with 0x05 */ + + if (ni == 8) b <<= 2; + if ((b & 0x03) == 0x01) c |= NS_EXT; /* NT flag (Name extension has only small capital) */ + if ((b & 0x0C) == 0x04) c |= NS_BODY; /* NT flag (Name body has only small capital) */ + + sfn[NS] = c; /* Store NT flag, File name is created */ + + return FR_OK; +#endif +} + + + + +/*-----------------------------------------------------------------------*/ +/* Get file information from directory entry */ +/*-----------------------------------------------------------------------*/ +#if _FS_MINIMIZE <= 1 +static +void get_fileinfo ( /* No return code */ + DIR *dj, /* Pointer to the directory object */ + FILINFO *fno /* Pointer to the file information to be filled */ +) +{ + UINT i; + BYTE nt, *dir; + TCHAR *p, c; + + + p = fno->fname; + if (dj->sect) { + dir = dj->dir; + nt = dir[DIR_NTres]; /* NT flag */ + for (i = 0; i < 8; i++) { /* Copy name body */ + c = dir[i]; + if (c == ' ') break; + if (c == NDDE) c = (TCHAR)DDE; + if (_USE_LFN && (nt & NS_BODY) && IsUpper(c)) c += 0x20; +#if _LFN_UNICODE + if (IsDBCS1(c) && i < 7 && IsDBCS2(dir[i+1])) + c = (c << 8) | dir[++i]; + c = ff_convert(c, 1); + if (!c) c = '?'; +#endif + *p++ = c; + } + if (dir[8] != ' ') { /* Copy name extension */ + *p++ = '.'; + for (i = 8; i < 11; i++) { + c = dir[i]; + if (c == ' ') break; + if (_USE_LFN && (nt & NS_EXT) && IsUpper(c)) c += 0x20; +#if _LFN_UNICODE + if (IsDBCS1(c) && i < 10 && IsDBCS2(dir[i+1])) + c = (c << 8) | dir[++i]; + c = ff_convert(c, 1); + if (!c) c = '?'; +#endif + *p++ = c; + } + } + fno->fattrib = dir[DIR_Attr]; /* Attribute */ + fno->fsize = LD_DWORD(dir+DIR_FileSize); /* Size */ + fno->fdate = LD_WORD(dir+DIR_WrtDate); /* Date */ + fno->ftime = LD_WORD(dir+DIR_WrtTime); /* Time */ + } + *p = 0; /* Terminate SFN str by a \0 */ + +#if _USE_LFN + if (fno->lfname && fno->lfsize) { + TCHAR *tp = fno->lfname; + WCHAR w, *lfn; + + i = 0; + if (dj->sect && dj->lfn_idx != 0xFFFF) {/* Get LFN if available */ + lfn = dj->lfn; + while ((w = *lfn++) != 0) { /* Get an LFN char */ +#if !_LFN_UNICODE + w = ff_convert(w, 0); /* Unicode -> OEM conversion */ + if (!w) { i = 0; break; } /* Could not convert, no LFN */ + if (_DF1S && w >= 0x100) /* Put 1st byte if it is a DBC (always false on SBCS cfg) */ + tp[i++] = (TCHAR)(w >> 8); +#endif + if (i >= fno->lfsize - 1) { i = 0; break; } /* Buffer overflow, no LFN */ + tp[i++] = (TCHAR)w; + } + } + tp[i] = 0; /* Terminate the LFN str by a \0 */ + } +#endif +} +#endif /* _FS_MINIMIZE <= 1 */ + + + + +/*-----------------------------------------------------------------------*/ +/* Follow a file path */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ + DIR *dj, /* Directory object to return last directory and found object */ + const TCHAR *path /* Full-path string to find a file or directory */ +) +{ + FRESULT res; + BYTE *dir, ns; + + +#if _FS_RPATH + if (*path == '/' || *path == '\\') { /* There is a heading separator */ + path++; dj->sclust = 0; /* Strip it and start from the root dir */ + } else { /* No heading separator */ + dj->sclust = dj->fs->cdir; /* Start from the current dir */ + } +#else + if (*path == '/' || *path == '\\') /* Strip heading separator if exist */ + path++; + dj->sclust = 0; /* Start from the root dir */ +#endif + + if ((UINT)*path < ' ') { /* Nul path means the start directory itself */ + res = dir_sdi(dj, 0); + dj->dir = 0; + } else { /* Follow path */ + for (;;) { + res = create_name(dj, &path); /* Get a segment */ + if (res != FR_OK) break; + res = dir_find(dj); /* Find it */ + ns = *(dj->fn+NS); + if (res != FR_OK) { /* Failed to find the object */ + if (res != FR_NO_FILE) break; /* Abort if any hard error occurred */ + /* Object not found */ + if (_FS_RPATH && (ns & NS_DOT)) { /* If dot entry is not exit */ + dj->sclust = 0; dj->dir = 0; /* It is the root dir */ + res = FR_OK; + if (!(ns & NS_LAST)) continue; + } else { /* Could not find the object */ + if (!(ns & NS_LAST)) res = FR_NO_PATH; + } + break; + } + if (ns & NS_LAST) break; /* Last segment match. Function completed. */ + dir = dj->dir; /* There is next segment. Follow the sub directory */ + if (!(dir[DIR_Attr] & AM_DIR)) { /* Cannot follow because it is a file */ + res = FR_NO_PATH; break; + } + dj->sclust = ld_clust(dj->fs, dir); + } + } + + return res; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Load a sector and check if it is an FAT Volume Boot Record */ +/*-----------------------------------------------------------------------*/ + +static +BYTE check_fs ( /* 0:FAT-VBR, 1:Any BR but not FAT, 2:Not a BR, 3:Disk error */ + FATFS *fs, /* File system object */ + DWORD sect /* Sector# (lba) to check if it is an FAT boot record or not */ +) +{ + if (disk_read(fs->drv, fs->win, sect, 1) != RES_OK) /* Load boot record */ + return 3; + if (LD_WORD(&fs->win[BS_55AA]) != 0xAA55) /* Check record signature (always placed at offset 510 even if the sector size is >512) */ + return 2; + + if ((LD_DWORD(&fs->win[BS_FilSysType]) & 0xFFFFFF) == 0x544146) /* Check "FAT" string */ + return 0; + if ((LD_DWORD(&fs->win[BS_FilSysType32]) & 0xFFFFFF) == 0x544146) + return 0; + + return 1; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Check if the file system object is valid or not */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT chk_mounted ( /* FR_OK(0): successful, !=0: any error occurred */ + const TCHAR **path, /* Pointer to pointer to the path name (drive number) */ + FATFS **rfs, /* Pointer to pointer to the found file system object */ + BYTE wmode /* !=0: Check write protection for write access */ +) +{ + BYTE fmt, b, pi, *tbl; + UINT vol; + DSTATUS stat; + DWORD bsect, fasize, tsect, sysect, nclst, szbfat; + WORD nrsv; + const TCHAR *p = *path; + FATFS *fs; + + + /* Get logical drive number from the path name */ + vol = p[0] - '0'; /* Is there a drive number? */ + if (vol <= 9 && p[1] == ':') { /* Found a drive number, get and strip it */ + p += 2; *path = p; /* Return pointer to the path name */ + } else { /* No drive number is given */ +#if _FS_RPATH + vol = CurrVol; /* Use current drive */ +#else + vol = 0; /* Use drive 0 */ +#endif + } + + /* Check if the file system object is valid or not */ + *rfs = 0; + if (vol >= _VOLUMES) /* Is the drive number valid? */ + return FR_INVALID_DRIVE; + fs = FatFs[vol]; /* Get corresponding file system object */ + if (!fs) return FR_NOT_ENABLED; /* Is the file system object available? */ + + ENTER_FF(fs); /* Lock file system */ + + *rfs = fs; /* Return pointer to the corresponding file system object */ + if (fs->fs_type) { /* If the volume has been mounted */ + stat = disk_status(fs->drv); + if (!(stat & STA_NOINIT)) { /* and the physical drive is kept initialized (has not been changed), */ + if (!_FS_READONLY && wmode && (stat & STA_PROTECT)) /* Check write protection if needed */ + return FR_WRITE_PROTECTED; + return FR_OK; /* The file system object is valid */ + } + } + + /* The file system object is not valid. */ + /* Following code attempts to mount the volume. (analyze BPB and initialize the fs object) */ + + fs->fs_type = 0; /* Clear the file system object */ + fs->drv = LD2PD(vol); /* Bind the logical drive and a physical drive */ + stat = disk_initialize(fs->drv); /* Initialize the physical drive */ + if (stat & STA_NOINIT) /* Check if the initialization succeeded */ + return FR_NOT_READY; /* Failed to initialize due to no medium or hard error */ + if (!_FS_READONLY && wmode && (stat & STA_PROTECT)) /* Check disk write protection if needed */ + return FR_WRITE_PROTECTED; +#if _MAX_SS != 512 /* Get disk sector size (variable sector size cfg only) */ + if (disk_ioctl(fs->drv, GET_SECTOR_SIZE, &fs->ssize) != RES_OK) + return FR_DISK_ERR; +#endif + /* Search FAT partition on the drive. Supports only generic partitions, FDISK and SFD. */ + fmt = check_fs(fs, bsect = 0); /* Load sector 0 and check if it is an FAT-VBR (in SFD) */ + if (LD2PT(vol) && !fmt) fmt = 1; /* Force non-SFD if the volume is forced partition */ + if (fmt == 1) { /* Not an FAT-VBR, the physical drive can be partitioned */ + /* Check the partition listed in the partition table */ + pi = LD2PT(vol); + if (pi) pi--; + tbl = &fs->win[MBR_Table + pi * SZ_PTE];/* Partition table */ + if (tbl[4]) { /* Is the partition existing? */ + bsect = LD_DWORD(&tbl[8]); /* Partition offset in LBA */ + fmt = check_fs(fs, bsect); /* Check the partition */ + } + } + if (fmt == 3) return FR_DISK_ERR; + if (fmt) return FR_NO_FILESYSTEM; /* No FAT volume is found */ + + /* An FAT volume is found. Following code initializes the file system object */ + + if (LD_WORD(fs->win+BPB_BytsPerSec) != SS(fs)) /* (BPB_BytsPerSec must be equal to the physical sector size) */ + return FR_NO_FILESYSTEM; + + fasize = LD_WORD(fs->win+BPB_FATSz16); /* Number of sectors per FAT */ + if (!fasize) fasize = LD_DWORD(fs->win+BPB_FATSz32); + fs->fsize = fasize; + + fs->n_fats = b = fs->win[BPB_NumFATs]; /* Number of FAT copies */ + if (b != 1 && b != 2) return FR_NO_FILESYSTEM; /* (Must be 1 or 2) */ + fasize *= b; /* Number of sectors for FAT area */ + + fs->csize = b = fs->win[BPB_SecPerClus]; /* Number of sectors per cluster */ + if (!b || (b & (b - 1))) return FR_NO_FILESYSTEM; /* (Must be power of 2) */ + + fs->n_rootdir = LD_WORD(fs->win+BPB_RootEntCnt); /* Number of root directory entries */ + if (fs->n_rootdir % (SS(fs) / SZ_DIR)) return FR_NO_FILESYSTEM; /* (BPB_RootEntCnt must be sector aligned) */ + + tsect = LD_WORD(fs->win+BPB_TotSec16); /* Number of sectors on the volume */ + if (!tsect) tsect = LD_DWORD(fs->win+BPB_TotSec32); + + nrsv = LD_WORD(fs->win+BPB_RsvdSecCnt); /* Number of reserved sectors */ + if (!nrsv) return FR_NO_FILESYSTEM; /* (BPB_RsvdSecCnt must not be 0) */ + + /* Determine the FAT sub type */ + sysect = nrsv + fasize + fs->n_rootdir / (SS(fs) / SZ_DIR); /* RSV+FAT+DIR */ + if (tsect < sysect) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ + nclst = (tsect - sysect) / fs->csize; /* Number of clusters */ + if (!nclst) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ + fmt = FS_FAT12; + if (nclst >= MIN_FAT16) fmt = FS_FAT16; + if (nclst >= MIN_FAT32) fmt = FS_FAT32; + + /* Boundaries and Limits */ + fs->n_fatent = nclst + 2; /* Number of FAT entries */ + fs->database = bsect + sysect; /* Data start sector */ + fs->fatbase = bsect + nrsv; /* FAT start sector */ + if (fmt == FS_FAT32) { + if (fs->n_rootdir) return FR_NO_FILESYSTEM; /* (BPB_RootEntCnt must be 0) */ + fs->dirbase = LD_DWORD(fs->win+BPB_RootClus); /* Root directory start cluster */ + szbfat = fs->n_fatent * 4; /* (Required FAT size) */ + } else { + if (!fs->n_rootdir) return FR_NO_FILESYSTEM; /* (BPB_RootEntCnt must not be 0) */ + fs->dirbase = fs->fatbase + fasize; /* Root directory start sector */ + szbfat = (fmt == FS_FAT16) ? /* (Required FAT size) */ + fs->n_fatent * 2 : fs->n_fatent * 3 / 2 + (fs->n_fatent & 1); + } + if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs)) /* (BPB_FATSz must not be less than required) */ + return FR_NO_FILESYSTEM; + +#if !_FS_READONLY + /* Initialize cluster allocation information */ + fs->free_clust = 0xFFFFFFFF; + fs->last_clust = 0; + + /* Get fsinfo if available */ + if (fmt == FS_FAT32) { + fs->fsi_flag = 0; + fs->fsi_sector = bsect + LD_WORD(fs->win+BPB_FSInfo); + if (disk_read(fs->drv, fs->win, fs->fsi_sector, 1) == RES_OK && + LD_WORD(fs->win+BS_55AA) == 0xAA55 && + LD_DWORD(fs->win+FSI_LeadSig) == 0x41615252 && + LD_DWORD(fs->win+FSI_StrucSig) == 0x61417272) { + fs->last_clust = LD_DWORD(fs->win+FSI_Nxt_Free); + fs->free_clust = LD_DWORD(fs->win+FSI_Free_Count); + } + } +#endif + fs->fs_type = fmt; /* FAT sub-type */ + fs->id = ++Fsid; /* File system mount ID */ + fs->winsect = 0; /* Invalidate sector cache */ + fs->wflag = 0; +#if _FS_RPATH + fs->cdir = 0; /* Current directory (root dir) */ +#endif +#if _FS_LOCK /* Clear file lock semaphores */ + clear_lock(fs); +#endif + + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Check if the file/dir object is valid or not */ +/*-----------------------------------------------------------------------*/ + +static +FRESULT validate ( /* FR_OK(0): The object is valid, !=0: Invalid */ + void* obj /* Pointer to the object FIL/DIR to check validity */ +) +{ + FIL *fil; + + + fil = (FIL*)obj; /* Assuming offset of fs and id in the FIL/DIR is identical */ + if (!fil->fs || !fil->fs->fs_type || fil->fs->id != fil->id) + return FR_INVALID_OBJECT; + + ENTER_FF(fil->fs); /* Lock file system */ + + if (disk_status(fil->fs->drv) & STA_NOINIT) + return FR_NOT_READY; + + return FR_OK; +} + + + + +/*-------------------------------------------------------------------------- + + Public Functions + +--------------------------------------------------------------------------*/ + + + +/*-----------------------------------------------------------------------*/ +/* Mount/Unmount a Logical Drive */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mount ( + BYTE vol, /* Logical drive number to be mounted/unmounted */ + FATFS *fs /* Pointer to new file system object (NULL for unmount)*/ +) +{ + FATFS *rfs; + + + if (vol >= _VOLUMES) /* Check if the drive number is valid */ + return FR_INVALID_DRIVE; + rfs = FatFs[vol]; /* Get current fs object */ + + if (rfs) { +#if _FS_LOCK + clear_lock(rfs); +#endif +#if _FS_REENTRANT /* Discard sync object of the current volume */ + if (!ff_del_syncobj(rfs->sobj)) return FR_INT_ERR; +#endif + rfs->fs_type = 0; /* Clear old fs object */ + } + + if (fs) { + fs->fs_type = 0; /* Clear new fs object */ +#if _FS_REENTRANT /* Create sync object for the new volume */ + if (!ff_cre_syncobj(vol, &fs->sobj)) return FR_INT_ERR; +#endif + } + FatFs[vol] = fs; /* Register new fs object */ + + return FR_OK; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Open or Create a File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_open ( + FIL *fp, /* Pointer to the blank file object */ + const TCHAR *path, /* Pointer to the file name */ + BYTE mode /* Access mode and file open mode flags */ +) +{ + FRESULT res; + DIR dj; + BYTE *dir; + DEF_NAMEBUF; + + + if (!fp) return FR_INVALID_OBJECT; + fp->fs = 0; /* Clear file object */ + +#if !_FS_READONLY + mode &= FA_READ | FA_WRITE | FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW; + res = chk_mounted(&path, &dj.fs, (BYTE)(mode & ~FA_READ)); +#else + mode &= FA_READ; + res = chk_mounted(&path, &dj.fs, 0); +#endif + if (res == FR_OK) { + INIT_BUF(dj); + res = follow_path(&dj, path); /* Follow the file path */ + dir = dj.dir; +#if !_FS_READONLY /* R/W configuration */ + if (res == FR_OK) { + if (!dir) /* Current dir itself */ + res = FR_INVALID_NAME; +#if _FS_LOCK + else + res = chk_lock(&dj, (mode & ~FA_READ) ? 1 : 0); +#endif + } + /* Create or Open a file */ + if (mode & (FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)) { + DWORD dw, cl; + + if (res != FR_OK) { /* No file, create new */ + if (res == FR_NO_FILE) /* There is no file to open, create a new entry */ +#if _FS_LOCK + res = enq_lock() ? dir_register(&dj) : FR_TOO_MANY_OPEN_FILES; +#else + res = dir_register(&dj); +#endif + mode |= FA_CREATE_ALWAYS; /* File is created */ + dir = dj.dir; /* New entry */ + } + else { /* Any object is already existing */ + if (dir[DIR_Attr] & (AM_RDO | AM_DIR)) { /* Cannot overwrite it (R/O or DIR) */ + res = FR_DENIED; + } else { + if (mode & FA_CREATE_NEW) /* Cannot create as new file */ + res = FR_EXIST; + } + } + if (res == FR_OK && (mode & FA_CREATE_ALWAYS)) { /* Truncate it if overwrite mode */ + dw = get_fattime(); /* Created time */ + ST_DWORD(dir+DIR_CrtTime, dw); + dir[DIR_Attr] = 0; /* Reset attribute */ + ST_DWORD(dir+DIR_FileSize, 0); /* size = 0 */ + cl = ld_clust(dj.fs, dir); /* Get start cluster */ + st_clust(dir, 0); /* cluster = 0 */ + dj.fs->wflag = 1; + if (cl) { /* Remove the cluster chain if exist */ + dw = dj.fs->winsect; + res = remove_chain(dj.fs, cl); + if (res == FR_OK) { + dj.fs->last_clust = cl - 1; /* Reuse the cluster hole */ + res = move_window(dj.fs, dw); + } + } + } + } + else { /* Open an existing file */ + if (res == FR_OK) { /* Follow succeeded */ + if (dir[DIR_Attr] & AM_DIR) { /* It is a directory */ + res = FR_NO_FILE; + } else { + if ((mode & FA_WRITE) && (dir[DIR_Attr] & AM_RDO)) /* R/O violation */ + res = FR_DENIED; + } + } + } + if (res == FR_OK) { + if (mode & FA_CREATE_ALWAYS) /* Set file change flag if created or overwritten */ + mode |= FA__WRITTEN; + fp->dir_sect = dj.fs->winsect; /* Pointer to the directory entry */ + fp->dir_ptr = dir; +#if _FS_LOCK + fp->lockid = inc_lock(&dj, (mode & ~FA_READ) ? 1 : 0); + if (!fp->lockid) res = FR_INT_ERR; +#endif + } + +#else /* R/O configuration */ + if (res == FR_OK) { /* Follow succeeded */ + dir = dj.dir; + if (!dir) { /* Current dir itself */ + res = FR_INVALID_NAME; + } else { + if (dir[DIR_Attr] & AM_DIR) /* It is a directory */ + res = FR_NO_FILE; + } + } +#endif + FREE_BUF(); + + if (res == FR_OK) { + fp->flag = mode; /* File access mode */ + fp->sclust = ld_clust(dj.fs, dir); /* File start cluster */ + fp->fsize = LD_DWORD(dir+DIR_FileSize); /* File size */ + fp->fptr = 0; /* File pointer */ + fp->dsect = 0; +#if _USE_FASTSEEK + fp->cltbl = 0; /* Normal seek mode */ +#endif + fp->fs = dj.fs; fp->id = dj.fs->id; /* Validate file object */ + } + } + + LEAVE_FF(dj.fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Read File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_read ( + FIL *fp, /* Pointer to the file object */ + void *buff, /* Pointer to data buffer */ + UINT btr, /* Number of bytes to read */ + UINT *br /* Pointer to number of bytes read */ +) +{ + FRESULT res; + DWORD clst, sect, remain; + UINT rcnt, cc; + BYTE csect, *rbuff = buff; + + + *br = 0; /* Clear read byte counter */ + + res = validate(fp); /* Check validity */ + if (res != FR_OK) LEAVE_FF(fp->fs, res); + if (fp->flag & FA__ERROR) /* Aborted file? */ + LEAVE_FF(fp->fs, FR_INT_ERR); + if (!(fp->flag & FA_READ)) /* Check access mode */ + LEAVE_FF(fp->fs, FR_DENIED); + remain = fp->fsize - fp->fptr; + if (btr > remain) btr = (UINT)remain; /* Truncate btr by remaining bytes */ + + for ( ; btr; /* Repeat until all data read */ + rbuff += rcnt, fp->fptr += rcnt, *br += rcnt, btr -= rcnt) { + if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */ + csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1)); /* Sector offset in the cluster */ + if (!csect) { /* On the cluster boundary? */ + if (fp->fptr == 0) { /* On the top of the file? */ + clst = fp->sclust; /* Follow from the origin */ + } else { /* Middle or end of the file */ +#if _USE_FASTSEEK + if (fp->cltbl) + clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ + else +#endif + clst = get_fat(fp->fs, fp->clust); /* Follow cluster chain on the FAT */ + } + if (clst < 2) ABORT(fp->fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + } + sect = clust2sect(fp->fs, fp->clust); /* Get current sector */ + if (!sect) ABORT(fp->fs, FR_INT_ERR); + sect += csect; + cc = btr / SS(fp->fs); /* When remaining bytes >= sector size, */ + if (cc) { /* Read maximum contiguous sectors directly */ + if (csect + cc > fp->fs->csize) /* Clip at cluster boundary */ + cc = fp->fs->csize - csect; + if (disk_read(fp->fs->drv, rbuff, sect, (BYTE)cc) != RES_OK) + ABORT(fp->fs, FR_DISK_ERR); +#if !_FS_READONLY && _FS_MINIMIZE <= 2 /* Replace one of the read sectors with cached data if it contains a dirty sector */ +#if _FS_TINY + if (fp->fs->wflag && fp->fs->winsect - sect < cc) + mem_cpy(rbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), fp->fs->win, SS(fp->fs)); +#else + if ((fp->flag & FA__DIRTY) && fp->dsect - sect < cc) + mem_cpy(rbuff + ((fp->dsect - sect) * SS(fp->fs)), fp->buf, SS(fp->fs)); +#endif +#endif + rcnt = SS(fp->fs) * cc; /* Number of bytes transferred */ + continue; + } +#if !_FS_TINY + if (fp->dsect != sect) { /* Load data sector if not in cache */ +#if !_FS_READONLY + if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) + ABORT(fp->fs, FR_DISK_ERR); + fp->flag &= ~FA__DIRTY; + } +#endif + if (disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK) /* Fill sector cache */ + ABORT(fp->fs, FR_DISK_ERR); + } +#endif + fp->dsect = sect; + } + rcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs)); /* Get partial sector data from sector buffer */ + if (rcnt > btr) rcnt = btr; +#if _FS_TINY + if (move_window(fp->fs, fp->dsect)) /* Move sector window */ + ABORT(fp->fs, FR_DISK_ERR); + mem_cpy(rbuff, &fp->fs->win[fp->fptr % SS(fp->fs)], rcnt); /* Pick partial sector */ +#else + mem_cpy(rbuff, &fp->buf[fp->fptr % SS(fp->fs)], rcnt); /* Pick partial sector */ +#endif + } + + LEAVE_FF(fp->fs, FR_OK); +} + + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Write File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_write ( + FIL *fp, /* Pointer to the file object */ + const void *buff, /* Pointer to the data to be written */ + UINT btw, /* Number of bytes to write */ + UINT *bw /* Pointer to number of bytes written */ +) +{ + FRESULT res; + DWORD clst, sect; + UINT wcnt, cc; + const BYTE *wbuff = buff; + BYTE csect; + + + *bw = 0; /* Clear write byte counter */ + + res = validate(fp); /* Check validity */ + if (res != FR_OK) LEAVE_FF(fp->fs, res); + if (fp->flag & FA__ERROR) /* Aborted file? */ + LEAVE_FF(fp->fs, FR_INT_ERR); + if (!(fp->flag & FA_WRITE)) /* Check access mode */ + LEAVE_FF(fp->fs, FR_DENIED); + if ((DWORD)(fp->fsize + btw) < fp->fsize) btw = 0; /* File size cannot reach 4GB */ + + for ( ; btw; /* Repeat until all data written */ + wbuff += wcnt, fp->fptr += wcnt, *bw += wcnt, btw -= wcnt) { + if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */ + csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1)); /* Sector offset in the cluster */ + if (!csect) { /* On the cluster boundary? */ + if (fp->fptr == 0) { /* On the top of the file? */ + clst = fp->sclust; /* Follow from the origin */ + if (clst == 0) /* When no cluster is allocated, */ + fp->sclust = clst = create_chain(fp->fs, 0); /* Create a new cluster chain */ + } else { /* Middle or end of the file */ +#if _USE_FASTSEEK + if (fp->cltbl) + clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ + else +#endif + clst = create_chain(fp->fs, fp->clust); /* Follow or stretch cluster chain on the FAT */ + } + if (clst == 0) break; /* Could not allocate a new cluster (disk full) */ + if (clst == 1) ABORT(fp->fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + } +#if _FS_TINY + if (fp->fs->winsect == fp->dsect && move_window(fp->fs, 0)) /* Write-back sector cache */ + ABORT(fp->fs, FR_DISK_ERR); +#else + if (fp->flag & FA__DIRTY) { /* Write-back sector cache */ + if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) + ABORT(fp->fs, FR_DISK_ERR); + fp->flag &= ~FA__DIRTY; + } +#endif + sect = clust2sect(fp->fs, fp->clust); /* Get current sector */ + if (!sect) ABORT(fp->fs, FR_INT_ERR); + sect += csect; + cc = btw / SS(fp->fs); /* When remaining bytes >= sector size, */ + if (cc) { /* Write maximum contiguous sectors directly */ + if (csect + cc > fp->fs->csize) /* Clip at cluster boundary */ + cc = fp->fs->csize - csect; + if (disk_write(fp->fs->drv, wbuff, sect, (BYTE)cc) != RES_OK) + ABORT(fp->fs, FR_DISK_ERR); +#if _FS_TINY + if (fp->fs->winsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ + mem_cpy(fp->fs->win, wbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), SS(fp->fs)); + fp->fs->wflag = 0; + } +#else + if (fp->dsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ + mem_cpy(fp->buf, wbuff + ((fp->dsect - sect) * SS(fp->fs)), SS(fp->fs)); + fp->flag &= ~FA__DIRTY; + } +#endif + wcnt = SS(fp->fs) * cc; /* Number of bytes transferred */ + continue; + } +#if _FS_TINY + if (fp->fptr >= fp->fsize) { /* Avoid silly cache filling at growing edge */ + if (move_window(fp->fs, 0)) ABORT(fp->fs, FR_DISK_ERR); + fp->fs->winsect = sect; + } +#else + if (fp->dsect != sect) { /* Fill sector cache with file data */ + if (fp->fptr < fp->fsize && + disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK) + ABORT(fp->fs, FR_DISK_ERR); + } +#endif + fp->dsect = sect; + } + wcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs));/* Put partial sector into file I/O buffer */ + if (wcnt > btw) wcnt = btw; +#if _FS_TINY + if (move_window(fp->fs, fp->dsect)) /* Move sector window */ + ABORT(fp->fs, FR_DISK_ERR); + mem_cpy(&fp->fs->win[fp->fptr % SS(fp->fs)], wbuff, wcnt); /* Fit partial sector */ + fp->fs->wflag = 1; +#else + mem_cpy(&fp->buf[fp->fptr % SS(fp->fs)], wbuff, wcnt); /* Fit partial sector */ + fp->flag |= FA__DIRTY; +#endif + } + + if (fp->fptr > fp->fsize) fp->fsize = fp->fptr; /* Update file size if needed */ + fp->flag |= FA__WRITTEN; /* Set file change flag */ + + LEAVE_FF(fp->fs, FR_OK); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Synchronize the File Object */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_sync ( + FIL *fp /* Pointer to the file object */ +) +{ + FRESULT res; + DWORD tim; + BYTE *dir; + + + res = validate(fp); /* Check validity of the object */ + if (res == FR_OK) { + if (fp->flag & FA__WRITTEN) { /* Has the file been written? */ +#if !_FS_TINY /* Write-back dirty buffer */ + if (fp->flag & FA__DIRTY) { + if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) + LEAVE_FF(fp->fs, FR_DISK_ERR); + fp->flag &= ~FA__DIRTY; + } +#endif + /* Update the directory entry */ + res = move_window(fp->fs, fp->dir_sect); + if (res == FR_OK) { + dir = fp->dir_ptr; + dir[DIR_Attr] |= AM_ARC; /* Set archive bit */ + ST_DWORD(dir+DIR_FileSize, fp->fsize); /* Update file size */ + st_clust(dir, fp->sclust); /* Update start cluster */ + tim = get_fattime(); /* Update updated time */ + ST_DWORD(dir+DIR_WrtTime, tim); + ST_WORD(dir+DIR_LstAccDate, 0); + fp->flag &= ~FA__WRITTEN; + fp->fs->wflag = 1; + res = sync(fp->fs); + } + } + } + + LEAVE_FF(fp->fs, res); +} + +#endif /* !_FS_READONLY */ + + + + +/*-----------------------------------------------------------------------*/ +/* Close File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_close ( + FIL *fp /* Pointer to the file object to be closed */ +) +{ + FRESULT res; + + +#if _FS_READONLY + res = validate(fp); + { +#if _FS_REENTRANT + FATFS *fs = fp->fs; +#endif + if (res == FR_OK) fp->fs = 0; /* Discard file object */ + LEAVE_FF(fs, res); + } +#else + res = f_sync(fp); /* Flush cached data */ +#if _FS_LOCK + if (res == FR_OK) { /* Decrement open counter */ +#if _FS_REENTRANT + FATFS *fs = fp->fs;; + res = validate(fp); + if (res == FR_OK) { + res = dec_lock(fp->lockid); + unlock_fs(fs, FR_OK); + } +#else + res = dec_lock(fp->lockid); +#endif + } +#endif + if (res == FR_OK) fp->fs = 0; /* Discard file object */ + return res; +#endif +} + + + + +/*-----------------------------------------------------------------------*/ +/* Current Drive/Directory Handlings */ +/*-----------------------------------------------------------------------*/ + +#if _FS_RPATH >= 1 + +FRESULT f_chdrive ( + BYTE drv /* Drive number */ +) +{ + if (drv >= _VOLUMES) return FR_INVALID_DRIVE; + + CurrVol = drv; + + return FR_OK; +} + + + +FRESULT f_chdir ( + const TCHAR *path /* Pointer to the directory path */ +) +{ + FRESULT res; + DIR dj; + DEF_NAMEBUF; + + + res = chk_mounted(&path, &dj.fs, 0); + if (res == FR_OK) { + INIT_BUF(dj); + res = follow_path(&dj, path); /* Follow the path */ + FREE_BUF(); + if (res == FR_OK) { /* Follow completed */ + if (!dj.dir) { + dj.fs->cdir = dj.sclust; /* Start directory itself */ + } else { + if (dj.dir[DIR_Attr] & AM_DIR) /* Reached to the directory */ + dj.fs->cdir = ld_clust(dj.fs, dj.dir); + else + res = FR_NO_PATH; /* Reached but a file */ + } + } + if (res == FR_NO_FILE) res = FR_NO_PATH; + } + + LEAVE_FF(dj.fs, res); +} + + +#if _FS_RPATH >= 2 +FRESULT f_getcwd ( + TCHAR *path, /* Pointer to the directory path */ + UINT sz_path /* Size of path */ +) +{ + FRESULT res; + DIR dj; + UINT i, n; + DWORD ccl; + TCHAR *tp; + FILINFO fno; + DEF_NAMEBUF; + + + *path = 0; + res = chk_mounted((const TCHAR**)&path, &dj.fs, 0); /* Get current volume */ + if (res == FR_OK) { + INIT_BUF(dj); + i = sz_path; /* Bottom of buffer (dir stack base) */ + dj.sclust = dj.fs->cdir; /* Start to follow upper dir from current dir */ + while ((ccl = dj.sclust) != 0) { /* Repeat while current dir is a sub-dir */ + res = dir_sdi(&dj, 1); /* Get parent dir */ + if (res != FR_OK) break; + res = dir_read(&dj); + if (res != FR_OK) break; + dj.sclust = ld_clust(dj.fs, dj.dir); /* Goto parent dir */ + res = dir_sdi(&dj, 0); + if (res != FR_OK) break; + do { /* Find the entry links to the child dir */ + res = dir_read(&dj); + if (res != FR_OK) break; + if (ccl == ld_clust(dj.fs, dj.dir)) break; /* Found the entry */ + res = dir_next(&dj, 0); + } while (res == FR_OK); + if (res == FR_NO_FILE) res = FR_INT_ERR;/* It cannot be 'not found'. */ + if (res != FR_OK) break; +#if _USE_LFN + fno.lfname = path; + fno.lfsize = i; +#endif + get_fileinfo(&dj, &fno); /* Get the dir name and push it to the buffer */ + tp = fno.fname; + if (_USE_LFN && *path) tp = path; + for (n = 0; tp[n]; n++) ; + if (i < n + 3) { + res = FR_NOT_ENOUGH_CORE; break; + } + while (n) path[--i] = tp[--n]; + path[--i] = '/'; + } + tp = path; + if (res == FR_OK) { + *tp++ = '0' + CurrVol; /* Put drive number */ + *tp++ = ':'; + if (i == sz_path) { /* Root-dir */ + *tp++ = '/'; + } else { /* Sub-dir */ + do /* Add stacked path str */ + *tp++ = path[i++]; + while (i < sz_path); + } + } + *tp = 0; + FREE_BUF(); + } + + LEAVE_FF(dj.fs, res); +} +#endif /* _FS_RPATH >= 2 */ +#endif /* _FS_RPATH >= 1 */ + + + +#if _FS_MINIMIZE <= 2 +/*-----------------------------------------------------------------------*/ +/* Seek File R/W Pointer */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_lseek ( + FIL *fp, /* Pointer to the file object */ + DWORD ofs /* File pointer from top of file */ +) +{ + FRESULT res; + + + res = validate(fp); /* Check validity of the object */ + if (res != FR_OK) LEAVE_FF(fp->fs, res); + if (fp->flag & FA__ERROR) /* Check abort flag */ + LEAVE_FF(fp->fs, FR_INT_ERR); + +#if _USE_FASTSEEK + if (fp->cltbl) { /* Fast seek */ + DWORD cl, pcl, ncl, tcl, dsc, tlen, ulen, *tbl; + + if (ofs == CREATE_LINKMAP) { /* Create CLMT */ + tbl = fp->cltbl; + tlen = *tbl++; ulen = 2; /* Given table size and required table size */ + cl = fp->sclust; /* Top of the chain */ + if (cl) { + do { + /* Get a fragment */ + tcl = cl; ncl = 0; ulen += 2; /* Top, length and used items */ + do { + pcl = cl; ncl++; + cl = get_fat(fp->fs, cl); + if (cl <= 1) ABORT(fp->fs, FR_INT_ERR); + if (cl == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); + } while (cl == pcl + 1); + if (ulen <= tlen) { /* Store the length and top of the fragment */ + *tbl++ = ncl; *tbl++ = tcl; + } + } while (cl < fp->fs->n_fatent); /* Repeat until end of chain */ + } + *fp->cltbl = ulen; /* Number of items used */ + if (ulen <= tlen) + *tbl = 0; /* Terminate table */ + else + res = FR_NOT_ENOUGH_CORE; /* Given table size is smaller than required */ + + } else { /* Fast seek */ + if (ofs > fp->fsize) /* Clip offset at the file size */ + ofs = fp->fsize; + fp->fptr = ofs; /* Set file pointer */ + if (ofs) { + fp->clust = clmt_clust(fp, ofs - 1); + dsc = clust2sect(fp->fs, fp->clust); + if (!dsc) ABORT(fp->fs, FR_INT_ERR); + dsc += (ofs - 1) / SS(fp->fs) & (fp->fs->csize - 1); + if (fp->fptr % SS(fp->fs) && dsc != fp->dsect) { /* Refill sector cache if needed */ +#if !_FS_TINY +#if !_FS_READONLY + if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) + ABORT(fp->fs, FR_DISK_ERR); + fp->flag &= ~FA__DIRTY; + } +#endif + if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK) /* Load current sector */ + ABORT(fp->fs, FR_DISK_ERR); +#endif + fp->dsect = dsc; + } + } + } + } else +#endif + + /* Normal Seek */ + { + DWORD clst, bcs, nsect, ifptr; + + if (ofs > fp->fsize /* In read-only mode, clip offset with the file size */ +#if !_FS_READONLY + && !(fp->flag & FA_WRITE) +#endif + ) ofs = fp->fsize; + + ifptr = fp->fptr; + fp->fptr = nsect = 0; + if (ofs) { + bcs = (DWORD)fp->fs->csize * SS(fp->fs); /* Cluster size (byte) */ + if (ifptr > 0 && + (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */ + fp->fptr = (ifptr - 1) & ~(bcs - 1); /* start from the current cluster */ + ofs -= fp->fptr; + clst = fp->clust; + } else { /* When seek to back cluster, */ + clst = fp->sclust; /* start from the first cluster */ +#if !_FS_READONLY + if (clst == 0) { /* If no cluster chain, create a new chain */ + clst = create_chain(fp->fs, 0); + if (clst == 1) ABORT(fp->fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); + fp->sclust = clst; + } +#endif + fp->clust = clst; + } + if (clst != 0) { + while (ofs > bcs) { /* Cluster following loop */ +#if !_FS_READONLY + if (fp->flag & FA_WRITE) { /* Check if in write mode or not */ + clst = create_chain(fp->fs, clst); /* Force stretch if in write mode */ + if (clst == 0) { /* When disk gets full, clip file size */ + ofs = bcs; break; + } + } else +#endif + clst = get_fat(fp->fs, clst); /* Follow cluster chain if not in write mode */ + if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); + if (clst <= 1 || clst >= fp->fs->n_fatent) ABORT(fp->fs, FR_INT_ERR); + fp->clust = clst; + fp->fptr += bcs; + ofs -= bcs; + } + fp->fptr += ofs; + if (ofs % SS(fp->fs)) { + nsect = clust2sect(fp->fs, clst); /* Current sector */ + if (!nsect) ABORT(fp->fs, FR_INT_ERR); + nsect += ofs / SS(fp->fs); + } + } + } + if (fp->fptr % SS(fp->fs) && nsect != fp->dsect) { /* Fill sector cache if needed */ +#if !_FS_TINY +#if !_FS_READONLY + if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */ + if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) + ABORT(fp->fs, FR_DISK_ERR); + fp->flag &= ~FA__DIRTY; + } +#endif + if (disk_read(fp->fs->drv, fp->buf, nsect, 1) != RES_OK) /* Fill sector cache */ + ABORT(fp->fs, FR_DISK_ERR); +#endif + fp->dsect = nsect; + } +#if !_FS_READONLY + if (fp->fptr > fp->fsize) { /* Set file change flag if the file size is extended */ + fp->fsize = fp->fptr; + fp->flag |= FA__WRITTEN; + } +#endif + } + + LEAVE_FF(fp->fs, res); +} + + + +#if _FS_MINIMIZE <= 1 +/*-----------------------------------------------------------------------*/ +/* Create a Directory Object */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_opendir ( + DIR *dj, /* Pointer to directory object to create */ + const TCHAR *path /* Pointer to the directory path */ +) +{ + FRESULT res; + FATFS *fs; + DEF_NAMEBUF; + + + if (!dj) return FR_INVALID_OBJECT; + + res = chk_mounted(&path, &dj->fs, 0); + fs = dj->fs; + if (res == FR_OK) { + INIT_BUF(*dj); + res = follow_path(dj, path); /* Follow the path to the directory */ + FREE_BUF(); + if (res == FR_OK) { /* Follow completed */ + if (dj->dir) { /* It is not the root dir */ + if (dj->dir[DIR_Attr] & AM_DIR) { /* The object is a directory */ + dj->sclust = ld_clust(fs, dj->dir); + } else { /* The object is not a directory */ + res = FR_NO_PATH; + } + } + if (res == FR_OK) { + dj->id = fs->id; + res = dir_sdi(dj, 0); /* Rewind dir */ + } + } + if (res == FR_NO_FILE) res = FR_NO_PATH; + if (res != FR_OK) dj->fs = 0; /* Invalidate the dir object if function failed */ + } else { + dj->fs = 0; + } + + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Read Directory Entry in Sequence */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_readdir ( + DIR *dj, /* Pointer to the open directory object */ + FILINFO *fno /* Pointer to file information to return */ +) +{ + FRESULT res; + DEF_NAMEBUF; + + + res = validate(dj); /* Check validity of the object */ + if (res == FR_OK) { + if (!fno) { + res = dir_sdi(dj, 0); /* Rewind the directory object */ + } else { + INIT_BUF(*dj); + res = dir_read(dj); /* Read an directory item */ + if (res == FR_NO_FILE) { /* Reached end of dir */ + dj->sect = 0; + res = FR_OK; + } + if (res == FR_OK) { /* A valid entry is found */ + get_fileinfo(dj, fno); /* Get the object information */ + res = dir_next(dj, 0); /* Increment index for next */ + if (res == FR_NO_FILE) { + dj->sect = 0; + res = FR_OK; + } + } + FREE_BUF(); + } + } + + LEAVE_FF(dj->fs, res); +} + + + +#if _FS_MINIMIZE == 0 +/*-----------------------------------------------------------------------*/ +/* Get File Status */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_stat ( + const TCHAR *path, /* Pointer to the file path */ + FILINFO *fno /* Pointer to file information to return */ +) +{ + FRESULT res; + DIR dj; + DEF_NAMEBUF; + + + res = chk_mounted(&path, &dj.fs, 0); + if (res == FR_OK) { + INIT_BUF(dj); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK) { /* Follow completed */ + if (dj.dir) /* Found an object */ + get_fileinfo(&dj, fno); + else /* It is root dir */ + res = FR_INVALID_NAME; + } + FREE_BUF(); + } + + LEAVE_FF(dj.fs, res); +} + + + +#if !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Get Number of Free Clusters */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_getfree ( + const TCHAR *path, /* Pointer to the logical drive number (root dir) */ + DWORD *nclst, /* Pointer to the variable to return number of free clusters */ + FATFS **fatfs /* Pointer to pointer to corresponding file system object to return */ +) +{ + FRESULT res; + FATFS *fs; + DWORD n, clst, sect, stat; + UINT i; + BYTE fat, *p; + + + /* Get drive number */ + res = chk_mounted(&path, fatfs, 0); + fs = *fatfs; + if (res == FR_OK) { + /* If free_clust is valid, return it without full cluster scan */ + if (fs->free_clust <= fs->n_fatent - 2) { + *nclst = fs->free_clust; + } else { + /* Get number of free clusters */ + fat = fs->fs_type; + n = 0; + if (fat == FS_FAT12) { + clst = 2; + do { + stat = get_fat(fs, clst); + if (stat == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } + if (stat == 1) { res = FR_INT_ERR; break; } + if (stat == 0) n++; + } while (++clst < fs->n_fatent); + } else { + clst = fs->n_fatent; + sect = fs->fatbase; + i = 0; p = 0; + do { + if (!i) { + res = move_window(fs, sect++); + if (res != FR_OK) break; + p = fs->win; + i = SS(fs); + } + if (fat == FS_FAT16) { + if (LD_WORD(p) == 0) n++; + p += 2; i -= 2; + } else { + if ((LD_DWORD(p) & 0x0FFFFFFF) == 0) n++; + p += 4; i -= 4; + } + } while (--clst); + } + fs->free_clust = n; + if (fat == FS_FAT32) fs->fsi_flag = 1; + *nclst = n; + } + } + LEAVE_FF(fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Truncate File */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_truncate ( + FIL *fp /* Pointer to the file object */ +) +{ + FRESULT res; + DWORD ncl; + + + if (!fp) return FR_INVALID_OBJECT; + + res = validate(fp); /* Check validity of the object */ + if (res == FR_OK) { + if (fp->flag & FA__ERROR) { /* Check abort flag */ + res = FR_INT_ERR; + } else { + if (!(fp->flag & FA_WRITE)) /* Check access mode */ + res = FR_DENIED; + } + } + if (res == FR_OK) { + if (fp->fsize > fp->fptr) { + fp->fsize = fp->fptr; /* Set file size to current R/W point */ + fp->flag |= FA__WRITTEN; + if (fp->fptr == 0) { /* When set file size to zero, remove entire cluster chain */ + res = remove_chain(fp->fs, fp->sclust); + fp->sclust = 0; + } else { /* When truncate a part of the file, remove remaining clusters */ + ncl = get_fat(fp->fs, fp->clust); + res = FR_OK; + if (ncl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (ncl == 1) res = FR_INT_ERR; + if (res == FR_OK && ncl < fp->fs->n_fatent) { + res = put_fat(fp->fs, fp->clust, 0x0FFFFFFF); + if (res == FR_OK) res = remove_chain(fp->fs, ncl); + } + } + } + if (res != FR_OK) fp->flag |= FA__ERROR; + } + + LEAVE_FF(fp->fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Delete a File or Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_unlink ( + const TCHAR *path /* Pointer to the file or directory path */ +) +{ + FRESULT res; + DIR dj, sdj; + BYTE *dir; + DWORD dclst; + DEF_NAMEBUF; + + + res = chk_mounted(&path, &dj.fs, 1); + if (res == FR_OK) { + INIT_BUF(dj); + res = follow_path(&dj, path); /* Follow the file path */ + if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT)) + res = FR_INVALID_NAME; /* Cannot remove dot entry */ +#if _FS_LOCK + if (res == FR_OK) res = chk_lock(&dj, 2); /* Cannot remove open file */ +#endif + if (res == FR_OK) { /* The object is accessible */ + dir = dj.dir; + if (!dir) { + res = FR_INVALID_NAME; /* Cannot remove the start directory */ + } else { + if (dir[DIR_Attr] & AM_RDO) + res = FR_DENIED; /* Cannot remove R/O object */ + } + dclst = ld_clust(dj.fs, dir); + if (res == FR_OK && (dir[DIR_Attr] & AM_DIR)) { /* Is it a sub-dir? */ + if (dclst < 2) { + res = FR_INT_ERR; + } else { + mem_cpy(&sdj, &dj, sizeof (DIR)); /* Check if the sub-dir is empty or not */ + sdj.sclust = dclst; + res = dir_sdi(&sdj, 2); /* Exclude dot entries */ + if (res == FR_OK) { + res = dir_read(&sdj); + if (res == FR_OK /* Not empty dir */ +#if _FS_RPATH + || dclst == dj.fs->cdir /* Current dir */ +#endif + ) res = FR_DENIED; + if (res == FR_NO_FILE) res = FR_OK; /* Empty */ + } + } + } + if (res == FR_OK) { + res = dir_remove(&dj); /* Remove the directory entry */ + if (res == FR_OK) { + if (dclst) /* Remove the cluster chain if exist */ + res = remove_chain(dj.fs, dclst); + if (res == FR_OK) res = sync(dj.fs); + } + } + } + FREE_BUF(); + } + LEAVE_FF(dj.fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Create a Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_mkdir ( + const TCHAR *path /* Pointer to the directory path */ +) +{ + FRESULT res; + DIR dj; + BYTE *dir, n; + DWORD dsc, dcl, pcl, tim = get_fattime(); + DEF_NAMEBUF; + + + res = chk_mounted(&path, &dj.fs, 1); + if (res == FR_OK) { + INIT_BUF(dj); + res = follow_path(&dj, path); /* Follow the file path */ + if (res == FR_OK) res = FR_EXIST; /* Any object with same name is already existing */ + if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NS] & NS_DOT)) + res = FR_INVALID_NAME; + if (res == FR_NO_FILE) { /* Can create a new directory */ + dcl = create_chain(dj.fs, 0); /* Allocate a cluster for the new directory table */ + res = FR_OK; + if (dcl == 0) res = FR_DENIED; /* No space to allocate a new cluster */ + if (dcl == 1) res = FR_INT_ERR; + if (dcl == 0xFFFFFFFF) res = FR_DISK_ERR; + if (res == FR_OK) /* Flush FAT */ + res = move_window(dj.fs, 0); + if (res == FR_OK) { /* Initialize the new directory table */ + dsc = clust2sect(dj.fs, dcl); + dir = dj.fs->win; + mem_set(dir, 0, SS(dj.fs)); + mem_set(dir+DIR_Name, ' ', 8+3); /* Create "." entry */ + dir[DIR_Name] = '.'; + dir[DIR_Attr] = AM_DIR; + ST_DWORD(dir+DIR_WrtTime, tim); + st_clust(dir, dcl); + mem_cpy(dir+SZ_DIR, dir, SZ_DIR); /* Create ".." entry */ + dir[33] = '.'; pcl = dj.sclust; + if (dj.fs->fs_type == FS_FAT32 && pcl == dj.fs->dirbase) + pcl = 0; + st_clust(dir+SZ_DIR, pcl); + for (n = dj.fs->csize; n; n--) { /* Write dot entries and clear following sectors */ + dj.fs->winsect = dsc++; + dj.fs->wflag = 1; + res = move_window(dj.fs, 0); + if (res != FR_OK) break; + mem_set(dir, 0, SS(dj.fs)); + } + } + if (res == FR_OK) res = dir_register(&dj); /* Register the object to the directory */ + if (res != FR_OK) { + remove_chain(dj.fs, dcl); /* Could not register, remove cluster chain */ + } else { + dir = dj.dir; + dir[DIR_Attr] = AM_DIR; /* Attribute */ + ST_DWORD(dir+DIR_WrtTime, tim); /* Created time */ + st_clust(dir, dcl); /* Table start cluster */ + dj.fs->wflag = 1; + res = sync(dj.fs); + } + } + FREE_BUF(); + } + + LEAVE_FF(dj.fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Change Attribute */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_chmod ( + const TCHAR *path, /* Pointer to the file path */ + BYTE value, /* Attribute bits */ + BYTE mask /* Attribute mask to change */ +) +{ + FRESULT res; + DIR dj; + BYTE *dir; + DEF_NAMEBUF; + + + res = chk_mounted(&path, &dj.fs, 1); + if (res == FR_OK) { + INIT_BUF(dj); + res = follow_path(&dj, path); /* Follow the file path */ + FREE_BUF(); + if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT)) + res = FR_INVALID_NAME; + if (res == FR_OK) { + dir = dj.dir; + if (!dir) { /* Is it a root directory? */ + res = FR_INVALID_NAME; + } else { /* File or sub directory */ + mask &= AM_RDO|AM_HID|AM_SYS|AM_ARC; /* Valid attribute mask */ + dir[DIR_Attr] = (value & mask) | (dir[DIR_Attr] & (BYTE)~mask); /* Apply attribute change */ + dj.fs->wflag = 1; + res = sync(dj.fs); + } + } + } + + LEAVE_FF(dj.fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Change Timestamp */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_utime ( + const TCHAR *path, /* Pointer to the file/directory name */ + const FILINFO *fno /* Pointer to the time stamp to be set */ +) +{ + FRESULT res; + DIR dj; + BYTE *dir; + DEF_NAMEBUF; + + + res = chk_mounted(&path, &dj.fs, 1); + if (res == FR_OK) { + INIT_BUF(dj); + res = follow_path(&dj, path); /* Follow the file path */ + FREE_BUF(); + if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT)) + res = FR_INVALID_NAME; + if (res == FR_OK) { + dir = dj.dir; + if (!dir) { /* Root directory */ + res = FR_INVALID_NAME; + } else { /* File or sub-directory */ + ST_WORD(dir+DIR_WrtTime, fno->ftime); + ST_WORD(dir+DIR_WrtDate, fno->fdate); + dj.fs->wflag = 1; + res = sync(dj.fs); + } + } + } + + LEAVE_FF(dj.fs, res); +} + + + + +/*-----------------------------------------------------------------------*/ +/* Rename File/Directory */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_rename ( + const TCHAR *path_old, /* Pointer to the old name */ + const TCHAR *path_new /* Pointer to the new name */ +) +{ + FRESULT res; + DIR djo, djn; + BYTE buf[21], *dir; + DWORD dw; + DEF_NAMEBUF; + + + res = chk_mounted(&path_old, &djo.fs, 1); + if (res == FR_OK) { + djn.fs = djo.fs; + INIT_BUF(djo); + res = follow_path(&djo, path_old); /* Check old object */ + if (_FS_RPATH && res == FR_OK && (djo.fn[NS] & NS_DOT)) + res = FR_INVALID_NAME; +#if _FS_LOCK + if (res == FR_OK) res = chk_lock(&djo, 2); +#endif + if (res == FR_OK) { /* Old object is found */ + if (!djo.dir) { /* Is root dir? */ + res = FR_NO_FILE; + } else { + mem_cpy(buf, djo.dir+DIR_Attr, 21); /* Save the object information except for name */ + mem_cpy(&djn, &djo, sizeof (DIR)); /* Check new object */ + res = follow_path(&djn, path_new); + if (res == FR_OK) res = FR_EXIST; /* The new object name is already existing */ + if (res == FR_NO_FILE) { /* Is it a valid path and no name collision? */ +/* Start critical section that an interruption or error can cause cross-link */ + res = dir_register(&djn); /* Register the new entry */ + if (res == FR_OK) { + dir = djn.dir; /* Copy object information except for name */ + mem_cpy(dir+13, buf+2, 19); + dir[DIR_Attr] = buf[0] | AM_ARC; + djo.fs->wflag = 1; + if (djo.sclust != djn.sclust && (dir[DIR_Attr] & AM_DIR)) { /* Update .. entry in the directory if needed */ + dw = clust2sect(djo.fs, ld_clust(djo.fs, dir)); + if (!dw) { + res = FR_INT_ERR; + } else { + res = move_window(djo.fs, dw); + dir = djo.fs->win+SZ_DIR; /* .. entry */ + if (res == FR_OK && dir[1] == '.') { + dw = (djo.fs->fs_type == FS_FAT32 && djn.sclust == djo.fs->dirbase) ? 0 : djn.sclust; + st_clust(dir, dw); + djo.fs->wflag = 1; + } + } + } + if (res == FR_OK) { + res = dir_remove(&djo); /* Remove old entry */ + if (res == FR_OK) + res = sync(djo.fs); + } + } +/* End critical section */ + } + } + } + FREE_BUF(); + } + LEAVE_FF(djo.fs, res); +} + +#endif /* !_FS_READONLY */ +#endif /* _FS_MINIMIZE == 0 */ +#endif /* _FS_MINIMIZE <= 1 */ +#endif /* _FS_MINIMIZE <= 2 */ + + + +/*-----------------------------------------------------------------------*/ +/* Forward data to the stream directly (available on only tiny cfg) */ +/*-----------------------------------------------------------------------*/ +#if _USE_FORWARD && _FS_TINY + +FRESULT f_forward ( + FIL *fp, /* Pointer to the file object */ + UINT (*func)(const BYTE*,UINT), /* Pointer to the streaming function */ + UINT btr, /* Number of bytes to forward */ + UINT *bf /* Pointer to number of bytes forwarded */ +) +{ + FRESULT res; + DWORD remain, clst, sect; + UINT rcnt; + BYTE csect; + + + *bf = 0; /* Clear transfer byte counter */ + + if (!fp) return FR_INVALID_OBJECT; + + res = validate(fp); /* Check validity of the object */ + if (res != FR_OK) LEAVE_FF(fp->fs, res); + if (fp->flag & FA__ERROR) /* Check error flag */ + LEAVE_FF(fp->fs, FR_INT_ERR); + if (!(fp->flag & FA_READ)) /* Check access mode */ + LEAVE_FF(fp->fs, FR_DENIED); + + remain = fp->fsize - fp->fptr; + if (btr > remain) btr = (UINT)remain; /* Truncate btr by remaining bytes */ + + for ( ; btr && (*func)(0, 0); /* Repeat until all data transferred or stream becomes busy */ + fp->fptr += rcnt, *bf += rcnt, btr -= rcnt) { + csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1)); /* Sector offset in the cluster */ + if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */ + if (!csect) { /* On the cluster boundary? */ + clst = (fp->fptr == 0) ? /* On the top of the file? */ + fp->sclust : get_fat(fp->fs, fp->clust); + if (clst <= 1) ABORT(fp->fs, FR_INT_ERR); + if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); + fp->clust = clst; /* Update current cluster */ + } + } + sect = clust2sect(fp->fs, fp->clust); /* Get current data sector */ + if (!sect) ABORT(fp->fs, FR_INT_ERR); + sect += csect; + if (move_window(fp->fs, sect)) /* Move sector window */ + ABORT(fp->fs, FR_DISK_ERR); + fp->dsect = sect; + rcnt = SS(fp->fs) - (WORD)(fp->fptr % SS(fp->fs)); /* Forward data from sector window */ + if (rcnt > btr) rcnt = btr; + rcnt = (*func)(&fp->fs->win[(WORD)fp->fptr % SS(fp->fs)], rcnt); + if (!rcnt) ABORT(fp->fs, FR_INT_ERR); + } + + LEAVE_FF(fp->fs, FR_OK); +} +#endif /* _USE_FORWARD */ + + + +#if _USE_MKFS && !_FS_READONLY +/*-----------------------------------------------------------------------*/ +/* Create File System on the Drive */ +/*-----------------------------------------------------------------------*/ +#define N_ROOTDIR 512 /* Number of root dir entries for FAT12/16 */ +#define N_FATS 1 /* Number of FAT copies (1 or 2) */ + + +FRESULT f_mkfs ( + BYTE drv, /* Logical drive number */ + BYTE sfd, /* Partitioning rule 0:FDISK, 1:SFD */ + UINT au /* Allocation unit size [bytes] */ +) +{ + static const WORD vst[] = { 1024, 512, 256, 128, 64, 32, 16, 8, 4, 2, 0}; + static const WORD cst[] = {32768, 16384, 8192, 4096, 2048, 16384, 8192, 4096, 2048, 1024, 512}; + BYTE fmt, md, sys, *tbl, pdrv, part; + DWORD n_clst, vs, n, wsect; + UINT i; + DWORD b_vol, b_fat, b_dir, b_data; /* LBA */ + DWORD n_vol, n_rsv, n_fat, n_dir; /* Size */ + FATFS *fs; + DSTATUS stat; + + + /* Check mounted drive and clear work area */ + if (drv >= _VOLUMES) return FR_INVALID_DRIVE; + if (sfd > 1) return FR_INVALID_PARAMETER; + if (au & (au - 1)) return FR_INVALID_PARAMETER; + fs = FatFs[drv]; + if (!fs) return FR_NOT_ENABLED; + fs->fs_type = 0; + pdrv = LD2PD(drv); /* Physical drive */ + part = LD2PT(drv); /* Partition (0:auto detect, 1-4:get from partition table)*/ + + /* Get disk statics */ + stat = disk_initialize(pdrv); + if (stat & STA_NOINIT) return FR_NOT_READY; + if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; +#if _MAX_SS != 512 /* Get disk sector size */ + if (disk_ioctl(pdrv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK || SS(fs) > _MAX_SS) + return FR_DISK_ERR; +#endif + if (_MULTI_PARTITION && part) { + /* Get partition information from partition table in the MBR */ + if (disk_read(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR; + if (LD_WORD(fs->win+BS_55AA) != 0xAA55) return FR_MKFS_ABORTED; + tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE]; + if (!tbl[4]) return FR_MKFS_ABORTED; /* No partition? */ + b_vol = LD_DWORD(tbl+8); /* Volume start sector */ + n_vol = LD_DWORD(tbl+12); /* Volume size */ + } else { + /* Create a partition in this function */ + if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &n_vol) != RES_OK || n_vol < 128) + return FR_DISK_ERR; + b_vol = (sfd) ? 0 : 63; /* Volume start sector */ + n_vol -= b_vol; /* Volume size */ + } + + if (!au) { /* AU auto selection */ + vs = n_vol / (2000 / (SS(fs) / 512)); + for (i = 0; vs < vst[i]; i++) ; + au = cst[i]; + } + au /= SS(fs); /* Number of sectors per cluster */ + if (au == 0) au = 1; + if (au > 128) au = 128; + + /* Pre-compute number of clusters and FAT sub-type */ + n_clst = n_vol / au; + fmt = FS_FAT12; + if (n_clst >= MIN_FAT16) fmt = FS_FAT16; + if (n_clst >= MIN_FAT32) fmt = FS_FAT32; + + /* Determine offset and size of FAT structure */ + if (fmt == FS_FAT32) { + n_fat = ((n_clst * 4) + 8 + SS(fs) - 1) / SS(fs); + n_rsv = 32; + n_dir = 0; + } else { + n_fat = (fmt == FS_FAT12) ? (n_clst * 3 + 1) / 2 + 3 : (n_clst * 2) + 4; + n_fat = (n_fat + SS(fs) - 1) / SS(fs); + n_rsv = 1; + n_dir = (DWORD)N_ROOTDIR * SZ_DIR / SS(fs); + } + b_fat = b_vol + n_rsv; /* FAT area start sector */ + b_dir = b_fat + n_fat * N_FATS; /* Directory area start sector */ + b_data = b_dir + n_dir; /* Data area start sector */ + if (n_vol < b_data + au - b_vol) return FR_MKFS_ABORTED; /* Too small volume */ + + /* Align data start sector to erase block boundary (for flash memory media) */ + if (disk_ioctl(pdrv, GET_BLOCK_SIZE, &n) != RES_OK || !n || n > 32768) n = 1; + n = (b_data + n - 1) & ~(n - 1); /* Next nearest erase block from current data start */ + n = (n - b_data) / N_FATS; + if (fmt == FS_FAT32) { /* FAT32: Move FAT offset */ + n_rsv += n; + b_fat += n; + } else { /* FAT12/16: Expand FAT size */ + n_fat += n; + } + + /* Determine number of clusters and final check of validity of the FAT sub-type */ + n_clst = (n_vol - n_rsv - n_fat * N_FATS - n_dir) / au; + if ( (fmt == FS_FAT16 && n_clst < MIN_FAT16) + || (fmt == FS_FAT32 && n_clst < MIN_FAT32)) + return FR_MKFS_ABORTED; + + switch (fmt) { /* Determine system ID for partition table */ + case FS_FAT12: sys = 0x01; break; + case FS_FAT16: sys = (n_vol < 0x10000) ? 0x04 : 0x06; break; + default: sys = 0x0C; + } + + if (_MULTI_PARTITION && part) { + /* Update system ID in the partition table */ + tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE]; + tbl[4] = sys; + if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR; + md = 0xF8; + } else { + if (sfd) { /* No partition table (SFD) */ + md = 0xF0; + } else { /* Create partition table (FDISK) */ + mem_set(fs->win, 0, SS(fs)); + tbl = fs->win+MBR_Table; /* Create partition table for single partition in the drive */ + tbl[1] = 1; /* Partition start head */ + tbl[2] = 1; /* Partition start sector */ + tbl[3] = 0; /* Partition start cylinder */ + tbl[4] = sys; /* System type */ + tbl[5] = 254; /* Partition end head */ + n = (b_vol + n_vol) / 63 / 255; + tbl[6] = (BYTE)((n >> 2) | 63); /* Partition end sector */ + tbl[7] = (BYTE)n; /* End cylinder */ + ST_DWORD(tbl+8, 63); /* Partition start in LBA */ + ST_DWORD(tbl+12, n_vol); /* Partition size in LBA */ + ST_WORD(fs->win+BS_55AA, 0xAA55); /* MBR signature */ + if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) /* Write it to the MBR sector */ + return FR_DISK_ERR; + md = 0xF8; + } + } + + /* Create BPB in the VBR */ + tbl = fs->win; /* Clear sector */ + mem_set(tbl, 0, SS(fs)); + mem_cpy(tbl, "\xEB\xFE\x90" "MSDOS5.0", 11);/* Boot jump code, OEM name */ + i = SS(fs); /* Sector size */ + ST_WORD(tbl+BPB_BytsPerSec, i); + tbl[BPB_SecPerClus] = (BYTE)au; /* Sectors per cluster */ + ST_WORD(tbl+BPB_RsvdSecCnt, n_rsv); /* Reserved sectors */ + tbl[BPB_NumFATs] = N_FATS; /* Number of FATs */ + i = (fmt == FS_FAT32) ? 0 : N_ROOTDIR; /* Number of rootdir entries */ + ST_WORD(tbl+BPB_RootEntCnt, i); + if (n_vol < 0x10000) { /* Number of total sectors */ + ST_WORD(tbl+BPB_TotSec16, n_vol); + } else { + ST_DWORD(tbl+BPB_TotSec32, n_vol); + } + tbl[BPB_Media] = md; /* Media descriptor */ + ST_WORD(tbl+BPB_SecPerTrk, 63); /* Number of sectors per track */ + ST_WORD(tbl+BPB_NumHeads, 255); /* Number of heads */ + ST_DWORD(tbl+BPB_HiddSec, b_vol); /* Hidden sectors */ + n = get_fattime(); /* Use current time as VSN */ + if (fmt == FS_FAT32) { + ST_DWORD(tbl+BS_VolID32, n); /* VSN */ + ST_DWORD(tbl+BPB_FATSz32, n_fat); /* Number of sectors per FAT */ + ST_DWORD(tbl+BPB_RootClus, 2); /* Root directory start cluster (2) */ + ST_WORD(tbl+BPB_FSInfo, 1); /* FSInfo record offset (VBR+1) */ + ST_WORD(tbl+BPB_BkBootSec, 6); /* Backup boot record offset (VBR+6) */ + tbl[BS_DrvNum32] = 0x80; /* Drive number */ + tbl[BS_BootSig32] = 0x29; /* Extended boot signature */ + mem_cpy(tbl+BS_VolLab32, "NO NAME " "FAT32 ", 19); /* Volume label, FAT signature */ + } else { + ST_DWORD(tbl+BS_VolID, n); /* VSN */ + ST_WORD(tbl+BPB_FATSz16, n_fat); /* Number of sectors per FAT */ + tbl[BS_DrvNum] = 0x80; /* Drive number */ + tbl[BS_BootSig] = 0x29; /* Extended boot signature */ + mem_cpy(tbl+BS_VolLab, "NO NAME " "FAT ", 19); /* Volume label, FAT signature */ + } + ST_WORD(tbl+BS_55AA, 0xAA55); /* Signature (Offset is fixed here regardless of sector size) */ + if (disk_write(pdrv, tbl, b_vol, 1) != RES_OK) /* Write it to the VBR sector */ + return FR_DISK_ERR; + if (fmt == FS_FAT32) /* Write backup VBR if needed (VBR+6) */ + disk_write(pdrv, tbl, b_vol + 6, 1); + + /* Initialize FAT area */ + wsect = b_fat; + for (i = 0; i < N_FATS; i++) { /* Initialize each FAT copy */ + mem_set(tbl, 0, SS(fs)); /* 1st sector of the FAT */ + n = md; /* Media descriptor byte */ + if (fmt != FS_FAT32) { + n |= (fmt == FS_FAT12) ? 0x00FFFF00 : 0xFFFFFF00; + ST_DWORD(tbl+0, n); /* Reserve cluster #0-1 (FAT12/16) */ + } else { + n |= 0xFFFFFF00; + ST_DWORD(tbl+0, n); /* Reserve cluster #0-1 (FAT32) */ + ST_DWORD(tbl+4, 0xFFFFFFFF); + ST_DWORD(tbl+8, 0x0FFFFFFF); /* Reserve cluster #2 for root dir */ + } + if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK) + return FR_DISK_ERR; + mem_set(tbl, 0, SS(fs)); /* Fill following FAT entries with zero */ + for (n = 1; n < n_fat; n++) { /* This loop may take a time on FAT32 volume due to many single sector writes */ + if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK) + return FR_DISK_ERR; + } + } + + /* Initialize root directory */ + i = (fmt == FS_FAT32) ? au : n_dir; + do { + if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK) + return FR_DISK_ERR; + } while (--i); + +#if _USE_ERASE /* Erase data area if needed */ + { + DWORD eb[2]; + + eb[0] = wsect; eb[1] = wsect + (n_clst - ((fmt == FS_FAT32) ? 1 : 0)) * au - 1; + disk_ioctl(pdrv, CTRL_ERASE_SECTOR, eb); + } +#endif + + /* Create FSInfo if needed */ + if (fmt == FS_FAT32) { + ST_DWORD(tbl+FSI_LeadSig, 0x41615252); + ST_DWORD(tbl+FSI_StrucSig, 0x61417272); + ST_DWORD(tbl+FSI_Free_Count, n_clst - 1); /* Number of free clusters */ + ST_DWORD(tbl+FSI_Nxt_Free, 2); /* Last allocated cluster# */ + ST_WORD(tbl+BS_55AA, 0xAA55); + disk_write(pdrv, tbl, b_vol + 1, 1); /* Write original (VBR+1) */ + disk_write(pdrv, tbl, b_vol + 7, 1); /* Write backup (VBR+7) */ + } + + return (disk_ioctl(pdrv, CTRL_SYNC, 0) == RES_OK) ? FR_OK : FR_DISK_ERR; +} + + +#if _MULTI_PARTITION == 2 +/*-----------------------------------------------------------------------*/ +/* Divide Physical Drive */ +/*-----------------------------------------------------------------------*/ + +FRESULT f_fdisk ( + BYTE pdrv, /* Physical drive number */ + const DWORD szt[], /* Pointer to the size table for each partitions */ + void* work /* Pointer to the working buffer */ +) +{ + UINT i, n, sz_cyl, tot_cyl, b_cyl, e_cyl, p_cyl; + BYTE s_hd, e_hd, *p, *buf = (BYTE*)work; + DSTATUS stat; + DWORD sz_disk, sz_part, s_part; + + + stat = disk_initialize(pdrv); + if (stat & STA_NOINIT) return FR_NOT_READY; + if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; + if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_disk)) return FR_DISK_ERR; + + /* Determine CHS in the table regardless of the drive geometry */ + for (n = 16; n < 256 && sz_disk / n / 63 > 1024; n *= 2) ; + if (n == 256) n--; + e_hd = n - 1; + sz_cyl = 63 * n; + tot_cyl = sz_disk / sz_cyl; + + /* Create partition table */ + mem_set(buf, 0, _MAX_SS); + p = buf + MBR_Table; b_cyl = 0; + for (i = 0; i < 4; i++, p += SZ_PTE) { + p_cyl = (szt[i] <= 100) ? (DWORD)tot_cyl * szt[i] / 100 : szt[i] / sz_cyl; + if (!p_cyl) continue; + s_part = (DWORD)sz_cyl * b_cyl; + sz_part = (DWORD)sz_cyl * p_cyl; + if (i == 0) { /* Exclude first track of cylinder 0 */ + s_hd = 1; + s_part += 63; sz_part -= 63; + } else { + s_hd = 0; + } + e_cyl = b_cyl + p_cyl - 1; + if (e_cyl >= tot_cyl) return FR_INVALID_PARAMETER; + + /* Set partition table */ + p[1] = s_hd; /* Start head */ + p[2] = (BYTE)((b_cyl >> 2) + 1); /* Start sector */ + p[3] = (BYTE)b_cyl; /* Start cylinder */ + p[4] = 0x06; /* System type (temporary setting) */ + p[5] = e_hd; /* End head */ + p[6] = (BYTE)((e_cyl >> 2) + 63); /* End sector */ + p[7] = (BYTE)e_cyl; /* End cylinder */ + ST_DWORD(p + 8, s_part); /* Start sector in LBA */ + ST_DWORD(p + 12, sz_part); /* Partition size */ + + /* Next partition */ + b_cyl += p_cyl; + } + ST_WORD(p, 0xAA55); + + /* Write it to the MBR */ + return (disk_write(pdrv, buf, 0, 1) || disk_ioctl(pdrv, CTRL_SYNC, 0)) ? FR_DISK_ERR : FR_OK; +} + + +#endif /* _MULTI_PARTITION == 2 */ +#endif /* _USE_MKFS && !_FS_READONLY */ + + + + +#if _USE_STRFUNC +/*-----------------------------------------------------------------------*/ +/* Get a string from the file */ +/*-----------------------------------------------------------------------*/ +TCHAR* f_gets ( + TCHAR* buff, /* Pointer to the string buffer to read */ + int len, /* Size of string buffer (characters) */ + FIL* fil /* Pointer to the file object */ +) +{ + int n = 0; + TCHAR c, *p = buff; + BYTE s[2]; + UINT rc; + + + while (n < len - 1) { /* Read bytes until buffer gets filled */ + f_read(fil, s, 1, &rc); + if (rc != 1) break; /* Break on EOF or error */ + c = s[0]; +#if _LFN_UNICODE /* Read a character in UTF-8 encoding */ + if (c >= 0x80) { + if (c < 0xC0) continue; /* Skip stray trailer */ + if (c < 0xE0) { /* Two-byte sequence */ + f_read(fil, s, 1, &rc); + if (rc != 1) break; + c = ((c & 0x1F) << 6) | (s[0] & 0x3F); + if (c < 0x80) c = '?'; + } else { + if (c < 0xF0) { /* Three-byte sequence */ + f_read(fil, s, 2, &rc); + if (rc != 2) break; + c = (c << 12) | ((s[0] & 0x3F) << 6) | (s[1] & 0x3F); + if (c < 0x800) c = '?'; + } else { /* Reject four-byte sequence */ + c = '?'; + } + } + } +#endif +#if _USE_STRFUNC >= 2 + if (c == '\r') continue; /* Strip '\r' */ +#endif + *p++ = c; + n++; + if (c == '\n') break; /* Break on EOL */ + } + *p = 0; + return n ? buff : 0; /* When no data read (eof or error), return with error. */ +} + + + +#if !_FS_READONLY +#include <stdarg.h> +/*-----------------------------------------------------------------------*/ +/* Put a character to the file */ +/*-----------------------------------------------------------------------*/ +int f_putc ( + TCHAR c, /* A character to be output */ + FIL* fil /* Pointer to the file object */ +) +{ + UINT bw, btw; + BYTE s[3]; + + +#if _USE_STRFUNC >= 2 + if (c == '\n') f_putc ('\r', fil); /* LF -> CRLF conversion */ +#endif + +#if _LFN_UNICODE /* Write the character in UTF-8 encoding */ + if (c < 0x80) { /* 7-bit */ + s[0] = (BYTE)c; + btw = 1; + } else { + if (c < 0x800) { /* 11-bit */ + s[0] = (BYTE)(0xC0 | (c >> 6)); + s[1] = (BYTE)(0x80 | (c & 0x3F)); + btw = 2; + } else { /* 16-bit */ + s[0] = (BYTE)(0xE0 | (c >> 12)); + s[1] = (BYTE)(0x80 | ((c >> 6) & 0x3F)); + s[2] = (BYTE)(0x80 | (c & 0x3F)); + btw = 3; + } + } +#else /* Write the character without conversion */ + s[0] = (BYTE)c; + btw = 1; +#endif + f_write(fil, s, btw, &bw); /* Write the char to the file */ + return (bw == btw) ? 1 : EOF; /* Return the result */ +} + + + + +/*-----------------------------------------------------------------------*/ +/* Put a string to the file */ +/*-----------------------------------------------------------------------*/ +int f_puts ( + const TCHAR* str, /* Pointer to the string to be output */ + FIL* fil /* Pointer to the file object */ +) +{ + int n; + + + for (n = 0; *str; str++, n++) { + if (f_putc(*str, fil) == EOF) return EOF; + } + return n; +} + + + + +/*-----------------------------------------------------------------------*/ +/* Put a formatted string to the file */ +/*-----------------------------------------------------------------------*/ +int f_printf ( + FIL* fil, /* Pointer to the file object */ + const TCHAR* str, /* Pointer to the format string */ + ... /* Optional arguments... */ +) +{ + va_list arp; + BYTE f, r; + UINT i, j, w; + ULONG v; + TCHAR c, d, s[16], *p; + int res, chc, cc; + + + va_start(arp, str); + + for (cc = res = 0; cc != EOF; res += cc) { + c = *str++; + if (c == 0) break; /* End of string */ + if (c != '%') { /* Non escape character */ + cc = f_putc(c, fil); + if (cc != EOF) cc = 1; + continue; + } + w = f = 0; + c = *str++; + if (c == '0') { /* Flag: '0' padding */ + f = 1; c = *str++; + } else { + if (c == '-') { /* Flag: left justified */ + f = 2; c = *str++; + } + } + while (IsDigit(c)) { /* Precision */ + w = w * 10 + c - '0'; + c = *str++; + } + if (c == 'l' || c == 'L') { /* Prefix: Size is long int */ + f |= 4; c = *str++; + } + if (!c) break; + d = c; + if (IsLower(d)) d -= 0x20; + switch (d) { /* Type is... */ + case 'S' : /* String */ + p = va_arg(arp, TCHAR*); + for (j = 0; p[j]; j++) ; + chc = 0; + if (!(f & 2)) { + while (j++ < w) chc += (cc = f_putc(' ', fil)); + } + chc += (cc = f_puts(p, fil)); + while (j++ < w) chc += (cc = f_putc(' ', fil)); + if (cc != EOF) cc = chc; + continue; + case 'C' : /* Character */ + cc = f_putc((TCHAR)va_arg(arp, int), fil); continue; + case 'B' : /* Binary */ + r = 2; break; + case 'O' : /* Octal */ + r = 8; break; + case 'D' : /* Signed decimal */ + case 'U' : /* Unsigned decimal */ + r = 10; break; + case 'X' : /* Hexdecimal */ + r = 16; break; + default: /* Unknown type (pass-through) */ + cc = f_putc(c, fil); continue; + } + + /* Get an argument and put it in numeral */ + v = (f & 4) ? (ULONG)va_arg(arp, long) : ((d == 'D') ? (ULONG)(long)va_arg(arp, int) : (ULONG)va_arg(arp, unsigned int)); + if (d == 'D' && (v & 0x80000000)) { + v = 0 - v; + f |= 8; + } + i = 0; + do { + d = (TCHAR)(v % r); v /= r; + if (d > 9) d += (c == 'x') ? 0x27 : 0x07; + s[i++] = d + '0'; + } while (v && i < sizeof s / sizeof s[0]); + if (f & 8) s[i++] = '-'; + j = i; d = (f & 1) ? '0' : ' '; + res = 0; + while (!(f & 2) && j++ < w) res += (cc = f_putc(d, fil)); + do res += (cc = f_putc(s[--i], fil)); while(i); + while (j++ < w) res += (cc = f_putc(' ', fil)); + if (cc != EOF) cc = res; + } + + va_end(arp); + return (cc == EOF) ? cc : res; +} + +#endif /* !_FS_READONLY */ +#endif /* _USE_STRFUNC */ diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/ff.h b/lib/lufa/Projects/Webserver/Lib/FATFs/ff.h new file mode 100644 index 000000000..627cbaabe --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/FATFs/ff.h @@ -0,0 +1,337 @@ +/*---------------------------------------------------------------------------/ +/ FatFs - FAT file system module include file R0.09a (C)ChaN, 2012 +/----------------------------------------------------------------------------/ +/ FatFs module is a generic FAT file system module for small embedded systems. +/ This is a free software that opened for education, research and commercial +/ developments under license policy of following terms. +/ +/ Copyright (C) 2012, ChaN, all right reserved. +/ +/ * The FatFs module is a free software and there is NO WARRANTY. +/ * No restriction on use. You can use, modify and redistribute it for +/ personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY. +/ * Redistributions of source code must retain the above copyright notice. +/ +/----------------------------------------------------------------------------*/ + +#ifndef _FATFS +#define _FATFS 4004 /* Revision ID */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "integer.h" /* Basic integer types */ +#include "ffconf.h" /* FatFs configuration options */ + +#if _FATFS != _FFCONF +#error Wrong configuration file (ffconf.h). +#endif + + + +/* Definitions of volume management */ + +#if _MULTI_PARTITION /* Multiple partition configuration */ +typedef struct { + BYTE pd; /* Physical drive number */ + BYTE pt; /* Partition: 0:Auto detect, 1-4:Forced partition) */ +} PARTITION; +extern PARTITION VolToPart[]; /* Volume - Partition resolution table */ +#define LD2PD(vol) (VolToPart[vol].pd) /* Get physical drive number */ +#define LD2PT(vol) (VolToPart[vol].pt) /* Get partition index */ + +#else /* Single partition configuration */ +#define LD2PD(vol) (BYTE)(vol) /* Each logical drive is bound to the same physical drive number */ +#define LD2PT(vol) 0 /* Always mounts the 1st partition or in SFD */ + +#endif + + + +/* Type of path name strings on FatFs API */ + +#if _LFN_UNICODE /* Unicode string */ +#if !_USE_LFN +#error _LFN_UNICODE must be 0 in non-LFN cfg. +#endif +#ifndef _INC_TCHAR +typedef WCHAR TCHAR; +#define _T(x) L ## x +#define _TEXT(x) L ## x +#endif + +#else /* ANSI/OEM string */ +#ifndef _INC_TCHAR +typedef char TCHAR; +#define _T(x) x +#define _TEXT(x) x +#endif + +#endif + + + +/* File system object structure (FATFS) */ + +typedef struct { + BYTE fs_type; /* FAT sub-type (0:Not mounted) */ + BYTE drv; /* Physical drive number */ + BYTE csize; /* Sectors per cluster (1,2,4...128) */ + BYTE n_fats; /* Number of FAT copies (1,2) */ + BYTE wflag; /* win[] dirty flag (1:must be written back) */ + BYTE fsi_flag; /* fsinfo dirty flag (1:must be written back) */ + WORD id; /* File system mount ID */ + WORD n_rootdir; /* Number of root directory entries (FAT12/16) */ +#if _MAX_SS != 512 + WORD ssize; /* Bytes per sector (512, 1024, 2048 or 4096) */ +#endif +#if _FS_REENTRANT + _SYNC_t sobj; /* Identifier of sync object */ +#endif +#if !_FS_READONLY + DWORD last_clust; /* Last allocated cluster */ + DWORD free_clust; /* Number of free clusters */ + DWORD fsi_sector; /* fsinfo sector (FAT32) */ +#endif +#if _FS_RPATH + DWORD cdir; /* Current directory start cluster (0:root) */ +#endif + DWORD n_fatent; /* Number of FAT entries (= number of clusters + 2) */ + DWORD fsize; /* Sectors per FAT */ + DWORD fatbase; /* FAT start sector */ + DWORD dirbase; /* Root directory start sector (FAT32:Cluster#) */ + DWORD database; /* Data start sector */ + DWORD winsect; /* Current sector appearing in the win[] */ + BYTE win[_MAX_SS]; /* Disk access window for Directory, FAT (and Data on tiny cfg) */ +} FATFS; + + + +/* File object structure (FIL) */ + +typedef struct { + FATFS* fs; /* Pointer to the related file system object */ + WORD id; /* File system mount ID of the related file system object */ + BYTE flag; /* File status flags */ + BYTE pad1; + DWORD fptr; /* File read/write pointer (0ed on file open) */ + DWORD fsize; /* File size */ + DWORD sclust; /* File data start cluster (0:no data cluster, always 0 when fsize is 0) */ + DWORD clust; /* Current cluster of fpter */ + DWORD dsect; /* Current data sector of fpter */ +#if !_FS_READONLY + DWORD dir_sect; /* Sector containing the directory entry */ + BYTE* dir_ptr; /* Pointer to the directory entry in the window */ +#endif +#if _USE_FASTSEEK + DWORD* cltbl; /* Pointer to the cluster link map table (null on file open) */ +#endif +#if _FS_LOCK + UINT lockid; /* File lock ID (index of file semaphore table Files[]) */ +#endif +#if !_FS_TINY + BYTE buf[_MAX_SS]; /* File data read/write buffer */ +#endif +} FIL; + + + +/* Directory object structure (DIR) */ + +typedef struct { + FATFS* fs; /* Pointer to the owner file system object */ + WORD id; /* Owner file system mount ID */ + WORD index; /* Current read/write index number */ + DWORD sclust; /* Table start cluster (0:Root dir) */ + DWORD clust; /* Current cluster */ + DWORD sect; /* Current sector */ + BYTE* dir; /* Pointer to the current SFN entry in the win[] */ + BYTE* fn; /* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */ +#if _USE_LFN + WCHAR* lfn; /* Pointer to the LFN working buffer */ + WORD lfn_idx; /* Last matched LFN index number (0xFFFF:No LFN) */ +#endif +} DIR; + + + +/* File status structure (FILINFO) */ + +typedef struct { + DWORD fsize; /* File size */ + WORD fdate; /* Last modified date */ + WORD ftime; /* Last modified time */ + BYTE fattrib; /* Attribute */ + TCHAR fname[13]; /* Short file name (8.3 format) */ +#if _USE_LFN + TCHAR* lfname; /* Pointer to the LFN buffer */ + UINT lfsize; /* Size of LFN buffer in TCHAR */ +#endif +} FILINFO; + + + +/* File function return code (FRESULT) */ + +typedef enum { + FR_OK = 0, /* (0) Succeeded */ + FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */ + FR_INT_ERR, /* (2) Assertion failed */ + FR_NOT_READY, /* (3) The physical drive cannot work */ + FR_NO_FILE, /* (4) Could not find the file */ + FR_NO_PATH, /* (5) Could not find the path */ + FR_INVALID_NAME, /* (6) The path name format is invalid */ + FR_DENIED, /* (7) Access denied due to prohibited access or directory full */ + FR_EXIST, /* (8) Access denied due to prohibited access */ + FR_INVALID_OBJECT, /* (9) The file/directory object is invalid */ + FR_WRITE_PROTECTED, /* (10) The physical drive is write protected */ + FR_INVALID_DRIVE, /* (11) The logical drive number is invalid */ + FR_NOT_ENABLED, /* (12) The volume has no work area */ + FR_NO_FILESYSTEM, /* (13) There is no valid FAT volume */ + FR_MKFS_ABORTED, /* (14) The f_mkfs() aborted due to any parameter error */ + FR_TIMEOUT, /* (15) Could not get a grant to access the volume within defined period */ + FR_LOCKED, /* (16) The operation is rejected according to the file sharing policy */ + FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */ + FR_TOO_MANY_OPEN_FILES, /* (18) Number of open files > _FS_SHARE */ + FR_INVALID_PARAMETER /* (19) Given parameter is invalid */ +} FRESULT; + + + +/*--------------------------------------------------------------*/ +/* FatFs module application interface */ + +FRESULT f_mount (BYTE, FATFS*); /* Mount/Unmount a logical drive */ +FRESULT f_open (FIL*, const TCHAR*, BYTE); /* Open or create a file */ +FRESULT f_read (FIL*, void*, UINT, UINT*); /* Read data from a file */ +FRESULT f_lseek (FIL*, DWORD); /* Move file pointer of a file object */ +FRESULT f_close (FIL*); /* Close an open file object */ +FRESULT f_opendir (DIR*, const TCHAR*); /* Open an existing directory */ +FRESULT f_readdir (DIR*, FILINFO*); /* Read a directory item */ +FRESULT f_stat (const TCHAR*, FILINFO*); /* Get file status */ +FRESULT f_write (FIL*, const void*, UINT, UINT*); /* Write data to a file */ +FRESULT f_getfree (const TCHAR*, DWORD*, FATFS**); /* Get number of free clusters on the drive */ +FRESULT f_truncate (FIL*); /* Truncate file */ +FRESULT f_sync (FIL*); /* Flush cached data of a writing file */ +FRESULT f_unlink (const TCHAR*); /* Delete an existing file or directory */ +FRESULT f_mkdir (const TCHAR*); /* Create a new directory */ +FRESULT f_chmod (const TCHAR*, BYTE, BYTE); /* Change attribute of the file/dir */ +FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change times-tamp of the file/dir */ +FRESULT f_rename (const TCHAR*, const TCHAR*); /* Rename/Move a file or directory */ +FRESULT f_chdrive (BYTE); /* Change current drive */ +FRESULT f_chdir (const TCHAR*); /* Change current directory */ +FRESULT f_getcwd (TCHAR*, UINT); /* Get current directory */ +FRESULT f_forward (FIL*, UINT(*)(const BYTE*,UINT), UINT, UINT*); /* Forward data to the stream */ +FRESULT f_mkfs (BYTE, BYTE, UINT); /* Create a file system on the drive */ +FRESULT f_fdisk (BYTE, const DWORD[], void*); /* Divide a physical drive into some partitions */ +int f_putc (TCHAR, FIL*); /* Put a character to the file */ +int f_puts (const TCHAR*, FIL*); /* Put a string to the file */ +int f_printf (FIL*, const TCHAR*, ...); /* Put a formatted string to the file */ +TCHAR* f_gets (TCHAR*, int, FIL*); /* Get a string from the file */ + +#define f_eof(fp) (((fp)->fptr == (fp)->fsize) ? 1 : 0) +#define f_error(fp) (((fp)->flag & FA__ERROR) ? 1 : 0) +#define f_tell(fp) ((fp)->fptr) +#define f_size(fp) ((fp)->fsize) + +#ifndef EOF +#define EOF (-1) +#endif + + + + +/*--------------------------------------------------------------*/ +/* Additional user defined functions */ + +/* RTC function */ +#if !_FS_READONLY +DWORD get_fattime (void); +#endif + +/* Unicode support functions */ +#if _USE_LFN /* Unicode - OEM code conversion */ +WCHAR ff_convert (WCHAR, UINT); /* OEM-Unicode bidirectional conversion */ +WCHAR ff_wtoupper (WCHAR); /* Unicode upper-case conversion */ +#if _USE_LFN == 3 /* Memory functions */ +void* ff_memalloc (UINT); /* Allocate memory block */ +void ff_memfree (void*); /* Free memory block */ +#endif +#endif + +/* Sync functions */ +#if _FS_REENTRANT +int ff_cre_syncobj (BYTE, _SYNC_t*);/* Create a sync object */ +int ff_req_grant (_SYNC_t); /* Lock sync object */ +void ff_rel_grant (_SYNC_t); /* Unlock sync object */ +int ff_del_syncobj (_SYNC_t); /* Delete a sync object */ +#endif + + + + +/*--------------------------------------------------------------*/ +/* Flags and offset address */ + + +/* File access control and file status flags (FIL.flag) */ + +#define FA_READ 0x01 +#define FA_OPEN_EXISTING 0x00 +#define FA__ERROR 0x80 + +#if !_FS_READONLY +#define FA_WRITE 0x02 +#define FA_CREATE_NEW 0x04 +#define FA_CREATE_ALWAYS 0x08 +#define FA_OPEN_ALWAYS 0x10 +#define FA__WRITTEN 0x20 +#define FA__DIRTY 0x40 +#endif + + +/* FAT sub type (FATFS.fs_type) */ + +#define FS_FAT12 1 +#define FS_FAT16 2 +#define FS_FAT32 3 + + +/* File attribute bits for directory entry */ + +#define AM_RDO 0x01 /* Read only */ +#define AM_HID 0x02 /* Hidden */ +#define AM_SYS 0x04 /* System */ +#define AM_VOL 0x08 /* Volume label */ +#define AM_LFN 0x0F /* LFN entry */ +#define AM_DIR 0x10 /* Directory */ +#define AM_ARC 0x20 /* Archive */ +#define AM_MASK 0x3F /* Mask of defined bits */ + + +/* Fast seek feature */ +#define CREATE_LINKMAP 0xFFFFFFFF + + + +/*--------------------------------*/ +/* Multi-byte word access macros */ + +#if _WORD_ACCESS == 1 /* Enable word access to the FAT structure */ +#define LD_WORD(ptr) (WORD)(*(WORD*)(BYTE*)(ptr)) +#define LD_DWORD(ptr) (DWORD)(*(DWORD*)(BYTE*)(ptr)) +#define ST_WORD(ptr,val) *(WORD*)(BYTE*)(ptr)=(WORD)(val) +#define ST_DWORD(ptr,val) *(DWORD*)(BYTE*)(ptr)=(DWORD)(val) +#else /* Use byte-by-byte access to the FAT structure */ +#define LD_WORD(ptr) (WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr)) +#define LD_DWORD(ptr) (DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr)) +#define ST_WORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8) +#define ST_DWORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24) +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* _FATFS */ diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h b/lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h new file mode 100644 index 000000000..243a20fa2 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h @@ -0,0 +1,190 @@ +/*---------------------------------------------------------------------------/ +/ FatFs - FAT file system module configuration file R0.09a (C)ChaN, 2012 +/----------------------------------------------------------------------------/ +/ +/ CAUTION! Do not forget to make clean the project after any changes to +/ the configuration options. +/ +/----------------------------------------------------------------------------*/ +#ifndef _FFCONF +#define _FFCONF 4004 /* Revision ID */ + + +/*---------------------------------------------------------------------------/ +/ Function and Buffer Configurations +/----------------------------------------------------------------------------*/ + +#define _FS_TINY 1 /* 0:Normal or 1:Tiny */ +/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system +/ object instead of the sector buffer in the individual file object for file +/ data transfer. This reduces memory consumption 512 bytes each file object. */ + + +#define _FS_READONLY 1 /* 0:Read/Write or 1:Read only */ +/* Setting _FS_READONLY to 1 defines read only configuration. This removes +/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename, +/ f_truncate and useless f_getfree. */ + + +#define _FS_MINIMIZE 2 /* 0 to 3 */ +/* The _FS_MINIMIZE option defines minimization level to remove some functions. +/ +/ 0: Full function. +/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename +/ are removed. +/ 2: f_opendir and f_readdir are removed in addition to 1. +/ 3: f_lseek is removed in addition to 2. */ + + +#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */ +/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ + + +#define _USE_MKFS 0 /* 0:Disable or 1:Enable */ +/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ + + +#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ +/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ + + +#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ +/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ + + + +/*---------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/----------------------------------------------------------------------------*/ + +#define _CODE_PAGE 932 +/* The _CODE_PAGE specifies the OEM code page to be used on the target system. +/ Incorrect setting of the code page can cause a file open failure. +/ +/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows) +/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) +/ 949 - Korean (DBCS, OEM, Windows) +/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) +/ 1250 - Central Europe (Windows) +/ 1251 - Cyrillic (Windows) +/ 1252 - Latin 1 (Windows) +/ 1253 - Greek (Windows) +/ 1254 - Turkish (Windows) +/ 1255 - Hebrew (Windows) +/ 1256 - Arabic (Windows) +/ 1257 - Baltic (Windows) +/ 1258 - Vietnam (OEM, Windows) +/ 437 - U.S. (OEM) +/ 720 - Arabic (OEM) +/ 737 - Greek (OEM) +/ 775 - Baltic (OEM) +/ 850 - Multilingual Latin 1 (OEM) +/ 858 - Multilingual Latin 1 + Euro (OEM) +/ 852 - Latin 2 (OEM) +/ 855 - Cyrillic (OEM) +/ 866 - Russian (OEM) +/ 857 - Turkish (OEM) +/ 862 - Hebrew (OEM) +/ 874 - Thai (OEM, Windows) +/ 1 - ASCII only (Valid for non LFN cfg.) +*/ + + +#define _USE_LFN 0 /* 0 to 3 */ +#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ +/* The _USE_LFN option switches the LFN support. +/ +/ 0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect. +/ 1: Enable LFN with static working buffer on the BSS. Always NOT reentrant. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN, +/ Unicode handling functions ff_convert() and ff_wtoupper() must be added +/ to the project. When enable to use heap, memory control functions +/ ff_memalloc() and ff_memfree() must be added to the project. */ + + +#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ +/* To switch the character code set on FatFs API to Unicode, +/ enable LFN feature and set _LFN_UNICODE to 1. */ + + +#define _FS_RPATH 0 /* 0 to 2 */ +/* The _FS_RPATH option configures relative path feature. +/ +/ 0: Disable relative path feature and remove related functions. +/ 1: Enable relative path. f_chdrive() and f_chdir() are available. +/ 2: f_getcwd() is available in addition to 1. +/ +/ Note that output of the f_readdir function is affected by this option. */ + + + +/*---------------------------------------------------------------------------/ +/ Physical Drive Configurations +/----------------------------------------------------------------------------*/ + +#define _VOLUMES 1 +/* Number of volumes (logical drives) to be used. */ + + +#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ +/* Maximum sector size to be handled. +/ Always set 512 for memory card and hard disk but a larger value may be +/ required for on-board flash memory, floppy disk and optical disk. +/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size +/ and GET_SECTOR_SIZE command must be implemented to the disk_ioctl function. */ + + +#define _MULTI_PARTITION 0 /* 0:Single partition, 1/2:Enable multiple partition */ +/* When set to 0, each volume is bound to the same physical drive number and +/ it can mount only first primary partition. When it is set to 1, each volume +/ is tied to the partitions listed in VolToPart[]. */ + + +#define _USE_ERASE 0 /* 0:Disable or 1:Enable */ +/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command +/ should be added to the disk_ioctl function. */ + + + +/*---------------------------------------------------------------------------/ +/ System Configurations +/----------------------------------------------------------------------------*/ + +#define _WORD_ACCESS 1 /* 0 or 1 */ +/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS +/ option defines which access method is used to the word data on the FAT volume. +/ +/ 0: Byte-by-byte access. +/ 1: Word access. Do not choose this unless following condition is met. +/ +/ When the byte order on the memory is big-endian or address miss-aligned word +/ access results incorrect behavior, the _WORD_ACCESS must be set to 0. +/ If it is not the case, the value can also be set to 1 to improve the +/ performance and code size. */ + + +/* A header file that defines sync object types on the O/S, such as +/ windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */ + +#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ +#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ +#define _SYNC_t HANDLE /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */ + +/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module. +/ +/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect. +/ 1: Enable reentrancy. Also user provided synchronization handlers, +/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj +/ function must be added to the project. */ + + +#define _FS_LOCK 0 /* 0:Disable or >=1:Enable */ +/* To enable file lock control feature, set _FS_LOCK to 1 or greater. + The value defines how many files can be opened simultaneously. */ + + +#endif /* _FFCONFIG */ + diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/integer.h b/lib/lufa/Projects/Webserver/Lib/FATFs/integer.h new file mode 100644 index 000000000..5408fe6b3 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/FATFs/integer.h @@ -0,0 +1,38 @@ +/*-------------------------------------------*/ +/* Integer type definitions for FatFs module */ +/*-------------------------------------------*/ + +#ifndef _INTEGER +#define _INTEGER + +#ifdef _WIN32 /* FatFs development platform */ + +#include <windows.h> +#include <tchar.h> + +#else /* Embedded platform */ + +/* These types must be 16-bit, 32-bit or larger integer */ +typedef int INT; +typedef unsigned int UINT; + +/* These types must be 8-bit integer */ +typedef char CHAR; +typedef unsigned char UCHAR; +typedef unsigned char BYTE; + +/* These types must be 16-bit integer */ +typedef short SHORT; +typedef unsigned short USHORT; +typedef unsigned short WORD; +typedef unsigned short WCHAR; + +/* These types must be 32-bit integer */ +typedef long LONG; +typedef unsigned long ULONG; +typedef unsigned long DWORD; + +#endif + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/HTTPServerApp.c b/lib/lufa/Projects/Webserver/Lib/HTTPServerApp.c new file mode 100644 index 000000000..ba5ce8b99 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/HTTPServerApp.c @@ -0,0 +1,284 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Simple HTTP Webserver Application. When connected to the uIP stack, + * this will serve out files to HTTP clients on port 80. + */ + +#define INCLUDE_FROM_HTTPSERVERAPP_C +#include "HTTPServerApp.h" + +/** HTTP server response header, for transmission before the page contents. This indicates to the host that a page exists at the + * given location, and gives extra connection information. + */ +const char PROGMEM HTTP200Header[] = "HTTP/1.1 200 OK\r\n" + "Server: LUFA " LUFA_VERSION_STRING "\r\n" + "Connection: close\r\n" + "MIME-version: 1.0\r\n" + "Content-Type: "; + +/** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given + * URL is invalid, and gives extra error information. + */ +const char PROGMEM HTTP404Header[] = "HTTP/1.1 404 Not Found\r\n" + "Server: LUFA " LUFA_VERSION_STRING "\r\n" + "Connection: close\r\n" + "MIME-version: 1.0\r\n" + "Content-Type: text/plain\r\n\r\n" + "Error 404: File Not Found: /"; + +/** Default filename to fetch when a directory is requested */ +const char PROGMEM DefaultDirFileName[] = "index.htm"; + +/** Default MIME type sent if no other MIME type can be determined. */ +const char PROGMEM DefaultMIMEType[] = "text/plain"; + +/** List of MIME types for each supported file extension. */ +const MIME_Type_t MIMETypes[] = + { + {.Extension = "htm", .MIMEType = "text/html"}, + {.Extension = "jpg", .MIMEType = "image/jpeg"}, + {.Extension = "gif", .MIMEType = "image/gif"}, + {.Extension = "bmp", .MIMEType = "image/bmp"}, + {.Extension = "png", .MIMEType = "image/png"}, + {.Extension = "ico", .MIMEType = "image/x-icon"}, + {.Extension = "exe", .MIMEType = "application/octet-stream"}, + {.Extension = "gz", .MIMEType = "application/x-gzip"}, + {.Extension = "zip", .MIMEType = "application/zip"}, + {.Extension = "pdf", .MIMEType = "application/pdf"}, + }; + +/** FATFs structure to hold the internal state of the FAT driver for the Dataflash contents. */ +FATFS DiskFATState; + + +/** Initialization function for the simple HTTP webserver. */ +void HTTPServerApp_Init(void) +{ + /* Listen on port 80 for HTTP connections from hosts */ + uip_listen(HTONS(HTTP_SERVER_PORT)); + + /* Mount the Dataflash disk via FatFS */ + f_mount(0, &DiskFATState); +} + +/** uIP stack application callback for the simple HTTP webserver. This function must be called each time the + * TCP/IP stack needs a TCP packet to be processed. + */ +void HTTPServerApp_Callback(void) +{ + uip_tcp_appstate_t* const AppState = &uip_conn->appstate; + + if (uip_aborted() || uip_timedout() || uip_closed()) + { + /* Lock to the closed state so that no further processing will occur on the connection */ + AppState->HTTPServer.CurrentState = WEBSERVER_STATE_Closing; + AppState->HTTPServer.NextState = WEBSERVER_STATE_Closing; + } + + if (uip_connected()) + { + /* New connection - initialize connection state values */ + AppState->HTTPServer.CurrentState = WEBSERVER_STATE_OpenRequestedFile; + AppState->HTTPServer.NextState = WEBSERVER_STATE_OpenRequestedFile; + AppState->HTTPServer.FileOpen = false; + AppState->HTTPServer.ACKedFilePos = 0; + AppState->HTTPServer.SentChunkSize = 0; + } + + if (uip_acked()) + { + /* Add the amount of ACKed file data to the total sent file bytes counter */ + AppState->HTTPServer.ACKedFilePos += AppState->HTTPServer.SentChunkSize; + + /* Progress to the next state once the current state's data has been ACKed */ + AppState->HTTPServer.CurrentState = AppState->HTTPServer.NextState; + } + + if (uip_rexmit()) + { + /* Return file pointer to the last ACKed position */ + f_lseek(&AppState->HTTPServer.FileHandle, AppState->HTTPServer.ACKedFilePos); + } + + if (uip_rexmit() || uip_acked() || uip_newdata() || uip_connected() || uip_poll()) + { + switch (AppState->HTTPServer.CurrentState) + { + case WEBSERVER_STATE_OpenRequestedFile: + HTTPServerApp_OpenRequestedFile(); + break; + case WEBSERVER_STATE_SendResponseHeader: + HTTPServerApp_SendResponseHeader(); + break; + case WEBSERVER_STATE_SendData: + HTTPServerApp_SendData(); + break; + case WEBSERVER_STATE_Closing: + /* Connection is being terminated for some reason - close file handle */ + f_close(&AppState->HTTPServer.FileHandle); + AppState->HTTPServer.FileOpen = false; + + /* If connection is not already closed, close it */ + uip_close(); + + AppState->HTTPServer.CurrentState = WEBSERVER_STATE_Closed; + AppState->HTTPServer.NextState = WEBSERVER_STATE_Closed; + break; + } + } +} + +/** HTTP Server State handler for the Request Process state. This state manages the processing of incoming HTTP + * GET requests to the server from the receiving HTTP client. + */ +static void HTTPServerApp_OpenRequestedFile(void) +{ + uip_tcp_appstate_t* const AppState = &uip_conn->appstate; + char* const AppData = (char*)uip_appdata; + + /* No HTTP header received from the client, abort processing */ + if (!(uip_newdata())) + return; + + char* RequestToken = strtok(AppData, " "); + char* RequestedFileName = strtok(NULL, " "); + + /* Must be a GET request, abort otherwise */ + if (strcmp_P(RequestToken, PSTR("GET")) != 0) + { + uip_abort(); + return; + } + + /* Copy over the requested filename */ + strlcpy(AppState->HTTPServer.FileName, &RequestedFileName[1], sizeof(AppState->HTTPServer.FileName)); + + /* Determine the length of the URI so that it can be checked to see if it is a directory */ + uint8_t FileNameLen = strlen(AppState->HTTPServer.FileName); + + /* If the URI is a directory, append the default filename */ + if ((AppState->HTTPServer.FileName[FileNameLen - 1] == '/') || !(FileNameLen)) + { + strlcpy_P(&AppState->HTTPServer.FileName[FileNameLen], DefaultDirFileName, + (sizeof(AppState->HTTPServer.FileName) - FileNameLen)); + } + + /* Try to open the file from the Dataflash disk */ + AppState->HTTPServer.FileOpen = (f_open(&AppState->HTTPServer.FileHandle, AppState->HTTPServer.FileName, + (FA_OPEN_EXISTING | FA_READ)) == FR_OK); + + /* Lock to the SendResponseHeader state until connection terminated */ + AppState->HTTPServer.CurrentState = WEBSERVER_STATE_SendResponseHeader; + AppState->HTTPServer.NextState = WEBSERVER_STATE_SendResponseHeader; +} + +/** HTTP Server State handler for the HTTP Response Header Send state. This state manages the transmission of + * the HTTP response header to the receiving HTTP client. + */ +static void HTTPServerApp_SendResponseHeader(void) +{ + uip_tcp_appstate_t* const AppState = &uip_conn->appstate; + char* const AppData = (char*)uip_appdata; + + char* Extension = strpbrk(AppState->HTTPServer.FileName, "."); + bool FoundMIMEType = false; + + /* If the file isn't already open, it wasn't found - send back a 404 error response and abort */ + if (!(AppState->HTTPServer.FileOpen)) + { + /* Copy over the HTTP 404 response header and send it to the receiving client */ + strcpy_P(AppData, HTTP404Header); + strcat(AppData, AppState->HTTPServer.FileName); + uip_send(AppData, strlen(AppData)); + + AppState->HTTPServer.NextState = WEBSERVER_STATE_Closing; + return; + } + + /* Copy over the HTTP 200 response header and send it to the receiving client */ + strcpy_P(AppData, HTTP200Header); + + /* Check to see if a MIME type for the requested file's extension was found */ + if (Extension != NULL) + { + /* Look through the MIME type list, copy over the required MIME type if found */ + for (uint8_t i = 0; i < (sizeof(MIMETypes) / sizeof(MIMETypes[0])); i++) + { + if (strcmp(&Extension[1], MIMETypes[i].Extension) == 0) + { + strcat(AppData, MIMETypes[i].MIMEType); + FoundMIMEType = true; + break; + } + } + } + + /* Check if a MIME type was found and copied to the output buffer */ + if (!(FoundMIMEType)) + { + /* MIME type not found - copy over the default MIME type */ + strcat_P(AppData, DefaultMIMEType); + } + + /* Add the end-of-line terminator and end-of-headers terminator after the MIME type */ + strcat_P(AppData, PSTR("\r\n\r\n")); + + /* Send the MIME header to the receiving client */ + uip_send(AppData, strlen(AppData)); + + /* When the MIME header is ACKed, progress to the data send stage */ + AppState->HTTPServer.NextState = WEBSERVER_STATE_SendData; +} + +/** HTTP Server State handler for the Data Send state. This state manages the transmission of file chunks + * to the receiving HTTP client. + */ +static void HTTPServerApp_SendData(void) +{ + uip_tcp_appstate_t* const AppState = &uip_conn->appstate; + char* const AppData = (char*)uip_appdata; + + /* Get the maximum segment size for the current packet */ + uint16_t MaxChunkSize = uip_mss(); + + /* Read the next chunk of data from the open file */ + f_read(&AppState->HTTPServer.FileHandle, AppData, MaxChunkSize, &AppState->HTTPServer.SentChunkSize); + + /* Send the next file chunk to the receiving client */ + uip_send(AppData, AppState->HTTPServer.SentChunkSize); + + /* Check if we are at the last chunk of the file, if so next ACK should close the connection */ + if (MaxChunkSize != AppState->HTTPServer.SentChunkSize) + AppState->HTTPServer.NextState = WEBSERVER_STATE_Closing; +} + diff --git a/lib/lufa/Projects/Webserver/Lib/HTTPServerApp.h b/lib/lufa/Projects/Webserver/Lib/HTTPServerApp.h new file mode 100644 index 000000000..11c39d87e --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/HTTPServerApp.h @@ -0,0 +1,84 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for HTTPServerApp.c. + */ + +#ifndef _HTTPSERVER_APP_H_ +#define _HTTPSERVER_APP_H_ + + /* Includes: */ + #include <avr/pgmspace.h> + #include <string.h> + + #include <LUFA/Version.h> + + #include "Config/AppConfig.h" + + #include <uip.h> + #include <ff.h> + + /* Enums: */ + /** States for each HTTP connection to the webserver. */ + enum Webserver_States_t + { + WEBSERVER_STATE_OpenRequestedFile, /**< Currently opening requested file */ + WEBSERVER_STATE_SendResponseHeader, /**< Currently sending HTTP response headers to the client */ + WEBSERVER_STATE_SendData, /**< Currently sending HTTP page data to the client */ + WEBSERVER_STATE_Closing, /**< Ready to close the connection to the client */ + WEBSERVER_STATE_Closed, /**< Connection closed after all data sent */ + }; + + /* Type Defines: */ + /** Type define for a MIME type handler. */ + typedef struct + { + char* Extension; /**< File extension (no leading '.' character) */ + char* MIMEType; /**< Appropriate MIME type to send when the extension is encountered */ + } MIME_Type_t; + + /* Macros: */ + /** TCP listen port for incoming HTTP traffic. */ + #define HTTP_SERVER_PORT 80 + + /* Function Prototypes: */ + void HTTPServerApp_Init(void); + void HTTPServerApp_Callback(void); + + #if defined(INCLUDE_FROM_HTTPSERVERAPP_C) + static void HTTPServerApp_OpenRequestedFile(void); + static void HTTPServerApp_SendResponseHeader(void); + static void HTTPServerApp_SendData(void); + #endif + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/SCSI.c b/lib/lufa/Projects/Webserver/Lib/SCSI.c new file mode 100644 index 000000000..4fbbfd60e --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/SCSI.c @@ -0,0 +1,344 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage + * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, + * which wrap around standard SCSI device commands for controlling the actual storage medium. + */ + +#define INCLUDE_FROM_SCSI_C +#include "SCSI.h" + +/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's + * features and capabilities. + */ +static const SCSI_Inquiry_Response_t InquiryData = + { + .DeviceType = DEVICE_TYPE_BLOCK, + .PeripheralQualifier = 0, + + .Removable = true, + + .Version = 0, + + .ResponseDataFormat = 2, + .NormACA = false, + .TrmTsk = false, + .AERC = false, + + .AdditionalLength = 0x1F, + + .SoftReset = false, + .CmdQue = false, + .Linked = false, + .Sync = false, + .WideBus16Bit = false, + .WideBus32Bit = false, + .RelAddr = false, + + .VendorID = "LUFA", + .ProductID = "Dataflash Disk", + .RevisionID = {'0','.','0','0'}, + }; + +/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE + * command is issued. This gives information on exactly why the last command failed to complete. + */ +static SCSI_Request_Sense_Response_t SenseData = + { + .ResponseCode = 0x70, + .AdditionalLength = 0x0A, + }; + + +/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches + * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns + * a command failure due to a ILLEGAL REQUEST. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise + */ +bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + bool CommandSuccess = false; + + /* Run the appropriate SCSI command hander function based on the passed command */ + switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) + { + case SCSI_CMD_INQUIRY: + CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); + break; + case SCSI_CMD_REQUEST_SENSE: + CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); + break; + case SCSI_CMD_READ_CAPACITY_10: + CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); + break; + case SCSI_CMD_SEND_DIAGNOSTIC: + CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); + break; + case SCSI_CMD_WRITE_10: + CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE); + break; + case SCSI_CMD_READ_10: + CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); + break; + case SCSI_CMD_MODE_SENSE_6: + CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); + break; + case SCSI_CMD_START_STOP_UNIT: + case SCSI_CMD_TEST_UNIT_READY: + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + case SCSI_CMD_VERIFY_10: + /* These commands should just succeed, no handling required */ + CommandSuccess = true; + MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; + break; + default: + /* Update the SENSE key to reflect the invalid command */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_COMMAND, + SCSI_ASENSEQ_NO_QUALIFIER); + break; + } + + /* Check if command was successfully processed */ + if (CommandSuccess) + { + SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, + SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, + SCSI_ASENSEQ_NO_QUALIFIER); + + return true; + } + + return false; +} + +/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features + * and capabilities to the host. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]); + uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData)); + + /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */ + if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) || + MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]) + { + /* Optional but unsupported bits set - update the SENSE key and fail the request */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_FIELD_IN_CDB, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL); + + /* Pad out remaining bytes with 0x00 */ + Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; + + return true; +} + +/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, + * including the error code and additional error information so that the host can determine why a command failed to complete. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; + uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData)); + + Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL); + Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; + + return true; +} + +/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity + * on the selected Logical Unit (drive), as a number of OS-sized blocks. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint32_t LastBlockAddressInLUN = (VIRTUAL_MEMORY_BLOCKS - 1); + uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE; + + Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL); + Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL); + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; + + return true; +} + +/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the + * board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is + * supported. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Check to see if the SELF TEST bit is not set */ + if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2))) + { + /* Only self-test supported - update SENSE key and fail the command */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_FIELD_IN_CDB, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + /* Check to see if all attached Dataflash ICs are functional */ + if (!(DataflashManager_CheckDataflashOperation())) + { + /* Update SENSE key with a hardware error condition and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, + SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; + + return true; +} + +/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address + * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual + * reading and writing of the data. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const bool IsDataRead) +{ + uint32_t BlockAddress; + uint16_t TotalBlocks; + + /* Check if the disk is write protected or not */ + if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, + SCSI_ASENSE_WRITE_PROTECTED, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ + BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); + + /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ + TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); + + /* Check if the block address is outside the maximum allowable value for the LUN */ + if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ + if (IsDataRead == DATA_READ) + DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); + else + DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); + + return true; +} + +/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about + * the SCSI device, as well as the device's Write Protect status. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Send an empty header response with the Write Protect flag status */ + Endpoint_Write_8(0x00); + Endpoint_Write_8(0x00); + Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00); + Endpoint_Write_8(0x00); + Endpoint_ClearIN(); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; + + return true; +} + diff --git a/lib/lufa/Projects/Webserver/Lib/SCSI.h b/lib/lufa/Projects/Webserver/Lib/SCSI.h new file mode 100644 index 000000000..8f41f63b4 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/SCSI.h @@ -0,0 +1,87 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for SCSI.c. + */ + +#ifndef _SCSI_H_ +#define _SCSI_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/pgmspace.h> + + #include <LUFA/Drivers/USB/USB.h> + + #include "../Descriptors.h" + #include "DataflashManager.h" + + /* Macros: */ + /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This + * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about + * the last command failure) in a quick and easy manner. + * + * \param[in] Key New SCSI sense key to set the sense code to + * \param[in] Acode New SCSI additional sense key to set the additional sense code to + * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to + */ + #define SCSI_SET_SENSE(Key, Acode, Aqual) do { SenseData.SenseKey = (Key); \ + SenseData.AdditionalSenseCode = (Acode); \ + SenseData.AdditionalSenseQualifier = (Aqual); } while (0) + + /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */ + #define DATA_READ true + + /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */ + #define DATA_WRITE false + + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ + #define DEVICE_TYPE_BLOCK 0x00 + + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ + #define DEVICE_TYPE_CDROM 0x05 + + /* Function Prototypes: */ + bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + + #if defined(INCLUDE_FROM_SCSI_C) + static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const bool IsDataRead); + static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + #endif + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/TELNETServerApp.c b/lib/lufa/Projects/Webserver/Lib/TELNETServerApp.c new file mode 100644 index 000000000..4500a4b78 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/TELNETServerApp.c @@ -0,0 +1,163 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * TELNET Webserver Application. When connected to the uIP stack, + * this will serve out raw TELNET to the client on port 23. + */ + +#define INCLUDE_FROM_TELNETSERVERAPP_C +#include "TELNETServerApp.h" + +#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__) + +/** Welcome message to send to a TELNET client when a connection is first made. */ +const char PROGMEM WelcomeHeader[] = "********************************************\r\n" + "* LUFA uIP Webserver (TELNET) *\r\n" + "********************************************\r\n"; + +/** Main TELNET menu, giving the user the list of available commands they may issue */ +const char PROGMEM TELNETMenu[] = "\r\n" + " == Available Commands: ==\r\n" + " c) List Active TCP Connections\r\n" + " =========================\r\n" + "\r\n>"; + +/** Header to print before the current connections are printed to the client */ +const char PROGMEM CurrentConnectionsHeader[] = "\r\n* Current TCP Connections: *\r\n"; + +/** Initialization function for the simple TELNET webserver. */ +void TELNETServerApp_Init(void) +{ + /* Listen on port 23 for TELNET connections from hosts */ + uip_listen(HTONS(TELNET_SERVER_PORT)); +} + +/** uIP stack application callback for the TELNET server. This function must be called each time the + * TCP/IP stack needs a TCP packet to be processed. + */ +void TELNETServerApp_Callback(void) +{ + uip_tcp_appstate_t* const AppState = &uip_conn->appstate; + char* const AppData = (char*)uip_appdata; + + if (uip_connected()) + { + /* New connection - initialize connection state values */ + AppState->TELNETServer.CurrentState = TELNET_STATE_SendHeader; + } + + if (uip_acked()) + { + /* Progress to the next state once the current state's data has been ACKed */ + AppState->TELNETServer.CurrentState = AppState->TELNETServer.NextState; + } + + if (uip_rexmit() || uip_acked() || uip_newdata() || uip_connected() || uip_poll()) + { + switch (AppState->TELNETServer.CurrentState) + { + case TELNET_STATE_SendHeader: + /* Copy over and send the TELNET welcome message upon first connection */ + strcpy_P(AppData, WelcomeHeader); + uip_send(AppData, strlen(AppData)); + + AppState->TELNETServer.NextState = TELNET_STATE_SendMenu; + break; + case TELNET_STATE_SendMenu: + /* Copy over and send the TELNET menu to the client */ + strcpy_P(AppData, TELNETMenu); + uip_send(AppData, strlen(AppData)); + + AppState->TELNETServer.NextState = TELNET_STATE_GetCommand; + break; + case TELNET_STATE_GetCommand: + if (!(uip_datalen())) + break; + + /* Save the issued command for later processing */ + AppState->TELNETServer.IssuedCommand = AppData[0]; + + AppState->TELNETServer.CurrentState = TELNET_STATE_SendResponse; + break; + case TELNET_STATE_SendResponse: + /* Determine which command was issued, perform command processing */ + switch (AppState->TELNETServer.IssuedCommand) + { + case 'c': + TELNETServerApp_DisplayTCPConnections(); + break; + default: + strcpy_P(AppData, PSTR("Invalid Command.\r\n")); + uip_send(AppData, strlen(AppData)); + break; + } + + AppState->TELNETServer.NextState = TELNET_STATE_SendMenu; + break; + } + } +} + +/** Sends a list of active TCP connections to the TELNET client. */ +static void TELNETServerApp_DisplayTCPConnections(void) +{ + char* const AppData = (char*)uip_appdata; + + strcpy_P(AppData, CurrentConnectionsHeader); + + uint16_t ResponseLen = strlen(AppData); + uint8_t ActiveConnCount = 0; + + /* Loop through the complete uIP TCP connections list, looking for active connections */ + for (uint8_t i = 0; i < UIP_CONNS; i++) + { + struct uip_conn* CurrConnection = &uip_conns[i]; + + /* If the connection is not closed, it is active and must be added to the out buffer */ + if (CurrConnection->tcpstateflags != UIP_CLOSED) + { + /* Add the current connection's details to the out buffer */ + ResponseLen += sprintf_P(&AppData[ResponseLen], PSTR("%u) %d.%d.%d.%d (Local Port %u <=> Remote Port %u)\r\n"), + ++ActiveConnCount, + CurrConnection->ripaddr.u8[0], + CurrConnection->ripaddr.u8[1], + CurrConnection->ripaddr.u8[2], + CurrConnection->ripaddr.u8[3], + HTONS(CurrConnection->lport), HTONS(CurrConnection->rport)); + } + } + + uip_send(AppData, ResponseLen); +} + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/TELNETServerApp.h b/lib/lufa/Projects/Webserver/Lib/TELNETServerApp.h new file mode 100644 index 000000000..67301ba09 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/TELNETServerApp.h @@ -0,0 +1,71 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for TELNETServerApp.c. + */ + +#ifndef _TELNETSERVER_APP_H_ +#define _TELNETSERVER_APP_H_ + + /* Includes: */ + #include <avr/pgmspace.h> + #include <string.h> + #include <stdio.h> + + #include <uip.h> + + #include "Config/AppConfig.h" + + /* Macros: */ + /** TCP listen port for incoming TELNET traffic. */ + #define TELNET_SERVER_PORT 23 + + /* Enums: */ + /** States for each TELNET connection to the server. */ + enum TELNET_States_t + { + TELNET_STATE_SendHeader, /**< Currently sending welcome header to the client */ + TELNET_STATE_SendMenu, /**< Currently sending the command list menu to the client */ + TELNET_STATE_GetCommand, /**< Currently waiting for a command from the client */ + TELNET_STATE_SendResponse, /**< Processing the issued command and sending a response */ + }; + + /* Function Prototypes: */ + void TELNETServerApp_Init(void); + void TELNETServerApp_Callback(void); + + #if defined(INCLUDE_FROM_TELNETSERVERAPP_C) + static void TELNETServerApp_DisplayTCPConnections(void); + #endif + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/uIPManagement.c b/lib/lufa/Projects/Webserver/Lib/uIPManagement.c new file mode 100644 index 000000000..12f6c8f9e --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uIPManagement.c @@ -0,0 +1,298 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * uIP Management functions. This file contains the functions and globals needed to maintain the uIP + * stack once an RNDIS device has been attached to the system. + */ + +#define INCLUDE_FROM_UIPMANAGEMENT_C +#include "uIPManagement.h" + +/** Connection timer, to retain the time elapsed since the last time the uIP connections were managed. */ +static struct timer ConnectionTimer; + +/** ARP timer, to retain the time elapsed since the ARP cache was last updated. */ +static struct timer ARPTimer; + +/** MAC address of the RNDIS device, when enumerated. */ +struct uip_eth_addr MACAddress; + + +/** Configures the uIP stack ready for network traffic processing. */ +void uIPManagement_Init(void) +{ + /* uIP Timing Initialization */ + clock_init(); + timer_set(&ConnectionTimer, CLOCK_SECOND / 2); + timer_set(&ARPTimer, CLOCK_SECOND * 10); + + /* uIP Stack Initialization */ + uip_init(); + uip_arp_init(); + + /* DHCP/Server IP Settings Initialization */ + if (USB_CurrentMode == USB_MODE_Device) + { + MACAddress.addr[0] = SERVER_MAC_ADDRESS[0]; + MACAddress.addr[1] = SERVER_MAC_ADDRESS[1]; + MACAddress.addr[2] = SERVER_MAC_ADDRESS[2]; + MACAddress.addr[3] = SERVER_MAC_ADDRESS[3]; + MACAddress.addr[4] = SERVER_MAC_ADDRESS[4]; + MACAddress.addr[5] = SERVER_MAC_ADDRESS[5]; + + #if defined(ENABLE_DHCP_SERVER) + DHCPServerApp_Init(); + #endif + + uip_ipaddr_t IPAddress, Netmask, GatewayIPAddress; + uip_ipaddr(&IPAddress, DEVICE_IP_ADDRESS[0], DEVICE_IP_ADDRESS[1], DEVICE_IP_ADDRESS[2], DEVICE_IP_ADDRESS[3]); + uip_ipaddr(&Netmask, DEVICE_NETMASK[0], DEVICE_NETMASK[1], DEVICE_NETMASK[2], DEVICE_NETMASK[3]); + uip_ipaddr(&GatewayIPAddress, DEVICE_GATEWAY[0], DEVICE_GATEWAY[1], DEVICE_GATEWAY[2], DEVICE_GATEWAY[3]); + uip_sethostaddr(&IPAddress); + uip_setnetmask(&Netmask); + uip_setdraddr(&GatewayIPAddress); + } + else + { + #if defined(ENABLE_DHCP_CLIENT) + DHCPClientApp_Init(); + #else + uip_ipaddr_t IPAddress, Netmask, GatewayIPAddress; + uip_ipaddr(&IPAddress, DEVICE_IP_ADDRESS[0], DEVICE_IP_ADDRESS[1], DEVICE_IP_ADDRESS[2], DEVICE_IP_ADDRESS[3]); + uip_ipaddr(&Netmask, DEVICE_NETMASK[0], DEVICE_NETMASK[1], DEVICE_NETMASK[2], DEVICE_NETMASK[3]); + uip_ipaddr(&GatewayIPAddress, DEVICE_GATEWAY[0], DEVICE_GATEWAY[1], DEVICE_GATEWAY[2], DEVICE_GATEWAY[3]); + uip_sethostaddr(&IPAddress); + uip_setnetmask(&Netmask); + uip_setdraddr(&GatewayIPAddress); + #endif + } + + /* Virtual Webserver Ethernet Address Configuration */ + uip_setethaddr(MACAddress); + + /* HTTP Webserver Initialization */ + HTTPServerApp_Init(); + + /* TELNET Server Initialization */ + #if defined(ENABLE_TELNET_SERVER) + TELNETServerApp_Init(); + #endif +} + +/** uIP Management function. This function manages the uIP stack when called while an RNDIS device has been + * attached to the system. + */ +void uIPManagement_ManageNetwork(void) +{ + if (((USB_CurrentMode == USB_MODE_Host) && (USB_HostState == HOST_STATE_Configured)) || + ((USB_CurrentMode == USB_MODE_Device) && (USB_DeviceState == DEVICE_STATE_Configured))) + { + uIPManagement_ProcessIncomingPacket(); + uIPManagement_ManageConnections(); + } +} + +/** uIP TCP/IP network stack callback function for the processing of a given TCP connection. This routine dispatches + * to the appropriate TCP protocol application based on the connection's listen port number. + */ +void uIPManagement_TCPCallback(void) +{ + /* Call the correct TCP application based on the port number the connection is listening on */ + switch (uip_conn->lport) + { + case HTONS(HTTP_SERVER_PORT): + HTTPServerApp_Callback(); + break; + #if defined(ENABLE_TELNET_SERVER) + case HTONS(TELNET_SERVER_PORT): + TELNETServerApp_Callback(); + break; + #endif + } +} + +/** uIP TCP/IP network stack callback function for the processing of a given UDP connection. This routine dispatches + * to the appropriate UDP protocol application based on the connection's listen port number. + */ +void uIPManagement_UDPCallback(void) +{ + /* Call the correct UDP application based on the port number the connection is listening on */ + switch (uip_udp_conn->lport) + { + #if defined(ENABLE_DHCP_CLIENT) + case HTONS(DHCP_CLIENT_PORT): + DHCPClientApp_Callback(); + break; + #endif + #if defined(ENABLE_DHCP_SERVER) + case HTONS(DHCP_SERVER_PORT): + DHCPServerApp_Callback(); + break; + #endif + } +} + +/** Processes Incoming packets to the server from the connected RNDIS device, creating responses as needed. */ +static void uIPManagement_ProcessIncomingPacket(void) +{ + /* Determine which USB mode the system is currently initialized in */ + if (USB_CurrentMode == USB_MODE_Device) + { + /* If no packet received, exit processing routine */ + if (!(RNDIS_Device_IsPacketReceived(&Ethernet_RNDIS_Interface_Device))) + return; + + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + + /* Read the Incoming packet straight into the UIP packet buffer */ + RNDIS_Device_ReadPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, &uip_len); + } + else + { + /* If no packet received, exit processing routine */ + if (!(RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface_Host))) + return; + + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + + /* Read the Incoming packet straight into the UIP packet buffer */ + RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, &uip_len); + } + + /* If the packet contains an Ethernet frame, process it */ + if (uip_len > 0) + { + switch (((struct uip_eth_hdr*)uip_buf)->type) + { + case HTONS(UIP_ETHTYPE_IP): + /* Filter packet by MAC destination */ + uip_arp_ipin(); + + /* Process Incoming packet */ + uip_input(); + + /* If a response was generated, send it */ + if (uip_len > 0) + { + /* Add destination MAC to outgoing packet */ + uip_arp_out(); + + uip_split_output(); + } + + break; + case HTONS(UIP_ETHTYPE_ARP): + /* Process ARP packet */ + uip_arp_arpin(); + + /* If a response was generated, send it */ + if (uip_len > 0) + uip_split_output(); + + break; + } + } + + LEDs_SetAllLEDs(LEDMASK_USB_READY); +} + +/** Manages the currently open network connections, including TCP and (if enabled) UDP. */ +static void uIPManagement_ManageConnections(void) +{ + /* Poll TCP connections for more data to send back to the host */ + for (uint8_t i = 0; i < UIP_CONNS; i++) + { + uip_poll_conn(&uip_conns[i]); + + /* If a response was generated, send it */ + if (uip_len > 0) + { + /* Add destination MAC to outgoing packet */ + uip_arp_out(); + + /* Split and send the outgoing packet */ + uip_split_output(); + } + } + + /* Manage open connections for timeouts */ + if (timer_expired(&ConnectionTimer)) + { + timer_reset(&ConnectionTimer); + + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + + for (uint8_t i = 0; i < UIP_CONNS; i++) + { + /* Run periodic connection management for each TCP connection */ + uip_periodic(i); + + /* If a response was generated, send it */ + if (uip_len > 0) + { + /* Add destination MAC to outgoing packet */ + uip_arp_out(); + + /* Split and send the outgoing packet */ + uip_split_output(); + } + } + + #if defined(ENABLE_DHCP_CLIENT) + for (uint8_t i = 0; i < UIP_UDP_CONNS; i++) + { + /* Run periodic connection management for each UDP connection */ + uip_udp_periodic(i); + + /* If a response was generated, send it */ + if (uip_len > 0) + { + /* Add destination MAC to outgoing packet */ + uip_arp_out(); + + /* Split and send the outgoing packet */ + uip_split_output(); + } + } + #endif + + LEDs_SetAllLEDs(LEDMASK_USB_READY); + } + + /* Manage ARP cache refreshing */ + if (timer_expired(&ARPTimer)) + { + timer_reset(&ARPTimer); + uip_arp_timer(); + } +} + diff --git a/lib/lufa/Projects/Webserver/Lib/uIPManagement.h b/lib/lufa/Projects/Webserver/Lib/uIPManagement.h new file mode 100644 index 000000000..3bdc5c96b --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uIPManagement.h @@ -0,0 +1,69 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for uIPManagement.c. + */ + +#ifndef _UIP_MANAGEMENT_H_ +#define _UIP_MANAGEMENT_H_ + + /* Includes: */ + #include <LUFA/Drivers/USB/USB.h> + + #include <uip.h> + #include <uip_arp.h> + #include <uip-split.h> + #include <timer.h> + + #include "Config/AppConfig.h" + + #include "DHCPClientApp.h" + #include "DHCPServerApp.h" + #include "HTTPServerApp.h" + #include "TELNETServerApp.h" + + /* External Variables: */ + extern struct uip_eth_addr MACAddress; + + /* Function Prototypes: */ + void uIPManagement_Init(void); + void uIPManagement_ManageNetwork(void); + void uIPManagement_TCPCallback(void); + void uIPManagement_UDPCallback(void); + + #if defined(INCLUDE_FROM_UIPMANAGEMENT_C) + static void uIPManagement_ProcessIncomingPacket(void); + static void uIPManagement_ManageConnections(void); + #endif + +#endif + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/clock.c b/lib/lufa/Projects/Webserver/Lib/uip/clock.c new file mode 100644 index 000000000..e71f7209d --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/clock.c @@ -0,0 +1,37 @@ +#include <stdint.h> +#include <stdlib.h> +#include <stdio.h> + +#include <LUFA/Common/Common.h> + +#include "clock.h" + +//Counted time +volatile clock_time_t clock_datetime = 0; + +//Overflow interrupt +ISR(TIMER1_COMPA_vect, ISR_BLOCK) +{ + clock_datetime += 1; +} + +//Initialise the clock +void clock_init() +{ + OCR1A = (((F_CPU / 1024) / 100) - 1); + TCCR1B = ((1 << WGM12) | (1 << CS12) | (1 << CS10)); + TIMSK1 = (1 << OCIE1A); +} + +//Return time +clock_time_t clock_time() +{ + clock_time_t time; + + GlobalInterruptDisable(); + time = clock_datetime; + GlobalInterruptEnable(); + + return time; +} + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/clock.h b/lib/lufa/Projects/Webserver/Lib/uip/clock.h new file mode 100644 index 000000000..bbfa4ac0e --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/clock.h @@ -0,0 +1,13 @@ +#ifndef __CLOCK_ARCH_H__ +#define __CLOCK_ARCH_H__ + +#include <stdint.h> +#include <util/atomic.h> + +typedef uint16_t clock_time_t; +#define CLOCK_SECOND 100 +void clock_init(void); +clock_time_t clock_time(void); + +#endif /* __CLOCK_ARCH_H__ */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/timer.c b/lib/lufa/Projects/Webserver/Lib/uip/timer.c new file mode 100644 index 000000000..eae06f43b --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/timer.c @@ -0,0 +1,128 @@ +/** + * \addtogroup timer + * @{ + */ + +/** + * \file + * Timer library implementation. + * \author + * Adam Dunkels <adam@sics.se> + */ + +/* + * Copyright (c) 2004, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack + * + * Author: Adam Dunkels <adam@sics.se> + * + * $Id: timer.c,v 1.2 2006/06/12 08:00:30 adam Exp $ + */ + +#include "clock.h" +#include "timer.h" + +/*---------------------------------------------------------------------------*/ +/** + * Set a timer. + * + * This function is used to set a timer for a time sometime in the + * future. The function timer_expired() will evaluate to true after + * the timer has expired. + * + * \param t A pointer to the timer + * \param interval The interval before the timer expires. + * + */ +void +timer_set(struct timer *t, clock_time_t interval) +{ + t->interval = interval; + t->start = clock_time(); +} +/*---------------------------------------------------------------------------*/ +/** + * Reset the timer with the same interval. + * + * This function resets the timer with the same interval that was + * given to the timer_set() function. The start point of the interval + * is the exact time that the timer last expired. Therefore, this + * function will cause the timer to be stable over time, unlike the + * timer_restart() function. + * + * \param t A pointer to the timer. + * + * \sa timer_restart() + */ +void +timer_reset(struct timer *t) +{ + t->start += t->interval; +} +/*---------------------------------------------------------------------------*/ +/** + * Restart the timer from the current point in time + * + * This function restarts a timer with the same interval that was + * given to the timer_set() function. The timer will start at the + * current time. + * + * \note A periodic timer will drift if this function is used to reset + * it. For periodic timers, use the timer_reset() function instead. + * + * \param t A pointer to the timer. + * + * \sa timer_reset() + */ +void +timer_restart(struct timer *t) +{ + t->start = clock_time(); +} +/*---------------------------------------------------------------------------*/ +/** + * Check if a timer has expired. + * + * This function tests if a timer has expired and returns true or + * false depending on its status. + * + * \param t A pointer to the timer + * + * \return Non-zero if the timer has expired, zero otherwise. + * + */ +int +timer_expired(struct timer *t) +{ + return (clock_time_t)(clock_time() - t->start) >= (clock_time_t)t->interval; +} +/*---------------------------------------------------------------------------*/ + +/** @} */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/timer.h b/lib/lufa/Projects/Webserver/Lib/uip/timer.h new file mode 100644 index 000000000..04917e4c5 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/timer.h @@ -0,0 +1,87 @@ +/** + * \defgroup timer Timer library + * + * The timer library provides functions for setting, resetting and + * restarting timers, and for checking if a timer has expired. An + * application must "manually" check if its timers have expired; this + * is not done automatically. + * + * A timer is declared as a \c struct \c timer and all access to the + * timer is made by a pointer to the declared timer. + * + * \note The timer library uses the \ref clock "Clock library" to + * measure time. Intervals should be specified in the format used by + * the clock library. + * + * @{ + */ + + +/** + * \file + * Timer library header file. + * \author + * Adam Dunkels <adam@sics.se> + */ + +/* + * Copyright (c) 2004, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack + * + * Author: Adam Dunkels <adam@sics.se> + * + * $Id: timer.h,v 1.3 2006/06/11 21:46:39 adam Exp $ + */ +#ifndef __TIMER_H__ +#define __TIMER_H__ + +#include "clock.h" + +/** + * A timer. + * + * This structure is used for declaring a timer. The timer must be set + * with timer_set() before it can be used. + * + * \hideinitializer + */ +struct timer { + clock_time_t start; + clock_time_t interval; +}; + +void timer_set(struct timer *t, clock_time_t interval); +void timer_reset(struct timer *t); +void timer_restart(struct timer *t); +int timer_expired(struct timer *t); + +#endif /* __TIMER_H__ */ + +/** @} */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uip-split.c b/lib/lufa/Projects/Webserver/Lib/uip/uip-split.c new file mode 100644 index 000000000..5222a05b6 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/uip-split.c @@ -0,0 +1,151 @@ +/* + * Copyright (c) 2004, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the Contiki operating system. + * + * Author: Adam Dunkels <adam@sics.se> + * + * $Id: uip-split.c,v 1.2 2008/10/14 13:39:12 julienabeille Exp $ + */ + +#include "uip-split.h" + + +#define BUF ((struct uip_tcpip_hdr *)&uip_buf[UIP_LLH_LEN]) + +/*-----------------------------------------------------------------------------*/ +void +uip_split_output(void) +{ +#if UIP_TCP + u16_t tcplen, len1, len2; + + /* We only try to split maximum sized TCP segments. */ + if(BUF->proto == UIP_PROTO_TCP && uip_len == UIP_BUFSIZE) { + + tcplen = uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN; + /* Split the segment in two. If the original packet length was + odd, we make the second packet one byte larger. */ + len1 = len2 = tcplen / 2; + if(len1 + len2 < tcplen) { + ++len2; + } + + /* Create the first packet. This is done by altering the length + field of the IP header and updating the checksums. */ + uip_len = len1 + UIP_TCPIP_HLEN + UIP_LLH_LEN; +#if UIP_CONF_IPV6 + /* For IPv6, the IP length field does not include the IPv6 IP header + length. */ + BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8); + BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff); +#else /* UIP_CONF_IPV6 */ + BUF->len[0] = (uip_len - UIP_LLH_LEN) >> 8; + BUF->len[1] = (uip_len - UIP_LLH_LEN) & 0xff; +#endif /* UIP_CONF_IPV6 */ + + /* Recalculate the TCP checksum. */ + BUF->tcpchksum = 0; + BUF->tcpchksum = ~(uip_tcpchksum()); + +#if !UIP_CONF_IPV6 + /* Recalculate the IP checksum. */ + BUF->ipchksum = 0; + BUF->ipchksum = ~(uip_ipchksum()); +#endif /* UIP_CONF_IPV6 */ + + /* Transmit the first packet. */ +#if UIP_CONF_IPV6 + tcpip_ipv6_output(); +#else + if (USB_CurrentMode == USB_MODE_Device) + RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, uip_len); + else + RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, uip_len); +#endif /* UIP_CONF_IPV6 */ + + /* Now, create the second packet. To do this, it is not enough to + just alter the length field, but we must also update the TCP + sequence number and point the uip_appdata to a new place in + memory. This place is determined by the length of the first + packet (len1). */ + uip_len = len2 + UIP_TCPIP_HLEN + UIP_LLH_LEN; +#if UIP_CONF_IPV6 + /* For IPv6, the IP length field does not include the IPv6 IP header + length. */ + BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8); + BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff); +#else /* UIP_CONF_IPV6 */ + BUF->len[0] = (uip_len - UIP_LLH_LEN) >> 8; + BUF->len[1] = (uip_len - UIP_LLH_LEN) & 0xff; +#endif /* UIP_CONF_IPV6 */ + + memcpy(uip_appdata, (u8_t *)uip_appdata + len1, len2); + + uip_add32(BUF->seqno, len1); + BUF->seqno[0] = uip_acc32[0]; + BUF->seqno[1] = uip_acc32[1]; + BUF->seqno[2] = uip_acc32[2]; + BUF->seqno[3] = uip_acc32[3]; + + /* Recalculate the TCP checksum. */ + BUF->tcpchksum = 0; + BUF->tcpchksum = ~(uip_tcpchksum()); + +#if !UIP_CONF_IPV6 + /* Recalculate the IP checksum. */ + BUF->ipchksum = 0; + BUF->ipchksum = ~(uip_ipchksum()); +#endif /* UIP_CONF_IPV6 */ + + /* Transmit the second packet. */ +#if UIP_CONF_IPV6 + tcpip_ipv6_output(); +#else + if (USB_CurrentMode == USB_MODE_Device) + RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, uip_len); + else + RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, uip_len); +#endif /* UIP_CONF_IPV6 */ + return; + } +#endif /* UIP_TCP */ + + /* uip_fw_output();*/ +#if UIP_CONF_IPV6 + tcpip_ipv6_output(); +#else + if (USB_CurrentMode == USB_MODE_Device) + RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, uip_len); + else + RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, uip_len); +#endif /* UIP_CONF_IPV6 */ +} + +/*-----------------------------------------------------------------------------*/ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uip-split.h b/lib/lufa/Projects/Webserver/Lib/uip/uip-split.h new file mode 100644 index 000000000..0c768ce40 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/uip-split.h @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2004, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the Contiki operating system. + * + * Author: Adam Dunkels <adam@sics.se> + * + * $Id: uip-split.h,v 1.1 2006/06/17 22:41:19 adamdunkels Exp $ + */ +/** + * \addtogroup uip + * @{ + */ + +/** + * \defgroup uipsplit uIP TCP throughput booster hack + * @{ + * + * The basic uIP TCP implementation only allows each TCP connection to + * have a single TCP segment in flight at any given time. Because of + * the delayed ACK algorithm employed by most TCP receivers, uIP's + * limit on the amount of in-flight TCP segments seriously reduces the + * maximum achievable throughput for sending data from uIP. + * + * The uip-split module is a hack which tries to remedy this + * situation. By splitting maximum sized outgoing TCP segments into + * two, the delayed ACK algorithm is not invoked at TCP + * receivers. This improves the throughput when sending data from uIP + * by orders of magnitude. + * + * The uip-split module uses the uip-fw module (uIP IP packet + * forwarding) for sending packets. Therefore, the uip-fw module must + * be set up with the appropriate network interfaces for this module + * to work. + */ + + +/** + * \file + * Module for splitting outbound TCP segments in two to avoid the + * delayed ACK throughput degradation. + * \author + * Adam Dunkels <adam@sics.se> + * + */ + +#ifndef __UIP_SPLIT_H__ +#define __UIP_SPLIT_H__ + +#include <string.h> +#include <uip.h> + +#include "../../USBHostMode.h" + +#include <LUFA/Drivers/USB/USB.h> + +/** + * Handle outgoing packets. + * + * This function inspects an outgoing packet in the uip_buf buffer and + * sends it out using the uip_fw_output() function. If the packet is a + * full-sized TCP segment it will be split into two segments and + * transmitted separately. This function should be called instead of + * the actual device driver output function, or the uip_fw_output() + * function. + * + * The headers of the outgoing packet is assumed to be in the uip_buf + * buffer and the payload is assumed to be wherever uip_appdata + * points. The length of the outgoing packet is assumed to be in the + * uip_len variable. + * + */ +void uip_split_output(void); +void uip_add32(u8_t *op32, u16_t op16); +#endif /* __UIP_SPLIT_H__ */ + +/** @} */ +/** @} */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uip.c b/lib/lufa/Projects/Webserver/Lib/uip/uip.c new file mode 100644 index 000000000..fead75775 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/uip.c @@ -0,0 +1,1941 @@ +#define DEBUG_PRINTF(...) /*printf(__VA_ARGS__)*/ + +/** + * \addtogroup uip + * @{ + */ + +/** + * \file + * The uIP TCP/IP stack code. + * \author Adam Dunkels <adam@dunkels.com> + */ + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uip.c,v 1.15 2008/10/15 08:08:32 adamdunkels Exp $ + * + */ + +/* + * uIP is a small implementation of the IP, UDP and TCP protocols (as + * well as some basic ICMP stuff). The implementation couples the IP, + * UDP, TCP and the application layers very tightly. To keep the size + * of the compiled code down, this code frequently uses the goto + * statement. While it would be possible to break the uip_process() + * function into many smaller functions, this would increase the code + * size because of the overhead of parameter passing and the fact that + * the optimizer would not be as efficient. + * + * The principle is that we have a small buffer, called the uip_buf, + * in which the device driver puts an incoming packet. The TCP/IP + * stack parses the headers in the packet, and calls the + * application. If the remote host has sent data to the application, + * this data is present in the uip_buf and the application read the + * data from there. It is up to the application to put this data into + * a byte stream if needed. The application will not be fed with data + * that is out of sequence. + * + * If the application whishes to send data to the peer, it should put + * its data into the uip_buf. The uip_appdata pointer points to the + * first available byte. The TCP/IP stack will calculate the + * checksums, and fill in the necessary header fields and finally send + * the packet back to the peer. +*/ + +#include "uip.h" +#include "uipopt.h" +#include "uip_arp.h" + +#if !UIP_CONF_IPV6 /* If UIP_CONF_IPV6 is defined, we compile the + uip6.c file instead of this one. Therefore + this #ifndef removes the entire compilation + output of the uip.c file */ + + +#if UIP_CONF_IPV6 +#include "net/uip-neighbor.h" +#endif /* UIP_CONF_IPV6 */ + +#include <string.h> + +/*---------------------------------------------------------------------------*/ +/* Variable definitions. */ + + +/* The IP address of this host. If it is defined to be fixed (by + setting UIP_FIXEDADDR to 1 in uipopt.h), the address is set + here. Otherwise, the address */ +#if UIP_FIXEDADDR > 0 +const uip_ipaddr_t uip_hostaddr = + { UIP_IPADDR0, UIP_IPADDR1, UIP_IPADDR2, UIP_IPADDR3 }; +const uip_ipaddr_t uip_draddr = + { UIP_DRIPADDR0, UIP_DRIPADDR1, UIP_DRIPADDR2, UIP_DRIPADDR3 }; +const uip_ipaddr_t uip_netmask = + { UIP_NETMASK0, UIP_NETMASK1, UIP_NETMASK2, UIP_NETMASK3 }; +#else +uip_ipaddr_t uip_hostaddr, uip_draddr, uip_netmask; +#endif /* UIP_FIXEDADDR */ + +const uip_ipaddr_t uip_broadcast_addr = +#if UIP_CONF_IPV6 + { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff } }; +#else /* UIP_CONF_IPV6 */ + { { 0xff, 0xff, 0xff, 0xff } }; +#endif /* UIP_CONF_IPV6 */ +const uip_ipaddr_t uip_all_zeroes_addr = { { 0x0, /* rest is 0 */ } }; + +#if UIP_FIXEDETHADDR +const struct uip_eth_addr uip_ethaddr = {{UIP_ETHADDR0, + UIP_ETHADDR1, + UIP_ETHADDR2, + UIP_ETHADDR3, + UIP_ETHADDR4, + UIP_ETHADDR5}}; +#else +struct uip_eth_addr uip_ethaddr = {{0,0,0,0,0,0}}; +#endif + +#ifndef UIP_CONF_EXTERNAL_BUFFER +u8_t uip_buf[UIP_BUFSIZE + 2]; /* The packet buffer that contains + incoming packets. */ +#endif /* UIP_CONF_EXTERNAL_BUFFER */ + +void *uip_appdata; /* The uip_appdata pointer points to + application data. */ +void *uip_sappdata; /* The uip_appdata pointer points to + the application data which is to + be sent. */ +#if UIP_URGDATA > 0 +void *uip_urgdata; /* The uip_urgdata pointer points to + urgent data (out-of-band data), if + present. */ +u16_t uip_urglen, uip_surglen; +#endif /* UIP_URGDATA > 0 */ + +u16_t uip_len, uip_slen; + /* The uip_len is either 8 or 16 bits, + depending on the maximum packet + size. */ + +u8_t uip_flags; /* The uip_flags variable is used for + communication between the TCP/IP stack + and the application program. */ +struct uip_conn *uip_conn; /* uip_conn always points to the current + connection. */ + +struct uip_conn uip_conns[UIP_CONNS]; + /* The uip_conns array holds all TCP + connections. */ +u16_t uip_listenports[UIP_LISTENPORTS]; + /* The uip_listenports list all currently + listening ports. */ +#if UIP_UDP +struct uip_udp_conn *uip_udp_conn; +struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS]; +#endif /* UIP_UDP */ + +static u16_t ipid; /* Ths ipid variable is an increasing + number that is used for the IP ID + field. */ + +void uip_setipid(u16_t id) { ipid = id; } + +static u8_t iss[4]; /* The iss variable is used for the TCP + initial sequence number. */ + +#if UIP_ACTIVE_OPEN +static u16_t lastport; /* Keeps track of the last port used for + a new connection. */ +#endif /* UIP_ACTIVE_OPEN */ + +/* Temporary variables. */ +u8_t uip_acc32[4]; +static u8_t c, opt; +static u16_t tmp16; + +/* Structures and definitions. */ +#define TCP_FIN 0x01 +#define TCP_SYN 0x02 +#define TCP_RST 0x04 +#define TCP_PSH 0x08 +#define TCP_ACK 0x10 +#define TCP_URG 0x20 +#define TCP_CTL 0x3f + +#define TCP_OPT_END 0 /* End of TCP options list */ +#define TCP_OPT_NOOP 1 /* "No-operation" TCP option */ +#define TCP_OPT_MSS 2 /* Maximum segment size TCP option */ + +#define TCP_OPT_MSS_LEN 4 /* Length of TCP MSS option. */ + +#define ICMP_ECHO_REPLY 0 +#define ICMP_ECHO 8 + +#define ICMP_DEST_UNREACHABLE 3 +#define ICMP_PORT_UNREACHABLE 3 + +#define ICMP6_ECHO_REPLY 129 +#define ICMP6_ECHO 128 +#define ICMP6_NEIGHBOR_SOLICITATION 135 +#define ICMP6_NEIGHBOR_ADVERTISEMENT 136 + +#define ICMP6_FLAG_S (1 << 6) + +#define ICMP6_OPTION_SOURCE_LINK_ADDRESS 1 +#define ICMP6_OPTION_TARGET_LINK_ADDRESS 2 + + +/* Macros. */ +#define BUF ((struct uip_tcpip_hdr *)&uip_buf[UIP_LLH_LEN]) +#define FBUF ((struct uip_tcpip_hdr *)&uip_reassbuf[0]) +#define ICMPBUF ((struct uip_icmpip_hdr *)&uip_buf[UIP_LLH_LEN]) +#define UDPBUF ((struct uip_udpip_hdr *)&uip_buf[UIP_LLH_LEN]) + + +#if UIP_STATISTICS == 1 +struct uip_stats uip_stat; +#define UIP_STAT(s) s +#else +#define UIP_STAT(s) +#endif /* UIP_STATISTICS == 1 */ + +#if UIP_LOGGING == 1 +#include <stdio.h> +void uip_log(char *msg); +#define UIP_LOG(m) uip_log(m) +#else +#define UIP_LOG(m) +#endif /* UIP_LOGGING == 1 */ + +#if ! UIP_ARCH_ADD32 +void +uip_add32(u8_t *op32, u16_t op16) +{ + uip_acc32[3] = op32[3] + (op16 & 0xff); + uip_acc32[2] = op32[2] + (op16 >> 8); + uip_acc32[1] = op32[1]; + uip_acc32[0] = op32[0]; + + if(uip_acc32[2] < (op16 >> 8)) { + ++uip_acc32[1]; + if(uip_acc32[1] == 0) { + ++uip_acc32[0]; + } + } + + + if(uip_acc32[3] < (op16 & 0xff)) { + ++uip_acc32[2]; + if(uip_acc32[2] == 0) { + ++uip_acc32[1]; + if(uip_acc32[1] == 0) { + ++uip_acc32[0]; + } + } + } +} + +#endif /* UIP_ARCH_ADD32 */ + +#if ! UIP_ARCH_CHKSUM +/*---------------------------------------------------------------------------*/ +static u16_t +chksum(u16_t sum, const u8_t *data, u16_t len) +{ + u16_t t; + const u8_t *dataptr; + const u8_t *last_byte; + + dataptr = data; + last_byte = data + len - 1; + + while(dataptr < last_byte) { /* At least two more bytes */ + t = (dataptr[0] << 8) + dataptr[1]; + sum += t; + if(sum < t) { + sum++; /* carry */ + } + dataptr += 2; + } + + if(dataptr == last_byte) { + t = (dataptr[0] << 8) + 0; + sum += t; + if(sum < t) { + sum++; /* carry */ + } + } + + /* Return sum in host byte order. */ + return sum; +} +/*---------------------------------------------------------------------------*/ +u16_t +uip_chksum(u16_t *data, u16_t len) +{ + return htons(chksum(0, (u8_t *)data, len)); +} +/*---------------------------------------------------------------------------*/ +#ifndef UIP_ARCH_IPCHKSUM +u16_t +uip_ipchksum(void) +{ + u16_t sum; + + sum = chksum(0, &uip_buf[UIP_LLH_LEN], UIP_IPH_LEN); + DEBUG_PRINTF("uip_ipchksum: sum 0x%04x\n", sum); + return (sum == 0) ? 0xffff : htons(sum); +} +#endif +/*---------------------------------------------------------------------------*/ +static u16_t +upper_layer_chksum(u8_t proto) +{ + u16_t upper_layer_len; + u16_t sum; + +#if UIP_CONF_IPV6 + upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]); +#else /* UIP_CONF_IPV6 */ + upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN; +#endif /* UIP_CONF_IPV6 */ + + /* First sum pseudo-header. */ + + /* IP protocol and length fields. This addition cannot carry. */ + sum = upper_layer_len + proto; + /* Sum IP source and destination addresses. */ + sum = chksum(sum, (u8_t *)&BUF->srcipaddr, 2 * sizeof(uip_ipaddr_t)); + + /* Sum TCP header and data. */ + sum = chksum(sum, &uip_buf[UIP_IPH_LEN + UIP_LLH_LEN], + upper_layer_len); + + return (sum == 0) ? 0xffff : htons(sum); +} +/*---------------------------------------------------------------------------*/ +#if UIP_CONF_IPV6 +u16_t +uip_icmp6chksum(void) +{ + return upper_layer_chksum(UIP_PROTO_ICMP6); + +} +#endif /* UIP_CONF_IPV6 */ +/*---------------------------------------------------------------------------*/ +u16_t +uip_tcpchksum(void) +{ + return upper_layer_chksum(UIP_PROTO_TCP); +} +/*---------------------------------------------------------------------------*/ +#if UIP_UDP_CHECKSUMS +u16_t +uip_udpchksum(void) +{ + return upper_layer_chksum(UIP_PROTO_UDP); +} +#endif /* UIP_UDP_CHECKSUMS */ +#endif /* UIP_ARCH_CHKSUM */ +/*---------------------------------------------------------------------------*/ +void +uip_init(void) +{ + for(c = 0; c < UIP_LISTENPORTS; ++c) { + uip_listenports[c] = 0; + } + for(c = 0; c < UIP_CONNS; ++c) { + uip_conns[c].tcpstateflags = UIP_CLOSED; + } +#if UIP_ACTIVE_OPEN + lastport = 1024; +#endif /* UIP_ACTIVE_OPEN */ + +#if UIP_UDP + for(c = 0; c < UIP_UDP_CONNS; ++c) { + uip_udp_conns[c].lport = 0; + } +#endif /* UIP_UDP */ + + + /* IPv4 initialization. */ +#if UIP_FIXEDADDR == 0 + /* uip_hostaddr[0] = uip_hostaddr[1] = 0;*/ +#endif /* UIP_FIXEDADDR */ + +} +/*---------------------------------------------------------------------------*/ +#if UIP_ACTIVE_OPEN +struct uip_conn * +uip_connect(uip_ipaddr_t *ripaddr, u16_t rport) +{ + register struct uip_conn *conn, *cconn; + + /* Find an unused local port. */ + again: + ++lastport; + + if(lastport >= 32000) { + lastport = 4096; + } + + /* Check if this port is already in use, and if so try to find + another one. */ + for(c = 0; c < UIP_CONNS; ++c) { + conn = &uip_conns[c]; + if(conn->tcpstateflags != UIP_CLOSED && + conn->lport == htons(lastport)) { + goto again; + } + } + + conn = 0; + for(c = 0; c < UIP_CONNS; ++c) { + cconn = &uip_conns[c]; + if(cconn->tcpstateflags == UIP_CLOSED) { + conn = cconn; + break; + } + if(cconn->tcpstateflags == UIP_TIME_WAIT) { + if(conn == 0 || + cconn->timer > conn->timer) { + conn = cconn; + } + } + } + + if(conn == 0) { + return 0; + } + + conn->tcpstateflags = UIP_SYN_SENT; + + conn->snd_nxt[0] = iss[0]; + conn->snd_nxt[1] = iss[1]; + conn->snd_nxt[2] = iss[2]; + conn->snd_nxt[3] = iss[3]; + + conn->initialmss = conn->mss = UIP_TCP_MSS; + + conn->len = 1; /* TCP length of the SYN is one. */ + conn->nrtx = 0; + conn->timer = 1; /* Send the SYN next time around. */ + conn->rto = UIP_RTO; + conn->sa = 0; + conn->sv = 16; /* Initial value of the RTT variance. */ + conn->lport = htons(lastport); + conn->rport = rport; + uip_ipaddr_copy(&conn->ripaddr, ripaddr); + + return conn; +} +#endif /* UIP_ACTIVE_OPEN */ +/*---------------------------------------------------------------------------*/ +#if UIP_UDP +struct uip_udp_conn * +uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport) +{ + register struct uip_udp_conn *conn; + + /* Find an unused local port. */ + again: + ++lastport; + + if(lastport >= 32000) { + lastport = 4096; + } + + for(c = 0; c < UIP_UDP_CONNS; ++c) { + if(uip_udp_conns[c].lport == htons(lastport)) { + goto again; + } + } + + + conn = 0; + for(c = 0; c < UIP_UDP_CONNS; ++c) { + if(uip_udp_conns[c].lport == 0) { + conn = &uip_udp_conns[c]; + break; + } + } + + if(conn == 0) { + return 0; + } + + conn->lport = HTONS(lastport); + conn->rport = rport; + if(ripaddr == NULL) { + memset(&conn->ripaddr, 0, sizeof(uip_ipaddr_t)); + } else { + uip_ipaddr_copy(&conn->ripaddr, ripaddr); + } + conn->ttl = UIP_TTL; + + return conn; +} +#endif /* UIP_UDP */ +/*---------------------------------------------------------------------------*/ +void +uip_unlisten(u16_t port) +{ + for(c = 0; c < UIP_LISTENPORTS; ++c) { + if(uip_listenports[c] == port) { + uip_listenports[c] = 0; + return; + } + } +} +/*---------------------------------------------------------------------------*/ +void +uip_listen(u16_t port) +{ + for(c = 0; c < UIP_LISTENPORTS; ++c) { + if(uip_listenports[c] == 0) { + uip_listenports[c] = port; + return; + } + } +} +/*---------------------------------------------------------------------------*/ +/* XXX: IP fragment reassembly: not well-tested. */ + +#if UIP_REASSEMBLY && !UIP_CONF_IPV6 +#define UIP_REASS_BUFSIZE (UIP_BUFSIZE - UIP_LLH_LEN) +static u8_t uip_reassbuf[UIP_REASS_BUFSIZE]; +static u8_t uip_reassbitmap[UIP_REASS_BUFSIZE / (8 * 8)]; +static const u8_t bitmap_bits[8] = {0xff, 0x7f, 0x3f, 0x1f, + 0x0f, 0x07, 0x03, 0x01}; +static u16_t uip_reasslen; +static u8_t uip_reassflags; +#define UIP_REASS_FLAG_LASTFRAG 0x01 +static u8_t uip_reasstmr; + +#define IP_MF 0x20 + +static u8_t +uip_reass(void) +{ + u16_t offset, len; + u16_t i; + + /* If ip_reasstmr is zero, no packet is present in the buffer, so we + write the IP header of the fragment into the reassembly + buffer. The timer is updated with the maximum age. */ + if(uip_reasstmr == 0) { + memcpy(uip_reassbuf, &BUF->vhl, UIP_IPH_LEN); + uip_reasstmr = UIP_REASS_MAXAGE; + uip_reassflags = 0; + /* Clear the bitmap. */ + memset(uip_reassbitmap, 0, sizeof(uip_reassbitmap)); + } + + /* Check if the incoming fragment matches the one currently present + in the reasembly buffer. If so, we proceed with copying the + fragment into the buffer. */ + if(BUF->srcipaddr[0] == FBUF->srcipaddr[0] && + BUF->srcipaddr[1] == FBUF->srcipaddr[1] && + BUF->destipaddr[0] == FBUF->destipaddr[0] && + BUF->destipaddr[1] == FBUF->destipaddr[1] && + BUF->ipid[0] == FBUF->ipid[0] && + BUF->ipid[1] == FBUF->ipid[1]) { + + len = (BUF->len[0] << 8) + BUF->len[1] - (BUF->vhl & 0x0f) * 4; + offset = (((BUF->ipoffset[0] & 0x3f) << 8) + BUF->ipoffset[1]) * 8; + + /* If the offset or the offset + fragment length overflows the + reassembly buffer, we discard the entire packet. */ + if(offset > UIP_REASS_BUFSIZE || + offset + len > UIP_REASS_BUFSIZE) { + uip_reasstmr = 0; + goto nullreturn; + } + + /* Copy the fragment into the reassembly buffer, at the right + offset. */ + memcpy(&uip_reassbuf[UIP_IPH_LEN + offset], + (char *)BUF + (int)((BUF->vhl & 0x0f) * 4), + len); + + /* Update the bitmap. */ + if(offset / (8 * 8) == (offset + len) / (8 * 8)) { + /* If the two endpoints are in the same byte, we only update + that byte. */ + + uip_reassbitmap[offset / (8 * 8)] |= + bitmap_bits[(offset / 8 ) & 7] & + ~bitmap_bits[((offset + len) / 8 ) & 7]; + } else { + /* If the two endpoints are in different bytes, we update the + bytes in the endpoints and fill the stuff in-between with + 0xff. */ + uip_reassbitmap[offset / (8 * 8)] |= + bitmap_bits[(offset / 8 ) & 7]; + for(i = 1 + offset / (8 * 8); i < (offset + len) / (8 * 8); ++i) { + uip_reassbitmap[i] = 0xff; + } + uip_reassbitmap[(offset + len) / (8 * 8)] |= + ~bitmap_bits[((offset + len) / 8 ) & 7]; + } + + /* If this fragment has the More Fragments flag set to zero, we + know that this is the last fragment, so we can calculate the + size of the entire packet. We also set the + IP_REASS_FLAG_LASTFRAG flag to indicate that we have received + the final fragment. */ + + if((BUF->ipoffset[0] & IP_MF) == 0) { + uip_reassflags |= UIP_REASS_FLAG_LASTFRAG; + uip_reasslen = offset + len; + } + + /* Finally, we check if we have a full packet in the buffer. We do + this by checking if we have the last fragment and if all bits + in the bitmap are set. */ + if(uip_reassflags & UIP_REASS_FLAG_LASTFRAG) { + /* Check all bytes up to and including all but the last byte in + the bitmap. */ + for(i = 0; i < uip_reasslen / (8 * 8) - 1; ++i) { + if(uip_reassbitmap[i] != 0xff) { + goto nullreturn; + } + } + /* Check the last byte in the bitmap. It should contain just the + right amount of bits. */ + if(uip_reassbitmap[uip_reasslen / (8 * 8)] != + (u8_t)~bitmap_bits[uip_reasslen / 8 & 7]) { + goto nullreturn; + } + + /* If we have come this far, we have a full packet in the + buffer, so we allocate a pbuf and copy the packet into it. We + also reset the timer. */ + uip_reasstmr = 0; + memcpy(BUF, FBUF, uip_reasslen); + + /* Pretend to be a "normal" (i.e., not fragmented) IP packet + from now on. */ + BUF->ipoffset[0] = BUF->ipoffset[1] = 0; + BUF->len[0] = uip_reasslen >> 8; + BUF->len[1] = uip_reasslen & 0xff; + BUF->ipchksum = 0; + BUF->ipchksum = ~(uip_ipchksum()); + + return uip_reasslen; + } + } + + nullreturn: + return 0; +} +#endif /* UIP_REASSEMBLY */ +/*---------------------------------------------------------------------------*/ +static void +uip_add_rcv_nxt(u16_t n) +{ + uip_add32(uip_conn->rcv_nxt, n); + uip_conn->rcv_nxt[0] = uip_acc32[0]; + uip_conn->rcv_nxt[1] = uip_acc32[1]; + uip_conn->rcv_nxt[2] = uip_acc32[2]; + uip_conn->rcv_nxt[3] = uip_acc32[3]; +} +/*---------------------------------------------------------------------------*/ +void +uip_process(u8_t flag) +{ + register struct uip_conn *uip_connr = uip_conn; + +#if UIP_UDP + if(flag == UIP_UDP_SEND_CONN) { + goto udp_send; + } +#endif /* UIP_UDP */ + + uip_sappdata = uip_appdata = &uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN]; + + /* Check if we were invoked because of a poll request for a + particular connection. */ + if(flag == UIP_POLL_REQUEST) { + if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED && + !uip_outstanding(uip_connr)) { + uip_len = uip_slen = 0; + uip_flags = UIP_POLL; + UIP_APPCALL(); + goto appsend; + } + goto drop; + + /* Check if we were invoked because of the periodic timer firing. */ + } else if(flag == UIP_TIMER) { +#if UIP_REASSEMBLY + if(uip_reasstmr != 0) { + --uip_reasstmr; + } +#endif /* UIP_REASSEMBLY */ + /* Increase the initial sequence number. */ + if(++iss[3] == 0) { + if(++iss[2] == 0) { + if(++iss[1] == 0) { + ++iss[0]; + } + } + } + + /* Reset the length variables. */ + uip_len = 0; + uip_slen = 0; + + /* Check if the connection is in a state in which we simply wait + for the connection to time out. If so, we increase the + connection's timer and remove the connection if it times + out. */ + if(uip_connr->tcpstateflags == UIP_TIME_WAIT || + uip_connr->tcpstateflags == UIP_FIN_WAIT_2) { + ++(uip_connr->timer); + if(uip_connr->timer == UIP_TIME_WAIT_TIMEOUT) { + uip_connr->tcpstateflags = UIP_CLOSED; + } + } else if(uip_connr->tcpstateflags != UIP_CLOSED) { + /* If the connection has outstanding data, we increase the + connection's timer and see if it has reached the RTO value + in which case we retransmit. */ + if(uip_outstanding(uip_connr)) { + if(uip_connr->timer-- == 0) { + if(uip_connr->nrtx == UIP_MAXRTX || + ((uip_connr->tcpstateflags == UIP_SYN_SENT || + uip_connr->tcpstateflags == UIP_SYN_RCVD) && + uip_connr->nrtx == UIP_MAXSYNRTX)) { + uip_connr->tcpstateflags = UIP_CLOSED; + + /* We call UIP_APPCALL() with uip_flags set to + UIP_TIMEDOUT to inform the application that the + connection has timed out. */ + uip_flags = UIP_TIMEDOUT; + UIP_APPCALL(); + + /* We also send a reset packet to the remote host. */ + BUF->flags = TCP_RST | TCP_ACK; + goto tcp_send_nodata; + } + + /* Exponential back-off. */ + uip_connr->timer = UIP_RTO << (uip_connr->nrtx > 4? + 4: + uip_connr->nrtx); + ++(uip_connr->nrtx); + + /* Ok, so we need to retransmit. We do this differently + depending on which state we are in. In ESTABLISHED, we + call upon the application so that it may prepare the + data for the retransmit. In SYN_RCVD, we resend the + SYNACK that we sent earlier and in LAST_ACK we have to + retransmit our FINACK. */ + UIP_STAT(++uip_stat.tcp.rexmit); + switch(uip_connr->tcpstateflags & UIP_TS_MASK) { + case UIP_SYN_RCVD: + /* In the SYN_RCVD state, we should retransmit our + SYNACK. */ + goto tcp_send_synack; + +#if UIP_ACTIVE_OPEN + case UIP_SYN_SENT: + /* In the SYN_SENT state, we retransmit out SYN. */ + BUF->flags = 0; + goto tcp_send_syn; +#endif /* UIP_ACTIVE_OPEN */ + + case UIP_ESTABLISHED: + /* In the ESTABLISHED state, we call upon the application + to do the actual retransmit after which we jump into + the code for sending out the packet (the apprexmit + label). */ + uip_flags = UIP_REXMIT; + UIP_APPCALL(); + goto apprexmit; + + case UIP_FIN_WAIT_1: + case UIP_CLOSING: + case UIP_LAST_ACK: + /* In all these states we should retransmit a FINACK. */ + goto tcp_send_finack; + + } + } + } else if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED) { + /* If there was no need for a retransmission, we poll the + application for new data. */ + uip_len = uip_slen = 0; + uip_flags = UIP_POLL; + UIP_APPCALL(); + goto appsend; + } + } + goto drop; + } +#if UIP_UDP + if(flag == UIP_UDP_TIMER) { + if(uip_udp_conn->lport != 0) { + uip_conn = NULL; + uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN]; + uip_len = uip_slen = 0; + uip_flags = UIP_POLL; + UIP_UDP_APPCALL(); + goto udp_send; + } else { + goto drop; + } + } +#endif + + /* This is where the input processing starts. */ + UIP_STAT(++uip_stat.ip.recv); + + /* Start of IP input header processing code. */ + +#if UIP_CONF_IPV6 + /* Check validity of the IP header. */ + if((BUF->vtc & 0xf0) != 0x60) { /* IP version and header length. */ + UIP_STAT(++uip_stat.ip.drop); + UIP_STAT(++uip_stat.ip.vhlerr); + UIP_LOG("ipv6: invalid version."); + goto drop; + } +#else /* UIP_CONF_IPV6 */ + /* Check validity of the IP header. */ + if(BUF->vhl != 0x45) { /* IP version and header length. */ + UIP_STAT(++uip_stat.ip.drop); + UIP_STAT(++uip_stat.ip.vhlerr); + UIP_LOG("ip: invalid version or header length."); + goto drop; + } +#endif /* UIP_CONF_IPV6 */ + + /* Check the size of the packet. If the size reported to us in + uip_len is smaller the size reported in the IP header, we assume + that the packet has been corrupted in transit. If the size of + uip_len is larger than the size reported in the IP packet header, + the packet has been padded and we set uip_len to the correct + value.. */ + + if((BUF->len[0] << 8) + BUF->len[1] <= uip_len) { + uip_len = (BUF->len[0] << 8) + BUF->len[1]; +#if UIP_CONF_IPV6 + uip_len += 40; /* The length reported in the IPv6 header is the + length of the payload that follows the + header. However, uIP uses the uip_len variable + for holding the size of the entire packet, + including the IP header. For IPv4 this is not a + problem as the length field in the IPv4 header + contains the length of the entire packet. But + for IPv6 we need to add the size of the IPv6 + header (40 bytes). */ +#endif /* UIP_CONF_IPV6 */ + } else { + UIP_LOG("ip: packet shorter than reported in IP header."); + goto drop; + } + +#if !UIP_CONF_IPV6 + /* Check the fragment flag. */ + if((BUF->ipoffset[0] & 0x3f) != 0 || + BUF->ipoffset[1] != 0) { +#if UIP_REASSEMBLY + uip_len = uip_reass(); + if(uip_len == 0) { + goto drop; + } +#else /* UIP_REASSEMBLY */ + UIP_STAT(++uip_stat.ip.drop); + UIP_STAT(++uip_stat.ip.fragerr); + UIP_LOG("ip: fragment dropped."); + goto drop; +#endif /* UIP_REASSEMBLY */ + } +#endif /* UIP_CONF_IPV6 */ + + if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) { + /* If we are configured to use ping IP address configuration and + hasn't been assigned an IP address yet, we accept all ICMP + packets. */ +#if UIP_PINGADDRCONF && !UIP_CONF_IPV6 + if(BUF->proto == UIP_PROTO_ICMP) { + UIP_LOG("ip: possible ping config packet received."); + goto icmp_input; + } else { + UIP_LOG("ip: packet dropped since no address assigned."); + goto drop; + } +#endif /* UIP_PINGADDRCONF */ + + } else { + /* If IP broadcast support is configured, we check for a broadcast + UDP packet, which may be destined to us. */ +#if UIP_BROADCAST + DEBUG_PRINTF("UDP IP checksum 0x%04x\n", uip_ipchksum()); + if(BUF->proto == UIP_PROTO_UDP && + uip_ipaddr_cmp(&BUF->destipaddr, &uip_broadcast_addr)) + { + if (uip_ipaddr_cmp(&BUF->srcipaddr, &uip_all_zeroes_addr)) + uip_ipaddr_copy(&BUF->srcipaddr, &uip_broadcast_addr); + + goto udp_input; + } +#endif /* UIP_BROADCAST */ + + /* Check if the packet is destined for our IP address. */ +#if !UIP_CONF_IPV6 + if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr)) { + UIP_STAT(++uip_stat.ip.drop); + goto drop; + } +#else /* UIP_CONF_IPV6 */ + /* For IPv6, packet reception is a little trickier as we need to + make sure that we listen to certain multicast addresses (all + hosts multicast address, and the solicited-node multicast + address) as well. However, we will cheat here and accept all + multicast packets that are sent to the ff02::/16 addresses. */ + if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr) && + BUF->destipaddr.u16[0] != HTONS(0xff02)) { + UIP_STAT(++uip_stat.ip.drop); + goto drop; + } +#endif /* UIP_CONF_IPV6 */ + } + +#if !UIP_CONF_IPV6 + if(uip_ipchksum() != 0xffff) { /* Compute and check the IP header + checksum. */ + UIP_STAT(++uip_stat.ip.drop); + UIP_STAT(++uip_stat.ip.chkerr); + UIP_LOG("ip: bad checksum."); + goto drop; + } +#endif /* UIP_CONF_IPV6 */ + + if(BUF->proto == UIP_PROTO_TCP) { /* Check for TCP packet. If so, + proceed with TCP input + processing. */ + goto tcp_input; + } + +#if UIP_UDP + if(BUF->proto == UIP_PROTO_UDP) { + goto udp_input; + } +#endif /* UIP_UDP */ + +#if !UIP_CONF_IPV6 + /* ICMPv4 processing code follows. */ + if(BUF->proto != UIP_PROTO_ICMP) { /* We only allow ICMP packets from + here. */ + UIP_STAT(++uip_stat.ip.drop); + UIP_STAT(++uip_stat.ip.protoerr); + UIP_LOG("ip: neither tcp nor icmp."); + goto drop; + } + +#if UIP_PINGADDRCONF + icmp_input: +#endif /* UIP_PINGADDRCONF */ + UIP_STAT(++uip_stat.icmp.recv); + + /* ICMP echo (i.e., ping) processing. This is simple, we only change + the ICMP type from ECHO to ECHO_REPLY and adjust the ICMP + checksum before we return the packet. */ + if(ICMPBUF->type != ICMP_ECHO) { + UIP_STAT(++uip_stat.icmp.drop); + UIP_STAT(++uip_stat.icmp.typeerr); + UIP_LOG("icmp: not icmp echo."); + goto drop; + } + + /* If we are configured to use ping IP address assignment, we use + the destination IP address of this ping packet and assign it to + yourself. */ +#if UIP_PINGADDRCONF + if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) { + uip_hostaddr = BUF->destipaddr; + } +#endif /* UIP_PINGADDRCONF */ + + ICMPBUF->type = ICMP_ECHO_REPLY; + + if(ICMPBUF->icmpchksum >= HTONS(0xffff - (ICMP_ECHO << 8))) { + ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8) + 1; + } else { + ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8); + } + + /* Swap IP addresses. */ + uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr); + uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr); + + UIP_STAT(++uip_stat.icmp.sent); + BUF->ttl = UIP_TTL; + goto ip_send_nolen; + + /* End of IPv4 input header processing code. */ +#else /* !UIP_CONF_IPV6 */ + + /* This is IPv6 ICMPv6 processing code. */ + DEBUG_PRINTF("icmp6_input: length %d\n", uip_len); + + if(BUF->proto != UIP_PROTO_ICMP6) { /* We only allow ICMPv6 packets from + here. */ + UIP_STAT(++uip_stat.ip.drop); + UIP_STAT(++uip_stat.ip.protoerr); + UIP_LOG("ip: neither tcp nor icmp6."); + goto drop; + } + + UIP_STAT(++uip_stat.icmp.recv); + + /* If we get a neighbor solicitation for our address we should send + a neighbor advertisement message back. */ + if(ICMPBUF->type == ICMP6_NEIGHBOR_SOLICITATION) { + if(uip_ipaddr_cmp(&ICMPBUF->icmp6data, &uip_hostaddr)) { + + if(ICMPBUF->options[0] == ICMP6_OPTION_SOURCE_LINK_ADDRESS) { + /* Save the sender's address in our neighbor list. */ + uip_neighbor_add(&ICMPBUF->srcipaddr, &(ICMPBUF->options[2])); + } + + /* We should now send a neighbor advertisement back to where the + neighbor solicitation came from. */ + ICMPBUF->type = ICMP6_NEIGHBOR_ADVERTISEMENT; + ICMPBUF->flags = ICMP6_FLAG_S; /* Solicited flag. */ + + ICMPBUF->reserved1 = ICMPBUF->reserved2 = ICMPBUF->reserved3 = 0; + + uip_ipaddr_copy(&ICMPBUF->destipaddr, &ICMPBUF->srcipaddr); + uip_ipaddr_copy(&ICMPBUF->srcipaddr, &uip_hostaddr); + ICMPBUF->options[0] = ICMP6_OPTION_TARGET_LINK_ADDRESS; + ICMPBUF->options[1] = 1; /* Options length, 1 = 8 bytes. */ + memcpy(&(ICMPBUF->options[2]), &uip_ethaddr, sizeof(uip_ethaddr)); + ICMPBUF->icmpchksum = 0; + ICMPBUF->icmpchksum = ~uip_icmp6chksum(); + + goto send; + + } + goto drop; + } else if(ICMPBUF->type == ICMP6_ECHO) { + /* ICMP echo (i.e., ping) processing. This is simple, we only + change the ICMP type from ECHO to ECHO_REPLY and update the + ICMP checksum before we return the packet. */ + + ICMPBUF->type = ICMP6_ECHO_REPLY; + + uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr); + uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr); + ICMPBUF->icmpchksum = 0; + ICMPBUF->icmpchksum = ~uip_icmp6chksum(); + + UIP_STAT(++uip_stat.icmp.sent); + goto send; + } else { + DEBUG_PRINTF("Unknown icmp6 message type %d\n", ICMPBUF->type); + UIP_STAT(++uip_stat.icmp.drop); + UIP_STAT(++uip_stat.icmp.typeerr); + UIP_LOG("icmp: unknown ICMP message."); + goto drop; + } + + /* End of IPv6 ICMP processing. */ + +#endif /* !UIP_CONF_IPV6 */ + +#if UIP_UDP + /* UDP input processing. */ + udp_input: + /* UDP processing is really just a hack. We don't do anything to the + UDP/IP headers, but let the UDP application do all the hard + work. If the application sets uip_slen, it has a packet to + send. */ +#if UIP_UDP_CHECKSUMS + uip_len = uip_len - UIP_IPUDPH_LEN; + uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN]; + if(UDPBUF->udpchksum != 0 && uip_udpchksum() != 0xffff) { + UIP_STAT(++uip_stat.udp.drop); + UIP_STAT(++uip_stat.udp.chkerr); + UIP_LOG("udp: bad checksum."); + goto drop; + } +#else /* UIP_UDP_CHECKSUMS */ + uip_len = uip_len - UIP_IPUDPH_LEN; +#endif /* UIP_UDP_CHECKSUMS */ + + /* Demultiplex this UDP packet between the UDP "connections". */ + for(uip_udp_conn = &uip_udp_conns[0]; + uip_udp_conn < &uip_udp_conns[UIP_UDP_CONNS]; + ++uip_udp_conn) { + /* If the local UDP port is non-zero, the connection is considered + to be used. If so, the local port number is checked against the + destination port number in the received packet. If the two port + numbers match, the remote port number is checked if the + connection is bound to a remote port. Finally, if the + connection is bound to a remote IP address, the source IP + address of the packet is checked. */ + if(uip_udp_conn->lport != 0 && + UDPBUF->destport == uip_udp_conn->lport && + (uip_udp_conn->rport == 0 || + UDPBUF->srcport == uip_udp_conn->rport) && + (uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_all_zeroes_addr) || + uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_broadcast_addr) || + uip_ipaddr_cmp(&BUF->srcipaddr, &uip_udp_conn->ripaddr))) { + goto udp_found; + } + } + UIP_LOG("udp: no matching connection found"); +#if UIP_CONF_ICMP_DEST_UNREACH && !UIP_CONF_IPV6 + /* Copy fields from packet header into payload of this ICMP packet. */ + memcpy(&(ICMPBUF->payload[0]), ICMPBUF, UIP_IPH_LEN + 8); + + /* Set the ICMP type and code. */ + ICMPBUF->type = ICMP_DEST_UNREACHABLE; + ICMPBUF->icode = ICMP_PORT_UNREACHABLE; + + /* Calculate the ICMP checksum. */ + ICMPBUF->icmpchksum = 0; + ICMPBUF->icmpchksum = ~uip_chksum((u16_t *)&(ICMPBUF->type), 36); + + /* Set the IP destination address to be the source address of the + original packet. */ + uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr); + + /* Set our IP address as the source address. */ + uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr); + + /* The size of the ICMP destination unreachable packet is 36 + the + size of the IP header (20) = 56. */ + uip_len = 36 + UIP_IPH_LEN; + ICMPBUF->len[0] = 0; + ICMPBUF->len[1] = (u8_t)uip_len; + ICMPBUF->ttl = UIP_TTL; + ICMPBUF->proto = UIP_PROTO_ICMP; + + goto ip_send_nolen; +#else /* UIP_CONF_ICMP_DEST_UNREACH */ + goto drop; +#endif /* UIP_CONF_ICMP_DEST_UNREACH */ + + udp_found: + uip_conn = NULL; + uip_flags = UIP_NEWDATA; + uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN]; + uip_slen = 0; + UIP_UDP_APPCALL(); + + udp_send: + if(uip_slen == 0) { + goto drop; + } + uip_len = uip_slen + UIP_IPUDPH_LEN; + +#if UIP_CONF_IPV6 + /* For IPv6, the IP length field does not include the IPv6 IP header + length. */ + BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8); + BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff); +#else /* UIP_CONF_IPV6 */ + BUF->len[0] = (uip_len >> 8); + BUF->len[1] = (uip_len & 0xff); +#endif /* UIP_CONF_IPV6 */ + + BUF->ttl = uip_udp_conn->ttl; + BUF->proto = UIP_PROTO_UDP; + + UDPBUF->udplen = HTONS(uip_slen + UIP_UDPH_LEN); + UDPBUF->udpchksum = 0; + + BUF->srcport = uip_udp_conn->lport; + BUF->destport = uip_udp_conn->rport; + + uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr); + uip_ipaddr_copy(&BUF->destipaddr, &uip_udp_conn->ripaddr); + + uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPTCPH_LEN]; + +#if UIP_UDP_CHECKSUMS + /* Calculate UDP checksum. */ + UDPBUF->udpchksum = ~(uip_udpchksum()); + if(UDPBUF->udpchksum == 0) { + UDPBUF->udpchksum = 0xffff; + } +#endif /* UIP_UDP_CHECKSUMS */ + + goto ip_send_nolen; +#endif /* UIP_UDP */ + + /* TCP input processing. */ + tcp_input: + UIP_STAT(++uip_stat.tcp.recv); + + /* Start of TCP input header processing code. */ + + if(uip_tcpchksum() != 0xffff) { /* Compute and check the TCP + checksum. */ + UIP_STAT(++uip_stat.tcp.drop); + UIP_STAT(++uip_stat.tcp.chkerr); + UIP_LOG("tcp: bad checksum."); + goto drop; + } + + /* Demultiplex this segment. */ + /* First check any active connections. */ + for(uip_connr = &uip_conns[0]; uip_connr <= &uip_conns[UIP_CONNS - 1]; + ++uip_connr) { + if(uip_connr->tcpstateflags != UIP_CLOSED && + BUF->destport == uip_connr->lport && + BUF->srcport == uip_connr->rport && + uip_ipaddr_cmp(&BUF->srcipaddr, &uip_connr->ripaddr)) { + goto found; + } + } + + /* If we didn't find and active connection that expected the packet, + either this packet is an old duplicate, or this is a SYN packet + destined for a connection in LISTEN. If the SYN flag isn't set, + it is an old packet and we send a RST. */ + if((BUF->flags & TCP_CTL) != TCP_SYN) { + goto reset; + } + + tmp16 = BUF->destport; + /* Next, check listening connections. */ + for(c = 0; c < UIP_LISTENPORTS; ++c) { + if(tmp16 == uip_listenports[c]) { + goto found_listen; + } + } + + /* No matching connection found, so we send a RST packet. */ + UIP_STAT(++uip_stat.tcp.synrst); + + reset: + /* We do not send resets in response to resets. */ + if(BUF->flags & TCP_RST) { + goto drop; + } + + UIP_STAT(++uip_stat.tcp.rst); + + BUF->flags = TCP_RST | TCP_ACK; + uip_len = UIP_IPTCPH_LEN; + BUF->tcpoffset = 5 << 4; + + /* Flip the seqno and ackno fields in the TCP header. */ + c = BUF->seqno[3]; + BUF->seqno[3] = BUF->ackno[3]; + BUF->ackno[3] = c; + + c = BUF->seqno[2]; + BUF->seqno[2] = BUF->ackno[2]; + BUF->ackno[2] = c; + + c = BUF->seqno[1]; + BUF->seqno[1] = BUF->ackno[1]; + BUF->ackno[1] = c; + + c = BUF->seqno[0]; + BUF->seqno[0] = BUF->ackno[0]; + BUF->ackno[0] = c; + + /* We also have to increase the sequence number we are + acknowledging. If the least significant byte overflowed, we need + to propagate the carry to the other bytes as well. */ + if(++BUF->ackno[3] == 0) { + if(++BUF->ackno[2] == 0) { + if(++BUF->ackno[1] == 0) { + ++BUF->ackno[0]; + } + } + } + + /* Swap port numbers. */ + tmp16 = BUF->srcport; + BUF->srcport = BUF->destport; + BUF->destport = tmp16; + + /* Swap IP addresses. */ + uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr); + uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr); + + /* And send out the RST packet! */ + goto tcp_send_noconn; + + /* This label will be jumped to if we matched the incoming packet + with a connection in LISTEN. In that case, we should create a new + connection and send a SYNACK in return. */ + found_listen: + /* First we check if there are any connections available. Unused + connections are kept in the same table as used connections, but + unused ones have the tcpstate set to CLOSED. Also, connections in + TIME_WAIT are kept track of and we'll use the oldest one if no + CLOSED connections are found. Thanks to Eddie C. Dost for a very + nice algorithm for the TIME_WAIT search. */ + uip_connr = 0; + for(c = 0; c < UIP_CONNS; ++c) { + if(uip_conns[c].tcpstateflags == UIP_CLOSED) { + uip_connr = &uip_conns[c]; + break; + } + if(uip_conns[c].tcpstateflags == UIP_TIME_WAIT) { + if(uip_connr == 0 || + uip_conns[c].timer > uip_connr->timer) { + uip_connr = &uip_conns[c]; + } + } + } + + if(uip_connr == 0) { + /* All connections are used already, we drop packet and hope that + the remote end will retransmit the packet at a time when we + have more spare connections. */ + UIP_STAT(++uip_stat.tcp.syndrop); + UIP_LOG("tcp: found no unused connections."); + goto drop; + } + uip_conn = uip_connr; + + /* Fill in the necessary fields for the new connection. */ + uip_connr->rto = uip_connr->timer = UIP_RTO; + uip_connr->sa = 0; + uip_connr->sv = 4; + uip_connr->nrtx = 0; + uip_connr->lport = BUF->destport; + uip_connr->rport = BUF->srcport; + uip_ipaddr_copy(&uip_connr->ripaddr, &BUF->srcipaddr); + uip_connr->tcpstateflags = UIP_SYN_RCVD; + + uip_connr->snd_nxt[0] = iss[0]; + uip_connr->snd_nxt[1] = iss[1]; + uip_connr->snd_nxt[2] = iss[2]; + uip_connr->snd_nxt[3] = iss[3]; + uip_connr->len = 1; + + /* rcv_nxt should be the seqno from the incoming packet + 1. */ + uip_connr->rcv_nxt[3] = BUF->seqno[3]; + uip_connr->rcv_nxt[2] = BUF->seqno[2]; + uip_connr->rcv_nxt[1] = BUF->seqno[1]; + uip_connr->rcv_nxt[0] = BUF->seqno[0]; + uip_add_rcv_nxt(1); + + /* Parse the TCP MSS option, if present. */ + if((BUF->tcpoffset & 0xf0) > 0x50) { + for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) { + opt = uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + c]; + if(opt == TCP_OPT_END) { + /* End of options. */ + break; + } else if(opt == TCP_OPT_NOOP) { + ++c; + /* NOP option. */ + } else if(opt == TCP_OPT_MSS && + uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) { + /* An MSS option with the right option length. */ + tmp16 = ((u16_t)uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) | + (u16_t)uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + 3 + c]; + uip_connr->initialmss = uip_connr->mss = + tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16; + + /* And we are done processing options. */ + break; + } else { + /* All other options have a length field, so that we easily + can skip past them. */ + if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) { + /* If the length field is zero, the options are malformed + and we don't process them further. */ + break; + } + c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c]; + } + } + } + + /* Our response will be a SYNACK. */ +#if UIP_ACTIVE_OPEN + tcp_send_synack: + BUF->flags = TCP_ACK; + + tcp_send_syn: + BUF->flags |= TCP_SYN; +#else /* UIP_ACTIVE_OPEN */ + tcp_send_synack: + BUF->flags = TCP_SYN | TCP_ACK; +#endif /* UIP_ACTIVE_OPEN */ + + /* We send out the TCP Maximum Segment Size option with our + SYNACK. */ + BUF->optdata[0] = TCP_OPT_MSS; + BUF->optdata[1] = TCP_OPT_MSS_LEN; + BUF->optdata[2] = (UIP_TCP_MSS) / 256; + BUF->optdata[3] = (UIP_TCP_MSS) & 255; + uip_len = UIP_IPTCPH_LEN + TCP_OPT_MSS_LEN; + BUF->tcpoffset = ((UIP_TCPH_LEN + TCP_OPT_MSS_LEN) / 4) << 4; + goto tcp_send; + + /* This label will be jumped to if we found an active connection. */ + found: + uip_conn = uip_connr; + uip_flags = 0; + /* We do a very naive form of TCP reset processing; we just accept + any RST and kill our connection. We should in fact check if the + sequence number of this reset is within our advertised window + before we accept the reset. */ + if(BUF->flags & TCP_RST) { + uip_connr->tcpstateflags = UIP_CLOSED; + UIP_LOG("tcp: got reset, aborting connection."); + uip_flags = UIP_ABORT; + UIP_APPCALL(); + goto drop; + } + /* Calculate the length of the data, if the application has sent + any data to us. */ + c = (BUF->tcpoffset >> 4) << 2; + /* uip_len will contain the length of the actual TCP data. This is + calculated by subtracing the length of the TCP header (in + c) and the length of the IP header (20 bytes). */ + uip_len = uip_len - c - UIP_IPH_LEN; + + /* First, check if the sequence number of the incoming packet is + what we're expecting next. If not, we send out an ACK with the + correct numbers in. */ + if(!(((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_SYN_SENT) && + ((BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)))) { + if((uip_len > 0 || ((BUF->flags & (TCP_SYN | TCP_FIN)) != 0)) && + (BUF->seqno[0] != uip_connr->rcv_nxt[0] || + BUF->seqno[1] != uip_connr->rcv_nxt[1] || + BUF->seqno[2] != uip_connr->rcv_nxt[2] || + BUF->seqno[3] != uip_connr->rcv_nxt[3])) { + goto tcp_send_ack; + } + } + + /* Next, check if the incoming segment acknowledges any outstanding + data. If so, we update the sequence number, reset the length of + the outstanding data, calculate RTT estimations, and reset the + retransmission timer. */ + if((BUF->flags & TCP_ACK) && uip_outstanding(uip_connr)) { + uip_add32(uip_connr->snd_nxt, uip_connr->len); + + if(BUF->ackno[0] == uip_acc32[0] && + BUF->ackno[1] == uip_acc32[1] && + BUF->ackno[2] == uip_acc32[2] && + BUF->ackno[3] == uip_acc32[3]) { + /* Update sequence number. */ + uip_connr->snd_nxt[0] = uip_acc32[0]; + uip_connr->snd_nxt[1] = uip_acc32[1]; + uip_connr->snd_nxt[2] = uip_acc32[2]; + uip_connr->snd_nxt[3] = uip_acc32[3]; + + /* Do RTT estimation, unless we have done retransmissions. */ + if(uip_connr->nrtx == 0) { + signed char m; + m = uip_connr->rto - uip_connr->timer; + /* This is taken directly from VJs original code in his paper */ + m = m - (uip_connr->sa >> 3); + uip_connr->sa += m; + if(m < 0) { + m = -m; + } + m = m - (uip_connr->sv >> 2); + uip_connr->sv += m; + uip_connr->rto = (uip_connr->sa >> 3) + uip_connr->sv; + + } + /* Set the acknowledged flag. */ + uip_flags = UIP_ACKDATA; + /* Reset the retransmission timer. */ + uip_connr->timer = uip_connr->rto; + + /* Reset length of outstanding data. */ + uip_connr->len = 0; + } + + } + + /* Do different things depending on in what state the connection is. */ + switch(uip_connr->tcpstateflags & UIP_TS_MASK) { + /* CLOSED and LISTEN are not handled here. CLOSE_WAIT is not + implemented, since we force the application to close when the + peer sends a FIN (hence the application goes directly from + ESTABLISHED to LAST_ACK). */ + case UIP_SYN_RCVD: + /* In SYN_RCVD we have sent out a SYNACK in response to a SYN, and + we are waiting for an ACK that acknowledges the data we sent + out the last time. Therefore, we want to have the UIP_ACKDATA + flag set. If so, we enter the ESTABLISHED state. */ + if(uip_flags & UIP_ACKDATA) { + uip_connr->tcpstateflags = UIP_ESTABLISHED; + uip_flags = UIP_CONNECTED; + uip_connr->len = 0; + if(uip_len > 0) { + uip_flags |= UIP_NEWDATA; + uip_add_rcv_nxt(uip_len); + } + uip_slen = 0; + UIP_APPCALL(); + goto appsend; + } + goto drop; +#if UIP_ACTIVE_OPEN + case UIP_SYN_SENT: + /* In SYN_SENT, we wait for a SYNACK that is sent in response to + our SYN. The rcv_nxt is set to sequence number in the SYNACK + plus one, and we send an ACK. We move into the ESTABLISHED + state. */ + if((uip_flags & UIP_ACKDATA) && + (BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)) { + + /* Parse the TCP MSS option, if present. */ + if((BUF->tcpoffset & 0xf0) > 0x50) { + for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) { + opt = uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + c]; + if(opt == TCP_OPT_END) { + /* End of options. */ + break; + } else if(opt == TCP_OPT_NOOP) { + ++c; + /* NOP option. */ + } else if(opt == TCP_OPT_MSS && + uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) { + /* An MSS option with the right option length. */ + tmp16 = (uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) | + uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 3 + c]; + uip_connr->initialmss = + uip_connr->mss = tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16; + + /* And we are done processing options. */ + break; + } else { + /* All other options have a length field, so that we easily + can skip past them. */ + if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) { + /* If the length field is zero, the options are malformed + and we don't process them further. */ + break; + } + c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c]; + } + } + } + uip_connr->tcpstateflags = UIP_ESTABLISHED; + uip_connr->rcv_nxt[0] = BUF->seqno[0]; + uip_connr->rcv_nxt[1] = BUF->seqno[1]; + uip_connr->rcv_nxt[2] = BUF->seqno[2]; + uip_connr->rcv_nxt[3] = BUF->seqno[3]; + uip_add_rcv_nxt(1); + uip_flags = UIP_CONNECTED | UIP_NEWDATA; + uip_connr->len = 0; + uip_len = 0; + uip_slen = 0; + UIP_APPCALL(); + goto appsend; + } + /* Inform the application that the connection failed */ + uip_flags = UIP_ABORT; + UIP_APPCALL(); + /* The connection is closed after we send the RST */ + uip_conn->tcpstateflags = UIP_CLOSED; + goto reset; +#endif /* UIP_ACTIVE_OPEN */ + + case UIP_ESTABLISHED: + /* In the ESTABLISHED state, we call upon the application to feed + data into the uip_buf. If the UIP_ACKDATA flag is set, the + application should put new data into the buffer, otherwise we are + retransmitting an old segment, and the application should put that + data into the buffer. + + If the incoming packet is a FIN, we should close the connection on + this side as well, and we send out a FIN and enter the LAST_ACK + state. We require that there is no outstanding data; otherwise the + sequence numbers will be screwed up. */ + + if(BUF->flags & TCP_FIN && !(uip_connr->tcpstateflags & UIP_STOPPED)) { + if(uip_outstanding(uip_connr)) { + goto drop; + } + uip_add_rcv_nxt(1 + uip_len); + uip_flags |= UIP_CLOSE; + if(uip_len > 0) { + uip_flags |= UIP_NEWDATA; + } + UIP_APPCALL(); + uip_connr->len = 1; + uip_connr->tcpstateflags = UIP_LAST_ACK; + uip_connr->nrtx = 0; + tcp_send_finack: + BUF->flags = TCP_FIN | TCP_ACK; + goto tcp_send_nodata; + } + + /* Check the URG flag. If this is set, the segment carries urgent + data that we must pass to the application. */ + if((BUF->flags & TCP_URG) != 0) { +#if UIP_URGDATA > 0 + uip_urglen = (BUF->urgp[0] << 8) | BUF->urgp[1]; + if(uip_urglen > uip_len) { + /* There is more urgent data in the next segment to come. */ + uip_urglen = uip_len; + } + uip_add_rcv_nxt(uip_urglen); + uip_len -= uip_urglen; + uip_urgdata = uip_appdata; + uip_appdata += uip_urglen; + } else { + uip_urglen = 0; +#else /* UIP_URGDATA > 0 */ + uip_appdata = ((char *)uip_appdata) + ((BUF->urgp[0] << 8) | BUF->urgp[1]); + uip_len -= (BUF->urgp[0] << 8) | BUF->urgp[1]; +#endif /* UIP_URGDATA > 0 */ + } + + /* If uip_len > 0 we have TCP data in the packet, and we flag this + by setting the UIP_NEWDATA flag and update the sequence number + we acknowledge. If the application has stopped the dataflow + using uip_stop(), we must not accept any data packets from the + remote host. */ + if(uip_len > 0 && !(uip_connr->tcpstateflags & UIP_STOPPED)) { + uip_flags |= UIP_NEWDATA; + uip_add_rcv_nxt(uip_len); + } + + /* Check if the available buffer space advertised by the other end + is smaller than the initial MSS for this connection. If so, we + set the current MSS to the window size to ensure that the + application does not send more data than the other end can + handle. + + If the remote host advertises a zero window, we set the MSS to + the initial MSS so that the application will send an entire MSS + of data. This data will not be acknowledged by the receiver, + and the application will retransmit it. This is called the + "persistent timer" and uses the retransmission mechanism. + */ + tmp16 = ((u16_t)BUF->wnd[0] << 8) + (u16_t)BUF->wnd[1]; + if(tmp16 > uip_connr->initialmss || + tmp16 == 0) { + tmp16 = uip_connr->initialmss; + } + uip_connr->mss = tmp16; + + /* If this packet constitutes an ACK for outstanding data (flagged + by the UIP_ACKDATA flag, we should call the application since it + might want to send more data. If the incoming packet had data + from the peer (as flagged by the UIP_NEWDATA flag), the + application must also be notified. + + When the application is called, the global variable uip_len + contains the length of the incoming data. The application can + access the incoming data through the global pointer + uip_appdata, which usually points UIP_IPTCPH_LEN + UIP_LLH_LEN + bytes into the uip_buf array. + + If the application wishes to send any data, this data should be + put into the uip_appdata and the length of the data should be + put into uip_len. If the application don't have any data to + send, uip_len must be set to 0. */ + if(uip_flags & (UIP_NEWDATA | UIP_ACKDATA)) { + uip_slen = 0; + UIP_APPCALL(); + + appsend: + + if(uip_flags & UIP_ABORT) { + uip_slen = 0; + uip_connr->tcpstateflags = UIP_CLOSED; + BUF->flags = TCP_RST | TCP_ACK; + goto tcp_send_nodata; + } + + if(uip_flags & UIP_CLOSE) { + uip_slen = 0; + uip_connr->len = 1; + uip_connr->tcpstateflags = UIP_FIN_WAIT_1; + uip_connr->nrtx = 0; + BUF->flags = TCP_FIN | TCP_ACK; + goto tcp_send_nodata; + } + + /* If uip_slen > 0, the application has data to be sent. */ + if(uip_slen > 0) { + + /* If the connection has acknowledged data, the contents of + the ->len variable should be discarded. */ + if((uip_flags & UIP_ACKDATA) != 0) { + uip_connr->len = 0; + } + + /* If the ->len variable is non-zero the connection has + already data in transit and cannot send anymore right + now. */ + if(uip_connr->len == 0) { + + /* The application cannot send more than what is allowed by + the mss (the minumum of the MSS and the available + window). */ + if(uip_slen > uip_connr->mss) { + uip_slen = uip_connr->mss; + } + + /* Remember how much data we send out now so that we know + when everything has been acknowledged. */ + uip_connr->len = uip_slen; + } else { + + /* If the application already had unacknowledged data, we + make sure that the application does not send (i.e., + retransmit) out more than it previously sent out. */ + uip_slen = uip_connr->len; + } + } + uip_connr->nrtx = 0; + apprexmit: + uip_appdata = uip_sappdata; + + /* If the application has data to be sent, or if the incoming + packet had new data in it, we must send out a packet. */ + if(uip_slen > 0 && uip_connr->len > 0) { + /* Add the length of the IP and TCP headers. */ + uip_len = uip_connr->len + UIP_TCPIP_HLEN; + /* We always set the ACK flag in response packets. */ + BUF->flags = TCP_ACK | TCP_PSH; + /* Send the packet. */ + goto tcp_send_noopts; + } + /* If there is no data to send, just send out a pure ACK if + there is newdata. */ + if(uip_flags & UIP_NEWDATA) { + uip_len = UIP_TCPIP_HLEN; + BUF->flags = TCP_ACK; + goto tcp_send_noopts; + } + } + goto drop; + case UIP_LAST_ACK: + /* We can close this connection if the peer has acknowledged our + FIN. This is indicated by the UIP_ACKDATA flag. */ + if(uip_flags & UIP_ACKDATA) { + uip_connr->tcpstateflags = UIP_CLOSED; + uip_flags = UIP_CLOSE; + UIP_APPCALL(); + } + break; + + case UIP_FIN_WAIT_1: + /* The application has closed the connection, but the remote host + hasn't closed its end yet. Thus we do nothing but wait for a + FIN from the other side. */ + if(uip_len > 0) { + uip_add_rcv_nxt(uip_len); + } + if(BUF->flags & TCP_FIN) { + if(uip_flags & UIP_ACKDATA) { + uip_connr->tcpstateflags = UIP_TIME_WAIT; + uip_connr->timer = 0; + uip_connr->len = 0; + } else { + uip_connr->tcpstateflags = UIP_CLOSING; + } + uip_add_rcv_nxt(1); + uip_flags = UIP_CLOSE; + UIP_APPCALL(); + goto tcp_send_ack; + } else if(uip_flags & UIP_ACKDATA) { + uip_connr->tcpstateflags = UIP_FIN_WAIT_2; + uip_connr->len = 0; + goto drop; + } + if(uip_len > 0) { + goto tcp_send_ack; + } + goto drop; + + case UIP_FIN_WAIT_2: + if(uip_len > 0) { + uip_add_rcv_nxt(uip_len); + } + if(BUF->flags & TCP_FIN) { + uip_connr->tcpstateflags = UIP_TIME_WAIT; + uip_connr->timer = 0; + uip_add_rcv_nxt(1); + uip_flags = UIP_CLOSE; + UIP_APPCALL(); + goto tcp_send_ack; + } + if(uip_len > 0) { + goto tcp_send_ack; + } + goto drop; + + case UIP_TIME_WAIT: + goto tcp_send_ack; + + case UIP_CLOSING: + if(uip_flags & UIP_ACKDATA) { + uip_connr->tcpstateflags = UIP_TIME_WAIT; + uip_connr->timer = 0; + } + } + goto drop; + + /* We jump here when we are ready to send the packet, and just want + to set the appropriate TCP sequence numbers in the TCP header. */ + tcp_send_ack: + BUF->flags = TCP_ACK; + + tcp_send_nodata: + uip_len = UIP_IPTCPH_LEN; + + tcp_send_noopts: + BUF->tcpoffset = (UIP_TCPH_LEN / 4) << 4; + + /* We're done with the input processing. We are now ready to send a + reply. Our job is to fill in all the fields of the TCP and IP + headers before calculating the checksum and finally send the + packet. */ + tcp_send: + BUF->ackno[0] = uip_connr->rcv_nxt[0]; + BUF->ackno[1] = uip_connr->rcv_nxt[1]; + BUF->ackno[2] = uip_connr->rcv_nxt[2]; + BUF->ackno[3] = uip_connr->rcv_nxt[3]; + + BUF->seqno[0] = uip_connr->snd_nxt[0]; + BUF->seqno[1] = uip_connr->snd_nxt[1]; + BUF->seqno[2] = uip_connr->snd_nxt[2]; + BUF->seqno[3] = uip_connr->snd_nxt[3]; + + BUF->proto = UIP_PROTO_TCP; + + BUF->srcport = uip_connr->lport; + BUF->destport = uip_connr->rport; + + uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr); + uip_ipaddr_copy(&BUF->destipaddr, &uip_connr->ripaddr); + + if(uip_connr->tcpstateflags & UIP_STOPPED) { + /* If the connection has issued uip_stop(), we advertise a zero + window so that the remote host will stop sending data. */ + BUF->wnd[0] = BUF->wnd[1] = 0; + } else { + BUF->wnd[0] = ((UIP_RECEIVE_WINDOW) >> 8); + BUF->wnd[1] = ((UIP_RECEIVE_WINDOW) & 0xff); + } + + tcp_send_noconn: + BUF->ttl = UIP_TTL; +#if UIP_CONF_IPV6 + /* For IPv6, the IP length field does not include the IPv6 IP header + length. */ + BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8); + BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff); +#else /* UIP_CONF_IPV6 */ + BUF->len[0] = (uip_len >> 8); + BUF->len[1] = (uip_len & 0xff); +#endif /* UIP_CONF_IPV6 */ + + BUF->urgp[0] = BUF->urgp[1] = 0; + + /* Calculate TCP checksum. */ + BUF->tcpchksum = 0; + BUF->tcpchksum = ~(uip_tcpchksum()); + + ip_send_nolen: +#if UIP_CONF_IPV6 + BUF->vtc = 0x60; + BUF->tcflow = 0x00; + BUF->flow = 0x00; +#else /* UIP_CONF_IPV6 */ + BUF->vhl = 0x45; + BUF->tos = 0; + BUF->ipoffset[0] = BUF->ipoffset[1] = 0; + ++ipid; + BUF->ipid[0] = ipid >> 8; + BUF->ipid[1] = ipid & 0xff; + /* Calculate IP checksum. */ + BUF->ipchksum = 0; + BUF->ipchksum = ~(uip_ipchksum()); + DEBUG_PRINTF("uip ip_send_nolen: checksum 0x%04x\n", uip_ipchksum()); +#endif /* UIP_CONF_IPV6 */ + UIP_STAT(++uip_stat.tcp.sent); +#if UIP_CONF_IPV6 + send: +#endif /* UIP_CONF_IPV6 */ + DEBUG_PRINTF("Sending packet with length %d (%d)\n", uip_len, + (BUF->len[0] << 8) | BUF->len[1]); + + UIP_STAT(++uip_stat.ip.sent); + /* Return and let the caller do the actual transmission. */ + uip_flags = 0; + return; + + drop: + uip_len = 0; + uip_flags = 0; + return; +} +/*---------------------------------------------------------------------------*/ +u16_t +htons(u16_t val) +{ + return HTONS(val); +} + +u32_t +htonl(u32_t val) +{ + return HTONL(val); +} +/*---------------------------------------------------------------------------*/ +void +uip_send(const void *data, int len) +{ + int copylen; +#define MIN(a,b) ((a) < (b)? (a): (b)) + copylen = MIN(len, UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN - + (int)((char *)uip_sappdata - (char *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN])); + if(copylen > 0) { + uip_slen = copylen; + if(data != uip_sappdata) { + memcpy(uip_sappdata, (data), uip_slen); + } + } +} +/*---------------------------------------------------------------------------*/ +/** @} */ +#endif /* UIP_CONF_IPV6 */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uip.h b/lib/lufa/Projects/Webserver/Lib/uip/uip.h new file mode 100644 index 000000000..7b87a2c77 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/uip.h @@ -0,0 +1,2130 @@ + +/** + * \addtogroup uip + * @{ + */ + +/** + * \file + * Header file for the uIP TCP/IP stack. + * \author Adam Dunkels <adam@dunkels.com> + * \author Julien Abeille <jabeille@cisco.com> (IPv6 related code) + * \author Mathilde Durvy <mdurvy@cisco.com> (IPv6 related code) + * + * The uIP TCP/IP stack header file contains definitions for a number + * of C macros that are used by uIP programs as well as internal uIP + * structures, TCP/IP header structures and function declarations. + * + */ + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uip.h,v 1.24 2009/04/06 13:18:50 nvt-se Exp $ + * + */ + +#ifndef __UIP_H__ +#define __UIP_H__ + +#include "uipopt.h" + +/** + * Representation of an IP address. + * + */ +#if UIP_CONF_IPV6 +typedef union uip_ip6addr_t { + u8_t u8[16]; /* Initialiser, must come first!!! */ + u16_t u16[8]; +} uip_ip6addr_t; + +typedef uip_ip6addr_t uip_ipaddr_t; +#else /* UIP_CONF_IPV6 */ +typedef union uip_ip4addr_t { + u8_t u8[4]; /* Initialiser, must come first!!! */ + u16_t u16[2]; +#if 0 + u32_t u32; +#endif +} uip_ip4addr_t; +typedef uip_ip4addr_t uip_ipaddr_t; +#endif /* UIP_CONF_IPV6 */ + + +/*---------------------------------------------------------------------------*/ + +/** \brief 16 bit 802.15.4 address */ +struct uip_802154_shortaddr { + u8_t addr[2]; +}; +/** \brief 64 bit 802.15.4 address */ +struct uip_802154_longaddr { + u8_t addr[8]; +}; + +/** \brief 802.11 address */ +struct uip_80211_addr { + u8_t addr[6]; +}; + +/** \brief 802.3 address */ +struct uip_eth_addr { + u8_t addr[6]; +}; + +#if UIP_CONF_LL_802154 +/** \brief 802.15.4 address */ +typedef struct uip_802154_longaddr uip_lladdr_t; +#define UIP_802154_SHORTADDR_LEN 2 +#define UIP_802154_LONGADDR_LEN 8 +#define UIP_LLADDR_LEN UIP_802154_LONGADDR_LEN +#else /*UIP_CONF_LL_802154*/ +#if UIP_CONF_LL_80211 +/** \brief 802.11 address */ +typedef struct uip_80211_addr uip_lladdr_t; +#define UIP_LLADDR_LEN 6 +#else /*UIP_CONF_LL_80211*/ +/** \brief Ethernet address */ +typedef struct uip_eth_addr uip_lladdr_t; +#define UIP_LLADDR_LEN 6 +#endif /*UIP_CONF_LL_80211*/ +#endif /*UIP_CONF_LL_802154*/ + +/*---------------------------------------------------------------------------*/ +/* First, the functions that should be called from the + * system. Initialization, the periodic timer, and incoming packets are + * handled by the following three functions. + */ +/** + * \defgroup uipconffunc uIP configuration functions + * @{ + * + * The uIP configuration functions are used for setting run-time + * parameters in uIP such as IP addresses. + */ + +/** + * Set the IP address of this host. + * + * The IP address is represented as a 4-byte array where the first + * octet of the IP address is put in the first member of the 4-byte + * array. + * + * Example: + \code + + uip_ipaddr_t addr; + + uip_ipaddr(&addr, 192,168,1,2); + uip_sethostaddr(&addr); + + \endcode + * \param addr A pointer to an IP address of type uip_ipaddr_t; + * + * \sa uip_ipaddr() + * + * \hideinitializer + */ +#define uip_sethostaddr(addr) uip_ipaddr_copy(&uip_hostaddr, (addr)) + +/** + * Get the IP address of this host. + * + * The IP address is represented as a 4-byte array where the first + * octet of the IP address is put in the first member of the 4-byte + * array. + * + * Example: + \code + uip_ipaddr_t hostaddr; + + uip_gethostaddr(&hostaddr); + \endcode + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the currently configured IP address. + * + * \hideinitializer + */ +#define uip_gethostaddr(addr) uip_ipaddr_copy((addr), &uip_hostaddr) + +/** + * Set the default router's IP address. + * + * \param addr A pointer to a uip_ipaddr_t variable containing the IP + * address of the default router. + * + * \sa uip_ipaddr() + * + * \hideinitializer + */ +#define uip_setdraddr(addr) uip_ipaddr_copy(&uip_draddr, (addr)) + +/** + * Set the netmask. + * + * \param addr A pointer to a uip_ipaddr_t variable containing the IP + * address of the netmask. + * + * \sa uip_ipaddr() + * + * \hideinitializer + */ +#define uip_setnetmask(addr) uip_ipaddr_copy(&uip_netmask, (addr)) + + +/** + * Get the default router's IP address. + * + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the IP address of the default router. + * + * \hideinitializer + */ +#define uip_getdraddr(addr) uip_ipaddr_copy((addr), &uip_draddr) + +/** + * Get the netmask. + * + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the value of the netmask. + * + * \hideinitializer + */ +#define uip_getnetmask(addr) uip_ipaddr_copy((addr), &uip_netmask) + +/** @} */ + +/** + * \defgroup uipinit uIP initialization functions + * @{ + * + * The uIP initialization functions are used for booting uIP. + */ + +/** + * uIP initialization function. + * + * This function should be called at boot up to initialize the uIP + * TCP/IP stack. + */ +void uip_init(void); + +/** + * uIP initialization function. + * + * This function may be used at boot time to set the initial ip_id. + */ +void uip_setipid(u16_t id); + +/** @} */ + +/** + * \defgroup uipdevfunc uIP device driver functions + * @{ + * + * These functions are used by a network device driver for interacting + * with uIP. + */ + +/** + * Process an incoming packet. + * + * This function should be called when the device driver has received + * a packet from the network. The packet from the device driver must + * be present in the uip_buf buffer, and the length of the packet + * should be placed in the uip_len variable. + * + * When the function returns, there may be an outbound packet placed + * in the uip_buf packet buffer. If so, the uip_len variable is set to + * the length of the packet. If no packet is to be sent out, the + * uip_len variable is set to 0. + * + * The usual way of calling the function is presented by the source + * code below. + \code + uip_len = devicedriver_poll(); + if(uip_len > 0) { + uip_input(); + if(uip_len > 0) { + devicedriver_send(); + } + } + \endcode + * + * \note If you are writing a uIP device driver that needs ARP + * (Address Resolution Protocol), e.g., when running uIP over + * Ethernet, you will need to call the uIP ARP code before calling + * this function: + \code + #define BUF ((struct uip_eth_hdr *)&uip_buf[0]) + uip_len = ethernet_devicedrver_poll(); + if(uip_len > 0) { + if(BUF->type == HTONS(UIP_ETHTYPE_IP)) { + uip_arp_ipin(); + uip_input(); + if(uip_len > 0) { + uip_arp_out(); + ethernet_devicedriver_send(); + } + } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) { + uip_arp_arpin(); + if(uip_len > 0) { + ethernet_devicedriver_send(); + } + } + \endcode + * + * \hideinitializer + */ +#define uip_input() uip_process(UIP_DATA) + + +/** + * Periodic processing for a connection identified by its number. + * + * This function does the necessary periodic processing (timers, + * polling) for a uIP TCP connection, and should be called when the + * periodic uIP timer goes off. It should be called for every + * connection, regardless of whether they are open of closed. + * + * When the function returns, it may have an outbound packet waiting + * for service in the uIP packet buffer, and if so the uip_len + * variable is set to a value larger than zero. The device driver + * should be called to send out the packet. + * + * The usual way of calling the function is through a for() loop like + * this: + \code + for(i = 0; i < UIP_CONNS; ++i) { + uip_periodic(i); + if(uip_len > 0) { + devicedriver_send(); + } + } + \endcode + * + * \note If you are writing a uIP device driver that needs ARP + * (Address Resolution Protocol), e.g., when running uIP over + * Ethernet, you will need to call the uip_arp_out() function before + * calling the device driver: + \code + for(i = 0; i < UIP_CONNS; ++i) { + uip_periodic(i); + if(uip_len > 0) { + uip_arp_out(); + ethernet_devicedriver_send(); + } + } + \endcode + * + * \param conn The number of the connection which is to be periodically polled. + * + * \hideinitializer + */ +#if UIP_TCP +#define uip_periodic(conn) do { uip_conn = &uip_conns[conn]; \ + uip_process(UIP_TIMER); } while (0) + +/** + * + * + */ +#define uip_conn_active(conn) (uip_conns[conn].tcpstateflags != UIP_CLOSED) + +/** + * Perform periodic processing for a connection identified by a pointer + * to its structure. + * + * Same as uip_periodic() but takes a pointer to the actual uip_conn + * struct instead of an integer as its argument. This function can be + * used to force periodic processing of a specific connection. + * + * \param conn A pointer to the uip_conn struct for the connection to + * be processed. + * + * \hideinitializer + */ +#define uip_periodic_conn(conn) do { uip_conn = conn; \ + uip_process(UIP_TIMER); } while (0) + +/** + * Request that a particular connection should be polled. + * + * Similar to uip_periodic_conn() but does not perform any timer + * processing. The application is polled for new data. + * + * \param conn A pointer to the uip_conn struct for the connection to + * be processed. + * + * \hideinitializer + */ +#define uip_poll_conn(conn) do { uip_conn = conn; \ + uip_process(UIP_POLL_REQUEST); } while (0) + +#endif /* UIP_TCP */ + +#if UIP_UDP +/** + * Periodic processing for a UDP connection identified by its number. + * + * This function is essentially the same as uip_periodic(), but for + * UDP connections. It is called in a similar fashion as the + * uip_periodic() function: + \code + for(i = 0; i < UIP_UDP_CONNS; i++) { + uip_udp_periodic(i); + if(uip_len > 0) { + devicedriver_send(); + } + } + \endcode + * + * \note As for the uip_periodic() function, special care has to be + * taken when using uIP together with ARP and Ethernet: + \code + for(i = 0; i < UIP_UDP_CONNS; i++) { + uip_udp_periodic(i); + if(uip_len > 0) { + uip_arp_out(); + ethernet_devicedriver_send(); + } + } + \endcode + * + * \param conn The number of the UDP connection to be processed. + * + * \hideinitializer + */ +#define uip_udp_periodic(conn) do { uip_udp_conn = &uip_udp_conns[conn]; \ + uip_process(UIP_UDP_TIMER); } while(0) + +/** + * Periodic processing for a UDP connection identified by a pointer to + * its structure. + * + * Same as uip_udp_periodic() but takes a pointer to the actual + * uip_conn struct instead of an integer as its argument. This + * function can be used to force periodic processing of a specific + * connection. + * + * \param conn A pointer to the uip_udp_conn struct for the connection + * to be processed. + * + * \hideinitializer + */ +#define uip_udp_periodic_conn(conn) do { uip_udp_conn = conn; \ + uip_process(UIP_UDP_TIMER); } while(0) +#endif /* UIP_UDP */ + +/** \brief Abandon the reassembly of the current packet */ +void uip_reass_over(void); + +/** + * The uIP packet buffer. + * + * The uip_buf array is used to hold incoming and outgoing + * packets. The device driver should place incoming data into this + * buffer. When sending data, the device driver should read the link + * level headers and the TCP/IP headers from this buffer. The size of + * the link level headers is configured by the UIP_LLH_LEN define. + * + * \note The application data need not be placed in this buffer, so + * the device driver must read it from the place pointed to by the + * uip_appdata pointer as illustrated by the following example: + \code + void + devicedriver_send(void) + { + hwsend(&uip_buf[0], UIP_LLH_LEN); + if(uip_len <= UIP_LLH_LEN + UIP_TCPIP_HLEN) { + hwsend(&uip_buf[UIP_LLH_LEN], uip_len - UIP_LLH_LEN); + } else { + hwsend(&uip_buf[UIP_LLH_LEN], UIP_TCPIP_HLEN); + hwsend(uip_appdata, uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN); + } + } + \endcode +*/ +extern u8_t uip_buf[UIP_BUFSIZE+2]; + + + +/** @} */ + +/*---------------------------------------------------------------------------*/ +/* Functions that are used by the uIP application program. Opening and + * closing connections, sending and receiving data, etc. is all + * handled by the functions below. + */ +/** + * \defgroup uipappfunc uIP application functions + * @{ + * + * Functions used by an application running of top of uIP. + */ + +/** + * Start listening to the specified port. + * + * \note Since this function expects the port number in network byte + * order, a conversion using HTONS() or htons() is necessary. + * + \code + uip_listen(HTONS(80)); + \endcode + * + * \param port A 16-bit port number in network byte order. + */ +void uip_listen(u16_t port); + +/** + * Stop listening to the specified port. + * + * \note Since this function expects the port number in network byte + * order, a conversion using HTONS() or htons() is necessary. + * + \code + uip_unlisten(HTONS(80)); + \endcode + * + * \param port A 16-bit port number in network byte order. + */ +void uip_unlisten(u16_t port); + +/** + * Connect to a remote host using TCP. + * + * This function is used to start a new connection to the specified + * port on the specified host. It allocates a new connection identifier, + * sets the connection to the SYN_SENT state and sets the + * retransmission timer to 0. This will cause a TCP SYN segment to be + * sent out the next time this connection is periodically processed, + * which usually is done within 0.5 seconds after the call to + * uip_connect(). + * + * \note This function is available only if support for active open + * has been configured by defining UIP_ACTIVE_OPEN to 1 in uipopt.h. + * + * \note Since this function requires the port number to be in network + * byte order, a conversion using HTONS() or htons() is necessary. + * + \code + uip_ipaddr_t ipaddr; + + uip_ipaddr(&ipaddr, 192,168,1,2); + uip_connect(&ipaddr, HTONS(80)); + \endcode + * + * \param ripaddr The IP address of the remote host. + * + * \param port A 16-bit port number in network byte order. + * + * \return A pointer to the uIP connection identifier for the new connection, + * or NULL if no connection could be allocated. + * + */ +struct uip_conn *uip_connect(uip_ipaddr_t *ripaddr, u16_t port); + + + +/** + * \internal + * + * Check if a connection has outstanding (i.e., unacknowledged) data. + * + * \param conn A pointer to the uip_conn structure for the connection. + * + * \hideinitializer + */ +#define uip_outstanding(conn) ((conn)->len) + +/** + * Send data on the current connection. + * + * This function is used to send out a single segment of TCP + * data. Only applications that have been invoked by uIP for event + * processing can send data. + * + * The amount of data that actually is sent out after a call to this + * function is determined by the maximum amount of data TCP allows. uIP + * will automatically crop the data so that only the appropriate + * amount of data is sent. The function uip_mss() can be used to query + * uIP for the amount of data that actually will be sent. + * + * \note This function does not guarantee that the sent data will + * arrive at the destination. If the data is lost in the network, the + * application will be invoked with the uip_rexmit() event being + * set. The application will then have to resend the data using this + * function. + * + * \param data A pointer to the data which is to be sent. + * + * \param len The maximum amount of data bytes to be sent. + * + * \hideinitializer + */ +void uip_send(const void *data, int len); + +/** + * The length of any incoming data that is currently available (if available) + * in the uip_appdata buffer. + * + * The test function uip_data() must first be used to check if there + * is any data available at all. + * + * \hideinitializer + */ +/*void uip_datalen(void);*/ +#define uip_datalen() uip_len + +/** + * The length of any out-of-band data (urgent data) that has arrived + * on the connection. + * + * \note The configuration parameter UIP_URGDATA must be set for this + * function to be enabled. + * + * \hideinitializer + */ +#define uip_urgdatalen() uip_urglen + +/** + * Close the current connection. + * + * This function will close the current connection in a nice way. + * + * \hideinitializer + */ +#define uip_close() (uip_flags = UIP_CLOSE) + +/** + * Abort the current connection. + * + * This function will abort (reset) the current connection, and is + * usually used when an error has occurred that prevents using the + * uip_close() function. + * + * \hideinitializer + */ +#define uip_abort() (uip_flags = UIP_ABORT) + +/** + * Tell the sending host to stop sending data. + * + * This function will close our receiver's window so that we stop + * receiving data for the current connection. + * + * \hideinitializer + */ +#define uip_stop() (uip_conn->tcpstateflags |= UIP_STOPPED) + +/** + * Find out if the current connection has been previously stopped with + * uip_stop(). + * + * \hideinitializer + */ +#define uip_stopped(conn) ((conn)->tcpstateflags & UIP_STOPPED) + +/** + * Restart the current connection, if is has previously been stopped + * with uip_stop(). + * + * This function will open the receiver's window again so that we + * start receiving data for the current connection. + * + * \hideinitializer + */ +#define uip_restart() do { uip_flags |= UIP_NEWDATA; \ + uip_conn->tcpstateflags &= ~UIP_STOPPED; \ + } while(0) + + +/* uIP tests that can be made to determine in what state the current + connection is, and what the application function should do. */ + +/** + * Is the current connection a UDP connection? + * + * This function checks whether the current connection is a UDP connection. + * + * \hideinitializer + * + */ +#define uip_udpconnection() (uip_conn == NULL) + +/** + * Is new incoming data available? + * + * Will reduce to non-zero if there is new data for the application + * present at the uip_appdata pointer. The size of the data is + * available through the uip_len variable. + * + * \hideinitializer + */ +#define uip_newdata() (uip_flags & UIP_NEWDATA) + +/** + * Has previously sent data been acknowledged? + * + * Will reduce to non-zero if the previously sent data has been + * acknowledged by the remote host. This means that the application + * can send new data. + * + * \hideinitializer + */ +#define uip_acked() (uip_flags & UIP_ACKDATA) + +/** + * Has the connection just been connected? + * + * Reduces to non-zero if the current connection has been connected to + * a remote host. This will happen both if the connection has been + * actively opened (with uip_connect()) or passively opened (with + * uip_listen()). + * + * \hideinitializer + */ +#define uip_connected() (uip_flags & UIP_CONNECTED) + +/** + * Has the connection been closed by the other end? + * + * Is non-zero if the connection has been closed by the remote + * host. The application may then do the necessary clean-ups. + * + * \hideinitializer + */ +#define uip_closed() (uip_flags & UIP_CLOSE) + +/** + * Has the connection been aborted by the other end? + * + * Non-zero if the current connection has been aborted (reset) by the + * remote host. + * + * \hideinitializer + */ +#define uip_aborted() (uip_flags & UIP_ABORT) + +/** + * Has the connection timed out? + * + * Non-zero if the current connection has been aborted due to too many + * retransmissions. + * + * \hideinitializer + */ +#define uip_timedout() (uip_flags & UIP_TIMEDOUT) + +/** + * Do we need to retransmit previously data? + * + * Reduces to non-zero if the previously sent data has been lost in + * the network, and the application should retransmit it. The + * application should send the exact same data as it did the last + * time, using the uip_send() function. + * + * \hideinitializer + */ +#define uip_rexmit() (uip_flags & UIP_REXMIT) + +/** + * Is the connection being polled by uIP? + * + * Is non-zero if the reason the application is invoked is that the + * current connection has been idle for a while and should be + * polled. + * + * The polling event can be used for sending data without having to + * wait for the remote host to send data. + * + * \hideinitializer + */ +#define uip_poll() (uip_flags & UIP_POLL) + +/** + * Get the initial maximum segment size (MSS) of the current + * connection. + * + * \hideinitializer + */ +#define uip_initialmss() (uip_conn->initialmss) + +/** + * Get the current maximum segment size that can be sent on the current + * connection. + * + * The current maximum segment size that can be sent on the + * connection is computed from the receiver's window and the MSS of + * the connection (which also is available by calling + * uip_initialmss()). + * + * \hideinitializer + */ +#define uip_mss() (uip_conn->mss) + +/** + * Set up a new UDP connection. + * + * This function sets up a new UDP connection. The function will + * automatically allocate an unused local port for the new + * connection. However, another port can be chosen by using the + * uip_udp_bind() call, after the uip_udp_new() function has been + * called. + * + * Example: + \code + uip_ipaddr_t addr; + struct uip_udp_conn *c; + + uip_ipaddr(&addr, 192,168,2,1); + c = uip_udp_new(&addr, HTONS(12345)); + if(c != NULL) { + uip_udp_bind(c, HTONS(12344)); + } + \endcode + * \param ripaddr The IP address of the remote host. + * + * \param rport The remote port number in network byte order. + * + * \return The uip_udp_conn structure for the new connection or NULL + * if no connection could be allocated. + */ +struct uip_udp_conn *uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport); + +/** + * Removed a UDP connection. + * + * \param conn A pointer to the uip_udp_conn structure for the connection. + * + * \hideinitializer + */ +#define uip_udp_remove(conn) (conn)->lport = 0 + +/** + * Bind a UDP connection to a local port. + * + * \param conn A pointer to the uip_udp_conn structure for the + * connection. + * + * \param port The local port number, in network byte order. + * + * \hideinitializer + */ +#define uip_udp_bind(conn, port) (conn)->lport = port + +/** + * Send a UDP datagram of length len on the current connection. + * + * This function can only be called in response to a UDP event (poll + * or newdata). The data must be present in the uip_buf buffer, at the + * place pointed to by the uip_appdata pointer. + * + * \param len The length of the data in the uip_buf buffer. + * + * \hideinitializer + */ +#define uip_udp_send(len) uip_send((char *)uip_appdata, len) + +/** @} */ + +/* uIP convenience and converting functions. */ + +/** + * \defgroup uipconvfunc uIP conversion functions + * @{ + * + * These functions can be used for converting between different data + * formats used by uIP. + */ + +/** + * Convert an IP address to four bytes separated by commas. + * + * Example: + \code + uip_ipaddr_t ipaddr; + printf("ipaddr=%d.%d.%d.%d\n", uip_ipaddr_to_quad(&ipaddr)); + \endcode + * + * \param a A pointer to a uip_ipaddr_t. + * \hideinitializer + */ +#define uip_ipaddr_to_quad(a) (a)->u8[0],(a)->u8[1],(a)->u8[2],(a)->u8[3] + +/** + * Construct an IP address from four bytes. + * + * This function constructs an IP address of the type that uIP handles + * internally from four bytes. The function is handy for specifying IP + * addresses to use with e.g. the uip_connect() function. + * + * Example: + \code + uip_ipaddr_t ipaddr; + struct uip_conn *c; + + uip_ipaddr(&ipaddr, 192,168,1,2); + c = uip_connect(&ipaddr, HTONS(80)); + \endcode + * + * \param addr A pointer to a uip_ipaddr_t variable that will be + * filled in with the IP address. + * + * \param addr0 The first octet of the IP address. + * \param addr1 The second octet of the IP address. + * \param addr2 The third octet of the IP address. + * \param addr3 The forth octet of the IP address. + * + * \hideinitializer + */ +#define uip_ipaddr(addr, addr0,addr1,addr2,addr3) do { \ + (addr)->u8[0] = addr0; \ + (addr)->u8[1] = addr1; \ + (addr)->u8[2] = addr2; \ + (addr)->u8[3] = addr3; \ + } while(0) + +/** + * Construct an IPv6 address from eight 16-bit words. + * + * This function constructs an IPv6 address. + * + * \hideinitializer + */ +#define uip_ip6addr(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7) do { \ + (addr)->u16[0] = HTONS(addr0); \ + (addr)->u16[1] = HTONS(addr1); \ + (addr)->u16[2] = HTONS(addr2); \ + (addr)->u16[3] = HTONS(addr3); \ + (addr)->u16[4] = HTONS(addr4); \ + (addr)->u16[5] = HTONS(addr5); \ + (addr)->u16[6] = HTONS(addr6); \ + (addr)->u16[7] = HTONS(addr7); \ + } while(0) + +/** + * Construct an IPv6 address from sixteen 8-bit words. + * + * This function constructs an IPv6 address. + * + * \hideinitializer + */ +#define uip_ip6addr_u8(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7,addr8,addr9,addr10,addr11,addr12,addr13,addr14,addr15) do { \ + (addr)->u8[0] = addr0; \ + (addr)->u8[1] = addr1; \ + (addr)->u8[2] = addr2; \ + (addr)->u8[3] = addr3; \ + (addr)->u8[4] = addr4; \ + (addr)->u8[5] = addr5; \ + (addr)->u8[6] = addr6; \ + (addr)->u8[7] = addr7; \ + (addr)->u8[8] = addr8; \ + (addr)->u8[9] = addr9; \ + (addr)->u8[10] = addr10; \ + (addr)->u8[11] = addr11; \ + (addr)->u8[12] = addr12; \ + (addr)->u8[13] = addr13; \ + (addr)->u8[14] = addr14; \ + (addr)->u8[15] = addr15; \ + } while(0) + + +/** + * Copy an IP address to another IP address. + * + * Copies an IP address from one place to another. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2; + + uip_ipaddr(&ipaddr1, 192,16,1,2); + uip_ipaddr_copy(&ipaddr2, &ipaddr1); + \endcode + * + * \param dest The destination for the copy. + * \param src The source from where to copy. + * + * \hideinitializer + */ +#ifndef uip_ipaddr_copy +#define uip_ipaddr_copy(dest, src) (*(dest) = *(src)) +#endif + +/** + * Compare two IP addresses + * + * Compares two IP addresses. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2; + + uip_ipaddr(&ipaddr1, 192,16,1,2); + if(uip_ipaddr_cmp(&ipaddr2, &ipaddr1)) { + printf("They are the same"); + } + \endcode + * + * \param addr1 The first IP address. + * \param addr2 The second IP address. + * + * \hideinitializer + */ +#if !UIP_CONF_IPV6 +#define uip_ipaddr_cmp(addr1, addr2) ((addr1)->u16[0] == (addr2)->u16[0] && \ + (addr1)->u16[1] == (addr2)->u16[1]) +#else /* !UIP_CONF_IPV6 */ +#define uip_ipaddr_cmp(addr1, addr2) (memcmp(addr1, addr2, sizeof(uip_ip6addr_t)) == 0) +#endif /* !UIP_CONF_IPV6 */ + +/** + * Compare two IP addresses with netmasks + * + * Compares two IP addresses with netmasks. The masks are used to mask + * out the bits that are to be compared. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2, mask; + + uip_ipaddr(&mask, 255,255,255,0); + uip_ipaddr(&ipaddr1, 192,16,1,2); + uip_ipaddr(&ipaddr2, 192,16,1,3); + if(uip_ipaddr_maskcmp(&ipaddr1, &ipaddr2, &mask)) { + printf("They are the same"); + } + \endcode + * + * \param addr1 The first IP address. + * \param addr2 The second IP address. + * \param mask The netmask. + * + * \hideinitializer + */ +#if !UIP_CONF_IPV6 +#define uip_ipaddr_maskcmp(addr1, addr2, mask) \ + (((((u16_t *)addr1)[0] & ((u16_t *)mask)[0]) == \ + (((u16_t *)addr2)[0] & ((u16_t *)mask)[0])) && \ + ((((u16_t *)addr1)[1] & ((u16_t *)mask)[1]) == \ + (((u16_t *)addr2)[1] & ((u16_t *)mask)[1]))) +#else +#define uip_ipaddr_prefixcmp(addr1, addr2, length) (memcmp(addr1, addr2, length>>3) == 0) +#endif + + +/** + * Check if an address is a broadcast address for a network. + * + * Checks if an address is the broadcast address for a network. The + * network is defined by an IP address that is on the network and the + * network's netmask. + * + * \param addr The IP address. + * \param netaddr The network's IP address. + * \param netmask The network's netmask. + * + * \hideinitializer + */ +/*#define uip_ipaddr_isbroadcast(addr, netaddr, netmask) + ((uip_ipaddr_t *)(addr)).u16 & ((uip_ipaddr_t *)(addr)).u16*/ + + + +/** + * Mask out the network part of an IP address. + * + * Masks out the network part of an IP address, given the address and + * the netmask. + * + * Example: + \code + uip_ipaddr_t ipaddr1, ipaddr2, netmask; + + uip_ipaddr(&ipaddr1, 192,16,1,2); + uip_ipaddr(&netmask, 255,255,255,0); + uip_ipaddr_mask(&ipaddr2, &ipaddr1, &netmask); + \endcode + * + * In the example above, the variable "ipaddr2" will contain the IP + * address 192.168.1.0. + * + * \param dest Where the result is to be placed. + * \param src The IP address. + * \param mask The netmask. + * + * \hideinitializer + */ +#define uip_ipaddr_mask(dest, src, mask) do { \ + ((u16_t *)dest)[0] = ((u16_t *)src)[0] & ((u16_t *)mask)[0]; \ + ((u16_t *)dest)[1] = ((u16_t *)src)[1] & ((u16_t *)mask)[1]; \ + } while(0) + +/** + * Pick the first octet of an IP address. + * + * Picks out the first octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr1(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 1. + * + * \hideinitializer + */ +#define uip_ipaddr1(addr) ((addr)->u8[0]) + +/** + * Pick the second octet of an IP address. + * + * Picks out the second octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr2(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 2. + * + * \hideinitializer + */ +#define uip_ipaddr2(addr) ((addr)->u8[1]) + +/** + * Pick the third octet of an IP address. + * + * Picks out the third octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr3(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 3. + * + * \hideinitializer + */ +#define uip_ipaddr3(addr) ((addr)->u8[2]) + +/** + * Pick the fourth octet of an IP address. + * + * Picks out the fourth octet of an IP address. + * + * Example: + \code + uip_ipaddr_t ipaddr; + u8_t octet; + + uip_ipaddr(&ipaddr, 1,2,3,4); + octet = uip_ipaddr4(&ipaddr); + \endcode + * + * In the example above, the variable "octet" will contain the value 4. + * + * \hideinitializer + */ +#define uip_ipaddr4(addr) ((addr)->u8[3]) + +/** + * Convert 16-bit quantity from host byte order to network byte order. + * + * This macro is primarily used for converting constants from host + * byte order to network byte order. For converting variables to + * network byte order, use the htons() function instead. + * + * \hideinitializer + */ +#ifndef HTONS +# if UIP_BYTE_ORDER == UIP_BIG_ENDIAN +# define HTONS(n) (n) +# define HTONL(n) (n) +# else /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */ +# define HTONS(n) (u16_t)((((u16_t) (n)) << 8) | (((u16_t) (n)) >> 8)) +# define HTONL(n) (((u32_t)HTONS(n) << 16) | HTONS((u32_t)(n) >> 16)) +# endif /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */ +#else +#error "HTONS already defined!" +#endif /* HTONS */ + +/** + * Convert 16-bit quantity from host byte order to network byte order. + * + * This function is primarily used for converting variables from host + * byte order to network byte order. For converting constants to + * network byte order, use the HTONS() macro instead. + */ +#ifndef htons +u16_t htons(u16_t val); +#endif /* htons */ +#ifndef ntohs +#define ntohs htons +#endif + +#ifndef htonl +u32_t htonl(u32_t val); +#endif /* htonl */ +#ifndef ntohl +#define ntohl htonl +#endif + +/** @} */ + +/** + * Pointer to the application data in the packet buffer. + * + * This pointer points to the application data when the application is + * called. If the application wishes to send data, the application may + * use this space to write the data into before calling uip_send(). + */ +extern void *uip_appdata; + +#if UIP_URGDATA > 0 +/* u8_t *uip_urgdata: + * + * This pointer points to any urgent data that has been received. Only + * present if compiled with support for urgent data (UIP_URGDATA). + */ +extern void *uip_urgdata; +#endif /* UIP_URGDATA > 0 */ + + +/** + * \defgroup uipdrivervars Variables used in uIP device drivers + * @{ + * + * uIP has a few global variables that are used in device drivers for + * uIP. + */ + +/** + * The length of the packet in the uip_buf buffer. + * + * The global variable uip_len holds the length of the packet in the + * uip_buf buffer. + * + * When the network device driver calls the uIP input function, + * uip_len should be set to the length of the packet in the uip_buf + * buffer. + * + * When sending packets, the device driver should use the contents of + * the uip_len variable to determine the length of the outgoing + * packet. + * + */ +extern u16_t uip_len; + +/** + * The length of the extension headers + */ +extern u8_t uip_ext_len; +/** @} */ + +#if UIP_URGDATA > 0 +extern u16_t uip_urglen, uip_surglen; +#endif /* UIP_URGDATA > 0 */ + + +/** + * Representation of a uIP TCP connection. + * + * The uip_conn structure is used for identifying a connection. All + * but one field in the structure are to be considered read-only by an + * application. The only exception is the appstate field whose purpose + * is to let the application store application-specific state (e.g., + * file pointers) for the connection. The type of this field is + * configured in the "uipopt.h" header file. + */ +struct uip_conn { + uip_ipaddr_t ripaddr; /**< The IP address of the remote host. */ + + u16_t lport; /**< The local TCP port, in network byte order. */ + u16_t rport; /**< The local remote TCP port, in network byte + order. */ + + u8_t rcv_nxt[4]; /**< The sequence number that we expect to + receive next. */ + u8_t snd_nxt[4]; /**< The sequence number that was last sent by + us. */ + u16_t len; /**< Length of the data that was previously sent. */ + u16_t mss; /**< Current maximum segment size for the + connection. */ + u16_t initialmss; /**< Initial maximum segment size for the + connection. */ + u8_t sa; /**< Retransmission time-out calculation state + variable. */ + u8_t sv; /**< Retransmission time-out calculation state + variable. */ + u8_t rto; /**< Retransmission time-out. */ + u8_t tcpstateflags; /**< TCP state and flags. */ + u8_t timer; /**< The retransmission timer. */ + u8_t nrtx; /**< The number of retransmissions for the last + segment sent. */ + + /** The application state. */ + uip_tcp_appstate_t appstate; +}; + + +/** + * Pointer to the current TCP connection. + * + * The uip_conn pointer can be used to access the current TCP + * connection. + */ + +extern struct uip_conn *uip_conn; +#if UIP_TCP +/* The array containing all uIP connections. */ +extern struct uip_conn uip_conns[UIP_CONNS]; +#endif + +/** + * \addtogroup uiparch + * @{ + */ + +/** + * 4-byte array used for the 32-bit sequence number calculations. + */ +extern u8_t uip_acc32[4]; +/** @} */ + +/** + * Representation of a uIP UDP connection. + */ +struct uip_udp_conn { + uip_ipaddr_t ripaddr; /**< The IP address of the remote peer. */ + u16_t lport; /**< The local port number in network byte order. */ + u16_t rport; /**< The remote port number in network byte order. */ + u8_t ttl; /**< Default time-to-live. */ + + /** The application state. */ + uip_udp_appstate_t appstate; +}; + +/** + * The current UDP connection. + */ +extern struct uip_udp_conn *uip_udp_conn; +extern struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS]; + +struct uip_router { + int (*activate)(void); + int (*deactivate)(void); + uip_ipaddr_t *(*lookup)(uip_ipaddr_t *destipaddr, uip_ipaddr_t *nexthop); +}; + +#if UIP_CONF_ROUTER +extern const struct uip_router *uip_router; + +/** + * uIP routing driver registration function. + */ +void uip_router_register(const struct uip_router *router); +#endif /*UIP_CONF_ROUTER*/ + +#if UIP_CONF_ICMP6 +struct uip_icmp6_conn { + uip_icmp6_appstate_t appstate; +}; +extern struct uip_icmp6_conn uip_icmp6_conns; +#endif /*UIP_CONF_ICMP6*/ + +/** + * The uIP TCP/IP statistics. + * + * This is the variable in which the uIP TCP/IP statistics are gathered. + */ +#if UIP_STATISTICS == 1 +extern struct uip_stats uip_stat; +#define UIP_STAT(s) s +#else +#define UIP_STAT(s) +#endif /* UIP_STATISTICS == 1 */ + +/** + * The structure holding the TCP/IP statistics that are gathered if + * UIP_STATISTICS is set to 1. + * + */ +struct uip_stats { + struct { + uip_stats_t recv; /**< Number of received packets at the IP + layer. */ + uip_stats_t sent; /**< Number of sent packets at the IP + layer. */ + uip_stats_t forwarded;/**< Number of forwarded packets at the IP + layer. */ + uip_stats_t drop; /**< Number of dropped packets at the IP + layer. */ + uip_stats_t vhlerr; /**< Number of packets dropped due to wrong + IP version or header length. */ + uip_stats_t hblenerr; /**< Number of packets dropped due to wrong + IP length, high byte. */ + uip_stats_t lblenerr; /**< Number of packets dropped due to wrong + IP length, low byte. */ + uip_stats_t fragerr; /**< Number of packets dropped since they + were IP fragments. */ + uip_stats_t chkerr; /**< Number of packets dropped due to IP + checksum errors. */ + uip_stats_t protoerr; /**< Number of packets dropped since they + were neither ICMP, UDP nor TCP. */ + } ip; /**< IP statistics. */ + struct { + uip_stats_t recv; /**< Number of received ICMP packets. */ + uip_stats_t sent; /**< Number of sent ICMP packets. */ + uip_stats_t drop; /**< Number of dropped ICMP packets. */ + uip_stats_t typeerr; /**< Number of ICMP packets with a wrong + type. */ + uip_stats_t chkerr; /**< Number of ICMP packets with a bad + checksum. */ + } icmp; /**< ICMP statistics. */ +#if UIP_TCP + struct { + uip_stats_t recv; /**< Number of received TCP segments. */ + uip_stats_t sent; /**< Number of sent TCP segments. */ + uip_stats_t drop; /**< Number of dropped TCP segments. */ + uip_stats_t chkerr; /**< Number of TCP segments with a bad + checksum. */ + uip_stats_t ackerr; /**< Number of TCP segments with a bad ACK + number. */ + uip_stats_t rst; /**< Number of received TCP RST (reset) segments. */ + uip_stats_t rexmit; /**< Number of retransmitted TCP segments. */ + uip_stats_t syndrop; /**< Number of dropped SYNs due to too few + connections was available. */ + uip_stats_t synrst; /**< Number of SYNs for closed ports, + triggering a RST. */ + } tcp; /**< TCP statistics. */ +#endif +#if UIP_UDP + struct { + uip_stats_t drop; /**< Number of dropped UDP segments. */ + uip_stats_t recv; /**< Number of received UDP segments. */ + uip_stats_t sent; /**< Number of sent UDP segments. */ + uip_stats_t chkerr; /**< Number of UDP segments with a bad + checksum. */ + } udp; /**< UDP statistics. */ +#endif /* UIP_UDP */ +#if UIP_CONF_IPV6 + struct { + uip_stats_t drop; /**< Number of dropped ND6 packets. */ + uip_stats_t recv; /**< Number of received ND6 packets */ + uip_stats_t sent; /**< Number of sent ND6 packets */ + } nd6; +#endif /*UIP_CONF_IPV6*/ +}; + + +/*---------------------------------------------------------------------------*/ +/* All the stuff below this point is internal to uIP and should not be + * used directly by an application or by a device driver. + */ +/*---------------------------------------------------------------------------*/ + + + +/* u8_t uip_flags: + * + * When the application is called, uip_flags will contain the flags + * that are defined in this file. Please read below for more + * information. + */ +extern u8_t uip_flags; + +/* The following flags may be set in the global variable uip_flags + before calling the application callback. The UIP_ACKDATA, + UIP_NEWDATA, and UIP_CLOSE flags may both be set at the same time, + whereas the others are mutually exclusive. Note that these flags + should *NOT* be accessed directly, but only through the uIP + functions/macros. */ + +#define UIP_ACKDATA 1 /* Signifies that the outstanding data was + acked and the application should send + out new data instead of retransmitting + the last data. */ +#define UIP_NEWDATA 2 /* Flags the fact that the peer has sent + us new data. */ +#define UIP_REXMIT 4 /* Tells the application to retransmit the + data that was last sent. */ +#define UIP_POLL 8 /* Used for polling the application, to + check if the application has data that + it wants to send. */ +#define UIP_CLOSE 16 /* The remote host has closed the + connection, thus the connection has + gone away. Or the application signals + that it wants to close the + connection. */ +#define UIP_ABORT 32 /* The remote host has aborted the + connection, thus the connection has + gone away. Or the application signals + that it wants to abort the + connection. */ +#define UIP_CONNECTED 64 /* We have got a connection from a remote + host and have set up a new connection + for it, or an active connection has + been successfully established. */ + +#define UIP_TIMEDOUT 128 /* The connection has been aborted due to + too many retransmissions. */ + + +/** + * \brief process the options within a hop by hop or destination option header + * \retval 0: nothing to send, + * \retval 1: drop pkt + * \retval 2: ICMP error message to send +*/ +/*static u8_t +uip_ext_hdr_options_process(); */ + +/* uip_process(flag): + * + * The actual uIP function which does all the work. + */ +void uip_process(u8_t flag); + + /* The following flags are passed as an argument to the uip_process() + function. They are used to distinguish between the two cases where + uip_process() is called. It can be called either because we have + incoming data that should be processed, or because the periodic + timer has fired. These values are never used directly, but only in + the macros defined in this file. */ + +#define UIP_DATA 1 /* Tells uIP that there is incoming + data in the uip_buf buffer. The + length of the data is stored in the + global variable uip_len. */ +#define UIP_TIMER 2 /* Tells uIP that the periodic timer + has fired. */ +#define UIP_POLL_REQUEST 3 /* Tells uIP that a connection should + be polled. */ +#define UIP_UDP_SEND_CONN 4 /* Tells uIP that a UDP datagram + should be constructed in the + uip_buf buffer. */ +#if UIP_UDP +#define UIP_UDP_TIMER 5 +#endif /* UIP_UDP */ + +/* The TCP states used in the uip_conn->tcpstateflags. */ +#define UIP_CLOSED 0 +#define UIP_SYN_RCVD 1 +#define UIP_SYN_SENT 2 +#define UIP_ESTABLISHED 3 +#define UIP_FIN_WAIT_1 4 +#define UIP_FIN_WAIT_2 5 +#define UIP_CLOSING 6 +#define UIP_TIME_WAIT 7 +#define UIP_LAST_ACK 8 +#define UIP_TS_MASK 15 + +#define UIP_STOPPED 16 + +/* The TCP and IP headers. */ +struct uip_tcpip_hdr { +#if UIP_CONF_IPV6 + /* IPv6 header. */ + u8_t vtc, + tcflow; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IPv4 header. */ + u8_t vhl, + tos, + len[2], + ipid[2], + ipoffset[2], + ttl, + proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ + + /* TCP header. */ + u16_t srcport, + destport; + u8_t seqno[4], + ackno[4], + tcpoffset, + flags, + wnd[2]; + u16_t tcpchksum; + u8_t urgp[2]; + u8_t optdata[4]; +}; + +/* The ICMP and IP headers. */ +struct uip_icmpip_hdr { +#if UIP_CONF_IPV6 + /* IPv6 header. */ + u8_t vtc, + tcf; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IPv4 header. */ + u8_t vhl, + tos, + len[2], + ipid[2], + ipoffset[2], + ttl, + proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ + + /* ICMP header. */ + u8_t type, icode; + u16_t icmpchksum; +#if !UIP_CONF_IPV6 + u16_t id, seqno; + u8_t payload[1]; +#endif /* !UIP_CONF_IPV6 */ +}; + + +/* The UDP and IP headers. */ +struct uip_udpip_hdr { +#if UIP_CONF_IPV6 + /* IPv6 header. */ + u8_t vtc, + tcf; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IP header. */ + u8_t vhl, + tos, + len[2], + ipid[2], + ipoffset[2], + ttl, + proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ + + /* UDP header. */ + u16_t srcport, + destport; + u16_t udplen; + u16_t udpchksum; +}; + +/* + * In IPv6 the length of the L3 headers before the transport header is + * not fixed, due to the possibility to include extension option headers + * after the IP header. hence we split here L3 and L4 headers + */ +/* The IP header */ +struct uip_ip_hdr { +#if UIP_CONF_IPV6 + /* IPV6 header */ + u8_t vtc; + u8_t tcflow; + u16_t flow; + u8_t len[2]; + u8_t proto, ttl; + uip_ip6addr_t srcipaddr, destipaddr; +#else /* UIP_CONF_IPV6 */ + /* IPV4 header */ + u8_t vhl, + tos, + len[2], + ipid[2], + ipoffset[2], + ttl, + proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +#endif /* UIP_CONF_IPV6 */ +}; + + +/* + * IPv6 extension option headers: we are able to process + * the 4 extension headers defined in RFC2460 (IPv6): + * - Hop by hop option header, destination option header: + * These two are not used by any core IPv6 protocol, hence + * we just read them and go to the next. They convey options, + * the options defined in RFC2460 are Pad1 and PadN, which do + * some padding, and that we do not need to read (the length + * field in the header is enough) + * - Routing header: this one is most notably used by MIPv6, + * which we do not implement, hence we just read it and go + * to the next + * - Fragmentation header: we read this header and are able to + * reassemble packets + * + * We do not offer any means to send packets with extension headers + * + * We do not implement Authentication and ESP headers, which are + * used in IPSec and defined in RFC4302,4303,4305,4385 + */ +/* common header part */ +struct uip_ext_hdr { + u8_t next; + u8_t len; +}; + +/* Hop by Hop option header */ +struct uip_hbho_hdr { + u8_t next; + u8_t len; +}; + +/* destination option header */ +struct uip_desto_hdr { + u8_t next; + u8_t len; +}; + +/* We do not define structures for PAD1 and PADN options */ + +/* + * routing header + * the routing header as 4 common bytes, then routing header type + * specific data there are several types of routing header. Type 0 was + * deprecated as per RFC5095 most notable other type is 2, used in + * RFC3775 (MIPv6) here we do not implement MIPv6, so we just need to + * parse the 4 first bytes + */ +struct uip_routing_hdr { + u8_t next; + u8_t len; + u8_t routing_type; + u8_t seg_left; +}; + +/* fragmentation header */ +struct uip_frag_hdr { + u8_t next; + u8_t res; + u16_t offsetresmore; + u32_t id; +}; + +/* + * an option within the destination or hop by hop option headers + * it contains type an length, which is true for all options but PAD1 + */ +struct uip_ext_hdr_opt { + u8_t type; + u8_t len; +}; + +/* PADN option */ +struct uip_ext_hdr_opt_padn { + u8_t opt_type; + u8_t opt_len; +}; + +/* TCP header */ +struct uip_tcp_hdr { + u16_t srcport; + u16_t destport; + u8_t seqno[4]; + u8_t ackno[4]; + u8_t tcpoffset; + u8_t flags; + u8_t wnd[2]; + u16_t tcpchksum; + u8_t urgp[2]; + u8_t optdata[4]; +}; + +/* The ICMP headers. */ +struct uip_icmp_hdr { + u8_t type, icode; + u16_t icmpchksum; +#if !UIP_CONF_IPV6 + u16_t id, seqno; +#endif /* !UIP_CONF_IPV6 */ +}; + + +/* The UDP headers. */ +struct uip_udp_hdr { + u16_t srcport; + u16_t destport; + u16_t udplen; + u16_t udpchksum; +}; + + +/** + * The buffer size available for user data in the \ref uip_buf buffer. + * + * This macro holds the available size for user data in the \ref + * uip_buf buffer. The macro is intended to be used for checking + * bounds of available user data. + * + * Example: + \code + snprintf(uip_appdata, UIP_APPDATA_SIZE, "%u\n", i); + \endcode + * + * \hideinitializer + */ +#define UIP_APPDATA_SIZE (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN) +#define UIP_APPDATA_PTR (void *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN] + +#define UIP_PROTO_ICMP 1 +#define UIP_PROTO_TCP 6 +#define UIP_PROTO_UDP 17 +#define UIP_PROTO_ICMP6 58 + + +#if UIP_CONF_IPV6 +/** @{ */ +/** \brief extension headers types */ +#define UIP_PROTO_HBHO 0 +#define UIP_PROTO_DESTO 60 +#define UIP_PROTO_ROUTING 43 +#define UIP_PROTO_FRAG 44 +#define UIP_PROTO_NONE 59 +/** @} */ + +/** @{ */ +/** \brief Destination and Hop By Hop extension headers option types */ +#define UIP_EXT_HDR_OPT_PAD1 0 +#define UIP_EXT_HDR_OPT_PADN 1 +/** @} */ + +/** @{ */ +/** + * \brief Bitmaps for extension header processing + * + * When processing extension headers, we should record somehow which one we + * see, because you cannot have twice the same header, except for destination + * We store all this in one u8_t bitmap one bit for each header expected. The + * order in the bitmap is the order recommended in RFC2460 + */ +#define UIP_EXT_HDR_BITMAP_HBHO 0x01 +#define UIP_EXT_HDR_BITMAP_DESTO1 0x02 +#define UIP_EXT_HDR_BITMAP_ROUTING 0x04 +#define UIP_EXT_HDR_BITMAP_FRAG 0x08 +#define UIP_EXT_HDR_BITMAP_AH 0x10 +#define UIP_EXT_HDR_BITMAP_ESP 0x20 +#define UIP_EXT_HDR_BITMAP_DESTO2 0x40 +/** @} */ + + +#endif /* UIP_CONF_IPV6 */ + + +/* Header sizes. */ +#if UIP_CONF_IPV6 +#define UIP_IPH_LEN 40 +#define UIP_FRAGH_LEN 8 +#else /* UIP_CONF_IPV6 */ +#define UIP_IPH_LEN 20 /* Size of IP header */ +#endif /* UIP_CONF_IPV6 */ + +#define UIP_UDPH_LEN 8 /* Size of UDP header */ +#define UIP_TCPH_LEN 20 /* Size of TCP header */ +#ifdef UIP_IPH_LEN +#define UIP_ICMPH_LEN 4 /* Size of ICMP header */ +#endif +#define UIP_IPUDPH_LEN (UIP_UDPH_LEN + UIP_IPH_LEN) /* Size of IP + + * UDP + * header */ +#define UIP_IPTCPH_LEN (UIP_TCPH_LEN + UIP_IPH_LEN) /* Size of IP + + * TCP + * header */ +#define UIP_TCPIP_HLEN UIP_IPTCPH_LEN +#define UIP_IPICMPH_LEN (UIP_IPH_LEN + UIP_ICMPH_LEN) /* size of ICMP + + IP header */ +#define UIP_LLIPH_LEN (UIP_LLH_LEN + UIP_IPH_LEN) /* size of L2 + + IP header */ +#if UIP_CONF_IPV6 +/** + * The sums below are quite used in ND. When used for uip_buf, we + * include link layer length when used for uip_len, we do not, hence + * we need values with and without LLH_LEN we do not use capital + * letters as these values are variable + */ +#define uip_l2_l3_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len) +#define uip_l2_l3_icmp_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN) +#define uip_l3_hdr_len (UIP_IPH_LEN + uip_ext_len) +#define uip_l3_icmp_hdr_len (UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN) +#endif /*UIP_CONF_IPV6*/ + + +#if UIP_FIXEDADDR +extern const uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr; +#else /* UIP_FIXEDADDR */ +extern uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr; +#endif /* UIP_FIXEDADDR */ +extern const uip_ipaddr_t uip_broadcast_addr; +extern const uip_ipaddr_t uip_all_zeroes_addr; + +#if UIP_FIXEDETHADDR +extern const uip_lladdr_t uip_lladdr; +#else +extern uip_lladdr_t uip_lladdr; +#endif + + + + +#ifdef UIP_CONF_IPV6 +/** + * \brief Is IPv6 address a the unspecified address + * a is of type uip_ipaddr_t + */ +#define uip_is_addr_unspecified(a) \ + ((((a)->u16[0]) == 0) && \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u16[7]) == 0)) + +/** \brief Is IPv6 address a the link local all-nodes multicast address */ +#define uip_is_addr_linklocal_allnodes_mcast(a) \ + ((((a)->u8[0]) == 0xff) && \ + (((a)->u8[1]) == 0x02) && \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u8[14]) == 0) && \ + (((a)->u8[15]) == 0x01)) + +/** \brief set IP address a to unspecified */ +#define uip_create_unspecified(a) uip_ip6addr(a, 0, 0, 0, 0, 0, 0, 0, 0) + +/** \brief set IP address a to the link local all-nodes multicast address */ +#define uip_create_linklocal_allnodes_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0001) + +/** \brief set IP address a to the link local all-routers multicast address */ +#define uip_create_linklocal_allrouters_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0002) + +/** + * \brief is addr (a) a solicited node multicast address, see RFC3513 + * a is of type uip_ipaddr_t* + */ +#define uip_is_addr_solicited_node(a) \ + ((((a)->u8[0]) == 0xFF) && \ + (((a)->u8[1]) == 0x02) && \ + (((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 1) && \ + (((a)->u8[12]) == 0xFF)) + +/** + * \briefput in b the solicited node address corresponding to address a + * both a and b are of type uip_ipaddr_t* + * */ +#define uip_create_solicited_node(a, b) \ + (((b)->u8[0]) = 0xFF); \ + (((b)->u8[1]) = 0x02); \ + (((b)->u16[1]) = 0); \ + (((b)->u16[2]) = 0); \ + (((b)->u16[3]) = 0); \ + (((b)->u16[4]) = 0); \ + (((b)->u8[10]) = 0); \ + (((b)->u8[11]) = 0x01); \ + (((b)->u8[12]) = 0xFF); \ + (((b)->u8[13]) = ((a)->u8[13])); \ + (((b)->u16[7]) = ((a)->u16[7])) + +/** + * \brief is addr (a) a link local unicast address, see RFC3513 + * i.e. is (a) on prefix FE80::/10 + * a is of type uip_ipaddr_t* + */ +#define uip_is_addr_link_local(a) \ + ((((a)->u8[0]) == 0xFE) && \ + (((a)->u8[1]) == 0x80)) + +/** + * \brief was addr (a) forged based on the mac address m + * a type is uip_ipaddr_t + * m type is uiplladdr_t + */ +#if UIP_CONF_LL_802154 +#define uip_is_addr_mac_addr_based(a, m) \ + ((((a)->u8[8]) == (((m)->addr[0]) ^ 0x02)) && \ + (((a)->u8[9]) == (m)->addr[1]) && \ + (((a)->u8[10]) == (m)->addr[2]) && \ + (((a)->u8[11]) == (m)->addr[3]) && \ + (((a)->u8[12]) == (m)->addr[4]) && \ + (((a)->u8[13]) == (m)->addr[5]) && \ + (((a)->u8[14]) == (m)->addr[6]) && \ + (((a)->u8[15]) == (m)->addr[7])) +#else + +#define uip_is_addr_mac_addr_based(a, m) \ + ((((a)->u8[8]) == (((m)->addr[0]) | 0x02)) && \ + (((a)->u8[9]) == (m)->addr[1]) && \ + (((a)->u8[10]) == (m)->addr[2]) && \ + (((a)->u8[11]) == 0xff) && \ + (((a)->u8[12]) == 0xfe) && \ + (((a)->u8[13]) == (m)->addr[3]) && \ + (((a)->u8[14]) == (m)->addr[4]) && \ + (((a)->u8[15]) == (m)->addr[5])) + +#endif /*UIP_CONF_LL_802154*/ + +/** + * \brief is address a multicast address, see RFC 3513 + * a is of type uip_ipaddr_t* + * */ +#define uip_is_addr_mcast(a) \ + (((a)->u8[0]) == 0xFF) + +/** + * \brief is group-id of multicast address a + * the all nodes group-id + */ +#define uip_is_mcast_group_id_all_nodes(a) \ + ((((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u8[14]) == 0) && \ + (((a)->u8[15]) == 1)) + +/** + * \brief is group-id of multicast address a + * the all routers group-id + */ +#define uip_is_mcast_group_id_all_routers(a) \ + ((((a)->u16[1]) == 0) && \ + (((a)->u16[2]) == 0) && \ + (((a)->u16[3]) == 0) && \ + (((a)->u16[4]) == 0) && \ + (((a)->u16[5]) == 0) && \ + (((a)->u16[6]) == 0) && \ + (((a)->u8[14]) == 0) && \ + (((a)->u8[15]) == 2)) + + +#endif /*UIP_CONF_IPV6*/ + +/** + * Calculate the Internet checksum over a buffer. + * + * The Internet checksum is the one's complement of the one's + * complement sum of all 16-bit words in the buffer. + * + * See RFC1071. + * + * \param buf A pointer to the buffer over which the checksum is to be + * computed. + * + * \param len The length of the buffer over which the checksum is to + * be computed. + * + * \return The Internet checksum of the buffer. + */ +u16_t uip_chksum(u16_t *buf, u16_t len); + +/** + * Calculate the IP header checksum of the packet header in uip_buf. + * + * The IP header checksum is the Internet checksum of the 20 bytes of + * the IP header. + * + * \return The IP header checksum of the IP header in the uip_buf + * buffer. + */ +u16_t uip_ipchksum(void); + +/** + * Calculate the TCP checksum of the packet in uip_buf and uip_appdata. + * + * The TCP checksum is the Internet checksum of data contents of the + * TCP segment, and a pseudo-header as defined in RFC793. + * + * \return The TCP checksum of the TCP segment in uip_buf and pointed + * to by uip_appdata. + */ +u16_t uip_tcpchksum(void); + +/** + * Calculate the UDP checksum of the packet in uip_buf and uip_appdata. + * + * The UDP checksum is the Internet checksum of data contents of the + * UDP segment, and a pseudo-header as defined in RFC768. + * + * \return The UDP checksum of the UDP segment in uip_buf and pointed + * to by uip_appdata. + */ +u16_t uip_udpchksum(void); + +/** + * Calculate the ICMP checksum of the packet in uip_buf. + * + * \return The ICMP checksum of the ICMP packet in uip_buf + */ +u16_t uip_icmp6chksum(void); + + +#endif /* __UIP_H__ */ + + +/** @} */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uip_arp.c b/lib/lufa/Projects/Webserver/Lib/uip/uip_arp.c new file mode 100644 index 000000000..fcb783b14 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/uip_arp.c @@ -0,0 +1,432 @@ +/** + * \addtogroup uip + * @{ + */ + +/** + * \defgroup uiparp uIP Address Resolution Protocol + * @{ + * + * The Address Resolution Protocol ARP is used for mapping between IP + * addresses and link level addresses such as the Ethernet MAC + * addresses. ARP uses broadcast queries to ask for the link level + * address of a known IP address and the host which is configured with + * the IP address for which the query was meant, will respond with its + * link level address. + * + * \note This ARP implementation only supports Ethernet. + */ + +/** + * \file + * Implementation of the ARP Address Resolution Protocol. + * \author Adam Dunkels <adam@dunkels.com> + * + */ + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uip_arp.c,v 1.5 2008/02/07 01:35:00 adamdunkels Exp $ + * + */ + + +#include "uip_arp.h" + +#include <string.h> + +struct arp_hdr { + struct uip_eth_hdr ethhdr; + u16_t hwtype; + u16_t protocol; + u8_t hwlen; + u8_t protolen; + u16_t opcode; + struct uip_eth_addr shwaddr; + uip_ipaddr_t sipaddr; + struct uip_eth_addr dhwaddr; + uip_ipaddr_t dipaddr; +}; + +struct ethip_hdr { + struct uip_eth_hdr ethhdr; + /* IP header. */ + u8_t vhl, + tos, + len[2], + ipid[2], + ipoffset[2], + ttl, + proto; + u16_t ipchksum; + uip_ipaddr_t srcipaddr, destipaddr; +}; + +#define ARP_REQUEST 1 +#define ARP_REPLY 2 + +#define ARP_HWTYPE_ETH 1 + +struct arp_entry { + uip_ipaddr_t ipaddr; + struct uip_eth_addr ethaddr; + u8_t time; +}; + +static const struct uip_eth_addr broadcast_ethaddr = + {{0xff,0xff,0xff,0xff,0xff,0xff}}; +static const u16_t broadcast_ipaddr[2] = {0xffff,0xffff}; + +static struct arp_entry arp_table[UIP_ARPTAB_SIZE]; +static uip_ipaddr_t ipaddr; +static u8_t i, c; + +static u8_t arptime; +static u8_t tmpage; + +#define BUF ((struct arp_hdr *)&uip_buf[0]) +#define IPBUF ((struct ethip_hdr *)&uip_buf[0]) + +#define DEBUG 0 +#if DEBUG +#include <stdio.h> +#define PRINTF(...) printf(__VA_ARGS__) +#else +#define PRINTF(...) +#endif + +/*-----------------------------------------------------------------------------------*/ +/** + * Initialize the ARP module. + * + */ +/*-----------------------------------------------------------------------------------*/ +void +uip_arp_init(void) +{ + for(i = 0; i < UIP_ARPTAB_SIZE; ++i) { + memset(&arp_table[i].ipaddr, 0, 4); + } +} +/*-----------------------------------------------------------------------------------*/ +/** + * Periodic ARP processing function. + * + * This function performs periodic timer processing in the ARP module + * and should be called at regular intervals. The recommended interval + * is 10 seconds between the calls. + * + */ +/*-----------------------------------------------------------------------------------*/ +void +uip_arp_timer(void) +{ + struct arp_entry *tabptr = NULL; + + ++arptime; + for(i = 0; i < UIP_ARPTAB_SIZE; ++i) { + tabptr = &arp_table[i]; + if(uip_ipaddr_cmp(&tabptr->ipaddr, &uip_all_zeroes_addr) && + arptime - tabptr->time >= UIP_ARP_MAXAGE) { + memset(&tabptr->ipaddr, 0, 4); + } + } + +} +/*-----------------------------------------------------------------------------------*/ +static void +uip_arp_update(uip_ipaddr_t *ipaddr, struct uip_eth_addr *ethaddr) +{ + register struct arp_entry *tabptr = NULL; + /* Walk through the ARP mapping table and try to find an entry to + update. If none is found, the IP -> MAC address mapping is + inserted in the ARP table. */ + for(i = 0; i < UIP_ARPTAB_SIZE; ++i) { + + tabptr = &arp_table[i]; + /* Only check those entries that are actually in use. */ + if(!uip_ipaddr_cmp(&tabptr->ipaddr, &uip_all_zeroes_addr)) { + + /* Check if the source IP address of the incoming packet matches + the IP address in this ARP table entry. */ + if(uip_ipaddr_cmp(ipaddr, &tabptr->ipaddr)) { + + /* An old entry found, update this and return. */ + memcpy(tabptr->ethaddr.addr, ethaddr->addr, 6); + tabptr->time = arptime; + + return; + } + } + } + + /* If we get here, no existing ARP table entry was found, so we + create one. */ + + /* First, we try to find an unused entry in the ARP table. */ + for(i = 0; i < UIP_ARPTAB_SIZE; ++i) { + tabptr = &arp_table[i]; + if(uip_ipaddr_cmp(&tabptr->ipaddr, &uip_all_zeroes_addr)) { + break; + } + } + + /* If no unused entry is found, we try to find the oldest entry and + throw it away. */ + if(i == UIP_ARPTAB_SIZE) { + tmpage = 0; + c = 0; + for(i = 0; i < UIP_ARPTAB_SIZE; ++i) { + tabptr = &arp_table[i]; + if(arptime - tabptr->time > tmpage) { + tmpage = arptime - tabptr->time; + c = i; + } + } + i = c; + tabptr = &arp_table[i]; + } + + /* Now, i is the ARP table entry which we will fill with the new + information. */ + uip_ipaddr_copy(&tabptr->ipaddr, ipaddr); + memcpy(tabptr->ethaddr.addr, ethaddr->addr, 6); + tabptr->time = arptime; +} +/*-----------------------------------------------------------------------------------*/ +/** + * ARP processing for incoming IP packets + * + * This function should be called by the device driver when an IP + * packet has been received. The function will check if the address is + * in the ARP cache, and if so the ARP cache entry will be + * refreshed. If no ARP cache entry was found, a new one is created. + * + * This function expects an IP packet with a prepended Ethernet header + * in the uip_buf[] buffer, and the length of the packet in the global + * variable uip_len. + */ +/*-----------------------------------------------------------------------------------*/ +#if 0 +void +uip_arp_ipin(void) +{ + uip_len -= sizeof(struct uip_eth_hdr); + + /* Only insert/update an entry if the source IP address of the + incoming IP packet comes from a host on the local network. */ + if((IPBUF->srcipaddr[0] & uip_netmask[0]) != + (uip_hostaddr[0] & uip_netmask[0])) { + return; + } + if((IPBUF->srcipaddr[1] & uip_netmask[1]) != + (uip_hostaddr[1] & uip_netmask[1])) { + return; + } + uip_arp_update(IPBUF->srcipaddr, &(IPBUF->ethhdr.src)); + + return; +} +#endif /* 0 */ +/*-----------------------------------------------------------------------------------*/ +/** + * ARP processing for incoming ARP packets. + * + * This function should be called by the device driver when an ARP + * packet has been received. The function will act differently + * depending on the ARP packet type: if it is a reply for a request + * that we previously sent out, the ARP cache will be filled in with + * the values from the ARP reply. If the incoming ARP packet is an ARP + * request for our IP address, an ARP reply packet is created and put + * into the uip_buf[] buffer. + * + * When the function returns, the value of the global variable uip_len + * indicates whether the device driver should send out a packet or + * not. If uip_len is zero, no packet should be sent. If uip_len is + * non-zero, it contains the length of the outbound packet that is + * present in the uip_buf[] buffer. + * + * This function expects an ARP packet with a prepended Ethernet + * header in the uip_buf[] buffer, and the length of the packet in the + * global variable uip_len. + */ +/*-----------------------------------------------------------------------------------*/ +void +uip_arp_arpin(void) +{ + if(uip_len < sizeof(struct arp_hdr)) { + uip_len = 0; + return; + } + uip_len = 0; + + switch(BUF->opcode) { + case HTONS(ARP_REQUEST): + /* ARP request. If it asked for our address, we send out a + reply. */ + /* if(BUF->dipaddr[0] == uip_hostaddr[0] && + BUF->dipaddr[1] == uip_hostaddr[1]) {*/ + PRINTF("uip_arp_arpin: request for %d.%d.%d.%d (we are %d.%d.%d.%d)\n", + BUF->dipaddr.u8[0], BUF->dipaddr.u8[1], + BUF->dipaddr.u8[2], BUF->dipaddr.u8[3], + uip_hostaddr.u8[0], uip_hostaddr.u8[1], + uip_hostaddr.u8[2], uip_hostaddr.u8[3]); + if(uip_ipaddr_cmp(&BUF->dipaddr, &uip_hostaddr)) { + /* First, we register the one who made the request in our ARP + table, since it is likely that we will do more communication + with this host in the future. */ + uip_arp_update(&BUF->sipaddr, &BUF->shwaddr); + + BUF->opcode = HTONS(ARP_REPLY); + + memcpy(BUF->dhwaddr.addr, BUF->shwaddr.addr, 6); + memcpy(BUF->shwaddr.addr, uip_ethaddr.addr, 6); + memcpy(BUF->ethhdr.src.addr, uip_ethaddr.addr, 6); + memcpy(BUF->ethhdr.dest.addr, BUF->dhwaddr.addr, 6); + + uip_ipaddr_copy(&BUF->dipaddr, &BUF->sipaddr); + uip_ipaddr_copy(&BUF->sipaddr, &uip_hostaddr); + + BUF->ethhdr.type = HTONS(UIP_ETHTYPE_ARP); + uip_len = sizeof(struct arp_hdr); + } + break; + case HTONS(ARP_REPLY): + /* ARP reply. We insert or update the ARP table if it was meant + for us. */ + if(uip_ipaddr_cmp(&BUF->dipaddr, &uip_hostaddr)) { + uip_arp_update(&BUF->sipaddr, &BUF->shwaddr); + } + break; + } + + return; +} +/*-----------------------------------------------------------------------------------*/ +/** + * Prepend Ethernet header to an outbound IP packet and see if we need + * to send out an ARP request. + * + * This function should be called before sending out an IP packet. The + * function checks the destination IP address of the IP packet to see + * what Ethernet MAC address that should be used as a destination MAC + * address on the Ethernet. + * + * If the destination IP address is in the local network (determined + * by logical ANDing of netmask and our IP address), the function + * checks the ARP cache to see if an entry for the destination IP + * address is found. If so, an Ethernet header is prepended and the + * function returns. If no ARP cache entry is found for the + * destination IP address, the packet in the uip_buf[] is replaced by + * an ARP request packet for the IP address. The IP packet is dropped + * and it is assumed that they higher level protocols (e.g., TCP) + * eventually will retransmit the dropped packet. + * + * If the destination IP address is not on the local network, the IP + * address of the default router is used instead. + * + * When the function returns, a packet is present in the uip_buf[] + * buffer, and the length of the packet is in the global variable + * uip_len. + */ +/*-----------------------------------------------------------------------------------*/ +void +uip_arp_out(void) +{ + struct arp_entry *tabptr = NULL; + + /* Find the destination IP address in the ARP table and construct + the Ethernet header. If the destination IP address isn't on the + local network, we use the default router's IP address instead. + + If not ARP table entry is found, we overwrite the original IP + packet with an ARP request for the IP address. */ + + /* First check if destination is a local broadcast. */ + if(uip_ipaddr_cmp(&IPBUF->destipaddr, &uip_broadcast_addr)) { + memcpy(IPBUF->ethhdr.dest.addr, broadcast_ethaddr.addr, 6); + } else { + /* Check if the destination address is on the local network. */ + if(!uip_ipaddr_maskcmp(&IPBUF->destipaddr, &uip_hostaddr, &uip_netmask)) { + /* Destination address was not on the local network, so we need to + use the default router's IP address instead of the destination + address when determining the MAC address. */ + uip_ipaddr_copy(&ipaddr, &uip_draddr); + } else { + /* Else, we use the destination IP address. */ + uip_ipaddr_copy(&ipaddr, &IPBUF->destipaddr); + } + + for(i = 0; i < UIP_ARPTAB_SIZE; ++i) { + tabptr = &arp_table[i]; + if(uip_ipaddr_cmp(&ipaddr, &tabptr->ipaddr)) { + break; + } + } + + if(i == UIP_ARPTAB_SIZE) { + /* The destination address was not in our ARP table, so we + overwrite the IP packet with an ARP request. */ + + memset(BUF->ethhdr.dest.addr, 0xff, 6); + memset(BUF->dhwaddr.addr, 0x00, 6); + memcpy(BUF->ethhdr.src.addr, uip_ethaddr.addr, 6); + memcpy(BUF->shwaddr.addr, uip_ethaddr.addr, 6); + + uip_ipaddr_copy(&BUF->dipaddr, &ipaddr); + uip_ipaddr_copy(&BUF->sipaddr, &uip_hostaddr); + BUF->opcode = HTONS(ARP_REQUEST); /* ARP request. */ + BUF->hwtype = HTONS(ARP_HWTYPE_ETH); + BUF->protocol = HTONS(UIP_ETHTYPE_IP); + BUF->hwlen = 6; + BUF->protolen = 4; + BUF->ethhdr.type = HTONS(UIP_ETHTYPE_ARP); + + uip_appdata = &uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN]; + + uip_len = sizeof(struct arp_hdr); + return; + } + + /* Build an ethernet header. */ + memcpy(IPBUF->ethhdr.dest.addr, tabptr->ethaddr.addr, 6); + } + memcpy(IPBUF->ethhdr.src.addr, uip_ethaddr.addr, 6); + + IPBUF->ethhdr.type = HTONS(UIP_ETHTYPE_IP); + + uip_len += sizeof(struct uip_eth_hdr); +} +/*-----------------------------------------------------------------------------------*/ + +/** @} */ +/** @} */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uip_arp.h b/lib/lufa/Projects/Webserver/Lib/uip/uip_arp.h new file mode 100644 index 000000000..4e78ce7b7 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/uip_arp.h @@ -0,0 +1,146 @@ +/** + * \addtogroup uip + * @{ + */ + +/** + * \addtogroup uiparp + * @{ + */ + +/** + * \file + * Macros and definitions for the ARP module. + * \author Adam Dunkels <adam@dunkels.com> + */ + + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uip_arp.h,v 1.2 2006/08/26 23:58:45 oliverschmidt Exp $ + * + */ + +#ifndef __UIP_ARP_H__ +#define __UIP_ARP_H__ + +#include "uip.h" + + +extern struct uip_eth_addr uip_ethaddr; + +/** + * The Ethernet header. + */ +struct uip_eth_hdr { + struct uip_eth_addr dest; + struct uip_eth_addr src; + u16_t type; +}; + +#define UIP_ETHTYPE_ARP 0x0806 +#define UIP_ETHTYPE_IP 0x0800 +#define UIP_ETHTYPE_IPV6 0x86dd + + +/* The uip_arp_init() function must be called before any of the other + ARP functions. */ +void uip_arp_init(void); + +/* The uip_arp_ipin() function should be called whenever an IP packet + arrives from the Ethernet. This function refreshes the ARP table or + inserts a new mapping if none exists. The function assumes that an + IP packet with an Ethernet header is present in the uip_buf buffer + and that the length of the packet is in the uip_len variable. */ +/*void uip_arp_ipin(void);*/ +#define uip_arp_ipin() + +/* The uip_arp_arpin() should be called when an ARP packet is received + by the Ethernet driver. This function also assumes that the + Ethernet frame is present in the uip_buf buffer. When the + uip_arp_arpin() function returns, the contents of the uip_buf + buffer should be sent out on the Ethernet if the uip_len variable + is > 0. */ +void uip_arp_arpin(void); + +/* The uip_arp_out() function should be called when an IP packet + should be sent out on the Ethernet. This function creates an + Ethernet header before the IP header in the uip_buf buffer. The + Ethernet header will have the correct Ethernet MAC destination + address filled in if an ARP table entry for the destination IP + address (or the IP address of the default router) is present. If no + such table entry is found, the IP packet is overwritten with an ARP + request and we rely on TCP to retransmit the packet that was + overwritten. In any case, the uip_len variable holds the length of + the Ethernet frame that should be transmitted. */ +void uip_arp_out(void); + +/* The uip_arp_timer() function should be called every ten seconds. It + is responsible for flushing old entries in the ARP table. */ +void uip_arp_timer(void); + +/** @} */ + +/** + * \addtogroup uipconffunc + * @{ + */ + + +/** + * Specifiy the Ethernet MAC address. + * + * The ARP code needs to know the MAC address of the Ethernet card in + * order to be able to respond to ARP queries and to generate working + * Ethernet headers. + * + * \note This macro only specifies the Ethernet MAC address to the ARP + * code. It cannot be used to change the MAC address of the Ethernet + * card. + * + * \param eaddr A pointer to a struct uip_eth_addr containing the + * Ethernet MAC address of the Ethernet card. + * + * \hideinitializer + */ +#define uip_setethaddr(eaddr) do {uip_ethaddr.addr[0] = eaddr.addr[0]; \ + uip_ethaddr.addr[1] = eaddr.addr[1];\ + uip_ethaddr.addr[2] = eaddr.addr[2];\ + uip_ethaddr.addr[3] = eaddr.addr[3];\ + uip_ethaddr.addr[4] = eaddr.addr[4];\ + uip_ethaddr.addr[5] = eaddr.addr[5];} while(0) + +/** @} */ + + +#endif /* __UIP_ARP_H__ */ +/** @} */ + diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uipopt.h b/lib/lufa/Projects/Webserver/Lib/uip/uipopt.h new file mode 100644 index 000000000..520c03f25 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Lib/uip/uipopt.h @@ -0,0 +1,740 @@ +/** + * \addtogroup uip + * @{ + */ + +/** + * \defgroup uipopt Configuration options for uIP + * @{ + * + * uIP is configured using the per-project configuration file + * "uipopt.h". This file contains all compile-time options for uIP and + * should be tweaked to match each specific project. The uIP + * distribution contains a documented example "uipopt.h" that can be + * copied and modified for each project. + */ + +/** + * \file + * Configuration options for uIP. + * \author Adam Dunkels <adam@dunkels.com> + * + * This file is used for tweaking various configuration options for + * uIP. You should make a copy of this file into one of your project's + * directories instead of editing this example "uipopt.h" file that + * comes with the uIP distribution. + */ + +/* + * Copyright (c) 2001-2003, Adam Dunkels. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the uIP TCP/IP stack. + * + * $Id: uipopt.h,v 1.11 2009/04/10 00:37:48 adamdunkels Exp $ + * + */ + +#ifndef __UIPOPT_H__ +#define __UIPOPT_H__ + +#include "Config/AppConfig.h" + +#ifndef UIP_LITTLE_ENDIAN +#define UIP_LITTLE_ENDIAN 3412 +#endif /* UIP_LITTLE_ENDIAN */ +#ifndef UIP_BIG_ENDIAN +#define UIP_BIG_ENDIAN 1234 +#endif /* UIP_BIG_ENDIAN */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptstaticconf Static configuration options + * @{ + * + * These configuration options can be used for setting the IP address + * settings statically, but only if UIP_FIXEDADDR is set to 1. The + * configuration options for a specific node includes IP address, + * netmask and default router as well as the Ethernet address. The + * netmask, default router and Ethernet address are applicable only + * if uIP should be run over Ethernet. + * + * This options are meaningful only for the IPv4 code. + * + * All of these should be changed to suit your project. + */ + +/** + * Determines if uIP should use a fixed IP address or not. + * + * If uIP should use a fixed IP address, the settings are set in the + * uipopt.h file. If not, the macros uip_sethostaddr(), + * uip_setdraddr() and uip_setnetmask() should be used instead. + * + * \hideinitializer + */ +#define UIP_FIXEDADDR 0 + +/** + * Ping IP address assignment. + * + * uIP uses a "ping" packets for setting its own IP address if this + * option is set. If so, uIP will start with an empty IP address and + * the destination IP address of the first incoming "ping" (ICMP echo) + * packet will be used for setting the hosts IP address. + * + * \note This works only if UIP_FIXEDADDR is 0. + * + * \hideinitializer + */ +#ifdef UIP_CONF_PINGADDRCONF +#define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF +#else /* UIP_CONF_PINGADDRCONF */ +#define UIP_PINGADDRCONF 0 +#endif /* UIP_CONF_PINGADDRCONF */ + + +/** + * Specifies if the uIP ARP module should be compiled with a fixed + * Ethernet MAC address or not. + * + * If this configuration option is 0, the macro uip_setethaddr() can + * be used to specify the Ethernet address at run-time. + * + * \hideinitializer + */ +#define UIP_FIXEDETHADDR 0 + +/** @} */ +/*------------------------------------------------------------------------------*/ +/** + * \defgroup uipoptip IP configuration options + * @{ + * + */ +/** + * The IP TTL (time to live) of IP packets sent by uIP. + * + * This should normally not be changed. + */ +#define UIP_TTL 64 + +/** + * The maximum time an IP fragment should wait in the reassembly + * buffer before it is dropped. + * + */ +#define UIP_REASS_MAXAGE 60 /*60s*/ + +/** + * Turn on support for IP packet reassembly. + * + * uIP supports reassembly of fragmented IP packets. This features + * requires an additional amount of RAM to hold the reassembly buffer + * and the reassembly code size is approximately 700 bytes. The + * reassembly buffer is of the same size as the uip_buf buffer + * (configured by UIP_BUFSIZE). + * + * \note IP packet reassembly is not heavily tested. + * + * \hideinitializer + */ +#ifdef UIP_CONF_REASSEMBLY +#define UIP_REASSEMBLY UIP_CONF_REASSEMBLY +#else /* UIP_CONF_REASSEMBLY */ +#define UIP_REASSEMBLY 0 +#endif /* UIP_CONF_REASSEMBLY */ +/** @} */ + +/*------------------------------------------------------------------------------*/ +/** + * \defgroup uipoptipv6 IPv6 configuration options + * @{ + * + */ + +/** The maximum transmission unit at the IP Layer*/ +#define UIP_LINK_MTU 1280 + +#ifndef UIP_CONF_IPV6 +/** Do we use IPv6 or not (default: no) */ +#define UIP_CONF_IPV6 0 +#endif + +#ifndef UIP_CONF_IPV6_QUEUE_PKT +/** Do we do per %neighbor queuing during address resolution (default: no) */ +#define UIP_CONF_IPV6_QUEUE_PKT 0 +#endif + +#ifndef UIP_CONF_IPV6_CHECKS +/** Do we do IPv6 consistency checks (highly recommended, default: yes) */ +#define UIP_CONF_IPV6_CHECKS 1 +#endif + +#ifndef UIP_CONF_IPV6_REASSEMBLY +/** Do we do IPv6 fragmentation (default: no) */ +#define UIP_CONF_IPV6_REASSEMBLY 0 +#endif + +#ifndef UIP_CONF_NETIF_MAX_ADDRESSES +/** Default number of IPv6 addresses associated to the node's interface */ +#define UIP_CONF_NETIF_MAX_ADDRESSES 3 +#endif + +#ifndef UIP_CONF_ND6_MAX_PREFIXES +/** Default number of IPv6 prefixes associated to the node's interface */ +#define UIP_CONF_ND6_MAX_PREFIXES 3 +#endif + +#ifndef UIP_CONF_ND6_MAX_NEIGHBORS +/** Default number of neighbors that can be stored in the %neighbor cache */ +#define UIP_CONF_ND6_MAX_NEIGHBORS 4 +#endif + +#ifndef UIP_CONF_ND6_MAX_DEFROUTERS +/** Minimum number of default routers */ +#define UIP_CONF_ND6_MAX_DEFROUTERS 2 +#endif +/** @} */ + +/*------------------------------------------------------------------------------*/ +/** + * \defgroup uipoptudp UDP configuration options + * @{ + * + * \note The UDP support in uIP is still not entirely complete; there + * is no support for sending or receiving broadcast or multicast + * packets, but it works well enough to support a number of vital + * applications such as DNS queries, though + */ + +/** + * Toggles whether UDP support should be compiled in or not. + * + * \hideinitializer + */ +#ifdef UIP_CONF_UDP +#define UIP_UDP UIP_CONF_UDP +#else /* UIP_CONF_UDP */ +#define UIP_UDP 1 +#endif /* UIP_CONF_UDP */ + +/** + * Toggles if UDP checksums should be used or not. + * + * \note Support for UDP checksums is currently not included in uIP, + * so this option has no function. + * + * \hideinitializer + */ +#ifdef UIP_CONF_UDP_CHECKSUMS +#define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS +#else +#define UIP_UDP_CHECKSUMS 0 +#endif + +/** + * The maximum amount of concurrent UDP connections. + * + * \hideinitializer + */ +#ifdef UIP_CONF_UDP_CONNS +#define UIP_UDP_CONNS UIP_CONF_UDP_CONNS +#else /* UIP_CONF_UDP_CONNS */ +#define UIP_UDP_CONNS 10 +#endif /* UIP_CONF_UDP_CONNS */ + +/** + * The name of the function that should be called when UDP datagrams arrive. + * + * \hideinitializer + */ + + +/** @} */ +/*------------------------------------------------------------------------------*/ +/** + * \defgroup uipopttcp TCP configuration options + * @{ + */ + +/** + * Toggles whether TCP support should be compiled in or not. + * + * \hideinitializer + */ +#ifdef UIP_CONF_TCP +#define UIP_TCP UIP_CONF_TCP +#else /* UIP_CONF_TCP */ +#define UIP_TCP 1 +#endif /* UIP_CONF_TCP */ + +/** + * Determines if support for opening connections from uIP should be + * compiled in. + * + * If the applications that are running on top of uIP for this project + * do not need to open outgoing TCP connections, this configuration + * option can be turned off to reduce the code size of uIP. + * + * \hideinitializer + */ +#ifndef UIP_CONF_ACTIVE_OPEN +#define UIP_ACTIVE_OPEN 1 +#else /* UIP_CONF_ACTIVE_OPEN */ +#define UIP_ACTIVE_OPEN UIP_CONF_ACTIVE_OPEN +#endif /* UIP_CONF_ACTIVE_OPEN */ + +/** + * The maximum number of simultaneously open TCP connections. + * + * Since the TCP connections are statically allocated, turning this + * configuration knob down results in less RAM used. Each TCP + * connection requires approximately 30 bytes of memory. + * + * \hideinitializer + */ +#ifndef UIP_CONF_MAX_CONNECTIONS +#define UIP_CONNS 10 +#else /* UIP_CONF_MAX_CONNECTIONS */ +#define UIP_CONNS UIP_CONF_MAX_CONNECTIONS +#endif /* UIP_CONF_MAX_CONNECTIONS */ + + +/** + * The maximum number of simultaneously listening TCP ports. + * + * Each listening TCP port requires 2 bytes of memory. + * + * \hideinitializer + */ +#ifndef UIP_CONF_MAX_LISTENPORTS +#define UIP_LISTENPORTS 20 +#else /* UIP_CONF_MAX_LISTENPORTS */ +#define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS +#endif /* UIP_CONF_MAX_LISTENPORTS */ + +/** + * Determines if support for TCP urgent data notification should be + * compiled in. + * + * Urgent data (out-of-band data) is a rarely used TCP feature that + * very seldom would be required. + * + * \hideinitializer + */ +#if !defined(UIP_URGDATA) +#define UIP_URGDATA 0 +#endif + +/** + * The initial retransmission timeout counted in timer pulses. + * + * This should not be changed. + */ +#if !defined(UIP_RTO) +#define UIP_RTO 3 +#endif + +/** + * The maximum number of times a segment should be retransmitted + * before the connection should be aborted. + * + * This should not be changed. + */ +#if !defined(UIP_MAXRTX) +#define UIP_MAXRTX 8 +#endif + +/** + * The maximum number of times a SYN segment should be retransmitted + * before a connection request should be deemed to have been + * unsuccessful. + * + * This should not need to be changed. + */ +#if !defined(UIP_MAXSYNRTX) +#define UIP_MAXSYNRTX 5 +#endif + +/** + * The TCP maximum segment size. + * + * This is should not be to set to more than + * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN. + */ +#ifdef UIP_CONF_TCP_MSS +#define UIP_TCP_MSS UIP_CONF_TCP_MSS +#else +#define UIP_TCP_MSS (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN) +#endif + +/** + * The size of the advertised receiver's window. + * + * Should be set low (i.e., to the size of the uip_buf buffer) if the + * application is slow to process incoming data, or high (32768 bytes) + * if the application processes data quickly. + * + * \hideinitializer + */ +#ifndef UIP_CONF_RECEIVE_WINDOW +#define UIP_RECEIVE_WINDOW UIP_TCP_MSS +#else +#define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW +#endif + +/** + * How long a connection should stay in the TIME_WAIT state. + * + * This configuration option has no real implication, and it should be + * left untouched. + */ +#define UIP_TIME_WAIT_TIMEOUT 120 + + +/** @} */ +/*------------------------------------------------------------------------------*/ +/** + * \defgroup uipoptarp ARP configuration options + * @{ + */ + +/** + * The size of the ARP table. + * + * This option should be set to a larger value if this uIP node will + * have many connections from the local network. + * + * \hideinitializer + */ +#ifdef UIP_CONF_ARPTAB_SIZE +#define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE +#else +#define UIP_ARPTAB_SIZE 8 +#endif + +/** + * The maximum age of ARP table entries measured in 10ths of seconds. + * + * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD + * default). + */ +#define UIP_ARP_MAXAGE 120 + + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptmac layer 2 options (for ipv6) + * @{ + */ + +#define UIP_DEFAULT_PREFIX_LEN 64 + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptsics 6lowpan options (for ipv6) + * @{ + */ +/** + * Timeout for packet reassembly at the 6lowpan layer + * (should be < 60s) + */ +#ifdef SICSLOWPAN_CONF_MAXAGE +#define SICSLOWPAN_REASS_MAXAGE SICSLOWPAN_CONF_MAXAGE +#else +#define SICSLOWPAN_REASS_MAXAGE 20 +#endif + +/** + * Do we compress the IP header or not (default: no) + */ +#ifndef SICSLOWPAN_CONF_COMPRESSION +#define SICSLOWPAN_CONF_COMPRESSION 0 +#endif + +/** + * If we use IPHC compression, how many address contexts do we support + */ +#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS +#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1 +#endif + +/** + * Do we support 6lowpan fragmentation + */ +#ifndef SICSLOWPAN_CONF_FRAG +#define SICSLOWPAN_CONF_FRAG 0 +#endif + +/** @} */ + +/*------------------------------------------------------------------------------*/ + +/** + * \defgroup uipoptgeneral General configuration options + * @{ + */ + +/** + * The size of the uIP packet buffer. + * + * The uIP packet buffer should not be smaller than 60 bytes, and does + * not need to be larger than 1514 bytes. Lower size results in lower + * TCP throughput, larger size results in higher TCP throughput. + * + * \hideinitializer + */ +#ifndef UIP_CONF_BUFFER_SIZE +#define UIP_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN +#else /* UIP_CONF_BUFFER_SIZE */ +#define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE +#endif /* UIP_CONF_BUFFER_SIZE */ + + +/** + * Determines if statistics support should be compiled in. + * + * The statistics is useful for debugging and to show the user. + * + * \hideinitializer + */ +#ifndef UIP_CONF_STATISTICS +#define UIP_STATISTICS 0 +#else /* UIP_CONF_STATISTICS */ +#define UIP_STATISTICS UIP_CONF_STATISTICS +#endif /* UIP_CONF_STATISTICS */ + +/** + * Determines if logging of certain events should be compiled in. + * + * This is useful mostly for debugging. The function uip_log() + * must be implemented to suit the architecture of the project, if + * logging is turned on. + * + * \hideinitializer + */ +#ifndef UIP_CONF_LOGGING +#define UIP_LOGGING 0 +#else /* UIP_CONF_LOGGING */ +#define UIP_LOGGING UIP_CONF_LOGGING +#endif /* UIP_CONF_LOGGING */ + +/** + * Broadcast support. + * + * This flag configures IP broadcast support. This is useful only + * together with UDP. + * + * \hideinitializer + * + */ +#ifndef UIP_CONF_BROADCAST +#define UIP_BROADCAST 0 +#else /* UIP_CONF_BROADCAST */ +#define UIP_BROADCAST UIP_CONF_BROADCAST +#endif /* UIP_CONF_BROADCAST */ + +/** + * Print out a uIP log message. + * + * This function must be implemented by the module that uses uIP, and + * is called by uIP whenever a log message is generated. + */ +void uip_log(char *msg); + +/** + * The link level header length. + * + * This is the offset into the uip_buf where the IP header can be + * found. For Ethernet, this should be set to 14. For SLIP, this + * should be set to 0. + * + * \note we probably won't use this constant for other link layers than + * ethernet as they have variable header length (this is due to variable + * number and type of address fields and to optional security features) + * E.g.: 802.15.4 -> 2 + (1/2*4/8) + 0/5/6/10/14 + * 802.11 -> 4 + (6*3/4) + 2 + * \hideinitializer + */ +#ifdef UIP_CONF_LLH_LEN +#define UIP_LLH_LEN UIP_CONF_LLH_LEN +#else /* UIP_LLH_LEN */ +#define UIP_LLH_LEN 14 +#endif /* UIP_CONF_LLH_LEN */ + +/** @} */ +/*------------------------------------------------------------------------------*/ +/** + * \defgroup uipoptcpu CPU architecture configuration + * @{ + * + * The CPU architecture configuration is where the endianess of the + * CPU on which uIP is to be run is specified. Most CPUs today are + * little endian, and the most notable exception are the Motorolas + * which are big endian. The BYTE_ORDER macro should be changed to + * reflect the CPU architecture on which uIP is to be run. + */ + +/** + * The byte order of the CPU architecture on which uIP is to be run. + * + * This option can be either UIP_BIG_ENDIAN (Motorola byte order) or + * UIP_LITTLE_ENDIAN (Intel byte order). + * + * \hideinitializer + */ +#ifdef UIP_CONF_BYTE_ORDER +#define UIP_BYTE_ORDER UIP_CONF_BYTE_ORDER +#else /* UIP_CONF_BYTE_ORDER */ +#define UIP_BYTE_ORDER UIP_LITTLE_ENDIAN +#endif /* UIP_CONF_BYTE_ORDER */ + +/** @} */ +/*------------------------------------------------------------------------------*/ + +#include <ff.h> +#include <stdbool.h> +#include <stdint.h> + +#include "timer.h" + +typedef uint8_t u8_t; +typedef uint16_t u16_t; +typedef uint32_t u32_t; +typedef uint32_t uip_stats_t; + +/** + * \defgroup uipoptapp Application specific configurations + * @{ + * + * An uIP application is implemented using a single application + * function that is called by uIP whenever a TCP/IP event occurs. The + * name of this function must be registered with uIP at compile time + * using the UIP_APPCALL definition. + * + * uIP applications can store the application state within the + * uip_conn structure by specifying the type of the application + * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t. + * + * The file containing the definitions must be included in the + * uipopt.h file. + * + * The following example illustrates how this can look. + \code + + void httpd_appcall(void); + #define UIP_APPCALL httpd_appcall + + struct httpd_state { + u8_t state; + u16_t count; + char *dataptr; + char *script; + }; + typedef struct httpd_state uip_tcp_appstate_t + \endcode +*/ +#define UIP_UDP_APPCALL uIPManagement_UDPCallback +void UIP_UDP_APPCALL(void); + +/** + * \var #define UIP_APPCALL + * + * The name of the application function that uIP should call in + * response to TCP/IP events. + * + */ +#define UIP_APPCALL uIPManagement_TCPCallback +void UIP_APPCALL(void); + +/** + * \var typedef uip_tcp_appstate_t + * + * The type of the application state that is to be stored in the + * uip_conn structure. This usually is typedef:ed to a struct holding + * application state information. + */ +typedef union +{ + struct + { + uint8_t CurrentState; + uint8_t NextState; + + char FileName[MAX_URI_LENGTH]; + FIL FileHandle; + bool FileOpen; + uint32_t ACKedFilePos; + uint16_t SentChunkSize; + } HTTPServer; + + struct + { + uint8_t CurrentState; + uint8_t NextState; + + uint8_t IssuedCommand; + } TELNETServer; +} uip_tcp_appstate_t; + +/** + * \var typedef uip_udp_appstate_t + * + * The type of the application state that is to be stored in the + * uip_conn structure. This usually is typedef:ed to a struct holding + * application state information. + */ +typedef union +{ + struct + { + uint8_t CurrentState; + struct timer Timeout; + + struct + { + uint8_t AllocatedIP[4]; + uint8_t Netmask[4]; + uint8_t GatewayIP[4]; + uint8_t ServerIP[4]; + } DHCPOffer_Data; + } DHCPClient; +} uip_udp_appstate_t; +/** @} */ + +#endif /* __UIPOPT_H__ */ +/** @} */ +/** @} */ + diff --git a/lib/lufa/Projects/Webserver/USBDeviceMode.c b/lib/lufa/Projects/Webserver/USBDeviceMode.c new file mode 100644 index 000000000..c883f1441 --- /dev/null +++ b/lib/lufa/Projects/Webserver/USBDeviceMode.c @@ -0,0 +1,162 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Mode management functions and variables. This file contains the LUFA code required to + * manage the USB Mass Storage device mode. + */ + +#include "USBDeviceMode.h" + +/** Message buffer for RNDIS messages processed by the RNDIS device class driver. */ +static uint8_t RNDIS_Message_Buffer[192]; + +/** LUFA RNDIS Class driver interface configuration and state information. This structure is + * passed to all RNDIS Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device = + { + .Config = + { + .ControlInterfaceNumber = INTERFACE_ID_CDC_CCI, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, + .AdapterVendorDescription = "LUFA RNDIS Adapter", + .AdapterMACAddress = {{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}}, + .MessageBuffer = RNDIS_Message_Buffer, + .MessageBufferLength = sizeof(RNDIS_Message_Buffer), + }, + }; + +/** LUFA Mass Storage Class driver interface configuration and state information. This structure is + * passed to all Mass Storage Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_MS_Device_t Disk_MS_Interface = + { + .Config = + { + .InterfaceNumber = INTERFACE_ID_MassStorage, + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .TotalLUNs = 1, + }, + }; + + +/** USB device mode management task. This function manages the Mass Storage Device class driver when the device is + * initialized in USB device mode. + */ +void USBDeviceMode_USBTask(void) +{ + if (USB_CurrentMode != USB_MODE_Device) + return; + + uIPManagement_ManageNetwork(); + + RNDIS_Device_USBTask(&Ethernet_RNDIS_Interface_Device); + MS_Device_USBTask(&Disk_MS_Interface); +} + +/** Event handler for the library USB Connection event. */ +void EVENT_USB_Device_Connect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); + + uIPManagement_Init(); +} + +/** Event handler for the library USB Disconnection event. */ +void EVENT_USB_Device_Disconnect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + ConfigSuccess &= RNDIS_Device_ConfigureEndpoints(&Ethernet_RNDIS_Interface_Device); + ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface); + + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); +} + +/** Event handler for the library USB Control Request reception event. */ +void EVENT_USB_Device_ControlRequest(void) +{ + RNDIS_Device_ProcessControlRequest(&Ethernet_RNDIS_Interface_Device); + MS_Device_ProcessControlRequest(&Disk_MS_Interface); +} + +/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface configuration structure being referenced + */ +bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + bool CommandSuccess; + + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); + LEDs_SetAllLEDs(LEDMASK_USB_READY); + + return CommandSuccess; +} + diff --git a/lib/lufa/Projects/Webserver/USBDeviceMode.h b/lib/lufa/Projects/Webserver/USBDeviceMode.h new file mode 100644 index 000000000..f71490333 --- /dev/null +++ b/lib/lufa/Projects/Webserver/USBDeviceMode.h @@ -0,0 +1,62 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for USBDeviceMode.c. + */ + +#ifndef _USBDEVICEMODE_H_ +#define _USBDEVICEMODE_H_ + + /* Includes: */ + #include <LUFA/Drivers/USB/USB.h> + + #include "Webserver.h" + #include "Descriptors.h" + #include "Lib/uIPManagement.h" + #include "Lib/SCSI.h" + #include "Config/AppConfig.h" + + /* External Variables: */ + extern USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device; + + /* Function Prototypes: */ + void USBDeviceMode_USBTask(void); + + void EVENT_USB_Device_Connect(void); + void EVENT_USB_Device_Disconnect(void); + void EVENT_USB_Device_ConfigurationChanged(void); + void EVENT_USB_Device_ControlRequest(void); + + bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + +#endif + diff --git a/lib/lufa/Projects/Webserver/USBHostMode.c b/lib/lufa/Projects/Webserver/USBHostMode.c new file mode 100644 index 000000000..04190bfe2 --- /dev/null +++ b/lib/lufa/Projects/Webserver/USBHostMode.c @@ -0,0 +1,172 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Host Mode management functions and variables. This file contains the LUFA code required to + * manage the USB RNDIS host mode. + */ + +#include "USBHostMode.h" + +/** LUFA RNDIS Class driver interface configuration and state information. This structure is + * passed to all RNDIS Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host = + { + .Config = + { + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .NotificationPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, + .HostMaxPacketSize = UIP_CONF_BUFFER_SIZE, + }, + }; + + +/** USB host mode management task. This function manages the RNDIS Host class driver and uIP stack when the device is + * initialized in USB host mode. + */ +void USBHostMode_USBTask(void) +{ + if (USB_CurrentMode != USB_MODE_Host) + return; + + uIPManagement_ManageNetwork(); + + RNDIS_Host_USBTask(&Ethernet_RNDIS_Interface_Host); +} + +/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and + * starts the library USB task to begin the enumeration and USB management process. + */ +void EVENT_USB_Host_DeviceAttached(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and + * stops the library USB task management process. + */ +void EVENT_USB_Host_DeviceUnattached(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully + * enumerated by the host and is now ready to be used by the application. + */ +void EVENT_USB_Host_DeviceEnumerationComplete(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); + + uint16_t ConfigDescriptorSize; + uint8_t ConfigDescriptorData[512]; + + if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, + sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) + { + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + return; + } + + if (RNDIS_Host_ConfigurePipes(&Ethernet_RNDIS_Interface_Host, + ConfigDescriptorSize, ConfigDescriptorData) != RNDIS_ENUMERROR_NoError) + { + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + return; + } + + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) + { + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + return; + } + + if (RNDIS_Host_InitializeDevice(&Ethernet_RNDIS_Interface_Host) != HOST_SENDCONTROL_Successful) + { + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + USB_Host_SetDeviceConfiguration(0); + return; + } + + uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST); + if (RNDIS_Host_SetRNDISProperty(&Ethernet_RNDIS_Interface_Host, OID_GEN_CURRENT_PACKET_FILTER, + &PacketFilter, sizeof(PacketFilter)) != HOST_SENDCONTROL_Successful) + { + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + USB_Host_SetDeviceConfiguration(0); + return; + } + + if (RNDIS_Host_QueryRNDISProperty(&Ethernet_RNDIS_Interface_Host, OID_802_3_CURRENT_ADDRESS, + &MACAddress, sizeof(MACAddress)) != HOST_SENDCONTROL_Successful) + { + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + USB_Host_SetDeviceConfiguration(0); + return; + } + + /* Initialize uIP stack */ + uIPManagement_Init(); + + LEDs_SetAllLEDs(LEDMASK_USB_READY); +} + +/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ +void EVENT_USB_Host_HostError(const uint8_t ErrorCode) +{ + USB_Disable(); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + for(;;); +} + +/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while + * enumerating an attached USB device. + */ +void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); +} + diff --git a/lib/lufa/Projects/Webserver/USBHostMode.h b/lib/lufa/Projects/Webserver/USBHostMode.h new file mode 100644 index 000000000..b2c8d66ec --- /dev/null +++ b/lib/lufa/Projects/Webserver/USBHostMode.h @@ -0,0 +1,60 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for USBHostMode.c. + */ + +#ifndef _USBHOSTMODE_H_ +#define _USBHOSTMODE_H_ + + /* Includes: */ + #include <LUFA/Drivers/USB/USB.h> + + #include "Webserver.h" + #include "Lib/uIPManagement.h" + #include "Config/AppConfig.h" + + /* External Variables: */ + extern USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host; + + /* Function Prototypes: */ + void USBHostMode_USBTask(void); + + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); + void EVENT_USB_Host_DeviceAttached(void); + void EVENT_USB_Host_DeviceUnattached(void); + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode); + void EVENT_USB_Host_DeviceEnumerationComplete(void); + +#endif + diff --git a/lib/lufa/Projects/Webserver/Webserver.c b/lib/lufa/Projects/Webserver/Webserver.c new file mode 100644 index 000000000..bd8fa24ce --- /dev/null +++ b/lib/lufa/Projects/Webserver/Webserver.c @@ -0,0 +1,77 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the Webserver project. This file contains the main tasks of + * the project and is responsible for the initial application hardware configuration. + */ + +#include "Webserver.h" + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + for (;;) + { + if (USB_CurrentMode == USB_MODE_Host) + USBHostMode_USBTask(); + else + USBDeviceMode_USBTask(); + + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ +#if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#endif + + /* Hardware Initialization */ + Dataflash_Init(); + LEDs_Init(); + USB_Init(USB_MODE_UID); +} + diff --git a/lib/lufa/Projects/Webserver/Webserver.h b/lib/lufa/Projects/Webserver/Webserver.h new file mode 100644 index 000000000..0438fe0b9 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Webserver.h @@ -0,0 +1,76 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Webserver.c. + */ + +#ifndef _WEBSERVER_H_ +#define _WEBSERVER_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/wdt.h> + #include <avr/pgmspace.h> + #include <avr/power.h> + #include <avr/interrupt.h> + + #include <LUFA/Drivers/Board/LEDs.h> + #include <LUFA/Drivers/Board/Dataflash.h> + #include <LUFA/Drivers/Peripheral/SPI.h> + #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> + + #include "USBDeviceMode.h" + #include "USBHostMode.h" + #include "Config/AppConfig.h" + + /* Macros: */ + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ + #define LEDMASK_USB_NOTREADY LEDS_LED1 + + /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ + #define LEDMASK_USB_ENUMERATING (LEDS_LED1 | LEDS_LED2) + + /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ + #define LEDMASK_USB_READY LEDS_LED2 + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ + #define LEDMASK_USB_BUSY (LEDS_LED1 | LEDS_LED3 | LEDS_LED4) + + /* Function Prototypes: */ + void SetupHardware(void); + +#endif + diff --git a/lib/lufa/Projects/Webserver/Webserver.txt b/lib/lufa/Projects/Webserver/Webserver.txt new file mode 100644 index 000000000..10aa71652 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Webserver.txt @@ -0,0 +1,126 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage uIP Powered Webserver Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Dual Mode Host/Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Communications Device Class (CDC) \n + * Mass Storage Device</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard) \n + * Bulk-Only Transport</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>Microsoft RNDIS Specification \n + * USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Simple HTTP webserver project. This project combines the LUFA library with the uIP TCP/IP full network stack and FatFS + * library to create a RNDIS host capable of serving out HTTP web pages to multiple hosts simultaneously. This project + * demonstrates how the libraries can be combined into a robust network enabled application, with the addition of a RNDIS + * network device. + * + * To use this project, plug the USB AVR into a computer, so that it enumerates as a standard Mass Storage and RNDIS composite + * device. Load HTML files onto the disk, so that they can be served out to clients -- the default file to serve should be called + * <i>index.htm</i>. Filenames must be in 8.3 format for them to be retrieved correctly by the webserver, and the total + * requested file path must be equal to or less than the maximum URI length (\see \ref Sec_Options). Supply the included INF + * file when requested on Windows machines to enable the RNDIS interface, and allow the files to be viewed on a standard web-browser + * using the IP address 10.0.0.2. + * + * When attached to a RNDIS class device, such as a USB (desktop) modem, the system will enumerate the device, set the + * appropriate parameters needed for connectivity and begin listening for new HTTP connections on port 80 and TELNET + * connections on port 23. The device IP, netmask and default gateway IP must be set to values appropriate for the RNDIS + * device being used for this project to work if the DHCP client is disabled (see \ref Sec_Options) - otherwise, the device + * will query the network's DHCP server for these parameters automatically. + * + * When properly configured, the webserver can be accessed from any HTTP web browser by typing in the device's statically or + * dynamically allocated IP address. The TELNET client can be accessed via any network socket app by connecting to the device + * on port 23 on the device's statically or dynamically allocated IP address. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <th><b>Define Name:</b></th> + * <th><b>Location:</b></th> + * <th><b>Description:</b></th> + * </tr> + * <tr> + * <td>ENABLE_TELNET_SERVER</td> + * <td>AppConfig.h</td> + * <td>When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections + * and processes user commands.</td> + * </tr> + * <tr> + * <td>ENABLE_DHCP_CLIENT</td> + * <td>AppConfig.h</td> + * <td>When defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.</td> + * </tr> + * <tr> + * <td>ENABLE_DHCP_SERVER</td> + * <td>AppConfig.h</td> + * <td>When defined, this enables the DHCP server for dynamic IP allocation of the network settings to a DHCP client.</td> + * </tr> + * <tr> + * <td>DEVICE_IP_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td> + * </tr> + * <tr> + * <td>DEVICE_NETMASK</td> + * <td>AppConfig.h</td> + * <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td> + * </tr> + * <tr> + * <td>DEVICE_GATEWAY</td> + * <td>AppConfig.h</td> + * <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT + * is not defined).</td> + * </tr> + * <tr> + * <td>MAX_URI_LENGTH</td> + * <td>AppConfig.h</td> + * <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.</td> + * </tr> + * <tr> + * <td>SERVER_MAC_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>MAC address of the server used when sending Ethernet packets onto the bus.</td> + * </tr> + * </table> + */ + diff --git a/lib/lufa/Projects/Webserver/asf.xml b/lib/lufa/Projects/Webserver/asf.xml new file mode 100644 index 000000000..ca1733e85 --- /dev/null +++ b/lib/lufa/Projects/Webserver/asf.xml @@ -0,0 +1,96 @@ +<asf xmlversion="1.0"> + <project caption="RNDIS Webserver" id="lufa.projects.webserver.avr8"> + <require idref="lufa.projects.webserver"/> + <require idref="lufa.boards.dummy.avr8"/> + <generator value="as5_8"/> + + <device-support value="at90usb1287"/> + <config name="lufa.drivers.board.name" value="usbkey"/> + + <build type="define" name="F_CPU" value="8000000UL"/> + <build type="define" name="F_USB" value="8000000UL"/> + </project> + + <module type="application" id="lufa.projects.webserver" caption="RNDIS Webserver"> + <info type="description" value="summary"> + RNDIS Webserver project, using the open source uIP network stack. + </info> + + <info type="gui-flag" value="move-to-root"/> + + <info type="keyword" value="Technology"> + <keyword value="Class Driver APIs"/> + <keyword value="USB Dual Role"/> + <keyword value="RNDIS Class"/> + <keyword value="Mass Storage Class"/> + </info> + + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="distribute" subtype="user-file" value="doxyfile"/> + <build type="distribute" subtype="user-file" value="Webserver.txt"/> + <build type="distribute" subtype="user-file" value="LUFA Webserver RNDIS.inf"/> + + <build type="c-source" value="Webserver.c"/> + <build type="c-source" value="USBDeviceMode.c"/> + <build type="c-source" value="USBHostMode.c"/> + <build type="c-source" value="Descriptors.c"/> + <build type="header-file" value="Webserver.h"/> + <build type="header-file" value="USBDeviceMode.h"/> + <build type="header-file" value="USBHostMode.h"/> + <build type="header-file" value="Descriptors.h"/> + + <build type="c-source" value="Lib/DataflashManager.c"/> + <build type="header-file" value="Lib/DataflashManager.h"/> + <build type="c-source" value="Lib/DHCPClientApp.c"/> + <build type="header-file" value="Lib/DHCPClientApp.h"/> + <build type="c-source" value="Lib/DHCPCommon.c"/> + <build type="header-file" value="Lib/DHCPCommon.h"/> + <build type="c-source" value="Lib/DHCPServerApp.c"/> + <build type="header-file" value="Lib/DHCPServerApp.h"/> + <build type="c-source" value="Lib/HTTPServerApp.c"/> + <build type="header-file" value="Lib/HTTPServerApp.h"/> + <build type="c-source" value="Lib/SCSI.c"/> + <build type="header-file" value="Lib/SCSI.h"/> + <build type="c-source" value="Lib/TELNETServerApp.c"/> + <build type="header-file" value="Lib/TELNETServerApp.h"/> + <build type="c-source" value="Lib/uIPManagement.c"/> + <build type="header-file" value="Lib/uIPManagement.h"/> + + <build type="include-path" value="Lib/FATFs/"/> + <build type="c-source" value="Lib/FATFs/ff.c"/> + <build type="header-file" value="Lib/FATFs/ff.h"/> + <build type="c-source" value="Lib/FATFs/diskio.c"/> + <build type="header-file" value="Lib/FATFs/diskio.h"/> + <build type="header-file" value="Lib/FATFs/ffconf.h"/> + <build type="header-file" value="Lib/FATFs/integer.h"/> + + <build type="include-path" value="Lib/uip/"/> + <build type="c-source" value="Lib/uip/clock.c"/> + <build type="header-file" value="Lib/uip/clock.h"/> + <build type="c-source" value="Lib/uip/timer.c"/> + <build type="header-file" value="Lib/uip/timer.h"/> + <build type="c-source" value="Lib/uip/uip.c"/> + <build type="header-file" value="Lib/uip/uip.h"/> + <build type="c-source" value="Lib/uip/uip_arp.c"/> + <build type="header-file" value="Lib/uip/uip_arp.h"/> + <build type="c-source" value="Lib/uip/uip-split.c"/> + <build type="header-file" value="Lib/uip/uip-split.h"/> + <build type="header-file" value="Lib/uip/uipopt.h"/> + + <build type="module-config" subtype="path" value="Config"/> + <build type="module-config" subtype="required-header-file" value="AppConfig.h"/> + <build type="header-file" value="Config/AppConfig.h"/> + <build type="header-file" value="Config/LUFAConfig.h"/> + + <require idref="lufa.common"/> + <require idref="lufa.platform"/> + <require idref="lufa.drivers.usb"/> + <require idref="lufa.drivers.board"/> + <require idref="lufa.drivers.board.leds"/> + <require idref="lufa.drivers.board.dataflash"/> + <require idref="lufa.drivers.peripheral.spi"/> + </module> +</asf> diff --git a/lib/lufa/Projects/Webserver/doxyfile b/lib/lufa/Projects/Webserver/doxyfile new file mode 100644 index 000000000..0f01c93b3 --- /dev/null +++ b/lib/lufa/Projects/Webserver/doxyfile @@ -0,0 +1,2396 @@ +# Doxyfile 1.8.9 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "LUFA Library - uIP Powered Webserver Project" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./Documentation/ + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = NO + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = NO + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = *.h \ + *.c \ + *.txt + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = Documentation/ + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = */uip/* \ + */FATFs/* + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = __* \ + INCLUDE_FROM_* + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = NO + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# compiled with the --with-libclang option. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = YES + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = YES + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = YES + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 1 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. To get the times font for +# instance you can specify +# EXTRA_PACKAGES=times +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = __DOXYGEN__ \ + PROGMEM + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = NO + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = NO + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = NO + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = NO + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = NO + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = NO + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = NO + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = NO + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif and svg. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 15 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 2 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES diff --git a/lib/lufa/Projects/Webserver/makefile b/lib/lufa/Projects/Webserver/makefile new file mode 100644 index 000000000..852d011bc --- /dev/null +++ b/lib/lufa/Projects/Webserver/makefile @@ -0,0 +1,46 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2017. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = at90usb1287 +ARCH = AVR8 +BOARD = USBKEY +F_CPU = 8000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = Webserver +SRC = $(TARGET).c Descriptors.c USBDeviceMode.c USBHostMode.c Lib/SCSI.c Lib/DataflashManager.c \ + Lib/uIPManagement.c Lib/DHCPCommon.c Lib/DHCPClientApp.c Lib/DHCPServerApp.c Lib/HTTPServerApp.c \ + Lib/TELNETServerApp.c Lib/uip/uip.c Lib/uip/uip_arp.c Lib/uip/timer.c Lib/uip/clock.c \ + Lib/uip/uip-split.c Lib/FATFs/diskio.c Lib/FATFs/ff.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) +LUFA_PATH = ../../LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -ILib/uip/ -ILib/FATFs/ +LD_FLAGS = + +# Default target +all: + +# Include LUFA-specific DMBS extension modules +DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA +include $(DMBS_LUFA_PATH)/lufa-sources.mk +include $(DMBS_LUFA_PATH)/lufa-gcc.mk + +# Include common DMBS build system modules +DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/core.mk +include $(DMBS_PATH)/cppcheck.mk +include $(DMBS_PATH)/doxygen.mk +include $(DMBS_PATH)/dfu.mk +include $(DMBS_PATH)/gcc.mk +include $(DMBS_PATH)/hid.mk +include $(DMBS_PATH)/avrdude.mk +include $(DMBS_PATH)/atprogram.mk |