diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/qwertyydox/config.h | 199 | ||||
| -rw-r--r-- | keyboards/qwertyydox/info.json | 58 | ||||
| -rw-r--r-- | keyboards/qwertyydox/keymaps/default/config.h | 14 | ||||
| -rw-r--r-- | keyboards/qwertyydox/keymaps/default/keymap.c | 40 | ||||
| -rw-r--r-- | keyboards/qwertyydox/qwertyydox.h | 23 | ||||
| -rw-r--r-- | keyboards/qwertyydox/rev1/config.h | 70 | ||||
| -rw-r--r-- | keyboards/qwertyydox/rev1/rev1.h | 15 | ||||
| -rw-r--r-- | keyboards/qwertyydox/rev1/rules.mk | 1 | ||||
| -rw-r--r-- | keyboards/qwertyydox/rules.mk | 4 |
9 files changed, 265 insertions, 159 deletions
diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h index 67f5d3c16..346795214 100644 --- a/keyboards/qwertyydox/config.h +++ b/keyboards/qwertyydox/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H +#pragma once #include "config_common.h" @@ -33,6 +32,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 8 #define MATRIX_COLS 7 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ // wiring of each half #define MATRIX_ROW_PINS { B6, B2, B3, B1 } #define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 } @@ -40,30 +49,139 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 +// #define BACKLIGHT_PIN E6 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 5 -/* Set 0 if debouncing isn't needed */ +#define RGB_DI_PIN D6 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 12 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS + // /*== or choose animations ==*/ + // #define RGBLIGHT_EFFECT_BREATHING + // #define RGBLIGHT_EFFECT_RAINBOW_MOOD + // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + // #define RGBLIGHT_EFFECT_SNAKE + // #define RGBLIGHT_EFFECT_KNIGHT + // #define RGBLIGHT_EFFECT_CHRISTMAS + // #define RGBLIGHT_EFFECT_STATIC_GRADIENT + // #define RGBLIGHT_EFFECT_RGB_TEST + // #define RGBLIGHT_EFFECT_ALTERNATING + // /*== customize breathing effect ==*/ + // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ + // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 + // /*==== use exp() and sin() ====*/ + // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 + // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define BACKLIGHT_PIN E6 -#define BACKLIGHT_LEVELS 5 +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE -/* ws2812 RGB LED */ -#define RGB_DI_PIN D6 +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) -#define RGBLED_NUM 12 // Number of LEDs +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +#define MOUSEKEY_DELAY 150 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 10 +#define MOUSEKEY_TIME_TO_MAX 10 +#define MOUSEKEY_WHEEL_MAX_SPEED 8 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 /* * Feature disable options @@ -83,4 +201,57 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line #endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/qwertyydox/info.json b/keyboards/qwertyydox/info.json index 3dd6b3ec7..8616f274e 100644 --- a/keyboards/qwertyydox/info.json +++ b/keyboards/qwertyydox/info.json @@ -5,12 +5,66 @@ "url": "", "maintainer": "qmk", "processor": "atmega32u4", - "width": 16, + "width": 16.25, "height": 5, "layouts": { "LAYOUT": { "key_count": 53, - "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.25}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.5}, {"label":"R00", "x":9, "y":0.5}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.25}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.25}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.5}, {"label":"R10", "x":9, "y":1.5}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.25}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.25}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6.5, "y":3}, {"label":"R20", "x":8.5, "y":3}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.25}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.25}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":5.5, "y":4}, {"label":"L35", "x":6.5, "y":4}, {"label":"R30", "x":8.5, "y":4}, {"label":"R31", "x":9.5, "y":4}, {"label":"R32", "x":12, "y":3}, {"label":"R33", "x":13, "y":3.125}, {"label":"R34", "x":14, "y":3.25}, {"label":"R35", "x":15, "y":3.375}] + "layout": [ + {"label":"Tab", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"Y", "x":9, "y":0}, + {"label":"U", "x":10, "y":0}, + {"label":"I", "x":11, "y":0}, + {"label":"O", "x":12, "y":0}, + {"label":"P", "x":13, "y":0}, + {"label":"{", "x":14, "y":0}, + {"label":"}", "x":15, "y":0}, + {"label":"Caps Lock", "x":0.25, "y":1}, + {"label":"A", "x":1.25, "y":1}, + {"label":"S", "x":2.25, "y":1}, + {"label":"D", "x":3.25, "y":1}, + {"label":"F", "x":4.25, "y":1}, + {"label":"G", "x":5.25, "y":1}, + {"label":"H", "x":9.25, "y":1}, + {"label":"J", "x":10.25, "y":1}, + {"label":"K", "x":11.25, "y":1}, + {"label":"L", "x":12.25, "y":1}, + {"label":":", "x":13.25, "y":1}, + {"label":"\"", "x":14.25, "y":1}, + {"label":"|", "x":15.25, "y":1}, + {"label":"Shift", "x":0.75, "y":2}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":9.75, "y":2}, + {"label":"M", "x":10.75, "y":2}, + {"label":"<", "x":11.75, "y":2}, + {"label":">", "x":12.75, "y":2}, + {"label":"?", "x":13.75, "y":2}, + {"label":"Shift", "x":14.75, "y":2}, + {"label":"Ctrl", "x":0.75, "y":3}, + {"label":"GUI", "x":1.75, "y":3}, + {"label":"Alt", "x":2.75, "y":3}, + {"label":"\"-QWERTY\"", "x":3.75, "y":3}, + {"label":"Enter", "x":4.75, "y":3.33}, + {"label":"Delete", "x":5.75, "y":3.67}, + {"label":"TO(_NUM)", "x":6.75, "y":4}, + {"label":"TO(_NAV)", "x":8.75, "y":4}, + {"label":"Space", "x":9.75, "y":3.67}, + {"label":"Back Space", "x":10.75, "y":3.33}, + {"label":"Left", "x":11.75, "y":3}, + {"label":"Alt", "x":12.75, "y":3}, + {"label":"GUI", "x":13.75, "y":3}, + {"label":"Ctrl", "x":14.75, "y":3} + ] } } } diff --git a/keyboards/qwertyydox/keymaps/default/config.h b/keyboards/qwertyydox/keymaps/default/config.h index 6b4e3fe96..cc85e4e2e 100644 --- a/keyboards/qwertyydox/keymaps/default/config.h +++ b/keyboards/qwertyydox/keymaps/default/config.h @@ -27,17 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define MASTER_LEFT #define MASTER_RIGHT // #define EE_HANDS - -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -#define MOUSEKEY_DELAY 150 -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 10 -#define MOUSEKEY_TIME_TO_MAX 10 -#define MOUSEKEY_WHEEL_MAX_SPEED 8 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
\ No newline at end of file diff --git a/keyboards/qwertyydox/keymaps/default/keymap.c b/keyboards/qwertyydox/keymaps/default/keymap.c index 5967c5146..f5381bf7d 100644 --- a/keyboards/qwertyydox/keymaps/default/keymap.c +++ b/keyboards/qwertyydox/keymaps/default/keymap.c @@ -2,9 +2,12 @@ extern keymap_config_t keymap_config; -#define _QWERTY 0 -#define _NUM 1 -#define _NAV 2 +enum layer_names { + _QWERTY, + _NUM, + _NAV +}; + enum custom_keycodes { qwerty = SAFE_RANGE, nav, @@ -12,17 +15,6 @@ enum custom_keycodes { EQL }; -// #define KC_ KC_TRNS -#define __ KC_NO -#define NAV TO(2) -#define NUM TO(1) -#define ALPHA TO(0) -#define NPLUS KC_KP_PLUS -#define NMINUS KC_KP_MINUS -#define NSTAR KC_KP_ASTERISK -#define NSLASH KC_KP_SLASH - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT( @@ -31,33 +23,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, __, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LCTL, KC_LGUI, KC_LALT, qwerty, KC_ENT, KC_DEL, NUM, NAV, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL + KC_LCTL, KC_LGUI, KC_LALT, qwerty, KC_ENT, KC_DEL, TO(1), TO(2), KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' ), [_NUM] = LAYOUT( //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NO, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NO, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, __, KC_NO, KC_PPLS, KC_PMNS, EQL, KC_PAST, KC_PSLS, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PPLS, KC_PMNS, EQL, KC_PAST, KC_PSLS, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_LCTL, KC_ESC, KC_NO, num, KC_ENT, KC_LSFT, NAV, ALPHA, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL + KC_LCTL, KC_ESC, KC_NO, num, KC_ENT, KC_LSFT, TO(2), TO(0), KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' ), [_NAV] = LAYOUT( //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. - KC_ESC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_WH_L, KC_WH_R, KC_ESC, KC_NO, KC_UP, NSLASH, NSTAR, NMINUS, NPLUS, + KC_ESC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_WH_L, KC_WH_R, KC_ESC, KC_NO, KC_UP, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_WH_U, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, + KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_WH_U, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_INS, KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2, KC_WH_D, __, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, KC_NO, KC_NO, + KC_INS, KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2, KC_WH_D, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, KC_NO, KC_NO, //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| - KC_DEL, KC_END, KC_PGDN, nav, KC_LCTL, KC_SPC, ALPHA, NUM, KC_LSFT, KC_BSPC, KC_NO, KC_NO, KC_NO, RESET + KC_DEL, KC_END, KC_PGDN, nav, KC_LCTL, KC_SPC, TO(0), TO(1), KC_LSFT, KC_BSPC, KC_NO, KC_NO, KC_NO, RESET //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' ) }; diff --git a/keyboards/qwertyydox/qwertyydox.h b/keyboards/qwertyydox/qwertyydox.h index 57bd0dc54..9eb4073df 100644 --- a/keyboards/qwertyydox/qwertyydox.h +++ b/keyboards/qwertyydox/qwertyydox.h @@ -1,24 +1,7 @@ -#ifndef QWERTYYDOX_H -#define QWERTYYDOX_H +#pragma once + +#include "quantum.h" #ifdef KEYBOARD_qwertyydox_rev1 #include "rev1.h" #endif - -#include "quantum.h" - -// Used to create a keymap using only KC_ prefixed keys -#define LAYOUT_kc( \ - L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ - L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ - L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ - L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ - ) - -#endif
\ No newline at end of file diff --git a/keyboards/qwertyydox/rev1/config.h b/keyboards/qwertyydox/rev1/config.h index 703d62de7..b749fffcb 100644 --- a/keyboards/qwertyydox/rev1/config.h +++ b/keyboards/qwertyydox/rev1/config.h @@ -15,72 +15,4 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H - -#include QMK_KEYBOARD_CONFIG_H - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCEEB -#define PRODUCT_ID 0x1256 -#define DEVICE_VER 0x0100 -#define MANUFACTURER AYDENandDAD -#define PRODUCT QWERTYdox Keyboard -#define DESCRIPTION Split 40 percent keyboard - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 7 - -// wiring of each half -#define MATRIX_ROW_PINS { B6, B2, B3, B1 } -#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define BACKLIGHT_PIN E6 -#define BACKLIGHT_LEVELS 5 - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D6 - -#define RGBLED_NUM 12 // Number of LEDs - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif +#pragma once diff --git a/keyboards/qwertyydox/rev1/rev1.h b/keyboards/qwertyydox/rev1/rev1.h index d620e6210..a7b30b648 100644 --- a/keyboards/qwertyydox/rev1/rev1.h +++ b/keyboards/qwertyydox/rev1/rev1.h @@ -1,12 +1,7 @@ -#ifndef REV1_H -#define REV1_H +#pragma once #include "qwertyydox.h" -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - - #ifdef USE_I2C #include <stddef.h> #ifdef __AVR__ @@ -15,12 +10,10 @@ #endif #endif -//void promicro_bootloader_jmp(bool program); - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, R16, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, R26, \ + L20, L21, L22, L23, L24, L25, R21, R22, R23, R24, R25, R26, \ L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \ ) \ { \ @@ -30,8 +23,6 @@ { L30, L31, L32, L33, L34, L35, L36 }, \ { R06, R05, R04, R03, R02, R01, R00 }, \ { R16, R15, R14, R13, R12, R11, R10 }, \ - { R26, R25, R24, R23, R22, R21, R20, }, \ + { R26, R25, R24, R23, R22, R21, KC_NO, }, \ { R36, R35, R34, R33, R32, R31, R30 } \ } - -#endif diff --git a/keyboards/qwertyydox/rev1/rules.mk b/keyboards/qwertyydox/rev1/rules.mk index 7b30c0bef..e69de29bb 100644 --- a/keyboards/qwertyydox/rev1/rules.mk +++ b/keyboards/qwertyydox/rev1/rules.mk @@ -1 +0,0 @@ -BACKLIGHT_ENABLE = no diff --git a/keyboards/qwertyydox/rules.mk b/keyboards/qwertyydox/rules.mk index 7cc070ba5..fcd3d708e 100644 --- a/keyboards/qwertyydox/rules.mk +++ b/keyboards/qwertyydox/rules.mk @@ -52,14 +52,12 @@ EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = yes -USE_I2C = yes # I2C is used between the sides # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend |